• Journal of the Korean Chemical Society
• /
• v.28 no.5
• /
• pp.328-334
• /
• 1984

A series of phenyl N-benzenesulfonylchloroformimidate derivatives (p-H, p-Cl, p-CH3 & p-OCH3) were prepared and the hydrolysis of these compounds were studied kinetically at various pH by UV spectrophotometry in 1 ; 4 dioxane-water at $25^{\circ}C$. Hammett ${\rho}$ values measured at pH 5.0 (${\rho}$ = -0.45) and pH 10.0 (${\rho}$ = 0.40) indicate that the reaction proceeds via an azocarbonium ion intermediate in the acidic medium, whereas, it involves direct attack by hydroxide ion on the azomethine carbon atom occurs under the basic medium. The formation of stabilized azocarbonium ion species at pH 5.0 is also consistent with the large solvent effect(m = 1.3-1.5 & n = 5.0-5.5). On the basis of these findings, we may concluded that the hydrolysis of phenyl N-benzenesulfonylchloroformimidate derivatives proceeds by $SN_1$ below pH 8.0, however, above pH 10.0, the hydrolysis proceeds through $SN_2$ and in the range of pH 8.0-10.0, these two reactions occur competitively.

• KSBB Journal
• /
• v.24 no.3
• /
• pp.303-311
• /
• 2009

A scaling up study for the exopolysaccharide (EPS) production by submerged culture of Ganoderma lucidum was carried out in jar fermenter systems (2.6, 20 and 75 L) under bi-staged pH process. Profiles of dissolved oxygen (DO) and volumetric coefficient of oxygen transfer ($k_La$) as a function of operating variables (agitation speed and aeration rate) was investigated, and a correlation between $k_La$ and operating variables was analysed statistically. Under bi-staged pH process, no limitation of DO was observed at agitation speeds tested in the range of 200 and 600 rpm, and the highest EPS production was obtained at the level of DO of $40{\sim}80%$. From the regression analysis, the relation between $k_La$, gas velocity (Vs), stirrer speed (N) and impeller diameter (Di) could be expressed as : $$k_La=0.555{\times}Vs^{0.42}{\times}(N^3{\times}Di^2)^{0.33}\;(R^2=0.925,\;p<0.05)$$ It was found that under 2.6 L jar fermenter, the optimum agitation speed and aeration rate was 400 rpm and 1 vvm, respectively, obtaining the EPS production of 15.43 g/L. Under the submerged cultivation of G. lucidum in jar fermenters of $2.6{\sim}75\;L$, the similar EPS yields at each fermenter were achieved during scaling up based on $k_La$, and $k_La$ value for maximum EPS production was $85.4{\pm}26.70\;h^{-1}$.

• Current Research on Agriculture and Life Sciences
• /
• v.28
• /
• pp.9-15
• /
• 2010

Extraction Efficiency of colorants from sorghum and its storage stability were examined according to the various extracting and storage conditions in this study. The obtained results were as follows ; The absorbance values of extracted colorants were increased with increasing extract time and temperature. The extraction at pH 4 extract was most efficient among the various pH conditions. In the juice extractor system, the amount of extracted colorant was more in distilled water pre-treatment than pH 5, but it was more in pH 5 in the long time pre-treatment above 20 hour. The color of extract solutions changed through variation of the pH. Its color changed from light yellow to heavy yellow finally red ton by pH increasing. The Methionine addition gave an effect on the storage stability of colorant solution and then had better storage stability. And so it delayed the color change up to storge period 18th day and the stabilizing effect was revealed in order of Methionine 10mmol-addition>20mmol-addtion>non-addtion.

• Smart Structures and Systems
• /
• v.4 no.5
• /
• pp.531-548
• /
• 2008

Recently, dense sensor instrumentation for structural health monitoring has motivated the need for novel passive wireless sensors that do not require a portable power source, such as batteries. Using a layer-by-layer self-assembly process, nano-structured multifunctional carbon nanotube-based thin film sensors of controlled morphology are fabricated. Through judicious selection of polyelectrolytic constituents, specific sensing transduction mechanisms can be encoded within these homogenous thin films. In this study, the thin films are specifically designed to change electrical properties to strain and pH stimulus. Validation of wireless communications is performed using traditional magnetic coil antennas of various turns for passive RFID (radio frequency identification) applications. Preliminary experimental results shown in this study have identified characteristic frequency and bandwidth changes in tandem with varying strain and pH, respectively. Finally, ongoing research is presented on the use of gold nanocolloids and carbon nanotubes during layer-by-layer assembly to fabricate highly conductive coil antennas for wireless communications.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.11
• /
• pp.2017-2023
• /
• 2000

A dynamic model was applied to compare the environmental parameters and effluent characteristics of refinery wastewater in activated sludge treatment. The measured DO, pH, MLSS, and COD values were compared with the simulated their results in the activated sludge reactor. As results of simulation. good agreements between the measured and simulated results were investigated. The simulated and measured effluent COD were 19.0~19.4mg/L and 23.1mg/L. respectively. The simulated and measured DO were 1.9~2.4mg/L and 2.2mg/L. respectively.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.5
• /
• pp.627-632
• /
• 2003

The pH dependence of the kinetic parameters of recombinant acetohydroxy acid synthase catalyzed reaction was determined in order to obtain information about the chemical mechanism, particularly acid-base chemistry. The maximum velocity and V/K for pyruvate were bell-shaped with estimated pK values of 6.5-6.7 and 8.6-8.9, respectively. The maximum velocity and V/K for 2-ketobutyrate were also bell-shaped with estimated pK values of 6.6-7.0 and 8.4-8.6. The pH dependence of 1/Ki for 3-bromopyruvate, a competitive inhibitor of pyruvate, was also bell-shaped, giving pK values almost identical with those obtained for pyruvate. Since the same pK values were observed in the $pK_{i 3-bromopyruvate}$, V/K pH profiles and $V_{max}$ profiles, both enzyme groups must be in their optimum protonation state for efficient binding of reactants. These results reflect that two enzyme groups are necessary for binding of substrate and/or catalysis.

• Journal of environmental and Sanitary engineering
• /
• v.15 no.1
• /
• pp.7-13
• /
• 2000

To develop the removal technique of algal bloom the efficiencies of algal flocculation/ autoflotation by the kinds of coagulant and oversaturated oxygen concentration were investigated. The summarized results are as follow. 1. In the algae flocculation test with alum[$Al_2(SO_4)_3{\cdot}18H_2O$], optimum pH was 5.5 and, with chitosan optimum pH was 7.0. 2. Chitosan which was natural polymer showed the 5~10 times higher algal biomass flocculation efficiency than alum in the condition of same algal concentration. 3. For the each coagulant, the higher ${\Delta}DO$(oversaturated dissolved oxygen concentration - saturated dissolved oxygen) was, the faster the rising velocity of the algal floc was. 4. In the condition of about 4mg/L ${\Delta}DO$, the rising velocity of chitosan is about 2 times higher than that of alum, and chitosan formed the stronger algal floc.

• Journal of Korean Society on Water Environment
• /
• v.20 no.6
• /
• pp.610-614
• /
• 2004

The objective of this study was to remove organics and color in livestock wastewater using coagulation and Fenton oxidation process. After coagulation process as $1^{st}$ treatment, organics in $1^{st}$ treatment water were removed by using OH radical produced in Fenton oxidation process. Removal efficiencies of $COD_{Mn}$ and color were 87.2% and 95.7% separately. At that time, the ratio of $Fe^{2+}/H_2O_2$ was 0.8~1.0, and range of reaction pH was effective at the pH of 3.5~3.8. The Reaction time of 120min more than 60min or 90min was sufficient in Fenton process. Removal efficiency of organics was higher two- or multi-stage treatment than one-stage treatment.

• Environmental Engineering Research
• /
• v.25 no.2
• /
• pp.212-221
• /
• 2020

This work discusses the palm oil mill processing carried out at Jugra Palm Oil Mill Sdn Bhd, situated at Selangor, Malaysia with the capacity of 45-t fresh fruit bunch (FFB)/h. Typically, oil palm residues and palm oil mill effluent (POME) from FFB are generated while processing. Prior to discharge, POME should be treated to remove pollutants in the effluent. As such, the performances of anaerobic and aerobic ponds were assessed in this study to determine temperature, pH, biological oxygen demand (BOD), sludge volume index (SVI), and dissolved oxygen (DO). From the experiments, mesophilic temperature due to better process stability was applied in anaerobic ponds. The pH results displayed a fluctuating trend between lower control limit and upper control limit, and, the pH value increased from one pond to another. The final discharge BOD and SVI appeared to be lower than 100 mg/L and 10 mL/L indicating low degree of pollution and good settling ability for biomass/solid. DO was close to normal, mostly below 2 mg/L. The experimental outcomes revealed the effective treatability of POME in adherence to the standard regulation, which is the priority for environmental sustainability within this industry domain.

• KSBB Journal
• /
• v.15 no.2
• /
• pp.134-138
• /
• 2000

Addition of carbon and nitrogen source to an alcohol distillery wastewater was tried to increase the cell concentration of a b baker's yeast cultivated in that wastewater. Carbon was found to be primary limiting nutrient and nitrogen secondary limiting o one. Glucose addition increased the cell concentration 1.3 times higher than no addition, and both glucose and $(NH_4)_2S0_4$ a addition did 5.8 times. A fed-batch cultivation by the automatic addition of glucose and ammonium was executed. Added g glu$\infty$se was automatically controlled to low concentration by a method using DO as control parameter. Ammonium was a automatically added as NH40H used as pH $\infty$ntrol agent after initiating glucose addition. By this simple cultivation method t the cell concentration $\infty$내d be efficiently increased from 2.6g/L to 12.0g/L, and maximum specific growth rate and biomass y yield to glu$\infty$se were $0.18hr^{-1}$ and about 0.54g/g respectively. By increasing cell concentration, COD of the wastewater m media could be additionally reduced by about 22%.