• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.9
• /
• pp.1367-1373
• /
• 2007

The aim of this study was to determine the feeding value to sheep of Acacia saligna grown under temperate conditions. Pen trials were undertaken to determine the effects of feeding A. saligna, which had been grown in a Mediterranean environment, on feed intake, nitrogen balance and rumen metabolism in sheep. Sheep were given ad libitum access to A. saligna with or without supplementation with PEG 4,000 or PEG 6,000. PEG 4000 appears to be the major detannification agent used in trials involving high tannin feed despite the fact that PEG 6000 has been shown to be more effective, in vitro. For this reason it was of interest to compare the two, in vivo. Dry matter intake was greater (p<0.05) in sheep supplemented with either PEG 4,000 or PEG 6,000 compared to the control. There was no difference, however, in intake between those supplemented with either PEG 4,000 or 6,000. Although animals were not weighed throughout the trial, a loss in body condition was obvious, in particular in the control group. Intake of N was greater (p<0.05) in sheep supplemented with either PEG 4,000 or PEG 6,000 than in the control. There was no difference in N intake between those supplemented with either PEG 4,000 or PEG 6,000. There were no significant differences in either the faecal or urinary N output between any of the treatment groups and all treatment groups were in negative N balance. Neither the average nor maximum pH of ruminal fluid of the control group was different to those supplemented with PEG. The minimum pH for the control group, however, was significantly higher (p<0.05) than for either of the PEG treatments. The average and the maximum ammonia levels were lower (p<0.05) in the control group compared with those in either of the PEG treatment groups. For all dietary treatments ruminal ammonia levels were well below the threshold for maximal microbial growth. Feeding A. saligna, without PEG, had a definite defaunating effect on the rumen. For all dietary treatments ruminal ammonia levels were well below the threshold for maximal microbial growth. It was concluded that A. saligna was inadequate as the sole source of nutrients for sheep, even with the addition of PEG 4,000 or PEG 6,000. The anti-nutritional effects on the animals were largely attributed to the excessive biological activity of the phenolics in the A. saligna leaves. There is a need to determine other supplements that may be complimentary with PEG to enhance the nutritive value of A. saligna to maintain a minimum of animal maintenance.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.2
• /
• pp.136-141
• /
• 1997

In this study, we can be obtained the following conclusions about the characteristics of leachate with passed time in the expired landfill. Compared with the expired landfilling H. and S., pH shows a tendency to increase in E., because $NH_3$ is created by anaerobic degradation and dissolved in leachate. The initial BOD and COD of E. and S. are high in similar concentration but H. is low, Since the organics of waste in H. are lower than in E. and S. during landfilling. SS of E. in concentration is increased and very altered, because food of combustible in E. is higher than it in H. and S.. According to passed time, T-N is high in concentration but T-P shows a similar tendency. Heavy metals of leachate is lower than threshold concentrations. If leachate is treated biologically, microbes are not inibitory.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1413-1415
• /
• 2005

The OTFT performance depends strongly on the interfacial properties between an organic semiconductor and ${\alpha}$ metal electrode. The contact resistance is critical to the current flow in the device. The contact resistance arises mainly from the Schottky barrier formation due to the work function difference between the semiconductor and electrodes. We doped pentacene/source-drain interfaces with $F_4TCNQ$ (2,3,5,6-Tetrafluoro-7,7,8,8-tetracyanoquinodimethane), resulting in p-doped region at the SD contacts, in order to solve this problem. We found that the mobility increased and the threshold voltage decreased.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.136-136
• /
• 2011

반도체 및 전자기기 산업에 있어서 NVM은 아주 중요한 부분을 차지하고 있다. NVM은 디스플레이 분야에 많은 기여를 하고 있는데, 측히 AMOLED에 적용이 가능하여 온도에 따라 변하는 구동 전류, 휘도, color balance에 따른 문제를 해결하는데 큰 역할을 한다. 본 연구에서는 bottom gate 구조의 nc-Si NVM 실험을 진행하였다. P-type silicon substrate (0.01~0.02 ${\Omega}-cm$) 위에 Blocking layer 층인 SiO2 (SiH4:N2O=6:30)를 12.5nm증착하였고, Charge trap layer 층인 SiNx (SiH4:NH3=6:4)를 20 nm 증착하였다. 마지막으로 Tunneling layer 층인 SiOxNy은 N2O (2.5 sccm) 플라즈마 처리를 통해 2.5 nm 증착하였다. 이러한 ONO 구조층 위에 nc-Si을 50 nm 증착후에 Source와 Drain 층을 Al 120 nm로 evaporator 이용하여 증착하였다. 제작한 샘플을 전기적 특성인 Threshold voltage, Subthreshold swing, Field effect mobility, ON/OFF current ratio, Programming & Erasing 특성, Charge retention 특성 등을 알아보았다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.116-116
• /
• 2011

오늘날 표시장치는 경량, 고밀도, 고해상도 대면적화의 요구에 의해 TFT-LCD의 발전이 이루어졌다. TFT에는 반도체 재료로서, Poly-Si을 사용하는 Poly-Si TFT와 a-Si:H를 이용하는 a-Si;H TFT가 있는데 a-Si는 $350^{\circ}C$ 이하의 저온으로 제작이 가능하여 많이 사용되고 있다. 이러한 방향에 맞추어 bottom gate 구조의 a-Si TFT 실험을 진행하였다. P-type silicon substrate ($0.01{\sim}0.02{\Omega}-cm$)에 gate insulator 층인 SiNx (SiH4 : NH3 = 6:60)를 200nm 증착하였다. 그리고 그 위에 active layer 층인 a-Si (SiH4 : H2 : He =2.6 : 10 : 100)을 다른 RF power를 적용하여 100 nm 증착하였다. 그 위에 Source와 Drain 층은 Al 120 nm를 evaporator로 증착하였다. active layer, gate insulator 층은 ICP-CVD 장비를 이용하여 증착하였으며, 공정온도는 $300^{\circ}C$ 로 고정하였다. active layer층 증착시 RF power는 100W, 300W, 500W, 600W로 가변하였고, width/length는 100 um/8um로 고정하였다. 증착한 a-Si layer층을 Raman spectroscope, SEM 측정 하였으며, TFT 제작 후, VG-ID, VD-ID 측정을 통해 전기적 특성인 Threshold voltage, Subthreshold swing, Field effect mobility, ON/OFF current ratio를 비교해 보았다.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.3 no.1
• /
• pp.91-98
• /
• 1993

This study was carried out to investigate characteristic of vinyl chloride emissioned from poly vinyl chloride extrusion process and to evaluate the efficiency of local exhaust ventilation system. Before local ventilation facility was constructed in poly vinyl chloride extrusion process, the average worker exposure to vinyl chloride was 3.15 ppm, which exceeded Threshold Limit Value of American Conference of Gorvernmental Industrial Hygienists (ACGIH-TLV), 1 ppm. lt is possible that vinyl chloride residues in the poly vinyl chloride resin was released or degased due to extrusion heat. The larger the width of vinyl tube become, the higher worker exposure to vinyl chloride was. It is estimated that vinyl chloride from vinyl chloride resin increased as amount of poly vinyl chloride resin extruded in the extrusion process increased. Canopy hood was an appropriate type for poly vinyl chloride resin extrusion process. This local exhaust ventilation has fan static pressure of 7.65 inch wg($190mmH_2O$, total volumetric flowlate of 4,796 CFM ($135.8m^3$/min) and fan power requirement of 12 hp (8.952 Kw). After this local exhaust ventilation was constructed there, the average concentration of worker exposure to vinyl chloride was reduced to be 0.46 ppm, which was below the Threshold Limit Value, 1 ppm. Also, the removal efficiency rate of vinyl chloride attained by local exhaust ventilation was 85.3%. It was a statistically significant (p<0.01).

• Journal of the Korea Concrete Institute
• /
• v.17 no.3 s.87
• /
• pp.481-485
• /
• 2005

The present study examines the distribution of calcium hydroxide, unhydrated cement grain and porosity at the steel-concrete interface. The formation of calcium hydroxide has been confirmed by microscopic analysis using BSE images containing the ITZ between the steel and concrete. It was found that calcium hydroxide does not form a layer on the steel surface, different from the hypothesis that has been available in investigating the corrosion of steel in concrete, ranging from 5 to $10\%$ within the steel surface. Moreover, the high level of porosity at the ITZ was observed, accounting for $30\%$, which may reduce the buffering capacity of cement hydration products against a local fall in the pH. These findings may imply that the mole of ($Cl^-$) :($OH^-$) in pore solution as chloride threshold level lead to wrong judgement or to a wide range of values.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.1
• /
• pp.58-68
• /
• 2015

This study compares the wind stability of Larix kaempferi (Lamb.) Carr., Pinus koraiensis Sie. & Zucc. and Abies holophylla Maxim. to understand and inform wind risk management of these plantation trees at Daegwallyeong, Korea. Temporary square plots of $20m{\times}20m$ ($400m^2$) were laid out, and DBH (Diameter at Breast Height) and height for trees greater than 10 cm in DBH were measured by species. A total of 15 plots with 5 plots each in L. kaempferi, P. koraiensis and A. holophylla stands were sampled at random. Among the species, A. holophylla and P. koraiensis have comparatively lower h/d (Height/DBH) ratios than L. kaempferi. These results indicate that the former two species are more wind firm than the latter species. About 9% of the L. kaempferi trees have higher h/d ratios than the critical threshold limit 80. These trees are vulnerable to wind damage and should be removed in the next thinning regime. The analysis of variance detected a significant difference (p < 0.05) in the h/d ratios and Gini coefficient indicating species differences and DBH size variation, respectively. Gini coefficient was 16.4% in A. holophylla, 15.9% in P. koraiensis and 14% in L. kaempferi stands indicating limited DBH size variation. Lower h/d ratios are attributed to thinning in these stands and tree morphological differences. To increase wind firmness, low thinning should concentrate to remove trees with the h/d ratio above 80 coinciding at the time of stand distinction phase. Forest managers and practitioners should measure and maintain h/d ratios of trees below the critical threshold limit of 80 through stand density management. Variable density thinning approach should be tested to increase tree DBH sizes of the even-aged stands.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.7
• /
• pp.1005-1015
• /
• 2009

Two experiments were carried out to determine the utility of sainfoin hay, a temperate tanniferous forage legume, as a dietary supplement for grass-fed cows. The condensed tannins (CT) of sainfoin might counteract the typical metabolic ammonia load of cows in intensive grazing systems. Furthermore, the physical fibrousness of sainfoin might improve ruminal pH stability. In the preliminary experiment, the eating rate of non-lactating Holstein cows of two tanniferous hays, sainfoin and birdsfoot trefoil, was compared to that of a grass-clover hay after specific periods of time (n = 4). The eating rate of sainfoin was superior to that of the other forages. In the main experiment, designed as a replicated 3${\times}$3 Latin square, six ruminally-cannulated, lactating Red Holstein cows received grass, concentrate and either no supplementation, 3 kg/d of grass hay or 3 kg/d of sainfoin hay (n = 6). Measured intakes of the grass hay and the sainfoin hay were 2.0 and 1.5 kg DM, and two cows entirely refused to eat the sainfoin hay and had to be excluded from data analysis. Grass DMI was similar for cows supplemented with sainfoin hay and cows fed only grass whereas intake of concentrate was higher (p<0.01) for the latter treatment. Continuous measurement of ruminal pH showed that the minimum pH at night tended to be lower (p<0.10) with grass-only feeding compared to sainfoin supplementation, but pH did not decline below the threshold of subacute acidosis for a longer period of time. The slightly higher intake of nitrogen (N) for cows supplemented with sainfoin hay (413 g/d) compared to cows fed only grass (399 g/d) was accompanied by an increased (p<0.05) fecal N excretion and a tendency for an increased (p<0.10) urinary N excretion. Ruminal ammonia concentration, as well as plasma and milk urea, were not affected by sainfoin supplementation. In conclusion, the lack of positive effects typical for CT might be explained either by the limited CT content of this plant species (55 g/kg DM) or the relatively low proportion of sainfoin in the total diet or both. Moreover, due to the unexpected low grass quality, the general ammonia load might have been too low for CT to have an impact.

• Proceedings of the Ginseng society Conference
• /
• 1984.09a
• /
• pp.141-144
• /
• 1984

With microorganism as a single cell model to investigate the cellular effect of total extract of ginseng powder, it was found that ginseng affects cellular respiration biphasically (Tso and Fung, 1980; Tso, 1981). As ginseng is recognized to be a tonic medicinal herb, this finding suggests a possible role of ginseng in altering cellular energy metabolism. Along this line, the same effect on mitochondrial oxygen consumption was studied. It was found that under a controlled pH condition, a significant stimulation of the mitochondrial respiration was observed. This stimulation was ginseng dose-dependent. However, when ginseng was applied at an above threshold concentration, an inhibitory effect was noted. This confirms the previous observation with single cell organism and suggests a universal regulation of energy metabolism effect that transcends cell origin.