• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.4
• /
• pp.289-302
• /
• 2023

The study area was Gangnim-myeon, Hoengseong-gun, Gangwon-do, composed of the Chiaksan gneiss complex, and it was revealed that the concentrations of uranium (U) and thorium (Th) within the groundwater of the study area exceeded their water quality standards. Hence, artificial weathering experiments were conducted to elucidate mineralogically the mechanisms of their leaching using drilling cores obtained from the corresponding groundwater aquifers. First of all, the mineralogical compositions of core samples were observed, and the results indicated that the content of clinochlore, a member of the chlorite group of minerals that can form through low- and intermediate-temperature metamorphisms, was relatively higher. In addition, the Th concentration was measured ten times higher than that of U. The results of artificial weathering experiments suggested that the Th concentrations gradually increased through the dissolution of radioactive-element-bearing minerals up to the first day, and then they tended to decrease. It could be attributed to the fact that Th was leached with the dissolution of thorite, which might be a secondary mineral, and then dissolved Th was re-precipitated as the various forms of salt, such as sulfate. Even though the U content was lower than that of Th in the core samples, the U concentration was one hundred times higher than that of Th after the weathering experiments. It is likely caused by the gradual dissolution and desorption of U included in intensively weathered thorite or adsorbed as a form of UO₂²⁺ on the mineral surface. In addition, the leaching tendency of U and Th was positively correlated with the bicarbonate concentration. However, the concentrations between U and Th in groundwater exhibited a relatively lower correlation, which might result from the fact that they occurred from different sources, as aforementioned. Among various kinetic models, the parabolic diffusion and pseudo-second-order kinetic models were confirmed to best fit the dissolution kinetics of both elements. The period that would be taken for the U concentration to exceed its drinking-water standard was inferred using the regressed parameters of the best-fitted models, and the duration of 29.4 years was predicted in the neutral-pH aquifers with relatively higher concentrations of HCO₃, indicating that U could be relatively quickly leached out into groundwater.

• Korean Journal of Food Science and Technology
• /
• v.14 no.4
• /
• pp.291-300
• /
• 1982

In order to develop effective and simple sanitation method for the extention of shelf-life of fresh poultry meat, the effect of sanitizers, sanitation methods and packaging materials on the extention of shelf-life of poultry meats was observed at the $4^{\circ}C$ and room temp$(10{\sim}20^{\circ}C)$. The results are summarized as follows: 1. The autochonous skin microflora of poultry, before processing, were believed to be removed or killed during the scalding and plucking, and exposed dermal tissue was contaminated by microorganisms from the subsequent stages of processing. 2. In the final stage of poultry processing, total viable counts of microorganisms and coliforms were averaged to $3.5{\times}10^4/cm^2$ and $400/cm^2$, respectively. 3. The refrigerated shelf-life of fresh whole poultry carcasses at $3\;to\;4^{\circ}C$ was extended to 7 to 16 days compared to control with the various treatments of some sanitizers by dipping freshly chilled carcasses for 5 min or spraying 1 liter of sanitizers per carcasses. In the case of storage at $10\;to\;15^{\circ}C$, the shelf-life of poultry carcasses was extended to one to two days by the sanitation treatments compared to control. 4. Spraying sanitation was more effective than dipping sanitation, and 5 minutes dipping and one liter spraying per carcass were enough for effective sanitation of poultry carcasses in most sanitizers. 5. The packaging with an oxygen impermeable polyvinylidene chloride extended the shelf-life to 10 days and 5 days with polyethylene compared to control. When poultry carcasses were sanitized by continuous spraying with one liter of 30 ppm of chlorine and another one liter of 5% of potassium sorbate, packaged with polyvinylidene chlorlde were extended to about 30 days compared to control.

• Journal of Global Scholars of Marketing Science
• /
• v.18 no.3
• /
• pp.115-132
• /
• 2008

Metal industry is one of the most representative heavy industries and the median sales volume of steel and nonferrous metal companies is over one billion dollars in the case America [Forbes 2006]. As seen in the recent business market situation, an increasing number of industrial manufacturers and suppliers are moving from adversarial to cooperative exchange attitudes that support the long-term relationships with their customers. This article presents the results of an empirical study of the antecedent factors of business relationships in metal industry of the United States. Commitment has been reviewed as a significant and critical variable in research on inter-organizational relationships (Hong et al. 2007, Kim et al. 2007). The future stability of any buyer-seller relationship depends upon the commitment made by the interactants to their relationship. Commitment, according to Dwyer et al. [1987], refers to "an implicit or explicit pledge of relational continuity between exchange partners" and they consider commitment to be the most advanced phase of buyer-seller exchange relationship. Bonds are made because the members need their partners in order to do something and this integration on a task basis can be either symbiotic or cooperative (Svensson 2008). To the extent that members seek the same or mutually supporting ends, there will be strong bonds among them. In other words, the principle that affects the strength of bonds is 'economy of decision making' [Turner 1970]. These bonds provide an important idea to study the causes of business long-term relationships in a sense that organizations can be mutually bonded by a common interest in the economic matters. Recently, the framework of structural bonding has been used to study the buyer-seller relationships in industrial marketing [Han and Sung 2008, Williams et al. 1998, Wilson 1995] in that this structural bonding is a crucial part of the theoretical justification for distinguishing discrete transactions from ongoing long-term relationships. The major antecedent factors of buyer commitment such as technology, CLalt, transaction-specific assets, and importance were identified and explored from the perspective of structural bonding. Research hypotheses were developed and tested by using survey data from the middle managers in the metal industry. H1: Level of technology of the relationship partner is positively related to the level of structural bonding between the buyer and the seller. H2: Comparison level of alternatives is negatively related to the level of structural bonding between the buyer and the seller. H3: Amount of the transaction-specific assets is positively related to the level of structural bonding between the buyer and the seller. H4: Importance of the relationship partner is positively related to the level of structural bonding between the buyer and the seller. H5: Level of structural bonding is positively related to the level of commitment to the relationship. To examine the major antecedent factors of industrial buyer's structural bonding and long-term relationship, questionnaire was prepared, mailed out to the sample of 400 purchasing managers of the US metal industry (SIC codes 33 and 34). After a follow-up request, 139 informants returnedthe questionnaires, resulting in a response rate of 35 percent. 134 responses were used in the final analysis after dropping 5 incomplete questionnaires. All measures were analyzed for reliability and validity following the guidelines offered by Churchill [1979] and Anderson and Gerbing [1988]., the results of fitting the model to the data indicated that the hypothesized model provides a good fit to the data. Goodness-of-fit index (GFI = 0.94) and other indices ( chi-square = 78.02 with p-value = 0.13, Adjusted GFI = 0.90, Normed Fit Index = 0.92) indicated that a major proportion of variances and covariances in the data was accounted for by the model as a whole, and all the parameter estimates showed statistical significance as evidenced by large t-values. All the factor loadings were significantly different from zero. On these grounds we judged the hypothesized model to be a reasonable representation of the data. The results from the present study suggest several implications for buyer-seller relationships. Theoretically, we attempted to conceptualize the antecedent factors of buyer-seller long-term relationships from the perspective of structural bondingin metal industry. The four underlying determinants (i.e. technology, CLalt, transaction-specific assets, and importance) of structural bonding are very critical variables of buyer-seller long-term business relationships. Our model of structural bonding makes an attempt to systematically examine the relationship between the antecedent factors of structural bonding and long-term commitment. Managerially, this research provides industrial purchasing managers with a good framework to assess the interaction processes with their partners and, ability to position their business relationships from the perspective of structural bonding. In other words, based on those underlying variables, industrial purchasing managers can determine the strength of the company's relationships with the key suppliers and its state of preparation to be a successful partner with those suppliers. Both the supplying and customer companies can also benefit by using the concept of 'structural bonding' and evaluating their relationships with key business partners from the structural point of view. In general, the results indicate that structural bonding gives a critical impact on the level of relationship commitment. Managerial implications and limitations of the study are also discussed.

• Journal of the Korean Geographical Society
• /
• v.30 no.1
• /
• pp.1-13
• /
• 1995

One of the oldest fossil of conifers and taxads in the Korean peninsula includes Elatocladus, Ullmannia, Walchia and dates back to the Permian period of the Palaeozoic era. The only conifer which successfully survived since the Cretaceous period is Pinus and still thrives in Korea. The extinction of Miocene conifers, such as Sciadopitys, Taxodiaceae, Metasequoia and Cryptomeria may due to the climatic deteriorations during the late Pleistocene period. However, the cryophilous conifers and taxads, e.g..Pinus, Juniperus, Abies, Picea, Cupressaceae, Larix and Taxus continued to exist from the Miocene to the late Pleistocene and became major vegetational elements in the mountainous areas of Korea. As the temperature ameliorates in the late Holocene period, thermophilous Pinus (Diploxylon) gradually had increased in numbers and became a dominant vegetation in the lowland and montane areas since 2,000 years B.P. in korea. Out of various Korean conifers and taxads, Pinus which surviving since the Cretaceous period of Mesozoic era, ranges spatially from southern coastal area to northern alpine belt of the Korean peninsula. Pinus which contains largest species number in conifers is one of the most well-adapted genus to the Korean environment. The next important conifer Juniperus dates back to the Miocene period of Cenozoic era and continuously maintains speciation and expansion of distributional range. Other major conifers and taxads of Korea include Picea, Abies, Lorix and Taxus. The restriction of distributional range of Cephralotaxus and Tsuga may due to the climatic deterioration during the Pleistocene period of Cenozoic era. The patterns of the temporal and spatial distribution of Korean conifers and taxads may provide invaluable informations for the better understanding of present-day distributional range and ecology.

• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.2
• /
• pp.159-165
• /
• 2013

Purpose: Abdominal compressor is used to control breathing in stereotactic body radiotherapy for lung tumors frequently. We evaluated the dynamic variation aspect of internal tumor volume by breathing. Materials and Methods: We reviewed 20 lung cancer patients (7 upper lung patients, 4 middle lung patients, 9 lower lung patients) who received stereotactic body radiotherapy using abdominal compressor between April 2012 to April 2013. Coordinate shift values were obtained by using four-dimensional cone-beam CT (4D-CBCT) to investigate treatment set-up error and moving tumor position error. To investigate how much difference of each part, we compared 95% confidence interval, maximum values and minimum values of three-dimensional vector value and analyzed conformity degree through the Pearson square correlation coefficient. Results: 95% confidence interval of three-dimensional vector value of each part is 1.8~2.9 mm in upper lobe, 2.3~5.4 mm in middle lobe and 2.2~4.0 mm in lower lobe. Conformity degree was the result that respectively is LR direction 0.75, SI direction 0.68 and AP direction 0.63 in upper lobe, LR direction 0.82, SI direction 0.51 and AP direction 0.92 in middle lobe and LR direction 0.63, SI direction 0.50 and AP direction 0.34 in lower lobe. Conclusion: We showed difference by each site in lung tumor due to respiration by using abdominal compressor. Therefore, we must correct treatment set-up error as well as moving tumor position error by breathing. It is also considered to be useful that it is the use of 4D-CBCT when correcting the error due to various dynamic variation.

• Journal of Technologic Dentistry
• /
• v.31 no.1
• /
• pp.37-54
• /
• 2009

The purpose of this thesis is to address the imbalance between supply and demand of dental lab technicians and to propose its solutions by analyzing the improvement of employment rate of graduates of dental technology schools in Daegu area and the supply and demand of the technician workforce. Preliminary and full-scale surveys were performed from Aug. 10 to Oct. 10 in 2008 on 150 junior students of dental technology schools who finished their on-the-job-training and 150 dental technicians who were working for dental laboratory in Daegu by self-assessment questionnaire. Followings are the findings of this study. First, regarding the gender of the dental technicians, 32.7% of respondents were female 67.3% were male. Concerning age, respondents younger than 29 years-old occupied the highest percentage(39.3%). With respect to the lab technology school they graduated, DaeguHealthCollege took the largest proportion of 87.3%. With regard to interpersonal relationship at the school, 58.0% of respondents felt their relationship 'smooth'. Second, about the motive of choosing to be a lab technician, the biggest proportion of the respondents(34.7%) replied that 'because it is professional'. Regarding the degree of satisfaction about the profession, 'so-so' was the answer with the biggest percentage(51.3%) followed by 'satisfied'(32.0%) and 'unsatisfied'(16.7%). It showed that respondents were generally satisfied with their major. Third, regarding relevance of on-the-job-training with 'preparation for the employment', highest percentage of both students and lab technicians(50.0%) replied 'so-so'. With respect to 'necessity of practical education', highest percentage of the students and lab technicians replied 'relating didactic education in college to the real world' with 52.7% and 40.7% respectively. With regard to 'the aim of on-the-sport-training', 'practical training of didactic education' was chosen by 54.0% and 47.3% respectively. Fourth, with regard to the 'types of college education advantageous for the employment', both students and lab technicians groups chose 'practical training' with the highest percentage. Concerning 'helpfulness of clinical training on employment', students answered 'so-so' and 'helpful' by 50.0% and 42.7% respectively and dental technicians replied similarly by 50.0% and 46.0% respectively. Fifth, with regard to the influence of financial factors on the supply and demand of dental technician(question #1), 68.0% of respondents agreed that 'salary plays key role in the supply and demand of the work force'. Concerning the question about working condition, respondents requested better working environment. With reference to interpersonal relationship at the laboratory, respondents replied that interpersonal relationship affects the duration of the employment it was found out that there were many conflicts with colleagues or dental office. Sixth, regarding the satisfaction about their profession according to the characteristics of the respondents more respondents were 'satisfied'(10.30 points) with their profession and 'unsatisfied' were 9.47 points and the difference was statistically significant(p<0.05). According to the findings of this study, practical education on campus and on-the-job-training are as important as didactic education at class due to the characteristics of dental technology major. It was found that more practical training is related to higher employment rate. Therefore, efficiency of on-the-job-training by college education should be increased raise employment rate of the graduates and reduce the unemployment. Up-to-date information needs to be promptly delivered and future vision should be presented to the students to raise their satisfaction about the profession. In addition, to reduce dental technician's frequent change of their workplace after facing with the reality of the profession after graduation, related organizations should make an effort to present better future than now.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6D
• /
• pp.679-686
• /
• 2012

KTX step 1 April 2004, after the opening, the second phase of the project was opened in November 2010. High-speed rail after the opening and continue to increase the demand of high-speed rail, Have the speed of competitive advantage compared too the means of transportation. The opening of these high-speed rail has led to changes of the move, the company's position, and the spatial structure of the population of reorganization, such as the social, economic, transportation. In this study, survey data using the High Speed Rail Station EMME/2 of the program to take advantage of the 2-Dimentional Blancing trip distribution to investigate the passage through the trip distribution by the estimation of the parameters of the model to estimate the distribution of the means of access and high-speed rail station to reproduce and Analysis of the results by means of access parameters (${\theta}$) autos 0.0395, buses 0.0390, subway 0.0650, taxi 0.0415, the frequency distribution (Trip Length Frequency Distribution: TLFD) were analyzed survey data value model with the results of comparing $R^2$ cars analysis and model values similar survey data 0.909 bus 0.923, subway 0.745 to 0.922, taxi, F test P value analysis is smaller than 0.05 at the 95% confidence level as a note that was judged to have been. Trip frequency distribution analysis, but in the future, set the unit to 5km-trip frequency distribution middle zone Units from small zone units (administrative district) segmentation research is needed, and can reflect the trip distance 0~5 km interval combined function to take advantage of the gravity model and the 3-Dimentional Blancing applied research is needed to be considered.

• Economic and Environmental Geology
• /
• v.22 no.4
• /
• pp.327-339
• /
• 1989

Cassiterite, tantalite, columbite and tantalian rutile are found as accessory minerals in Soonkyoung tin-bearing pegmatites. These minerals occur as finely disseminated specks of up to micro-size in diameter and coarse grain size varying from 0.5-50mm in albite, muscovite and quartz assemblage. Cassiterite geneally shows a moderate to intense pleochroism, having a color brownish yellow to deep reddish brown. The substitution of $Ta^{+5}$, $Nb^{+5}$, $Ti^{+4}$ and Fe* for $Sn^{+4}$ in cassiterite ranges 0.01-0.10 mol%. The zoned cassiterite give a higher Ta/Nb ratios in margin than the ratios in core. This is due to the preferential $Ta^{+5}$ affinity to lower temperature during the crystallization of cassiterite. Tantalite-columbite and tantalian rutile occur in cassitertie with exsolution texture and/or infiltrate into the micro-fissures of cassiterite with micro quartz vein. The compositions of tantalite-columbite show the wide ranges of $Ta_2O_5$ : 14-46 wt.%, $Nb_2O_5$ : 60-28 wt. % and FeO*: 10.15 wt.%. The variation of chemical composition in tantalit-columbite exhibits the decreasing trends of $Mn^{+2}/M^{+2}+Fe^*$ with $Ta^{+5}/Ta^{+5}+Nb^{+5}$ increasing. These trends of vatiations indicate that the Ta/Nb fractionation are enhanced by higher Ta-complex activity in late stage of pegmatite consolidation and lower activity of F in agreements with the F-and Li-micas not to be developed in Soonkyoung tin-bearing pegmatite.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.1
• /
• pp.1-10
• /
• 2002

The present study is focused on the granite weathering and soil formation, and the heavy metal contamination in soils in the Onsan industrial area. For profile study, soil sampling was conducted on each depth and experimental analyses have been conducted on those samples. X-ray diffraction analyses show that clay minerals consist mainly of kaolin minerals, vermiculite, and minor illite. Most of kaolin minerals in the lower kiwi of the profile consist of halloysite as confirmed by formamide intercalation, but the content of halloysite decreases gradually toward the surface since it has been transformed to kaolinite in the upper part of the profile. Thermal treatment by heating at $110^{\circ}C,\;300^{\circ}C,\;and\;550^{\circ}C$ shows a diffuse and broad peak the between 10 and $14\;{\AA}$ region in X-ray diffractograms. This suggests the possible existence of the hydroxy-Al interlayerecl vermiculite. Na-citrate extraction method reaconfirms this result showing transition of $14\;{\AA}$ peak to $10\;{\AA}$ In by removing the interlayer materials and restoring the vermiculite to its original state. The occurrence of hydroxy-Al interlayered vermiculite is also supported by soil pH distribution room 3.9 In the lower part to 3.6 in the upper part of the profile. Sequential extraction experiment was conducted to investigate the states of heavy metals in soils. The experiment shows that relatively high amounts of heavy metals are concentrated in the upper part of the profile and that most of them are bound to Fe/Mn oxides and organic matters while less concentration in clay minerals. The result indicates that most of heavy metal pollutants are concentrated in the surface soil and that the low concentrations of heavy metals in clays are mainly due to the low adsorption capacities of clay minerals such as kaolin minerals and hydroxy-Al interlayered vermiculite in acidified soil condition.

• The Journal of Korean Physical Therapy
• /
• v.9 no.1
• /
• pp.1-18
• /
• 1997

The purpose of this study is to investigate the effects of the low power Helium Neon-Infra Red(HeNe-IR) laser and the special electromagnetic therapeutic apparatus stimulation, which is usually designated as TDP by using the initial of Tending Diancibo Pu which is the Chinese inscribed with English, on wound healing in rat. The seventy-five Sprague-Dawley adult female and male rats were assigned to the experimental and control groups. Each rat was anesthetized with pentobarbital sodium, and three full-thickness incisions with 12mm length wert made on the back of the half cf the rats and three deep second degree burns were made on the back of the remainder of the rats. From 34 hours after being injured, the rats of the experimental laser group were irradiated with the 157mW electric power HeNe-IR laser for 2 minutes every day and the rats of the experimental TDP group were stimulated with TDP irradiation with the 4km spot distance for 20 minutes every day during the 17 days. The rats were sacrificed and the wound parts of its were incised on the first day, 4th day, 7th day, 10th day and 17th day respectively after the beginning of wound treatment with laser and TDP irradiation. The incised wound parts were processed appropriately for the light microscopic and electron microscopic examination. The length of incised wound was measured with microcaliper before the wound part was incised. There was a significant decrease in the length of the incised wound of the experimental laser and TDP group, compared with that of control group at 4th day, 7th day and 10th day(p<0.01) after surgery. Through the histological examination of the wound site, the more rapid epithelialization and collagen formation in experimental groups were showed, compared with control group. The histological results were analyzed and summarized as the follows; The epidermis begins to be regenerated and the granulation tissue begins to be changed to the mature pattern in the H-E stained incised skin of the laser and TDP treatment group on the 4th day. The epidermis shows the complete regeneration and the granulation tissue in the dermis in mostly to be matured in the laser and TDP treatment group on the 7th day, compared with control group. The chronic inflammatory cells are oberved and the necrosis of the collagen fibers are partially observed in control group on the 10th day. The dermis of the laser and TOP treatment group reveals relatively compactly arranged collgen bundles with the mature collagen fibers on the 10th day. The epidermis and dennis of the laser and TDP group are repaired normally and the hair follicles are well regenerated on the 17th day. The mild edema and the granulation tissue is observed in the dermis of the control groups and the delayed treatment process is observed on the 17th day. The Most of proliferated collagen fibrils are found to be compact and regular in electron micrograph of burn skin of the laser treatment group on the 10th day hut the interstitial eadema and some inflammatory cells are found in the control group. The above results suggest that through the visual and histological examination the epithelized epithelium and the proliferation of the collagen liters in the dermis occur very effectively with the low power laser treatment and the TDP treatment in the incised wound healing and the burn wound healing.