• 제목/요약/키워드: packaging film

검색결과 994건 처리시간 0.027초

콩나물에서 발견된 유전자 변형 도입 유전자의 비의도적 혼입 조사 (Detection of Genetically Modified Genes from Soybean Sprout Products)

  • 윤성철
    • 한국작물학회지
    • /
    • 제49권3호
    • /
    • pp.227-231
    • /
    • 2004
  • 최근 급격히 증가되는 유전자 변형 식품의 안정성 논란과 관련하여 콩나물 및 콩나물 원료에 사용되는 국산 및 수입산 콩에 대한 유전자 변형 유전자의 정량 검사를 실시하고, 미량이나마 함유된 변형 유전자의 도입과정에 관한 연구를 실시하여 다음과 같은 결과를 얻을 수 있었다. 1.콩나물의 유전자 변형 농산물 검사는 2000년과 2001년에 원료콩 96건, 완제품 123건 등 총 219차례 실시하였다. 2. 원료콩에서는 단 한 건의 양성반응도 없었던 반면, 완제품에서는 2000년에 3건, 2001년에 8건에서 0.01-0.17%의 함량으로 CP4EPSPS 또는 35S promoter도입유전자가 검출되었으며 이는 법적 기준치인 3%보다 훨씬 낮은 비의도적 혼입이었다. 3. 외래유전자가 검출된 11건의 완제품은 국산콩으로 만든 7개 제품과 중국산 수입콩으로 만든 4개 제품이었다. 4. 이들 도입 유전자의 원료콩 및 제조과정 중 유입 경로를 확인하기 위하여 다양한 시료를 검사하였다. 샘플은 양성반응제품 원료콩 전수검사, 원료콩 표면, 저장고 바닥 및 정선기 주변, 그리고 콩나물 제품 포장 필름 표면 및 포장지 원료로 사용되는 옥수수 타분의 유전자 변형 여부를 정량검사하였다. 이들 중 두 개의 옥수수 타분 시료에서만 0.1%의 35S promoter 유전자가 검출되었다. 5. 콩나물 포장 공정 중 옥수수 타분을 사용하는 포장지에서 유래되는 변형 유전자 오염을 제시하였다. 향후, 콩나물 변형 유전자 검사시 용수, 필름 표면 등 제품주변에 존재하는 도입 유전자의 정량분석 방법 구축과 원료콩 샘플 방법 및 샘플량의 표준화가 시급히 필요하다.

솔비톨 혼합물과 글리세린 가소제에 의한 분리 대두단백질 필름의 특성연구 (Characteristics of Soy Protein Isolate Films Plasticized by Mixtures of Crystalline and Aqueous Sorbitol or Glycerin)

  • 김기명;;최원석;조성환;최성길
    • 한국식품저장유통학회지
    • /
    • 제13권3호
    • /
    • pp.285-291
    • /
    • 2006
  • 가소제로서 솔비톨 혼합물의 첨가가 분리대두단백 필름의 수분흡습특성, 수분투과도, 색, 인장강도 및 신장률, 그리고 용해 특성에 미치는 영향을 조사하였다. 솔비톨 혼합물은 액상형과 결정형의 상태로 다양한 비율로 혼합하여 첨가하였고, 가소제로 글리세린을 첨가한 대조구 필름의 물리적 특성과 비교하였다. 솔비톨이 첨가된 필름은 대조구 필름에 비해 높은 인장강도를 갖는 반면 낮은 수분투과도 및 신장률을 보였다. 한편 솔비톨 첨가 형태에 따른 영향은 필름 신장률에는 유의적 차이는 보였으나 기타 수분투과도, 색, 인장강도 등의 필름특성에는 커다란 차이는 보이지 않았다. 솔비톨 첨가된 필름은 높은 수분차단 효과 및 필름강도를 갖는 대신 높은 용해성을 보여, 상업적 활용성을 증진시키기 위해서는 이를 극복하는 연구가 필요할 것으로 사료된다.

개환 복분해 중합을 통한 가교형 폴리이미드 박막의 잔류응력 거동 및 특성 분석 (Residual Stress Behavior and Characterization of Polyimide Crosslinked Networks via Ring-opening Metathesis Polymerization)

  • 남기호;서종철;장원봉;한학수
    • 폴리머
    • /
    • 제38권6호
    • /
    • pp.752-759
    • /
    • 2014
  • 본 연구에서는 미세 전자 소자용 절연박막 및 차세대 플렉시블 디스플레이 기판으로서 사용이 기대되는 폴리이미드(PI)에 개환 복분해 중합(ring-opening metathesis polymerization)이 가능한 환형 말단 캡핑제(end-capping agent)인 cis-1,2,3,6-tetrahydrophthalic anhydride(CDBA)로 사슬 말단에 가교 반응이 된 가교형 폴리이미드를 합성하였다. 말단 캡핑제의 조성비에 따른 가교형 폴리이미드 박막의 잔류응력 거동은 thin film stress analyzer(TFSA)를 이용한 wafer bending mothod로 온도에 따라 연속적인 거동을 in-situ로 측정하였다. 열특성은 시차 주사 열량계(DSC), 열기계 분석기(TMA) 및 열 중량 분석기(TGA)를 이용하여 측정하였고, 광학 특성은 자외선/가시광선 분광광도계(UV-vis)와 색차계(spectrophotometer)를 이용하였으며, 네트워크 구조의 모폴로지(morphology) 변화를 통해 해석하였다. 말단 캡핑제의 조성비가 증가함에 따라 잔류응력은 27.9에서 -1.3 MPa로 초저응력 및 향상된 열 특성을 나타내었으나, 광학 특성은 감소됨을 보였다. 가교형 폴리이미드 박막의 우수한 특성 발현은 고집적도 다층 구조의 안정성 및 신뢰도가 요구되는 분야의 응용성이 확대될 것으로 기대된다.

상품성 제고를 위한 고구마 수확 후 관리 및 출하기술 (Postharvest Handling and Marketing Management for Making High Salability of Sweetpotatoes)

  • Jeong, Byeong-Choon
    • 한국식품저장유통학회:학술대회논문집
    • /
    • 한국식품저장유통학회 2001년도 임시총회 및 제18차 학술발표회 발표논문초록집
    • /
    • pp.51-64
    • /
    • 2001
  • The qualities including taste of sweetpotato stored during the winter which can display in the spring market in Korea are affected by availability of storage for the roots. In order to make high storage availability of sweetpotato, the postharvest handlings should be done thoroughly from the moment of harvest until shipping them to the market. A lot of procedures that must be handled carefully for improving postharvest management are as follows; digging, trimming, gathering, putting in storage containers, carrying them from field to house, curing, storing, washing, drying, selecting marketable roots, packing and shipping to the market, etc.. Sweetpotatoes have a high moisture content, and a relatively thin and delicate skin, and are sensitive to chilling, so careless postharvest handling can lead to both quantitative and qualitative losses which may be extremely high in some circumstances. From now on research has concentrated on the improvement of postharvest conditions to increase yield and lower disease rates. Storage, which makes sweetpotatoes available through out the year, benefits both the producer and the consumer. Seven very important points must be needed in order to get the best quality marketable roots in the storing of sweetpotatos : $\circled1$The storage house must be clean and sanitary, $\circled2$The crop must be harvested before the first frost to avoid low-temperature injury, $\circled3$Particular care must be taken to avoid cutting, bruising, or other injuries of the sweetpotatoes during digging, picking up, grading, placing in containers, and moving to the storage house, $\circled4$Select sound, disease-free roots for storage $\circled5$Sweetpotatoes should be stored in properly stacked containers $\circled6$Cure immediately after harvest, preferably at 32∼33$^{\circ}C$ and 90 to 95 percent relative humidity for 4 to 7 days, After curing the temperature should be reduced to 13$^{\circ}C$ to 16$^{\circ}C$ by ventilating the storage with outside air. $\circled7$Store at 12$^{\circ}C$ to 14$^{\circ}C$ and a relative humidity of 80 to 85 percent. Storage houses should be located on suitable sites and should be tightly constructed and insulated so that temperature and humidity will be uniform. Sweetpotatoes are usually not washed and graded, and lately sometimes washed, graded, waxed, before being shipped to market. Consumer packaging of sweetpotatoes in paper boxes(10-15kg) or film bags is done mainly to aid marketing. The shelf life of washed roots in consumer packs in only 1 to 2 weeks. Weight loss of roots during marketing is much less in perforated film bags than in mesh and paper bags. Perforation of 0.8 to 1kg polyethylene bags with about six 6mm holes is essential ; to lower the internal relative humidity and avoid excessive sprouting, rooting, and dampness. Development and use of better postharvest handling with good storage facilities or marketing methods can minimize sweetpotate losses and has an effect of indirectly increasing productivity and farmer’s income.

중국 CCTV-9 채널 시청자의 프로그램 관람 만족도 결정요인 분석 (Analysis of Influence Factors on the Satisfaction of Viewers on China's CCTV-9 Channel)

  • 궈위엔;왕지봉
    • 한국엔터테인먼트산업학회논문지
    • /
    • 제15권8호
    • /
    • pp.107-116
    • /
    • 2021
  • 최근 수년간 시청자들의 프로그램 관람 후 만족도에 대한 연구는 다양한 분야에서 진행돼 왔다. 하지만 새롭게 구축된 CCTV-9 채널의 시청자 만족도 요인을 단순 분석하는 연구의 전례가 없었다. 그러므로 CCTV-9에서 어떻게 하면 빅데이터 시대에 대중적 욕구를 출발점으로 삼아 산업발전을 모색할 수 있을 것인가 하는 전략은 매우 중요한 일환(一環)이라고 할 수 있다. 본문은 CCTV-9의 시청자만족도와 관련된 영향 요인을 탐색적으로 연구하고 설문조사 방식으로 연령, 학력, 전공, 소득을 달리하는 101명의 남녀를 설문조사 하여 이 채널의 만족도 표본을 검증하여 채널만족도와 관련된 영향 인자로 아홉 가지 가설을 시험적으로 제시하였다. 실증분석을 통해 기록채널의 시청자 만족도에 영향을 미치는 결정요인을 연구하고 측정의 신뢰성과 유효성을 적절히 분석했으며 모든 가설을 통계적으로 검증했다. 본 연구의 실증 결과는 재제내용, 프로그램 형식, 프로그램 섹션 편성, 방송시간, 채널의 광고 포지션, 시리즈 다큐멘터리, 다양화 홍보 플랫폼, 입체화 브랜드 이미지는 시청자 만족도와 큰 관련이 있다.

플립칩용 에폭시 접착제의 저온 속경화 거동에 미치는 경화제의 영향 (Effects of Hardeners on the Low-Temperature Snap Cure Behaviors of Epoxy Adhesives for Flip Chip Bonding)

  • 최원정;유세훈;이효수;김목순;김준기
    • 한국재료학회지
    • /
    • 제22권9호
    • /
    • pp.454-458
    • /
    • 2012
  • Various adhesive materials are used in flip chip packaging for electrical interconnection and structural reinforcement. In cases of COF(chip on film) packages, low temperature bonding adhesive is currently needed for the utilization of low thermal resistance substrate films, such as PEN(polyethylene naphthalate) and PET(polyethylene terephthalate). In this study, the effects of anhydride and dihydrazide hardeners on the low-temperature snap cure behavior of epoxy based non-conductive pastes(NCPs) were investigated to reduce flip chip bonding temperature. Dynamic DSC(differential scanning calorimetry) and isothermal DEA(dielectric analysis) results showed that the curing rate of MHHPA(hexahydro-4-methylphthalic anhydride) at $160^{\circ}C$ was faster than that of ADH(adipic dihydrazide) when considering the onset and peak curing temperatures. In a die shear test performed after flip chip bonding, however, ADH-containing formulations indicated faster trends in reaching saturated bond strength values due to the post curing effect. More enhanced HAST(highly accelerated stress test) reliability could be achieved in an assembly having a higher initial bond strength and, thus, MHHPA is considered to be a more effective hardener than ADH for low temperature snap cure NCPs.

포도 저장을 위한 아황산가스 발생제의 제조 및 처리 방법 (Preparation and Treatment of Sulfur Dioxide Gas Generating Agent for Storage of Grape Fruits)

  • 최성진
    • 한국식품저장유통학회지
    • /
    • 제15권6호
    • /
    • pp.791-795
    • /
    • 2008
  • 아황산가스 발생제를 자가 제조하여 포도의 저장 중 병해발생 방지에 이용하는 방법을 확립하기 위하여 sulfite 화합물의 아황산가스 발생 정도와 지속 기간을 측정하고 아황산가스 발생 조절 및 간이 검출 방법을 개발하였다. 포도의 저장 중 잿빛곰팡이병을 일으키는 B. cinerea의 포자 발아와 균사생장은 각각 400 ppm과 3200 ppm의 아황산가스 농도 조건에서 억제되었다. 5종류의 sulfite 및 bisulfite 화합물 중 sodium hydrosulfite는 아황산가스 발생량이 가장 높았으며 이를 비닐 포장하여 포장의 pinhole수를 조절하거나 산 또는 알카리의 pH 조절제를 혼합하면 가스 발생량과 발생 지속 기간을 조절할 수 있었다. Malachite green 용액은 아황산가스에 의해 정량적으로 탈색되어 아황산가스 검출에 이용할 수 있었으며 여과지에 흡수하여 건조할 경우 아황산가스 검출지로 활용할 수 있었다. MBA 포도를 속효성과 지효성의 아황산가스 발생제를 동시에 처리하여 저온 저장할 경우 병해 발생을 감소시킬 수 있었다.

미세 피치를 갖는 MEMS 프로브 팁의 설계 및 기계적 특성 평가 (Assessment of Design and Mechanical Characteristics of MEMS Probe Tip with Fine Pitch)

  • 하석재;김동우;신봉철;조명우;한청수
    • 한국산학기술학회논문지
    • /
    • 제11권4호
    • /
    • pp.1210-1215
    • /
    • 2010
  • 프로브 카드는 반도체 제조 공정 전에 반도체 소자 및 필름의 기능과 성능을 검사하기 위한 테스트 장비이다. 반도체 산업의 급속한 기술 발전과 반도체 소자의 고집적화로 인하여 반도체 소자의 패드 간격과 패드의 수가 증가하고 있다. 따라서 반도체 소자의 크기 및 배열의 형태가 계속 축소됨에 따라 미세 피치를 갖고 검사용 핀의 수가 많은 프로브 카드가 필요하다. 본 논문에서는 수직형 프로브 카드의 적용을 위하여 MEMS 기술을 이용한 프로브 팁을 개발하였다. 프로브 팁의 설계를 위해서 유한요소해석을 이용하여 프로브 팁의 구조 및 기계적 특성에 대한 구조설계를 수행하였다. 또한 구조 설계를 적용한 프로브 팁을 제작하여 유한요소해석의 결과와 실제 시험을 통한 접촉력의 평가를 수행하였다. 이에 따라 피치 간격이 약 $50{\mu}m$이하의 프로브 카드를 제작하였다.

RF Reactive Sputtering법에 의한 산화주석 박막의 제조 및 특성 (Characterization and Fabrication of Tin Oxide Thin Film by RF Reactive Sputtering)

  • 김영래;김선필;김성동;김은경
    • 한국재료학회지
    • /
    • 제20권9호
    • /
    • pp.494-499
    • /
    • 2010
  • Tin oxide thin films were prepared on borosilicate glass by rf reactive sputtering at different deposition powers, process pressures and substrate temperatures. The ratio of oxygen/argon gas flow was fixed as 10 sccm / 60 sccm in this study. The structural, electrical and optical properties were examined by the design of experiment to evaluate the optimized processing conditions. The Taguchi method was used in this study. The films were characterized by X-ray diffraction, UV-Vis spectrometer, Hall effect measurements and atomic force microscope. Tin oxide thin films exhibited three types of crystal structures, namely, amorphous, SnO and $SnO_2$. In the case of amorphous thin films the optical band gap was widely spread from 2.30 to 3.36 eV and showed n-type conductivity. While the SnO thin films had an optical band gap of 2.24-2.49 eV and revealed p-type conductivity, the $SnO_2$ thin films showed an optical band gap of 3.33-3.63 eV and n-type conductivity. Among the three process parameters, the plasma power had the most impact on changing the structural, electrical and optical properties of the tin oxide thin films. It was also found that the grain size of the tin oxide thin films was dependent on the substrate temperature. However, the substrate temperature has very little effect on electrical and optical properties.

Full Color Top Emission AMOLED Displays on Flexible Metal Foil

  • Hack, Michael;Hewitt, Richard;Urbanik, Ken;Chwang, Anna;Brown, Julie J.;Lu, Jeng Ping;Shih, Chinwen;Ho, Jackson;Street, Bob;Ramos, Teresa;Rutherford, Nicole;Tognoni, Keith;Anderson, Bob;Huffman, Dave
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
    • /
    • pp.305-308
    • /
    • 2006
  • Advanced mobile communication devices require a bright, high information content display in a small, light-weight, low power consumption package. For portable applications flexible (or conformable) and rugged displays will be the future. In this paper we outline our progress towards developing such a low power consumption active-matrix flexible OLED $(FOLED^{TM})$ display. We demonstrate full color 100 ppi QVGA active matrix OLED displays on flexible stainless steel substrates. Our work in this area is focused on integrating three critical enabling technologies. The first technology component is based on UDC's high efficiency long-lived phosphorescent OLED $(PHOLED^{TM})$ device technology, which has now been commercially demonstrated as meeting the low power consumption performance requirements for mobile display applications. Secondly, is the development of flexible active-matrix backplanes, and for this our team are employing PARC's Excimer Laser Annealed (ELA) poly-Si TFTs formed on metal foil substrates as this approach represents an attractive alternative to fabricating poly-Si TFTs on plastic for the realization of first generation flexible active matrix OLED displays. Unlike most plastics, metal foil substrates can withstand a large thermal load and do not require a moisture and oxygen permeation barrier. Thirdly, the key to reliable operation is to ensure that the organic materials are fully encapsulated in a package designed for repetitive flexing, and in this device we employ a multilayer thin film Barix encapsulation technology in collaboration with Vitex systems. Drive electronics and mechanical packaging are provided by L3 Displays.

  • PDF