• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권6호
• /
• pp.1586-1605
• /
• 2012

With the prevalence of multimedia applications and the potential commercial usage of Mobile Ad hoc Networks (MANETs) in group communications, Quality of Service (QoS) support became a key requirement. Recently, some researchers studied QoS multicast issues in MANETs. Most of the existing QoS multicast routing protocols are designed with flat topology and small networks in mind. In this paper, we investigate the scalability problem of these routing protocols. In particular, a Position-Based QoS Multicast Routing Protocol (PBQMRP) has been developed. PBQMRP builds a source multicast tree guided by the geographic information of the mobile nodes, which helps in achieving more efficient multicast delivery. This protocol depends on the location information of the multicast members which is obtained using a location service algorithm. A virtual backbone structure has been proposed to perform this location service with minimum overhead and this structure is utilized to provide efficient packet transmissions in a dynamic mobile Ad hoc network environment. The performance of PBQMRP is evaluated by performing both quantitative analysis and extensive simulations. The results show that the used virtual clustering is very useful in improving scalability and outperforms other clustering schemes. Compared to On-Demand Multicast Routing Protocol (ODMRP), PBQMRP achieves competing packet delivery ratio and significantly lower control overhead.

• 한국인터넷방송통신학회논문지
• /
• 제9권3호
• /
• pp.9-17
• /
• 2009

A Mobile Ad hoc network(MANET) is a network consisting of a set of wireless mobile nodes, which communicate with each other without centralized control or established infrastructure. In this paper, to obtain a better understanding of AODV(Ad hoc On-Demand Distance Vector Routing Protocol)and OLSR(Optimized Link State Routing Protocol) routing protocols, different performances are simulated and analyzed using OPNET modeler 14.5 with the various performance metrics, such as packet delivery ratio, end-to-end delay and routing overhead. As a conclusion, in static analysis, the routing overhead of OLSR is affected by the number of nodes, but not data traffic. In AODV case, it is affected by both data traffic and number of nodes. In mobility analysis, routing overhead is not greatly affected by mobility speed in AODV and OLSR, and the PDR(Packet Delivery Ration) of OLSR is decreased as the node speed increased, while AODV is not changed. AS to delay, AODV is always higher than OLSR in both static and nobility cases.

• Journal of Communications and Networks
• /
• 제16권4호
• /
• pp.378-384
• /
• 2014

Replication routing can greatly improve the data delivery performance by enabling multiple replicas of the same packet to be transmitted towards its destination simultaneously. It has been studied extensively recently and is now a widely accepted routing paradigm in delay tolerant networks (DTNs). However, in this field, the issue of how to maximize the utilization efficiency of limited replication quota in a resource-saving manner and therefore making replication routing to be more efficient in networks with limited resources has not received enough attention. In this paper, we propose a DTN routing protocol with back-pressure based replica distribution. Our protocol models the replica distribution problem from a resource allocation perspective and it utilizes the idea of back-pressure algorithm, which can be used for providing efficient network resource allocation for replication quota assignment among encountered nodes. Simulation results demonstrate that the proposed protocol significantly outperforms existing replication routing protocols in terms of packet delay and delivery ratio.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권9호
• /
• pp.3094-3109
• /
• 2014

This paper proposes a load balanced reliable routing protocol called LBR (Load Balanced Reliable routing) in wireless networks. The LBR protocol transmits messages through a reliable path considering the balancing of the traffic load. Recently, the authors have proposed a multipath-based reliable routing protocol called MRFR, which is an appealing protocol for fault tolerant reliable data transmission. However, However, MRFR has no concern with the problem of load balancing, which results in increasing congestion and consuming high energy at some network nodes. As a result, the problem affects negatively the performance of the network. Taking account of load balancing as a route selection criteria can avoid routing through the congested nodes and allows to find better routes. In this paper, we extend MRFR by considering load balancing in the route discovery process of reliable communication. The simulation results showed that the proposed protocol outperforms AODV in terms of end-to-end delay, packet delivery radio, and average jitter. Compared to MRFR, the LBR protocol has the same packet delivery ratio, and obtains a better efficiency of load balancing.

• 한국멀티미디어학회논문지
• /
• 제22권6호
• /
• pp.676-683
• /
• 2019

Wireless Sensor Networks (WSNs) consist of multiple tiny and power constrained sensors which use radio frequencies to carry out sensing in a designated sensor area. To effectively design and implement reliable WSN, it is critical to consider models, protocols, and algorithms that can optimize energy consumption of all the sensor nodes with optimal amount of packet delivery. It has been observed that deploying a single sink node comes with numerous challenges especially in a situation with high node density and congestion. Sensor nodes close to a single sink node receive more transmission traffic load compared to other sensors, thus causing quick depletion of energy which finally leads to an energy hole and sink hole problems. In this paper, we proposed the use of multiple energy efficient sink nodes with brute force technique under optimized parameters to improve on the number of packets delivered within a given time. Simulation results not only depict that, deploying N sink nodes in a sensor area has a maximum limit to offer a justifiable improvement in terms of packet delivery ratio but also offers a reduction in End to End delay and reliability in case of failure of a single sink node, and an improvement in the network lifetime rather than deploying a single static sink node.

• ETRI Journal
• /
• 제34권5호
• /
• pp.775-778
• /
• 2012

We propose integrating random network coding with the Enhanced On-Demand Multicast Routing Protocol (E-ODMRP). With the Network Coded E-ODMRP (NCE-ODMRP), we present a framework that enables a seamless integration of random linear network coding with conventional ad hoc multicast protocols for enhanced reliability. Simulation results show that the NCE-ODMRP achieves a nearly perfect packet delivery ratio while keeping the route maintenance overhead low to a degree similar to that of the E-ODMRP.

• International journal of advanced smart convergence
• /
• 제3권2호
• /
• pp.18-21
• /
• 2014

A control application requirements currently used is very low, such as packet loss rate, minimum delay on sensor networks with quality of service (QoS) requirements some packet delivery guarantee. This paper is the sampling period at the end of the actuator and sensor data transfer related to the Miss ratio for each source sensor node, use the controller and the internal ANFIS. The proposed scheme has the advantages of simplicity, scalability, and General. Simulation results of the proposed scheme can provide QoS support in WSANs.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2007년도 춘계학술발표대회
• /
• pp.1195-1198
• /
• 2007

In this paper we study the problem of real time support in wireless sensor networks and propose a Real time Geographic Routing Protocol (ReGeo) which routes a packet towards the destination based on a compromise between distance and queue count to reduce traffic concentration wherever it has been determined to be too high and uses Gradient Table to store the route satisfying the delay constraints. We describe our prototype implementation of ReGeo Routing in TOSSIM - a TinyOS mote simulator. The simulation results show that the proposed routing protocol not only increases the packet delivery ratio but also keeps overall End to End Delay under a bounded value.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권12호
• /
• pp.4389-4410
• /
• 2014

Network coding is a promising technology that increases system throughput by reducing the number of packet transmissions from the source node to the destination node in a saturated traffic scenario. Nevertheless, some packets can suffer from end-to-end delay, because of a queuing delay in an intermediate node waiting for other packets to be encoded with exclusive or (XOR). In this paper, we analyze the delay according to packet arrival rate and propose two network coding schemes, iXOR (Intelligent XOR) and oXOR (Optimal XOR) with Markov Decision Process (MDP). They reduce the average delay, even under an unsaturated traffic load, through the Holding-${\chi}$ strategy. In particular, we are interested in the unsaturated network scenario. The unsaturated network is more practical because, in a real wireless network, nodes do not always have packets waiting to be sent. Through analysis and extensive simulations, we show that iXOR and oXOR are better than the Distributed Coordination Function (DCF) without XOR (the general forwarding scheme) and XOR with DCF with respect to average delay as well as delivery ratio.

• 한국통신학회논문지
• /
• 제35권9A호
• /
• pp.882-888
• /
• 2010

Vehicular Ad-Hoc Networks (VANETs) using inter-vehicle communication can potentially enhance traffic safety and facilitate many vehicular applications. Therefore, this paper proposes an inter-vehicle routing protocol called Junction-Assisted Routing (JAR) that uses fixed junction nodes to create the routing paths for VANETs in city environments. JAR is a proactive routing protocol that uses the Expected Transmission Count (ETC) for the road segment between two neighbor junctions as the routing paths between junction nodes. Simulation results showed that the proposed JAR protocol could outperform existing routing protocols in terms of the packet delivery ratio and average packet delay.