• Journal of Power System Engineering
• /
• v.5 no.2
• /
• pp.71-78
• /
• 2001

Using sodium hypophosphite as reducing agent, bath composition and plating condition of electroless copper plating on plating rate have been studied. The followings were determined as optimum, bath composition; $CuSO_4\;0.025M,\;NiSO_4\;0.002M,\;NaH_2PO_2\;0.4M$, sodium citrate 0.06M, $H_3BO_3$ 0.6M, thiourea or 2-MBT $0.2mg/{\ell}$, and operation conditions; pH $9{\sim}10$ at bath temperature rage of $60{\sim}70^{\circ}C$. A small amount of nickel ion($Ni^{2+}/Cu^{2+}$=0.002/0.025) to the hypophosphite reduced solution promotes autocatalysis and continuous plating. An additive such as thiourea or 2-MBT of a small amount($0.2mg/{\ell}$) can be used to stabilize the solution without changing plating rate much. The attivation energy between $20^{\circ}C\;and\;70^{\circ}C$ were calculated to be 11.3kcal/mol for deposition weight. Plating reaction had been ceased by the adjustment of pH above 13, temperature higher than $90^{\circ}C\;and\;under\;20^{\circ}C$. Deposited surface became worse in the case of increment of bath temperature above $80^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.40 no.4
• /
• pp.419-423
• /
• 2008

The present study examined the effects of different calcium (Ca) sources and concentrations on the growth and Ca absorption of Agrocybe cylindracea mycelia grown in submerged cultures. The dry weights of the mycelia were not significantly different (significance level of 5%) according to the type of Ca added, and increased with increasing Ca concentration until 500 mg/L, and then decreased at concentrations of 1000 mg/L or greater. The Ca contents of groups were significantly different according to the various concentrations of the Ca source, in which the Ca content of the control group cultured without added Ca was 198.3 mg/kg, and in the treatment groups, Ca content increased to a minimum of 273.7 mg/kg (1.4 times) and a maximum of 67246.0 mg/kg (339.1 times) the Ca contents of the groups generally increased with increasing Ca concentration. According to the number of culture days, growth rates were highest during days 8 through 12, and remained relatively high until day 16. In addition, Ca contents per unit dry weight were higher in young mycelia with a shorter culture period than in mature mycelia with a longer culture period. According to pH, the most active growth and highest Ca content occurred in MCM liquid medium at pH 7.0. In conclusion, in order to produce Agrocybe cylindracea mycelia with high Ca content, it is considered most efficient to culture them in MCM liquid medium without a pH adjustment and containing 1,000 mg/L of Ca-lactate, which is commonly used as a Ca additive in food, as well as to use mycelia between 12-16 days of culturing.

• Korean Journal of Food Science and Technology
• /
• v.24 no.4
• /
• pp.306-310
• /
• 1992

The effects of membrane type, temperature and pH on the permeate flux and removal of soluble solids from soybean curd whey by reverse osmosis were studied at recommended pressures for optimum performance of the membranes. The fluxes obtained with HR 95 and HR 98 membranes at 60 bar were not lower than that with CA 930 membrane at 20 bar. Soluble solid content in the permeate increased to 1.5 Brix after 90 min by CA 930 membrane, as opposed to 0 Brix with the HR 95 and HR 98 membranes. Permeate flux was increased by 28.4% as operation temperature increased from $30^{\circ}C$ to $50^{\circ}C$. COD of the whey was rejected up to 80.5%, 99.7% and 99.5% by using the membranes of CA 930, HR 95 and HR 98, respectively. pH adjustment of the whey resulted in decreasing membrane performance. But the rejection rate of COD in permeate with HR 98 membrane was slightly increased to 99.9% when the pH was adjusted to 7.0.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.5
• /
• pp.483-487
• /
• 2001

As a part of basic investigation for utilizing of cuttle bone as a calcium source, we examined on the extraction methods (calcining at $800^{\circ}C$ for 2 hrs, autoclaving at $121^{\circ}C$ for 10 hrs and ultrasonic treatments at $60^{\circ}C$ for 10 hrs) as a pretreatment methods for preparation of calcium-based powder from cuttle bone, The color of calcined calcium-based powder from cuttle bone was white, while that treated by other methods was light yellow. The calcium content in calcined calcium-based powder was $70.5\%$, and revealed high about 2 times compared to those pretreated by other methods. And, calcium solubility in calcined calcium-based powder was improved 22 times compared to raw cuttle bone powder, Among calcining, autoclaving and ultrasonic treatments as a pretreaoent methods for preparation of calcium-based powder from cuttle bone, calcining treatment was superior to other methods on the aspect of color, calcium solubility and purity of calcium-based powder, Judging from X-ray diffraction pattern of calcined calcium-based powder, most of calcium was present as a form of calcium oxide, But, pH of calcined calcium-based powder revealed strong alkali of pH 12.9. This pH value might invoke health risk in using food resource. Therefore, for utilization effectively calcined calcium-based powder from cuttle bone, it requires a suitable treatment such as adjustment of pH to neutral condition.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.1
• /
• pp.65-73
• /
• 2016

Korea Food and Drug Administration (KFDA) has officially announced 2,4-dinitrophenylhydrazine (DNPH) derivatization - high performance liquid chromatography (HPLC) methods for analysis of formaldehyde. This study was conducted to develop a convenient derivatization method for cosmetics by improving complex pre-treatment procedures included in KFDA method. To simplify pre-treatment procedures of KFDA method, reaction conditions including pH, time and temperature were optimized. This pre-treatment method does not require complicate pre-treatment steps of KFDA method such as pH adjustment of test solution with acetate buffer (pH 5.0), solvent-solvent partitioning with dichloromethane and concentrating procedure with vacuum evaporator. Formaldehyde-dinitrophenylhydrazone (formaldehyde-DNP) product produced by derivatization reaction was separated and quantified with a reversed-phase HPLC, which was slightly modified with KFDA method. The linearity test showed good results with 0.9999 of correlation coefficient ($r^2$) in the range of 2 ~ 40 ppm of standard solutions. In this method, limit of detection (LOD) and limit of quantitation (LOQ) values for formaldehyde were 0.2 ppm and 0.5 ppm, respectively. In addition, recovery test demonstrated that the method was also accurate and reproducible. Therefore, the proposed method can be applicable to rapid analysis of formaldehyde in cosmetics.

• Resources Recycling
• /
• v.32 no.3
• /
• pp.26-37
• /
• 2023

Good control of the solution pH and temperature is required to recover vanadium from the water leaching solution of vanadium ore after sodium roasting. However, such adjustments could lead to aluminum-vanadium and sodium-vanadium co-precipitation, which greatly affects the efficiency of vanadium recovery. In this study, a process that can increase the efficiency of vanadium recovery as ammonium metavanadate [NH₄VO₃] and ammonium polyvanadate [(NH₄)₂V₆O₁₆·H₂O] was investigated by examining the characteristics of vanadium-containing aqueous solutions during precipitation. The aluminum content of vanadium-containing water leaching solutions has a great effect on the loss of vanadium when the pH of the aqueous solution is adjusted to 9. Therefore, a process to minimize aluminum leaching is also required. In this study, ~99% or more of vanadium present in vanadium-containing aqueous solutions was precipitated and recovered as NH₄VO₃ by adding 3 equivalents of ammonium chloride relative to the vanadium content at pH 9 and room temperature. (NH₄)₂V₆O₁₆·H₂O was precipitated from the aluminum-vanadium coprecipitates generated during the pH-adjustment of the aqueous solutions to 9 by dissolving the coprecipitate in the solutions at pH 2.5 and controlling their sodium content to 2,000 mg/L or less. Approximately, 98% or more of the available (NH₄)₂V₆O₁₆·H₂O could be precipitated and recovered from a solution with a vanadium content of 2,200 mg/L and a sodium content of 1,875 mg/L at pH 2.5 by adding approximately 3 equivalents of ammonium chloride relative to the vanadium content at 95℃ or higher. The overall process could precipitate and recover, approximately 91% or more of the total vanadium in the water leaching solution as NH₄VO₃ and (NH₄)₂V₆O₁₆·H₂O.

• Journal of Veterinary Science
• /
• v.21 no.2
• /
• pp.27.1-27.10
• /
• 2020

The efficacies of a supraglottic airway device (SGAD) and an endotracheal tube (ETT) in cats under general anesthesia with volume-controlled ventilation (VCV) were compared. Thirty healthy cats were randomly allocated for airway control using either an SGAD or an ETT. Five tidal volumes (6, 8, 10, 12, and 14 mL/kg) were randomly tested, and respiratory rates were adjusted to achieve a minute ventilation of 100 mL/kg/min. The dose of propofol necessary to insert the SGAD or ETT, the static respiratory pressure, leakage during VCV, and end tidal CO₂ (ETCO₂) were recorded. Dosages of propofol and static respiratory measurements for the SGAD and ETT groups were compared using a t-test. The distribution of leakages and hypercapnia (ETCO₂ > 45 mmHg) were compared using Fisher's exact test. A significance level of p < 0.05 was established. No significant difference in dose of propofol was observed between the SGAD and ETT groups (7.1 ± 1.0, 7.3 ± 1.7 mg/kg; p = 0.55). Static resistance pressure of the SGAD (22.0 ± 8.1 cmH₂O/L/sec) was significantly lower than that of the ETT (36.6 ± 12.9 cmH₂O/L/sec; p < 0.01). Of the 75 trials, leakage was more frequent when using an SGAD (8 events) than when using an ETT (1 event; p = 0.03). Hypercapnia occurred more frequently with SGAD (18 events) than with ETT (3 events; p < 0.01). Although intubation with an ETT is the gold standard in small animal anesthesia, the use of an SGAD can reduce airway resistance and the work of breathing. Nonetheless, SGAD had more dead space and the tidal volume for VCV needs adjustment.

• Microbiology and Biotechnology Letters
• /
• v.26 no.3
• /
• pp.200-205
• /
• 1998

A probiotic-strain of Lactobacillus sp. was cultured in bovine blood plasma-based (BBPB) medium and freeze-dried to prepare a probiotic product as an animal feed additive. The cell mass produced in the medium, $5.2{\times}10^9$ CFU/ml, was high enough to be commercialized and was 74% of that in MRS medium. The survival rate of tactobacillus sp. against freeze-drying was affected by the conditions for treatment of cultured BBPB broth before freeze-drying such as pH adjustment, volume reduction and freezing rate. It was also found that the blood protein hydrolysate remaining in broth also enhanced the survival rate. Among various protective substances, sucrose showed a high stabilizing effect with 10% (w/v) addition, by which the maximum survival rate (48.3%) and viable cell count ($3.0{\times}10^{10}$ CFU/g) were obtained.

• The Korean Journal of Mycology
• /
• v.18 no.2
• /
• pp.77-83
• /
• 1990

Factors influencing the fusion frequency of protoplasts were investigated with auxotrophic mutants of Pleurotus florida and Pleurotus ostreatus. Immediately after the polyethylene glycol (PEG) solution was added, the protoplasts adhered firmly and shrank. During the subsequent dilution with 0.6 M sucrose, the protoplasts regained their normal size and larger bodies were observed. Interspecific heterokaryons were obtained by fusion of the nutritionally complementing protoplasts. Hyphae of the heterokaryotic fusants formed true clamp connections. The optimum conditions were a total of 1 to 15 million protoplasts per ml, 30% polyethylene glycol 8000 solution with adjustment to pH 8.0 and 0.6 M sucrose stabilized regeneration medium. Other parameters such as $CA^{++}$, glycine, exposure time and temperature influenced mainly the viability of the protoplasts.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.1
• /
• pp.21-29
• /
• 2013

Present study was conducted to evaluate the performance of Anaerobic Hybrid Reactor (AHR) combined with two types of anaerobic attached growth reactors at mesophilic temperature ($37^{\circ}C$). The reactor was operated at the influent substrate condition of 19,400 mg/L soluble chemical oxygen demand (sCOD). The organic loading rate (OLR) and flow rate were varied in the range of $9.5{\sim}22.5kg/m^3$. day and 10.6 ~ 26.0 L/day respectively since start-up was done. The COD removal efficiency of 93 % was measured at the OLR of $14kg/m^3$. day in AHR. However a reduction in removal efficiency to as low as 85 % could have been related to a combined effect of high concentration suspended solids (SS) concentration over 3,800 mg/L. On the other hand the total COD removal efficiencies were measured to be 96.3 % and 96.2 % for AHR+APF and AHR+ADF respectively. The pH of the POME was adjusted to neutral range by using sodium bicarbonate at the initial stages of the reactor feed, later stages pH adjustment was not required as the pH was maintained in the desired neutral range due to self-buffering capacity of the reactor. The reactor proved to be economically acceptable and operationally stable. The biogas was measured to have $CH_4$ and $CO_2$ with a ratio of 35:65, and methane gas production rate was estimated to be $0.17{\sim}10.269L\;CH_4/g\;COD_{removed}$.