• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.2 s.110
• /
• pp.70-77
• /
• 2005

For the purpose of developing liner board for water resistant corrugated board in the cold chain system, several types of base paper for corrugated board were purchased from the market and 6 different boards were produced in the mill by applying the chemicals, chosen in the previous studies, on the base paper. Then water-moisture resistance and physical properties of the boards were compared each other. The liner board which is dried at high temperature with pressure by Condebelt (CK paper) showed a superior performance in strength over common liner boards. Strength of the board increased by surface chemical treatment up to $60\%$ of compressive strength and $30\%$ of burst strength. Starch insolubilization with Ammonium Zirconium Carbonate and surface coating with a surface sizing agent and a moisture resistant chemical on CK paper showed the best result. Therefore this method was recommended to produce the outer liner board for water resistant corrugated board.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.1
• /
• pp.65-73
• /
• 2011

The fibrous raw materials in packaging-grade paper production in Korea were mainly obtained from waste paper. The use of recycled paper has both positive and negative impacts in papermaking process. The primary positive impacts are the environmental protection and manufacturing cost reduction, and the negative impacts are the quality reduction in paper quality and the accumulation of heavy metals and other pollutants in wet- and dry-end process. This study was carried out to consider the optimum acid decomposition system with the highest recovery rate for the analysis of heavy metals in packaging-grade paper. The open digestion system using Kjeldahl apparatus and the closed digestion system using microwave oven for decomposing the organic materials in paper were compared. In both open and closed digestion method, the combination of nitric acid, hydrochloric acid and hydrogen peroxide showed higher recovery rate than using only nitric acid alone because the presence of Cl- ions in hydrochloric acid stabilizes ligand formation with metal ions. KOCC was observed to have the highest heavy metal content among the recycled paper samples. The heavy metal contents decomposed with the closed digestion system were relatively higher than with open digestion system.

• The monthly packaging world
• /
• s.169
• /
• pp.121-123
• /
• 2007

최근 CJ가 출시한 프레시안 양송이 스프와, 프레시안 브로컬리 치즈스프는 컵라면 형태로, 수프를 부어 전자레인지에 돌리기만 하면 완성되는 즉석 수프이다. 이 제품은 기존 제품을 새롭게 컵라면 형태로 출시해 편리성을 더욱 높였을 뿐만 아니라 용기 안에 수프를 넣고 그대로 전자레인지에 넣고 돌리면 먹을 수 있다. 특히 용기 안에 숟가락이 들어 있어 먹기 편리하다. 본 고에서는 이 용기에 적용된 매직탑 시스템을 살펴보도록 한다.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.14 no.2
• /
• pp.57-63
• /
• 2008

The effects of airtight containers and zipper bags on the freshness extension of pine nuts (Pinus koraiensis) were studied at 4 and $25^{\circ}C$. Changes in total microbial growth, 2-thiobarbituric acid(TBA), color, and sensory quality were evaluated during storage. Total bacterial counts of the samples continuously increased over 28 days for airtight containers and 56 days for zipper bags, and then decreased at 70 days because the lack of air could affect the inhibition of the aerobic microbial growth. However no significant differences were observed between airtight containers and zipper bags. TBA values continuously increased with storage time, but there were no significant differences between the airtight containers and zipper bags during storage. Color changes and sensory evaluation analyses showed that the data revealed similar results for both packaging systems over the storage time. Therefore, it has been concluded that airtight containers and zipper bags could be used as a good packaging system to extend the shelf life of pine nuts by controlling the microbial growth, but the packaging systems of the airtight containers and the zipper bags was not significantly affect the quality parameters for 2-thiobarbituric acid(TBA), color, and sensory quality.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.4
• /
• pp.495-499
• /
• 2024

This article summarizes the importance, definition, key strategies and future directions of sustainable packaging design.In modern society, sustainable packaging design is not only concerned with environmental protection and resource conservation, but also involves economic, social and cultural sustainable development.This paper explores strategies to reduce environmental burden and promote ecological balance by using environmentally friendly materials, optimizing packaging design, improving packaging recyclability and reuse. In addition, the article emphasizes the importance of design innovation, such as adopting a simplified design concept and modular system, as well as increasing the versatility of packaging.It also explores the application of life cycle assessment in packaging design to ensure that every step from design to disposal minimizes environmental impact. Finally, despite the environmental and social benefits that sustainable packaging design brings, it still faces technical, economic and regulatory challenges in practice.Future design will require interdisciplinary collaboration, integration of advanced technologies, consumer education and engagement, and enhanced policy and standard-setting to promote widespread adoption and practice of sustainable packaging.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.5
• /
• pp.67-73
• /
• 2010

Paper packaging materials are essential in protection and transportation of commercial or industrial products. Raw materials for packaging paper production are mainly obtained from various grades of waste paper. For this reason, the recycled fibers from waste paper would probably have possibility of containing heavy metals. This study was focused on the development of optimum pre-treatment method for the quantitative analysis of mercury. The optimum pre-treatment for open digestion system were obtained at the treatment conditions of acid combination with $HNO_3/HCl/H_2O_2$ or $HNO_3/H_2SO_4$ at $80^{\circ}C$. The optimum pre-treatment conditions in closed digestion system were determinated by the acid combination with $HNO_3/HCl/H_2O_2/HF$ in microwave at 320 W for 20 min. The recovery rate in open digestion system was 85~94% and in closed digestion system was indicated as about 100%. Therefore, the closed system is superior than the open system in pre-treatment method for the quantitative analysis of mercury, and the detected mercury contents in the sample of KOCC, AOCC and kraft sack paper were measured below 1 ppm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.3
• /
• pp.463-469
• /
• 2009

We performed the experimental study on the control of suspended dust in a cement packaging process for various ventilation systems. To effectively remove the dust generated in the cement packaging process, three different kinds of ventilation system, such as local exhaust ventilation, electrostatic scrubber, and local air supply system, were adopted. Dust concentrations in the packaging process were measured with the variation of the airflow rate of the ventilation systems and then their ventilation performance were evaluated. From the results, we knew that the ventilation performance was the best when the local exhaust ventilation and the electrostatic scrubber were simultaneously operated in the packaging process. In the electrostatic scrubber system, the effect of the airflow rate on the indoor dust removal efficiency was negligible so hat he system ust be operated at $2,700m^3/h$ for saving power consumption.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.19 no.1
• /
• pp.7-10
• /
• 2013

A packaging system integrated in primary and secondary packages to deliver consumers fresh peach in the produce supply chain was designed and its effectiveness on quality preservation was tested. The master packaging system was designed to contain 6 individual polypropylene film (PP, $30{\mu}m$ thickness) packages of 300 g peach fruit inside $35{\mu}m$ thick low density polyethylene (LDPE) bag located in a corrugated paperboard box. As a variable to attain the desired package atmosphere around the fruit during cold storage and subsequent retail display at higher temperature, different numbers (1, 3 and 7) of microperforations in $59{\mu}m$ diameter were tested on the individual PP packages. As control treatment, six fruits were placed without wrapping in a corrugated paperboard box. During the storage at $5^{\circ}C$, the control and individual packages were periodically separated from the box or master package, moved to the simulated retail shelf conditions of $20^{\circ}C$ and then stored for 3 more days with package atmosphere and fruit quality being measured. The package with 7 microperforations was the best in the ability to attain beneficial MA of 6~10% $O_2$ and 11~19% $CO_2$ around the fruit during the chilled storage at $5^{\circ}C$ and simulated retail display at $20^{\circ}C$. Packages with smaller number of microperforations resulted in anaerobic atmosphere at the low temperature storage and/or the subsequent high temperature display. Compared to control, all the treatments with master packaging system gave better retention of fruit firmness with significantly less weight loss.

• The Journal of Korean Society of Virology
• /
• v.26 no.2
• /
• pp.141-150
• /
• 1996

본 연구에서는 $CD4^+$ T 세포를 일회성으로 감염시킬 수 있고 $CD4^+$ T 세포에 HIV-1 envelope 유전자를 전달할 수 있는 바이러스 입자를 생산하는 HIV-1 complementation system을 개발하였고 이 system을 이용하여 $CD4^+$ T 세포에 선택적으로 HIV-1 envelope 당단백질을 발현시켰다. 이 system은 Gag/Gag-Pol expressor와 Env expressor로 구성되어있다. Gag/Gag-Pol expressor는 바이러스 입자 생산에 필요한 구조단백질과 기능단백질을 발현시키지만 packaging signal이 결핍되어 바이러스 입자로 유전자가 들어가지 못하도록 제조되었다. Env expressor는 Tat, Rev와 envelope 당단백질을 발현시키고 packaging signal을 갖고 있어 바이러스 입자로 envelope 유전자가 들어가도록 제조되었다. Gag/Gag-Pol expressor로부터 Gag와 Gag-Pol의 발현은 Rev 단백질을 요구하였고 Env expressor로부터 Rev 단백질 이 제공될 때 Gag와 Gag-Pol 단백질은 효율적으로 발현되었다. Gag/Gag-Pol과 Env expressor로 cotransfection된 COS-1 세포에서 $CD4^+$ T 세포를 일회성으로 감염시킬 수 있는 바이러스 입자가 생산되었다. 생산된 바이러스 입자는 $CD4^+$ T 세포에 HIV-1 envelope 유전자를 전달하여 envelope 당단백질을 발현시켰고 복제 가능한 자손 바이러스의 생성을 유도하지 못하였다. 본 연구에서 개발된 방법은 $CD4^+$ T 세포에서 envelope 당단백질의 기능을 분석하고 관심 있는 유전자를 $CD4^+$ T 세포에 전달하는 바이러스 입자의 생산에 이용할 수 있다.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2006.10a
• /
• pp.67-73
• /
• 2006

A system in package (SiP) generally contains a variety of systems such as analog, digital, optical and micro-electro-mechanical systems, integrated in a system-level package connected through a substrate. However, there are many electrical and mechanical reliability issues including the reliability issue for embedded structures. A mismatch of thermal coefficients of expansion among packaging materials and devices can lead to warping or delamination in the package. In this study, the effect of material properties of underfill, such as Young's modulus and CTE, are investigated through FEM simulation. Experimental investigation on the warpage of the package is also carried out to verify the simulation results. The results show that the reliability of the system in package is closely related to the material properties of underfill. The results of this study provide a good guidance for the material selection when designing the system in package.