• 한국포장학회지
• /
• 제11권1호
• /
• pp.47-52
• /
• 2005

The wasted plastic PC/ABS retainer, polyurethane foam (PUF) and vinyl (PVC) skin. In order to investigate the recycling process, the multi-layered instrument panel Each of materials separated was shredded and crushed to create many small particles respectively. The separation of the foam and skin and retainer of zigzagged air blower. Pilot tests performed at the equipment yielded 98.8% by weight of the available PVC and 99.3% by weight of the available PC/ABS respectively. Secondly, the thermal stabilizer and the compatabilizer have been used to improve the physical propertied of recycled materials.. The properties of recycled PVC materials resulted in about 50% compared to that of virgin materials after treatment by Pb-St thermal stabilizer. In addition, the properties of recycled PC/ABS materials was also obtained about 80% compared to that of virgn materials after treatment by PMMA compatabilizer.

• 보존과학회지
• /
• 제37권1호
• /
• pp.55-62
• /
• 2021

This study investigated mechanical property changes by measuring compression factors, resilience, and compressive strength according to packaging pattern and filling rate to identify the applicability of cultural heritage packaging using thermoplastic polyurethane elastomers (TPU). Research results indicate that the cross-shaped 3D pattern showed the best resilience when the internal filling rate was 20%, while the octet pattern was the best when the filling rate was either 40 and 60%. The octet pattern had the best mechanical properties and stability with resistance capacities of 20.79 kgf/cm², 40.40 kgf/cm², and 82.23 kgf/cm² at 38%, 39%, and 40% recovery speeds, respectively, depending on the internal filling rate (20, 40, 60%). Based on these results, basic data on the applicability, stability, and reliability of 3D cultural heritage packaging materials using TPU materials were obtained.

• 한국포장학회지
• /
• 제27권2호
• /
• pp.85-90
• /
• 2021

The gamma irradiation was on to Poly(butylene sebacate-co-terephthalate) (PBSeT), Poly(butylene adipate-co-terephthalate) (PBAT), Poly(lactic acid) (PLA) and casting polypropylene (CPP) at dose levels from 0 to 50 kGy. The properties of gamma irradiated samples were analyzed using DSC, TGA, UTM and FT-IR spectra. The mechanical and thermal properties of PBSeT and PBAT after gamma irradiation were less affected than CPP. The tensile strength and elongation of PBSeT was not affected by gamma irradiation, while these of PBAT, PLA and CPP were significantly decreased at 50 kGy gamma-ray dose. The thermal stability of PBSeT, PBAT, PLA and CPP showed a similar tendency to tensile strength. The glass transition temperature(T_g) and melting temperature(T_m) of PBSeT and PBAT were not altered by increasing gamma-ray dose, while these of PLA and CPP decreased. The chemical composition of all samples was not modified by gamma irradiation, and it was confirmed by FT-IR spectra. Based on mechanical and thermal stability studies of gamma irradiation on bioplastics, tested biodegradable packaging materials showed a potential to be used in sterilization process up to 35 kGy.

• 한국포장학회:학술대회논문집
• /
• 한국포장학회 2007년도 국제 세미나 심포지움
• /
• pp.39-48
• /
• 2007

Safety of packaging foods has increasingly been a significant global issue in recent years. This paper aims to present the broad information and perspectives on food packaging safety in Thailand. This paper compiles the use of different packaging materials, their safety characteristics, and the regulations in Thailand in accordance with the world regulations. In addition, it covers the opinion of various parties related to food packaging in Thailand. Some scientific based results coupled with the interviewing and questionnaire data from the previous and ongoing researches are discussed here. This paper summarizes the food packaging safety in Thailand today and proposed the trends tomorrow along with the future world requirements.

• Journal of Information Display
• /
• 제2권4호
• /
• pp.34-38
• /
• 2001

We suggested new PDP packaging technology using the direct joint method, which does not need an exhausting hole and tube. The advantages of this method are simple process, short process time and time panel package. To packaging, we drew the seal line of glass frit by dispenser followed by forming the lump, which provide pumping-out path during the packaging process. And, we have performed a pretreatment of glass frit to reduce the out-gases. After which, both front and rear glass plates were aligned and loaded into vacuum packaging chamber. The 4-inch monochrome AC-PDP was successfully packaged and fully emitted with brightness of 1000 $cd/m^2$. Also, glass frit properties for pretreatment condition was investigated by AES and SEM analyses.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권1호
• /
• pp.194-200
• /
• 2021

This study proposes a plan to construct an integrated platform that reduces manufacturing costs and efficiently produce by integrating the systems of main producers, production subcontractors, and raw material subcontractors for the production of food packaging containers. The production plan of food packaging containers and raw materials is established in real time between the main producers, production subcontractors, and raw material subcontractors in consideration of the demand characteristics of each product. It establishes basic information that all processes from the production planning stage to the forwarding stage of the product are linked to each other. The progress of each producer of interlinked processes is shared in real-time to improve productivity and quality of food packaging containers and raw materials and reduce manufacturing costs. By monitoring the system of the main producer and the production subcontractor in real time, the production of food packaging containers is performed in a timely manner, thereby improving productivity. The application of the plan-do-check-action (PDCA) process, which includes planning, execution, evaluation and improvement in the production operation processes of the main producer, production subcontractor and raw material subcontractor, enables improved production compliance rate. The contents of the main producers, production subcontractors, and raw material subcontractors are managed in real time, then a converged production management system is established through the platform proposed in this study to ensure timely supply and demand of raw materials without delay in ordering.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 1999년도 추계 기술심포지움 논문집
• /
• pp.99-102
• /
• 1999

• 한국산업융합학회 논문집
• /
• 제23권5호
• /
• pp.843-852
• /
• 2020

Among the many packaging materials used in cushion packaging, there is a lack of optimum design for packaging trays and cushion pads used in pear packaging for export and domestic distribution. It causes over-packaging due to excessive material input, and can be solved by applying various parameters needed to optimize the design of the packaging tray and cushion pad considering the packaging material and the number of pears in the box. In the case of a cushion pad for pears, the economic efficiency of material and thickness should be considered. Therefore, it is possible to design a packaging tray and cushion pad depending on eco-friendly packaging materials (PLA, PET) used by applying appropriate design parameters. The static characteristics of the materials used for the packaging of pears were analyzed using FEA (finite element analysis) simulation technique to derive the optimal design parameters. In this study, we analyzed the contact stress and deformation of PET, PLA tray (0.1, 0.5 1.0, 1.5 and 2 mm) and PET foam (2.0, 3 .0 and 4.0 mm) with pears to derive appropriate cushion packaging design factors. The contact stress between the pear and PET foam pad placed on PLA, PET trays were simulated by FEA considering the bioyield strength (192.54±28 kPa) of the pears and safety factor (5) of packaging design, which is the criterion of damage to the pears. For the combination of PET tray and PET foam buffer pad, the thickness of the PET foam is at least 3 mm, the thickness of the PET foam is at least 1.0 mm, the thickness of the foam is at least 2 mm, and if the thickness of the PET tray is at least 1.5 mm, the thickness of the foam is at least 1 mm, suitable for the packaging design. In addition, for the combination of PLA tray and PET foam pad, the thickness of the PET foam was not less than 2 mm if the thickness of the PLA tray was 0.5 mm, and 1 mm or more if the thickness of the PLA tray was not less than 1.0 mm, the thickness of the PET foam was suitable for the packaging design.

• 한국포장학회지
• /
• 제17권2호
• /
• pp.29-31
• /
• 2011

Hazards associated with use of wood packaging in international trade were addressed with regulations enforced. Measures to avoid spreading of pest in the trade were discussed in terms of current status and future availability.

• 마이크로전자및패키징학회지
• /
• 제30권1호
• /
• pp.42-48
• /
• 2023

최근 모바일, IoT, 차량 등의 많은 산업군에서 발생하는 다양한 종류의 신호 및 전력 요구가 증가함에 따라 그에 맞는 성능 향상과 소형화에 대한 요구가 높아지고 있는 상황이다. 이러한 추세에 따라 고성능의 칩이 필요해지고 이러한 칩을 패키징 할 수 있는 고급 패키지 기술의 개발 필요성이 높아지고 있는 상황이다. 이러한 상황에서 FOWLP 공정 기술은 이에 맞는 적합한 기술이며 이 공정에서의 부족한 점을 개선하기 위하여 사용되고 연구되고 있는 플라즈마 응용 기술들에 대하여 본 논문에서 알아보았으며 크게 4가지 부분으로 나누어 각 부분에서 사용되는 플라즈마 응용 기술들에 대한 소개와 연구 사례를 설명한다.