• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.253-260
• /
• 2000

Pile foundations have been widely used in civil engineering construction for many years. Structures subjected to large lateral loads usually have pile foundations as shallow foundations cannot sometimes support the moments on these structure. The purpose of this paper is to propose the p - multiplier factor (P$\sub$M/) based on the characteristics of behavior of laterally loaded group pile in homogeneous sand. For this, a series of model tests are performed and the composite analytical method proposed by author is used to the propose P$\sub$M/. Based on the model test results of the large number of laterally loaded group piles, p - multiplier factors for homogeneous sand are proposed by back analysis under various condition of soil density, spacing-to-diameter ratio of pile, number of pile, and spacing-to-diameter of pile. P - multiplier approach provides a simple but sufficient tool for characterizing the shadowing group effects of laterally loaded group pile.

• 호남수학학술지
• /
• 제35권3호
• /
• pp.435-443
• /
• 2013

We give an $L^p$ Fourier multiplier condition which implies the H$\ddot{o}$rmander-Mikhlin multiplier theorem.

• 정보보호학회논문지
• /
• 제18권3호
• /
• pp.45-50
• /
• 2008

유한체 연산기는 생성 기약다항식과 원소의 표현 방법에 따라 효율성에 많은 영향을 받는다. 본 논문에서는 홀수 소수 p에 대한 확장체 GF$(p^n)$ 위의 곱셈에 대한 두 가지 직렬곱셈기를 제안한다. 기약 이항 다항식을 이용한 직렬 곱셈기는 (2n+5)개의 레지스터, 2개의 MUX, 2개의 GF(p)곱셈기, 1개의 GF(p) 덧셈기를 사용하여 $n^2+n$ 클럭 싸이클 이후에 곱셈 결과를 얻는 구조이다. 기약 AOP를 이용한 직렬 곱셈기는 (2n+5)개의 레지스터, 1개의 MUX, 1개의 GF(p)곱셈기, 1개의 GF(p) 덧셈기를 사용하여 $n^2$+3n+2 클럭 싸이클 이후에 곱셈결과를 얻는다.

• East Asian mathematical journal
• /
• 제16권2호
• /
• pp.225-231
• /
• 2000

The purpose of the present paper is to introduce a new class $\mathcal{P}_{n,p}(\alpha)$ of analytic functions defined by a multiplier transformation and to investigate some properties for the class $\mathcal{P}_{n,p}(\alpha)$.Furthermore, we consider an integral of functions belonging to the class $\mathcal{P}_{n,p}(\alpha)$.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.877-883
• /
• 2009

Shaking table tests are performed to evaluate the dynamic group pile effect in fine sand. Single pile tests and $2{\times}4$ group pile tests are performed on 3D pile spacing. Dynamic p-y backbone curves are obtained to evaluate dynamic group pile effect by using dynamic p-y curve of single pile. And dynamic group pile p-multiplier is estimated by dynamic p-y backbone curve. Dynamic p-multiplier can be calculated by using subground reaction ratio of dynamic p-y backbone curve which is the same displacement of p-y curve peak point As the result, dynamic group pile effects are evaluated in terms of a shaking frequency, a shaking acceleration, and a relative density. Dynamic group pile p-multiplier is the largest at lead pile, and the value decrease at middle pile and trail pile. p multiplier increases as increasing input acceleration and decreasing relative density. This results coincide with NCHRP's research which suggest p multiplier increases as increasing pile cap displacement.

• 대한수학회논문집
• /
• 제35권4호
• /
• pp.1159-1170
• /
• 2020

We consider the weighted spaces ℓ^p(𝕊, 𝜑) and ℓ^p(𝕊, 𝜓) for 1 < p < +∞, where 𝜑 and 𝜓 are weights on 𝕊 (= ℕ or ℤ). We obtain a sufficient condition for ℓ^p(𝕊, 𝜓) to be multiplier weighted-space of ℓ^p(𝕊, 𝜑) and ℓ^p(𝕊, 𝜓). Our condition characterizes the last multiplier weighted-space in the case where 𝕊 = ℤ. As a consequence, in the particular case where 𝜓 = 𝜑, the weighted space ℓ^p(ℤ,𝜓) is a convolutive algebra.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.244-247
• /
• 1999

In this paper, a low voltage CMOS analog four-quadrant multiplier is presented. The proposed multiplier is composed of a pair of transconductor and lowers supply voltage down to $V_{T}$+2 $V_{Ds,sat}$+ $V_{DS,triode}$. The designed analog four-quadrant multiplier have simulated by HSPICE using 0.25${\mu}{\textrm}{m}$ n-well CMOS process with a 1.2V supply voltage. Simulation results show that the THD can be 1.28% at maximum differential input of 0.7 $V_{p-p}$././.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.47-50
• /
• 2004

In this paper, we implement an Elliptic Curve Cryptosystem(ECC) processor for DTCP. Because DTCP(Digital Transmission Content Protection) uses GF(p), where p is a 160-bit prime integer, we design a scalar multiplier based on GF(p). The scalar multiplier consists of a modular multiplier and an adder. The multiplier uses montgomery algorithm which is implemented with CSA(Carry-save Adder) and CLA(Carry-lookahead Adder). Our new scalar multiplier has been synthesized using Samsung 0.18 um CMOS technology and the maximum operation frequency is estimated 98 MHz, with the size about 65,000 gates. The resulting performance is 29.6 kbps, that is, it takes 5.4 msec to process a 160-bit data frame. We assure that this performance is enough to be used for digital signature, encryption/decryption, and key exchanges in real time environments.

• 전자공학회논문지B
• /
• 제31B권3호
• /
• pp.60-68
• /
• 1994

In this paper, the multiplicative algorithm of two polynomials over finite field GF(($p^{m}$) is presented. Using the presented algorithm, the multiple-valued multiplier of the serial input-output modular structure by CCD is constructed. This multiple-valued multiplier on CCD is consisted of three operation units: the multiplicative operation unit, the modular operation unit, and the primitive irreducible polynomial operation unit. The multiplicative operation unit and the primitive irreducible operation unit are composed of the overflow gate, the inhibit gate and mod(p) adder on CCD. The modular operation unit is constructed by two mod(p) adders which are composed of the addition gate, overflow gate and the inhibit gate on CCD. The multiple-valued multiplier on CCD presented here, is simple and regular for wire routing and possesses the property of modularity. Also. it is expansible for the multiplication of two elements on finite field increasing the degree mand suitable for VLSI implementation.

• 대한토목학회논문집
• /
• 제38권4호
• /
• pp.567-578
• /
• 2018

본 연구는 기존에 동적하중에 의한 군말뚝의 응력감소효과를 알아보기 위하여 동적 p-y곡선을 수립하고, 이를 통하여 동적 p-승수를 산정하고자 하였다. 이를 위하여 건조 사질토 지반에서 $2{\times}2$ 군말뚝, 단말뚝 및 $5{\times}5$ 군말뚝, 단말뚝에 대해 말뚝-지반시스템 하부에 정현파를 입력, 동적 수치해석을 수행하였다. 이때 군말뚝의 경우, 말뚝의 중심간격을 말뚝 지름의 2.5배, 5.0배로 변화시켜 해석을 실시하였다. 동적 수치해석결과에 따라 단말뚝과 군말뚝의 동적 p-y 곡선을 작성 및 비교를 하여, 말뚝 중심 간격 및 군말뚝 말뚝의 열위치에 따른 말뚝의 동적 군말뚝 효과를 분석하였다. 해석 결과 동적 p-승수 값은 좌표원점을 기준으로 대칭성을 보였으며, 그 값은 $5{\times}5$ 군말뚝(말뚝간격=2.5D), 단말뚝의 경우 군말뚝의 말뚝번호 3, 말뚝번호 23에서 0.26 ~ 0.30, 말뚝번호 13에서 0.14, 말뚝번호 8, 말뚝번호 18에서 0.07 ~ 0.14로 나타났다. 이 값들은 특히 하중조건이 달라서 정적 p-승수와 차이를 보였으며, 향후 다양한 종류의 입력 동하중을 통한 동적 p-승수($P_{dm}$) 산정을 통해 토목기초 구조물의 군말뚝-지반 시스템의 동적설계나 해석에 이용하는 것이 바람직하다고 판단된다.