• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1524-1531
• /
• 2004

This study analyzes a load balancing technique using Round Robin Algorithm. The study uses two software packages (Packet Capture and Round Robin Test Package) to check packet volume from Virtual Network structure (data generator, virtual server, Server1,2,3), and finds out traffic distribution toward Server1,2 and 3. The functions of implemented Round Robin Load Balancing Monitoring System include round robin testing, system monitoring, and graphical indication of data transmission and packet volume. As the result of the study shows, Round Robin Algorithm allows servers to ensure definite traffic distribution, unless incoming data loads differ much. Although error levels are high in some cases, they were eventually alleviated by repeated tests for a long period of time.

• Journal of the Korean Institute of Gas
• /
• v.11 no.4
• /
• pp.47-53
• /
• 2007

The safe operation of high pressure pipe line systems is of significant importance. Leaks due to faulty operation from the pipelines can lead to considerable product losses and to exposure of community to dangerous gases. There are several leak detection methods, which have been recently suggested on pipeline network. The negative pressure wave detection technology, which has advantages of short time detection availability, accurate leaking location estimate capability and cost effective, is concentrated in this study. Theoretical analysis of the flow characteristics for leaking through a hole on the pipe wall has been performed by using CFD++, commercial CFD package. The results of 3-dimensional analysis near leaking hole confirm the occurrence of negative pressure wave and verify the characteristics of propagation of the wave which travels with speed equal to the speed of sound in the pipeline contents. For the application of long pipe line system. The method of 1-dimensional analysis has been suggested and verified with results of CFD++.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.881-886
• /
• 2010

A novel Schiff base N-(2,4-dinitro-phenyl)-N'-(1-phenyl-ethylidene)-hydrazine has been synthesized and structurally characterized by X-ray single crystal diffraction, elemental analysis, IR spectra and UV-vis spectrum. The crystal belongs to monoclinic with space group P21/n. The molecules are connected via intermolecular O-$H{\cdots}O$ hydrogen bonds into 1D infinite chains. The crystal structure is consolidated by the intramolecular N-$H{\cdots}O$ hydrogen bonds. weak intermolecular C-$H{\cdots}O$ hydrogen bonds link the molecules into intriguing 3D framework. Furthermore, Density functional theory (DFT) calculations of the structure, stabilities, orbital energies, composition characteristics of some frontier molecular orbitals and Mulliken charge distributions of the title compound were performed by means of Gaussian 03W package and taking B3LYP/6-31G(d) basis set. The time-dependent DFT calculations have been employed to calculate the electronic spectrum of the title compound, and the UV-vis spectra has been discussed on this basis. The results show that DFT method at B3LYP/6-31G(d) level can well reproduce the structure of the title compound.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.6
• /
• pp.831-841
• /
• 2010

Usability evaluation of physical products involves characterizing complex physical interactions between humans and products. Human models known as manikins have been widely utilized as usability evaluation tools for automobile interior package design. When combined with computer-aided design software programs, such manikins can be used to simulate driving postures and evaluate driver-interior fits early in the design process, and therefore, may greatly facilitate achieving high-quality design in a cost-efficient manner. The purpose of this study was to define a set of manikins for designing automobile interior packages for the South Korean male population. These manikins were conceptualized as "boundary" manikins, which represent individuals lacking in certain physical capacities or having usability-related issues (e.g., an individual with the 5th percentile forward reach capability, an individual with the 95th percentile shoulder width). Such boundary manikins can serve as an efficient tool for determining if an automobile interior design accommodates the majority of the population. The boundary manikins were selected from the large sample of Korean males whose anthropometric dimensions were described in the recent Size Korea anthropometric database. For each male in the database, his comfortable driving posture was represented using a kinematic body linkage model and various physical capacity measured and usability-related characteristics relevant to driver accommodation were evaluated. For each such measure, a boundary manikin was selected among the Korean males. The manikins defined in this study are expected to serve as tools for ergonomic design of automobile interior packages. The manikin selection method developed in this study was implemented as a generic software program useful for various product design applications.

• Journal of Bio-Environment Control
• /
• v.24 no.2
• /
• pp.79-84
• /
• 2015

This study was carried out in order to develop an economical and convenient way to improve storability of sweet persimmon 'Fuyu'. Natural porous materials (bamboo active carbon, chaff charcoal, and Ge-lite) pouching bags were enveloped in the conventional LDPE (low density polyethylene) package during room temperature and low temperature storage. The changes of soluble solids content, flesh firmness, flavor, decay, and softening of sweet persimmon were investigated in the 1- or 2-week intervals. The LDPE packaging with bamboo active carbon treatment was confirmed to maintain longer storability and higher quality than the LDPE packaging only. This method is expected to be applied to both of conventional and organic farming as an economical and convenient way to improve storability on long term storage and during distribution.

• Steel and Composite Structures
• /
• v.1 no.4
• /
• pp.427-440
• /
• 2001

The growing use of unprotected or partially protected steelwork in buildings has caused a lively debate regarding the safety of this form of construction. A good deal of recent research has indicated that steel members have a substantial inherent ability to resist fire so that additional fire protection can be either reduced or eliminated completely. A performance based philosophy also extends the study into the effect of structural continuity and the performance of the whole structural totality. As part of the structural system, thermal expansion during the heating phase or contraction during the cooling phase in most beams is likely to be restrained by adjacent parts of the whole system or sub-frame assembly due to compartmentation. This has not been properly addressed before. This paper describes an experimental programme in which unprotected steel beams were tested under load while it is restrained between two columns and additional horizontal restraints with particular concern on the effect of catenary action in the beams when subjected to large deflection at very high temperature. This paper also presents a three-dimensional mathematical modelling, based on the finite element method, of the series of fire tests on the part-frame. The complete analysis starts with an evaluation of temperature distribution in the structure at various time levels. It is followed by a detail 3-D finite element analysis on its structural response as a result of the changing temperature distribution. The principal part of the analysis makes use of an existing finite element package FEAST. The effect of columns being fire-protected and the beam being axially restrained has been modelled adequately in terms of their thermal and structural responses. The consequence of the beam being restrained is that the axial force in the restrained beam starts as a compression, which increases gradually up to a point when the material has deteriorated to such a level that the beam deflects excessively. The axial compression force drops rapidly and changes into a tension force leading to a catenary action, which slows down the beam deflection from running away. Design engineers will be benefited with the consideration of the catenary action.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.5
• /
• pp.405-414
• /
• 2015

Fluid transport is a key issue in the development of microfluidic systems. Recently, Myong (2014) has proposed a new concept for droplet transport without external power sources and numerically validated the results for a hypothetical 2D, initially having a hemicylindrical droplet. In this paper, the movement of an actual water droplet, initially having a 3D hemispherical shape, on horizontal hydrophilic/hydrophobic surfaces is simulated using a commercial computational fluid dynamics (CFD) package, Fluent, with VOF (volume of fluid) method. The results are compared with the 2D analysis of Myong (2014), and the transport mechanism for the actual water droplet is examined based on the numerical results of the time evolution of the droplet shape, as well as the total kinetic, gravitational, surface free and pressure energies inside the droplet.

• YAKHAK HOEJI
• /
• v.52 no.6
• /
• pp.507-513
• /
• 2008

The purpose of this study is to analyze the factors affecting financial performance of community pharmacies after the implementation of the new drug policy in Korea: separation of drug prescription and dispensing (SPD). The online survey questionnaires were sent to the active pharmacists of the total 20,633 community pharmacies in Korea and 1,147 pharmacists responded to the survey (the response rate was 5.5%). The questionnaire asked simple financial data in order to compare their financial performances before and after the policy. With the SPSS package (version 12.0), two levels of data analysis were used: 1) descriptive statistics to see the financial status of the pharmacies; and 2) multiple regression analysis to find the factors. {or A multiple regression method was used for the data analysis.} The finding illustrated that the average net benefit of the pharmacies was 4,870 thousand won in August 2006, and the major factors affecting the net benefit were the location of pharmacy (geographical proximity to medical institutions), number of prescriptions, drug management services for patients, chain pharmacy membership. The findings of this study suggest that service improvement for patients, revitalization of non-prescription drug sales, professional management will contribute to promote community based pharmacy business.

• Food Science and Preservation
• /
• v.10 no.4
• /
• pp.574-583
• /
• 2003

There have been a lot of research efforts on development of active food packaging structures and materials in the form of plastic films and containers, along with investigating novel polymers and bioactive compounds for packaging purpose, in order to improve storage stability and safety of foods during distribution and sale. Recently, great interests focus on antimicrobial package films, as an active packaging system, made from synthetic plastic polymer% and natural biopolymers containing various antimicrobial substances for food packaging applications. In this active system, substances are slowly released onto the food surface. However, antimicrobial activity as well as physical properties of the films can be significantly influenced by several factors such as polymer matrix, antimicrobial compounds, and interactions between polymers and compounds. Thus, this study reviews present status of antimicrobial food packaging films in overall performance aspects including types of polymers and active substances, test for antimicrobial activity, and changes in mechanical and antimicrobial properties by preparation method.

• Journal of the Ergonomics Society of Korea
• /
• v.27 no.4
• /
• pp.109-117
• /
• 2008

Compared to the existing PC which uses a mouse and a keyboard, the touchscreen-based portable PC allows the user to use fingers, requiring new operation methods. However, current touchscreen-based web browser operations in many cases involve merely having fingers move simply like a mouse and click, or not corresponding well to the user's sensitivity and the structure of one's index finger, making itself difficult to be used during walking. Therefore, the goal of this study is to develop finger gestures which facilitate the interaction between the interface and the user, and make the operation easier. First, based on the frequency of usage in the web browser and preference, top eight functions were extracted. Then, the users' structural knowledge was visualized through sketch maps, and the finger gestures which were applicable in touchscreens were derived through the Meaning in Mediated Action method. For the front/back page, and up/down scroll functions, directional gestures were derived, and for the window closure, refresh, home and print functions, letter-type and icon-type gestures were drawn. A validation experiment was performed to compare the performance between existing operation methods and the proposed one in terms of execution time, error rate, and preference, and as a result, directional gestures and letter-type gestures showed better performance than the existing methods. These results suggest that not only during the operation of touchscreen-based web browser in portable PC but also during the operation of telematics-related functions in automobile, PDA and so on, the new gestures can be used to make operation easier and faster.