• 제목/요약/키워드: packing

검색결과 1,960건 처리시간 0.022초

Ni-Zn-Cu계 페라이트 시트에서 충진 밀도에 따른 시트 휨 현상 (The Effect of Packing Density on the Warpage Behavior of Ni-Zn-Cu Ferrite Sheets)

  • 김시연;여동훈;신효순;송우창;윤호규
    • 한국전기전자재료학회논문지
    • /
    • 제28권12호
    • /
    • pp.781-786
    • /
    • 2015
  • It is necessary for ferrite sheets to be fabricated with high packing density for excellent electrical properties and high strength. In this study, the relationship between the warpage and the packing density of ferrite green sheet, was investigated with amount variation of organic additives. With 0.4 wt% of dispersant, the packing density was about 48% and warpage appeared 0.5~1.3 mm high. With 1.4 wt% of dispersant, the packing density increased up to 57% and warpage appeared 0.8~2.1 mm high. With high packing density, warpage appeared along the edges of specimen, while with low packing density, deformation appeared over whole specimen inhomogeneously. It is thought that inhomogeneous deformation after sintering came from the inhomogeneity in green sheet prepared with badly dispersed slurry. With good homogeneity in green sheet from well-dispersed slurry, isotropic shrinkage is thought to have occurred along the distance from center to edges of specimen during sintering.

Packing placement method using hybrid genetic algorithm for segments of waste components in nuclear reactor decommissioning

  • Kim, Hyong Chol;Han, Sam Hee;Lee, Young Jin;Kim, Dai Il
    • Nuclear Engineering and Technology
    • /
    • 제54권9호
    • /
    • pp.3242-3249
    • /
    • 2022
  • As Kori unit 1 is undergoing the decommissioning process, estimating the disposal amount of waste from the decommissioned nuclear reactor has become one of the challenging issues. Since the waste disposal amount estimation depends on the packing of the waste, it is highly desirable to optimize the waste packing plan. In this study, we developed an efficient scheme for packing waste component segments. The scheme consists of 1) preparing three-dimensional models of segments, 2) orienting each segment in such a way to minimize the bounding box volume, and 3) applying hybrid genetic algorithm to pack the segments in the disposal containers. When the packing solution converges in the algorithm, it comes up with the number of containers used and the placement of segments in each container. The scheme was applied to Kori-1 reactor pressure vessel. The required number of containers calculated by the developed scheme was 24 compared to 42 that was the estimation of the prior packing plan, resulting in disposal volume savings by more than 40%. The developed method is flexible for applications to various packing problems with waste segments from different cutting options and different sizes of containers.

포장방법이 동결계육의 이화학적 특성에 미치는 영향 (Effect of Packing Method on Physico-chemical Properties of Frozen Chicken)

  • 박구부;하정기;박범영;이상진;박용윤;박태선;신택순;이정일
    • 한국가금학회지
    • /
    • 제23권4호
    • /
    • pp.193-201
    • /
    • 1996
  • This experiment was carried out to find out the effect of packing methods on physico-chemical properties of breast and thigh meats in chicken, which was dried by air spray chilling method. The chicken carcass was cut into breast and thigh muscles, which were either vacuum packed or atmosphere packed, and stored at -2O˚C for 1, 4, 8, 12 and 16 wk after quick freezing at -45˚C for 35 min. The pH values of atmosphere-packed breast meat and vacuum-packed breast meat after one wk of storage were higher than those of atmosphere-packed thigh meat and vacuum-packed thigh meat(P< .05). The pH values increased as storage period extended, but no significant difference was detected between two packing method(vacuum vs. atmosphere). Total moisture contents of breast meats after one wk of storage were higher than those of thigh meats. The total moisture contents decreased slowly as storage period extended, but no significant difference was detected between two packing method(vacuum vs. atmosphere). The shear force value of thigh meat was higher than that of breast meat. The shear force values of both meats decreased as storage period extended, regardless of packing method. The water soluble protein extractability of thigh meats was higher than that of breast meat, and the water soluble protein extractability of all treatments decreased until 8 wk after storage, but increased gradually after 8 wk of storage period. The salt soluble protein extractability of breast meat was higher than that of thigh meat, and the salt soluble protein extractability of all treatments decreased as storage period extended. With regard to the packing method, the vacuum packing showed higher value than that of atmosphere packing method until 8 wk of storage. Total lipid contents of atmosphere- and vacuum-packed thigh meats at 1 wk of storage were higher than those of breast meats, and the total lipid contents of all of treatments decreased as storage period extended. However, no significant difference was detected between two packing methods. The fatty acid contents of breast and thigh meats were in order of o1eic(33,5~42.4), palmitic(19.7~30.8) and linoleic acid(10.8~17.4).

  • PDF

Multi-sized 혼합입자의 충전 분율 해석 및 예측을 위한 소프트웨어 개발 (Software Development for the Analysis and Prediction of Packing Density of Multi-sized Mixture Particles)

  • 오민;홍성욱
    • 공업화학
    • /
    • 제18권6호
    • /
    • pp.636-642
    • /
    • 2007
  • 다양한 크기를 가진 다성분 입자의 충전분율을 정확하게 예측할 수 있는 소프트웨어 프로그램을 개발하였다. 이를 위하여 다양한 크기의 염소산암모늄(Ammonium perchlorate, AP)과 알루미늄(Aluminum, Al) 입자와 혼합물에 대한 충전분율 측정실험을 수행하였다. 실험에 의해 얻어진 충전분율은 개발된 프로그램에 의해 예측된 값과 비교하였다. 크기가 다른 2종류 입자의 혼합 충전의 경우 상대오차가 0.25~13.13%, 3종류 입자의 혼합 충전의 경우 0.13~10.01%로 나타나 실험값과 잘 일치하였다. 목표 충전분율을 얻기 위한 각 구성입자의 질량분율 contour를 프로그램을 통하여 구할 수 있으며 이를 통하여 충전시스템을 최적화 할 수 있다.

혼합물실험계획법과 가진을 이용한 알루미나 파우더의 충진율 분석 (Analysis of Powder Packing for Alumina Using Design of Experiment with Mixture and Vibration)

  • 전상준;김영신;양대종
    • Composites Research
    • /
    • 제34권5호
    • /
    • pp.330-336
    • /
    • 2021
  • 알루미나 파우더는 산업용으로 널리 사용되는 소재 중 하나이지만 파우더 패킹 상태에 따라 제품의 강도가 변하는 문제점이 있다. 위 문제해결을 위하여 입자 패킹효율을 높이려는 많은 선행연구들이 수행되었지만, 기존 연구는 밀리미터 스케일의 입자의 충진 특성을 분석한 것이 대부분이므로 마이크로미터 스케일과 물리적 특성이 달라, 그 선행연구 결과를 토대로 마이크로미터 스케일에 적용하기 어렵다. 따라서 본 논문에서는 마이크로미터 스케일의 알루미나 파우더를 이용하여 충진률을 높이기 위하여 통계적방법을 이용하여 3단계 실험을 수행하였다. 먼저, 혼합물시험계획법을 이용하여 충진율이 높은 크기 조합 및 혼합 비율을 선정하였으며, 진동 실험장치에서 가진 주파수 변경에 따른 충진 높이 변화를 분석하여 적정 가진 주파수를 선정하였다. 마지막으로 앞서 언급한 실험 결과값을 토대로 알루미나 파우더 충진율 시험을 수행하였다. 그 결과, 최대 높이 변화량은 충진 크기조합 선정을 위해 수행한 최초의 실험 결과 최댓값보다 42% 향상된 것을 확인하였다.

$^{192}Ir$source를 이용할 자궁경부암 강내치료시 사용하는 packing의 효과에 대한 고찰 (Packing effects on the intracavitary radiation therapy of the utaine lervix cancer)

  • 조정근;이두현;시창근;최윤경;김태윤
    • 대한방사선치료학회지
    • /
    • 제16권1호
    • /
    • pp.73-77
    • /
    • 2004
  • 연구목적 : 자궁경부암 환자에게 시행되는 고선량을 강내조사의 경우 선원이 병소 근처에 위치함으로써 주변의 중요 장기에 최소의 선량이 투여될 수 있도록 치료계획이 가능하다. 하지만 해부학적 위치 상 방광과 직장이 병소와 근접하여, 선량을 최소화하고자 Packing을 시행한다. 본 연구에서는 실제 Packing의 효과를 알아보고자 모의치료시 packing을 시행한 것과 packing을 제거한 후의 사진을 얻어 ICRU(International Commission on Radiation Units) 38에 report 된 방광과 직장의 point dose를 비교하였다. 대상 및 방법 : Packing 전, 후의 방광과 직장의 선량변화를 알아보기 위하여 packing을 시행한 후 AP, LAT film을 촬영하고, 또한 동일한 상태에서 packing을 제거한 후 AP, LAT film을 촬영하여 확인하고자 하는 방광과 직장의 reference point를 각각 표시하고 이를 치료계획장치(PLATO BPS v13.7)에 입력한 후 ICRU 38 report에서 권고한대로 A point에 $100\%$ 선량을 prescription하는 치료계획을 시행하였다. 하지만 rectum의 경우 ICRU에서 제시한 point가 rectum point를 정확히 대변하지 못하는 이유로 maximum point를 찾아 비교하였다. 측정한 값들을 윌콕슨의 부호검정(SAS, 통계분석처리프로그램)을 통하여 packing 효과의 유의성에 대하여 분석하였다. 결 과 : packing을 시행하지 않은 상태에서의 방광과 직장 선량은 각각 $80.1{\pm}16.8(\%),\;82.7{\pm}16.3(\%)$이었고, packing을 시행한 경우 각각 $63.0{\pm}16.3(\%),\;67.6{\pm}16.3(\%)$로, 방광선량의 경우 평균선량이 $17.2{\pm}4.0(\%)$ 감소한 것으로 나타났으며, 직장선량의 경우 평균선량이 $15.1{\pm}9.9(\%)$ 감소한 것으로 나타났다. 이를 윌콕슨의 부호검정을 통하여 분석한 결과 방광과 직장 모두 검정통계량 값이 33으로 매우 크고 p 값이 0.001로서 매우 유의한 차이를 보이고 있다. 다시 말해서 $99\%$의 유의수준에서도 모평균(packing 여부에 따른 방광과 직장선량의 평균의 차이가 정량적 수치로 나타나 packing의 효과를 알 수 있다)의 차이가 뚜렷하다고 볼 수 있다. 결 론 : 자궁경부암에 있어 강내치료는 외부치료와 더불어 반드시 시행하여야 하는 치료로 인식되어 있다. 그 이유는 주변 주요장기인 방광과 직장을 피해 원발 병소에만 방사선량을 현저히 많은 양을 부여함으로써 높은 치료효과를 볼 수 있기 때문이다. 하지만 서른에서 언급하였듯이 해부학적으로 주요장기가 너무 인접하여 있기 때문에 이들을 인위적으로 분리시키지 않으면 안된다. 이러한 목적을 달성하기 위하여 packing을 사용하는데, 본 실험을 통하여 자궁경부암 강내치료시 사용하는 packing 방법의 효과가 매우 탁월함을 알 수 있었고 적극적인 packing을 통해 방사선치료시 가장 우려되는 주변의 정상조직의 부작용이 감소할 수 있도록 최선의 노력을 하여야 할 것으로 사료된다.

  • PDF

자궁경부암 강내조사 3차원 치료계획 시 Packing의 유용성 분석 (Packing effects on the intracavitary radiation Therapy 3-Dimension plan of the uterine cervix cancer)

  • 시창근;조정근;이두현;김선영;김태윤
    • 대한방사선치료학회지
    • /
    • 제17권1호
    • /
    • pp.1-8
    • /
    • 2005
  • 목적 : CT영상을 이용한 삼차원치료계획을 수립하여 방광과 직장의 점선량(point dose)과 체적선량(volume dose)에 대해 선량-체적 히스토그램(Dose-Volume Histogram)을 이용하여 자궁경부암의 강내치료에 사용하는 packing의 효과를 분석하였다. 대상 및 방법 : 자궁경부암 환자 7명을 대상으로 하여 동일조건하에서 packing을 시행했을 때와 제거했을 때 각각 CT촬영(Ultra Z, marconi, USA)을 하여 치료계획장치(Plato Brachy the Rapy V14.2.4)에서 방광과 직장의 reference point를 각각 표시하고 ICRU38에 따라 A point에 치료계획을 시행하였다. 하지만 rectum의 경우 ICRU에서 제시한 point가 rectum 선량을 대표할 수 있는 값으로 적절하지 않기 때문에 maximum point를 찾아 비교하였다. 그리고 rectum과 bladder의 $50\%,\;80\%,\;100\%$선량의 volume에 따른 체적선량을 알아보았다. 측정한 값들을 윌콕슨 부호검정(SAS 통계분석처리 프로그램)을 통하여 packing의 효과를 분석하였다. 결과 : Packing 제거 시에서의 방광과 직장의 reference point 선량은 $116.94{\pm}35.42\%,\;117.59{\pm}21.08\%$이었고, packing 시행한 경우에는 각각 $107.08{\pm}38.12\%,\;95.19{\pm}21.32\%$이었다. Packing시행 후에 방광은 $9.86\%$, 직장은 $22.4\%$감소하였다. Packing제거시의 방광과 직장 maximum point 선량은 $164.51{\pm}50.89\%,\;128.81{\pm}33.05\%$, packing시행한 경우 각각 $142.31{\pm}44.79,\;110.08{\pm}37.03\%$이었다. packing시행 후에 방광과직장 maximum point 선량이 $22.2\%,\;18.73\%$줄어들었다. packing제거시 방광과 직장선량의 $50\%,\;80\%,\;100\%$선량의 Volume은 방광이 $48.62{\pm}18.09\%,\;16.12{\pm}11.15\%,\;7.51{\pm}6.63\%$, 직장이 $23.41{\pm}14.44\%,\;6.27{\pm}4.28\%,\;2.79{\pm}2.27\%$이었고, packing시행한 경우의 $50\%,\;80\%,\;100\%$선량의 volume은 방광이 $40.33{\pm}16.72\%,\;11.63{\pm}8.72\%,\;4.87{\pm}4.75\%$, 직장이 $18.96{\pm}8.37\%,\;4.75{\pm}2.58\%,\;1.58{\pm}1.06\%$이었다. packing시행 후에 $50\%,\;80\%,\;100\%$선량의 volume 방광은 $8.29\%,\;4.49\%,\;2.64\%$, 직장은 $4.45\%,\;1.52\%,\;1.21\%$ 감소하였다. 결론 : 자궁경부암의 강내치료 시 사용하는 packing의 효과를 CT를 이용한 삼차원치료계획을 통하여 알아본 결과 ICRU 38에서 권고하는 방광과 직장의 기준 점선량(reference point dose)의 경우 P값이 각각 0.0781, 0.0781이었고, 최대점선량(maximum point dose)은 P값이 각각 0.0156, 0.0156으로써 유의한 차이를 보이는 것으로 나타났으나 $50\%,\;80\%,\;100\%$를 초과하는 체적선량(volume dose)의 경우 p갈이 0.15이상으로써 유의하지 않은 것으로 나타났다. 다시 말해서 packing의 효과가 점선량의 경우 차이가 있는 것으로 보이지만 실제 체적선량은 별 차이가 없는 것으로 분석되었다. 그 이유를 살펴보니 방광과 직장의 용적(volume)은 넓은데 비해 packing을 하는 부분은 일부분에 지나지 않아서 큰 선량감소의 효과가 없었던 것으로 보인다. 하지만 방사선의 강도는 거리 역 제곱에 비례하므로 거리가 멀면 멀수록 방사선의 강도는 약해진다. 따라서 packing을 실시하여 방광과 직장의 장해를 최소화하는데 노력을 기울여야 할 것이다.

  • PDF

고전단점도 측정에 의한 도공액의 패킹 특성 연구 (Studies on the Packing Characteristics of Coating Colors Based on the Rheological Properties at High Shear Rates)

  • 이학래;성용주
    • 펄프종이기술
    • /
    • 제29권2호
    • /
    • pp.7-15
    • /
    • 1997
  • High shear viscosity at several solids levels was measured for a number of pigment slurries and coating colors containing either anionic or amphoteric latex and analyzed according to Mooney and Eiler equations. Maximum packing fraction and intrinsic viscosity were obtained and compared. Eiler equation provides more credible information than Mooney equation on particle packing and intrinsic viscosity. The packing fraction obtained from Eiler equation was slightly greater than that obtained from static FCC measurement indicating the influence of pigment movement under the dynamic condition. Amphoteric latex caused 4-5% increase of maximum packing fraction of a coating color when its pH is lowered from 7 to 6, while anionic latex did not show any significant change in packing characteristics.

  • PDF

Effect of Packing Condition of Polyethylene film on Storage of a Major Herbal Medicine Material, Anemarrhena Rhizome

  • Choi, Seong-Kyu
    • Plant Resources
    • /
    • 제6권1호
    • /
    • pp.53-56
    • /
    • 2003
  • To develop optimal storage method of root of Anemarrhena Rhizome, which has been grown as major cultural herbal medicine material, root of Anemarrhena Rhizome was stored for 10 months with different packing materials and sealing methods. The loss in dry weight as influenced by packing materials and sealing methods was the lowest at vacuum packing and followed by complete sealing methods with transparent polyethylene film. The rot ratio of root during the storage period was not significantly different among packing materials but was significantly different among sealing conditions. Conclusively vacuum packing and complete sealing with polyethylene film appears to be optimal for storage of Anemarrhena Rhizome.

  • PDF

초저온 게이트 밸브용 패킹의 수치해석 연구 (A Numerical Analysis Study on the Characteristics for Packing Design of Cryogenic Gate Valve)

  • 김시범;전락원;황일주;이재훈;강대기
    • 한국기계가공학회지
    • /
    • 제11권3호
    • /
    • pp.160-165
    • /
    • 2012
  • The packing, among the components comprising the gate valve, is used to sustain the air-tightness and the study on change of shape or pattern has been carried out to maximize the functions, but the study on changing the location or the size of the packing in a bid to prevent the freezing has rarely been implemented. Thus, This study is intended to evaluate the thermal strain of packing by heat transfer from territory of extremely low temperature as well as the temperature distribution to the upper part of the packing using numerical analysis method.