• 대한수의학회지
• /
• 제35권4호
• /
• pp.713-727
• /
• 1995

The present study was investigated fatty acid composition of the phospholipid in the RBC membrane, liver and microsomal fraction after vitamin E and/or insulin treatment to evaluate the effect of vitamin E on the oxidative stress in STZ-treated rat and BB rat. Results obtained through the experiments were summarized as follows; 1. Effect of vitamin E and/or insulin treatment in STZ-treated rat 1) In the insulin treated group and the combination treated groups of vitamin E with insulin, body weights were increased compared to STZ-treated rat(STZ control group). Especially it was more significantly increased in the combination treated group of high dose vitamin E with insulin. 2) The composition of fatty acids of the phospholipid in RBC membrane, liver and microsomal fractions was shown a decreased C16:1, C18:1, C20:4 and an increased C16:0, C18:0, C18:2 in STZ control group compared to normal control group. In RBC membrane, liver and microsomal fractions after vitamin E with insulin treatment in STZ-treated rat, effect on the composition of fatty acids of the phospholipid was shown the result of a decreased C16:0, C18:0, C18:2 and an increased C16:1, C18:1, C20:4. 3) Hemolysis rate of the RBC to $H_2O_2$ was increased in the STZ control group and it was decreased below the hemolysis level of normal control group by vitamin E treatment. 2. Effect of vitamin E and/or insulin treatment in BB rat 4) Only in microsomal fraction, fatty acid composition was different between insulin treatment group and vitamin E with insulin treatment group. It was increased C16:0 and C18:1, and decreased C18:0 and C18:2 in vitamin E with insulin treatment group: But C20:4 was not different in two groups. These results suggest that the combination treatment of vitamin E and insulin could prevent the oxidative change of fatty acids in P-lipid of the RBC membrane, liver and microsomal fraction in STZ-treated rats and BB rats.

• 한국식품저장유통학회지
• /
• 제13권3호
• /
• pp.351-356
• /
• 2006

마늘 가공 공정시 발생하는 품질손실과 저장기간 감소, 급속한 변질 등의 문제점을 해결하기 위한 방안으로 PPase를 적용해 식물조직의 단세포를 유리시켰다. 마늘의 단세포화를 위한 최적조건은 250 rpm으로 $37^{\circ}C$의 조건에서 pH 8.0으로 150분 동안 활성화 시킬 때 최적 수율의 단세포화물을 얻었다. 단세포화물과 기계마쇄물의 품질 안정성을 비교한 결과 마늘의 주요 활성요소 성분인 alliin의 함량은 기계 마쇄물이 11 mg/g에서 6.6 mg/g으로, 단세포화물이 8.5 mg/g에서 7.0 mg/g으로 기계 마쇄물에 비해 약 20% 정도 이상의 alliin 유지 능력을 보여주었다. 그리고 SPME와 GC/MS를 이용한 마늘의 향기성분은 확인된 23종 중 총8종의 증감이 있었던 기계마쇄물에 비해 18종 중 4종의 증감이 있었던 단세포화물이 보다 안정한 향기 성분 변화를 보여주었다. 이와 마찬가지로 관능검사 결과를 보더라도 $4^{\circ}C$에서 24일 경과후에도 향기성분 자체의 변화가 거의 없는 단세포화물의 시료가 전체적인 기호도 등 관능검사 결과에서도 좋은 점수를 얻었다.

• 한국식품저장유통학회지
• /
• 제14권1호
• /
• pp.24-29
• /
• 2007

월동배추의 저장방법에 따른 특성과 김치를 위해 절였을 경우 특성을 조사하여 배추의 효과적인 저장방법을 구명하고자 하였다. 저장방법(PE 필름백, 플라스틱 컨테이너, 망저장, 움저장)에 따른 배추의 특성을 3개월 동안 조사한 결과, PE 필름백에 저장한 배추가 겉잎이 부패하는 단점이 있으나 다른 처리에 비해 감모율, 정선 손실율, 외관 등에서 비교적 좋은 결과를 보여주었다. 그러나 저장방법을 달리하여 배추를 절였을 경우에 처리별로 절임특성이 큰 영향을 보이지 않았다. 본 실험 결과로 월동배추의 저장 방법이 절임 특성에는 큰 영향이 없지만 저장방법에 따라서 중량 감모 및 정선손실 정도에 영향을 미치므로 배추는 저장중의 이러한 손실을 줄이고 신선도를 유지할 수 있는 방법에 대한 연구가 보다 필요할 것으로 생각된다.

• 한국수산과학회지
• /
• 제28권5호
• /
• pp.569-576
• /
• 1995

훈제 굴 통조림의 가열살균기준 설정을 위하여 $105^{\circ}C\;-\;115^{\circ}C$의 온도범위에서 Fo-값을 달리하여 살균한 제품을 $5^{\circ}C\;-\;50^{\circ}C$의 서로 다른 온도에 저장하면서 품질의 안전성을 검토하였다. $110^{\circ}C$에서 Fo-값 5.92분 이상으로 살균한 제품은 6개월 동안의 저장에도 pH, 아미노질소의 양, 산가, 그리고 TBA-값에 거의 변화가 없었다. 온도 $105^{\circ}C$ 및 $115^{\circ}C$에서 Fo-값 $5.50\pm0.1$분 및 $6.50\pm0.1$분으로 살균하여 4개월 저장한 제품에서도 같은 결과를 확인하였다. 그러나 온도 $110^{\circ}C$에서 Fo-값 5.92분 미만으로 열처리한 제품에서는 품질변화가 심하게 일어남이 확인되었다. 따라서 훈제 굴 통조림의 가열살균기준으로서는 Fo-값 6.0분이 적당한 것으로 판단되었다.

• Journal of Oral Medicine and Pain
• /
• 제25권4호
• /
• pp.415-425
• /
• 2000

In order to obtain the basic data concerning the optimal lasing conditions in using Nd:YAG laser as an adjunctive modality of periodontal therapy of root planing without irreversible structural deterioration of cervical cementum, the author selected 36 human teeth having no cervical abrasion and caries (; 12 anteriors, 12 premolars. 12 molars) extracted due to periodontal diseases, and divided them into 4 groups as Group I, II, III and IV (; each group of 3 anteriors, 3 premolars, 3 molars), and prepared a cementum specimen with thickness of $1.0mm{\pm}0.2mm$ sectioned longitudinally at the middle of mesio-distal thickness (; Group I) or horizontally at 1mm-2mm below the cemento-enamel junction (; Group II, III, IV) from each tooth of each group by low speed diamond wheel saw, and treated them with 0.5 M ethylene diamine tetraacetic acid (; EDTA, pH=7.4) for 2 minutes for elimination of remnants during tooth-sectioning. And the author applied the laser energy from a fiberoptic delivered, free running, pulsed Nd:YAG laser (; wavelength 1064nm. pulse duration $120{\mu}sec$, fiber diameter $320{{\mu}m}$) to cementum surfaces in triplicates of one experiment under the following lasing conditions: 1. stationary mode of fiber in contact to cementum surfaces without air-spray (; Group I )/with air-spray (; Group II), 2. unidirectional moving mode of fiber in contact to cementum surfaces under speed of 3mm-4mm/sec without air-spray (; Group III)/with air-spray (; Group IV), 3. energy per pulse (mJ/pulse) [; energy density ($J/cm^{2}$)] in order of 1.0W/10Hz (100J/pulse); $124J/cm^{2}$, 0.5W/10Hz (50mJ/pulse); $62J/cm^{2}$, 0.4W/10Hz (40mJ/pulse); $50J/cm^{2}$, 0.3W/10Hz (30mJ/pulse); $37J/cm^{2}$, 4. exposure time of 1 second. And the author applied the platinum coating on surfaces of cementum specimens, and evaluated the characteristics of ultrastructural change on surfaces of cementum using the scanning electron microscopy. In general the ultrastructural loss of cervical cementum irradiated under the same lasing condition of laser energy density occurred least in specimens of Group IV. And especially, the ultrastructural loss of cervical cementum irradiated under the laser energy density of $37J/cm^{2}$ almost did not occur in specimens of Group IV. Therefore, it is considered that the pulsed Nd:YAG laser should be applied with the lasing conditions of unidirectional moving mode of fiber in contact to cementum surfaces under speed of 3mm-4mm/sec with air-spray and of laser energy density within $37J/cm^{2}$ as an adjunctive modality of periodontal therapy of root planing without irreversible structural deterioration of cervical cementum.

• 한국환경과학회지
• /
• 제24권11호
• /
• pp.1485-1491
• /
• 2015

There are two treatment processes that are currently applied to ships are the biological treatment process using the activated sludge and the electrochemical treatment. However, neither of them are able to remove both nitrogen and phosphorus due to their limited ability to remove organic matters, which are main causes of the red tide. This study was conducted to identify the characteristics of nitrogen removal factors from manure wastewater by replacing the final settling tank in SBR (Sequencing Batch Reactor) process and applying immersion type hollow fiber membrane. SBR process is known to have an advantage of the least land requirement in special environment such as in ship and the immersion type hollow fiber membrane is more stable in water quality change. As the result, the average in the cases of DO (Dissolved Oxygen) is 2.9(0. 6~3.9) mg/L which was determined to be the denitrifying microorganism activity in anaerobic conditions. The average in the cases of ORP (Oxidation Reduction Potential) is 98.4~237.3 mV which was determined to be the termination of nitrification since the inflection point was formed on the ORP curve due to decrease in the stirring treatment after the aeration, same as in the cases of DO. Little or no variation in the pH was determined to have positive effect on the nitrification. T-N (Total Nitrigen) removal efficiencies of the finally treated water were 71.4%, 72.3% and 66.5% in relatively average figures, thus was not a distinct prominence. In being applied in ships in the future, the operating conditions and structure improvements are deemed necessary since the MEPC (Marine Environment Protection Committee). 227(64) ship sewage nitrogen is less than the standard of 20 Qi/Qe mg/L or the removal rate of 70%.

• Journal of Periodontal and Implant Science
• /
• 제33권2호
• /
• pp.301-310
• /
• 2003

The purpose of this study is to evaluate the biocompatibility and the biorsorbability of several types of calcium polyphosphate made through change of manufacturing process for 12 month. To solve limitation of calcium phosphate, we developed a new ceramic, Calcium Polyphosphate(CPP), and report the biologic response to CPP in extraction sites of beagle dog. Porous CPP blocks were prepared by condensation of anhydrous $Ca(H_2PO_4)_2$ to form non-crystalline $Ca(PO_3)_2$ and then milled to produce CPP powder. CPP powder, CPP block, and CPP granules added with $Na_2O$ were implanted in extraction sockets and histologic observation were performed at 12 months later. Like 3 months results, histologic observation at 12 months revealed that CPP matrix were mingled with and directly apposed to new bone without any adverse tissue reaction, CPP powder show direct bony contact, but new bone formation and fibrous tissue encapsulation showed in CPP block. 10% $Na_2O$ CPP granules show more inflammatory cells infiltration around graft materials compared at 3 month, but 15% $Na_2O$ CPP granules show less. This result revealed that regardless of addition of $Na_2O$, CPP had a high affinity for bone and had been resorbed slowly. From this results, it was suggested that CPP is promising ceramic as a bone substitute and addition of $Na_2O$ help biodegradation but optimal concentration of $Na_2O$ and other additive component to increase degradation rate should be determined in further study.

• 한국수산과학회지
• /
• 제46권5호
• /
• pp.607-618
• /
• 2013

Marine macroalgal community structures and characteristics of ocean environmental factors were examined seasonally at four sites in Jeju Island, Korea, from March to November 2012. A total of 71 macroalgal species were identified, including 9 green, 7 brown, and 55 red algae. Peyssonnelia capensis occurred at all study sites and in all seasons. The average annual biomass of seaweed was 991.84 g wet $wt/m^2$, with seasonal variations from 543.80 g in autumn to 1,284.17 $g/m^2$ in summer. A green alga, Codium coactum, was the dominant species, occupying 21.31% (211.39 $g/m^2$) of the total algal biomass in Jeju Island. Subdominant species were Ecklonia cava and Lithophyllum okamurae, comprising 20.85% (206.75 $g/m^2$) and 19.64% (194.75 $g/m^2$), respectively, of the total algal biomass in Jeju Island. The vertical distribution of subtidal seaweeds was represented by L. okamurae at 5 m depth, C. coactum at 10 m depth, E. cava at 5-10 m depth and P. capensis at the 20 m depth level. In the present study, crustose coralline algae, which predominated on barren ground, were subdominant species at all study sites. Community indices varied between 0.51-0.63 for dominance index (DI), 5.53-8.14 for richness index (R), 0.51-0.63 for evenness index (J'), and 2.04-2.32 for diversity index (H'). On the basis of seaweed biomass and community indices, Sinchang was the best preserved coastal area, showing maximal values in biomass, and evenness- and diversity-indices, and minimal value in the dominance index, representing stable environmental conditions. In contrast, the Onpyung and Topyeong sites, located near tourist venues such as Udo and Seogwipo were relatively poor habitats based on community indices and biomass. The present results could imply that climate changes alter seaweed community structure, and long-term monitoring of the study sites is required.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1994년도 춘계학술대회논문집; 영남대학교, 20 May 1994
• /
• pp.76-81
• /
• 1994

승용차에 있어 엔진의 공회전시나 주행중에 발생하는 여러 형태의 진동 및 소음의 저감은 승차감 및 차량의 안정성에 있어 중요한 과제가 되고 있다. 이러한 소음, 진동은 주로 엔진에서 발생하는 토크의 비주기적인 변동성분이 클러치(clutch), 변속기(transmission), 구동축을 거쳐 바퀴로 전달되는 과정에서 발생한다. 셔플(shuffle)은 주행중 가속페달(accelerator)을 급조작(tip-in, tip-out)하였을 때 차량이 전후로 과도적으로 울렁거리는 종진동 현상을 말하며, 이것은 가속페달의 급조작으로 인해 엔진토크가 큰 변동을 일으키고, 동력전달계를 통해 타이어에 전달된 이 토오크는 타이어축에서 구동측으로 역토오크를 발생시키기 때문에 발생한다. 여기서 팁-인(tip-in)이란 승용차를 저속으로 운전하다가 갑자기 가속페달을 밟는 경우를 말하며, 팁-아웃(tip-out)은 반대로 고속상태에서 갑자기 가속페달을 떼는 경우를 말한다. 실험과 시뮬레이션을 사용한 자동차 동력전달계의 비틀림 진동에 대한 연구는 이미 여러 연구자들에 의해 보고되었다. H.Arai은 2자유도 비선형 모델을 사용하여 클러치 접속시 발생하는 외란과 계의 안정성을 고려하여 시뮬레이션을 수행하였고, M.Kataoka는 기어의 공차(clearance)를 고려한 변속기의 강제 비틀림 진동을 실험과 시뮬레이션을 통하여 해석하였다. 그리고, Wu Hui-Le는 자동차 동력전달계의 비틀림 진동 현상을 실험과 이론적인 계산을 통해 연구하였고, R.J.Comparin는 치타음의 발생구조와 특성을 고찰하고 비서형 비틀림 공진 저감에 의한 치타음 저감 기법에 대하여 연구하였다. 또한 G.J.Fudala는 다자유도 모델을 이용하여 클러치의 비틀림 특서엥 따라 주파수분석을 수행하여 치타음 저감 방법을 연구하였고, T.Sakai는 5자유도 모델을 이용하여 엔진 공회전시 발생하는 치타음에 대해 이론과 실험을 통해 해석하고, 엔진 회전수 변동, 클러치 특성, 변속기의 드래그(drag) 토크의 영향과 치타음 저감을 위한 개선된 클러치 특성을 제시하였다. 이 외에도 Thomas C.T.와 E.P.Petkus는 특정 차량에 대한 동력전달계의 비틀림 진동 현상에 대해 연구하였다. 이러한 연구들로 볼 때, 자동차 동력전달계에서 발생하는 진동은 이론과 실험을 통해 그 해석이 가능하며 설계에 매우 유용하게 이용되고 있음을 알 수 있다. 따라서, 본 연구는 4 실린더 4 싸이클 1.5 L 엔진을 장착한 경승용차의 실차 주행실험을 통해 가속 페달의 급조작에 따른 차체의 종진동 현상을 측정하고, 엔진-변속기-타이어-차체의 반환정계 4자유도 진동모델로 시뮬레이션을 수행하여 실차 주행실험의 결과치와 비교, 분석한 후 클러치 비틀림 특성을 비롯한 자동차 동력전달계의 각 설계인자들이 차체의 종진동에 어떠한 영향을 미치는가를 해석하고자 한다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권4호
• /
• pp.543-548
• /
• 2002

Fresh elephant grass was replaced by urea treated rice straw (UTRS) to evaluate the effects on milk production of crossed lactating cows. A total of 16 crossbred F1 cows (Holstein Friesian ${\times}$ Vietnamese Local Yellow), with a body weight of about 400 kg and lactation number from three to five, were used in the experiment. The experimental cows were blocked according to the milk yield of the previous eight weeks and divided into 4 homogenous groups. The experiment was conducted with a Latin Square design with 4 treatments and 4 periods. Each period was 4 weeks, with 2 weeks of feed adaptation and 2 weeks for data collection. The ratio of concentrate to roughage in the ration was 50:50. All cows were given constant amounts of elephant grass dry matter (DM), with ratios of 100% grass without UTRS (control treatment 100G), and 75% grass (75G), 50% grass (50G) and 25% grass (25G) with ad libitum UTRS. Daily total DM intake on 100G, 75G, 50G and 25G was 12.04, 12.31, 12.32 and 11.85 kg, and the daily ME intake was 121.6, 121.5, 119.4 and 114.3 MJ, respectively. The daily CP intake was similar for all treatments (1.85-1.91 kg). There was a difference (p<0.05) in daily milk yield between the 25G and the 100G and 75G (11.7 vs. 12.6 and 12.5 kg, respectively). Milk protein concentration was similar for all treatments, while a tendency to increased milk fat concentration following the increase of UTRS ratio was observed. The cows gained 4-5 kg body weight per month and showed first oestrus 3-4 months after calving. The overall feed conversion for milk production was not affected by ratio of UTRS in the ration. It is concluded that replacement of green grass by UTRS with a ratio of 50:50 for crossbred lactating cows is as good as feeding 100% green grass in terms of milk yield, body weight gain and feed conversion. UTRS can preferably replace green grass in daily rations for crossbred dairy cows in winter to cope with the shortage of green grass, with the ratio 1:1.