• Journal of the Korean Wood Science and Technology
• /
• 제25권4호
• /
• pp.68-74
• /
• 1997

This research was studied dissolving pulp for rayon production, which is not KP, SP methods but steam explosion and oxygen alkali treatment. The variation of characterization in wood cellulose after steam explosion and oxygen alkali treatment this follows. In the oxygen alkali treatment of exploded pine wood, yield of dissolving pulp was lower than steam-exploded oak wood, and we have obtained dissolving pulp that high purity cellulose, but degree of polymerization was inclined to decrease less than 200. In the case of steam-exploded oak wood, degree of polymerization was higher than steam-exploded pine wood but purity of cellulose was lower than its.

• 펄프종이기술
• /
• 제33권3호
• /
• pp.75-83
• /
• 2001

The potential of oxygen delignification is a powerful tool to reduce detrimental environmental effects. This study was performed to investigate the effect of steam explosion treatment of chemically treated oak wood on oxygen-alkali pulping. Pulp yield during steam explosion treatment by ${Na_2}{O_3}$-NaOH impregnation was higher than the other impregnation chemicals. Also, NaOH extraction at room temperature after steam explosion treatment improved the kappa number from 140~116 to 90~64. Oxygen-alkali pulping of chemical steam explosion treated woods affected to pulp yields. ${Na_2}{O_3}$-NaOH impregnation was very effective to higher carbohydrate yields at same delignification level. Its carbohydrate yield seemed to be highly related to the effluent pH. Oxygen-alkali pulping after steam explosion treatment of ${Na_2}{O_3}$-NaOH impregnated wood was shown that carbohydrate yield was very high because its effluent pH was increase from natural to mild alkali. Even if oxygen bleaching limit the delignification to 50% in order to avoid unacceptable yield and viscosity losses, oxygen-alkali pulping after steam explosion by ${Na_2}{O_3}$-NaOH impregnation was possible to extend the delignification more than 80%. Considering high pulp yield with lower lignin content from steam explosion treated wood, it might be profitable to end the cook at a high kappa number instead of a low kappa number, and continuously apply the oxygen delignification, in order to better quality pulp.

• Journal of the Korean Wood Science and Technology
• /
• 제18권4호
• /
• pp.18-25
• /
• 1990

As polysaccharides in lignocellulosic materials are encrusted with aromatic lignin molecules and have high crystallinity, these require pretreatment to improve their digestability by cellulolytic enzymes. Though a number of pretreatment methods have been proposed, the steam explosion process is evaluated as a promising method. This study was performed to investigate the effect of delignification treatment by alkali, methanol and the others on the enzymatic hydrolysis. Delignification treatment resulted in great increase rate in enzymatic hydrolysis. Concerning to the effect of delignication reagents on the enzymatic hydrolysis, methanol treatment was more effective than alkali in the case of oak wood. In pine wood, the delignification did not showed any significant enhancement of hydrolysis rate. Complete delignification by Alkali-Oxygen. Alkali treatment showed high saccharification rate of 99.5%.

• 한국표면공학회지
• /
• 제45권1호
• /
• pp.8-14
• /
• 2012

The effects of the alkali surface modification process on the adhesion strength between electroless-plated Cu and polyimide films were investigated. The polyimide surfaces were effectively modified by alkali surface treatments from the hydrophobic to the hydrophilic states, and it was confirmed by the results of the contact angle measurement. The surface roughness increased by alkali surface treatments and the adhesion strength was proportional to the surface roughness. The adhesion strength of Cu/polyimide interface treated by KOH + EDA (Ethylenediamine) was 874 gf/cm which is better than that treated by KOH and KOH + $KMnO_4$. The results of XPS spectra revealed that the alkali treatment formed oxygen functional groups such as carboxyl and amide groups on the polyimide films which is closely related to the interfacial bonding mechanism between electroless-plated Cu and polyimide films. It could be suggested that the species and contents of functional group on polyimide films, surface roughness and contact angle were related with the adhesion strength of Cu/polyimide in combination.

• 한국수소및신에너지학회논문집
• /
• 제27권4호
• /
• pp.372-377
• /
• 2016

The carbon felt used as the electrode of vanadium redox flow battery (VRFB) requires imprived electrochemical activity for better battery performance and efficiencies. Many efforts have been tried to improve electrochemical activity of the carbon felt as electrodes. In this study the alkali solution, KOH, is applied on surface treatment of the carbon felt electrode. The carbon felts were treated with KOH under room temperature and $80^{\circ}C$. The isopropyl alcohol was applied to improve wettability of the carbon felt during KOH treatment. The KOH treated carbon felt was analyzed by using the X-ray photoelectron spectroscopy (XPS). The XPS analysis of carbon felt electrode revealed on increase in the overall surface oxygen content of the carbon felts after KOH treatment. Also, cyclic voltametry tests showed electrochemical characteristics enhancement of the carbon felt.

• Bulletin of the Korean Chemical Society
• /
• 제31권2호
• /
• pp.303-308
• /
• 2010

Pseudo-first-order rate constants ($k_{obsd}$) have been measured spectrophotometrically for nucleophilic substitution reactions of 4-nitrophenyl benzoate (5a), 4-nitrophenyl 4-methoxybenzoate (5b), and 4-nitrophenyl 4-hydroxybenzoate (5c) with alkali metal ethoxides, $EtO^-M^+$ ($M^+=Li^+$, $Na^+$ and $K^+$) in anhydrous ethanol (EtOH) at $25.0{\pm}0.1^{\circ}C$. The plots of $k_{obsd}$ vs. [$EtO^-M^+$] exhibit upward curvatures in all cases, indicating that $M^+$ ions catalyze the reactions and ionpaired $EtO^-M^+$ species are more reactive than dissociated $EtO^-$. Second-order rate constants for reactions with dissociated $EtO^-$ and ion-paired $EtO^-M^+$ (i.e., $k_{EtO^-}$ and $k_{EtO^-M^+}$, respectively) have been calculated from ion-pair treatment for the reactions of 5a and 5b. However, such ion-pair treatment has failed to determine $k_{EtO^-}$ and $k_{EtO^-M^+}$ values for the reactions of 5c. It has been concluded that reactions of 5a and 5b are catalyzed by one metal ion, which increases electrophilicity of the reaction center through coordination on the carbonyl oxygen. In contrast, reactions of 5c have been suggested to involve two metal ions, i.e., the one coordinated on the carbonyl oxygen increases the electrophilicity of the reaction center while the other one associated on the phenoxy oxygen decreases the charge repulsion between the anionic reagents (i.e., $EtO^-$ and deprotonated 5c). It has been found that the rate equation derived from the mechanism involving two metal ions fits nicely to the kinetic results obtained for the reactions of 5c.

• Journal of the Korean Wood Science and Technology
• /
• 제19권1호
• /
• pp.14-21
• /
• 1991

Steam-exploded woods were delignified by two-stage with a 0.3% NaOH extraction and oxygen-alkali bleaching and were subjected to the enzymatic hydrolysis with cellulase enzyme. Also, an improved almost quantitative recycle process of cellulase enzyme was discussed. In enzyme recovery by affinity method, The first recycling showed relatively high hydrolysis rate of 96.4%. Even at the third recycle, hydrolysis rate was 87.0 percents. In the case of cellulase recovery by ultrafiltration method, first 2 recycling treatments resulted in very high hydrolysis rates, 96.8% and 95.0%, respectively. Even the third recycling showed about 93.6%. Steam-explosion treatment of oak wood followed by 2-stage delignification with alkali and oxygen-alkali produced a excellant substrate for the enzymatic hydrolysis that allowed almost quantitative recycle of cellulase.

• 상하수도학회지
• /
• 제30권6호
• /
• pp.683-690
• /
• 2016

Modified coagulants were investigated for the removal of phosphorus from secondary effluent of wastewater treatment. The modified coagulants were prepared by mixing alkali earth metal ions such as calcium and magnesium. The basicity of a coagulant influenced on the removal of phosphorus, and coagulants with basicity of 5.9% showed a better removal of total phosphorus than that of 38.5%. Also, coagulants with alkali earth metals enhanced the performance of coagulation by 10% and resulted in 67.1% for total phosphorus removal. Moreover, the removal of suspended solids and chemical oxygen demand was improved using coagulants with low basicity and earth metal ions. Results of this study demonstrated that the use of coagulants with low basicity, and calcium and magnesium ions is recommended to improve wastewater effluent quality.

• 멤브레인
• /
• 제33권3호
• /
• pp.87-93
• /
• 2023

전기투석(ED)은 이온교환막을 통한 이온의 분리에서 중요한 과정이다. 해수담수화로 발생하는 염수 처리는 환경적으로 큰 문제이며 막분리 기술을 통한 재활용 효율이 높다. 마찬가지로 알칼리는 가죽, 전기도금, 염색, 제련 등과 같은 여러 화학 산업에서 생산된다. 폐기물의 고농도 알칼리는 부식성이 높고 화학적 산소 요구량(COD) 값이 높기 때문에 환경에 방출하기 전에 처리해야 합니다. 칼슘과 마그네슘의 농도는 염수의 거의 두 배이며 주요 환경 오염 물질인 이산화탄소의 흡착에 완벽한 후보입니다. 수산화나트륨은 양극성 막 전기투석 공정으로 쉽게 생산되는 금속 탄산화 공정에 필수적입니다. 역삼투압(RO), 나노여과(NF), 초여과(UF), ED 등 다양한 공정을 통해 회수가 가능하다. 본 검토에서는 알칼리 회수를 위한 이온교환막에 의한 ED 공정에 대해 논의한다.

• Journal of the Korean Wood Science and Technology
• /
• 제28권3호
• /
• pp.34-41
• /
• 2000

최근 들어 범용 플라스틱계 고분자의 환경오염이 심각한 사회적 문제를 유발함에 따라 많은 연구자들이 생분해성 고분자 소재 개발에 관한 연구를 시행하고 있으며, 본 연구에서는 폐지를 이용한 생분해성 고분자물질의 제조를 위하여 폐지의 화학적 성상 및 최적 전처리조건을 검토하기 위해 시행하였고, 그 결과는 다음과 같다. 각 공시재료별 화학적 조성분 분석 결과 신문폐지와 골판폐지의 리그닌 함량이 사무실 폐지에 비해 높게 나타났다. 또한 건식해리 펄프에 비해 습식해리 펄프의 회분 함량이 낮게 나타났다. 생분해성 고분자의 제조를 위해서는 반드시 폐지의 화학적 전처리가 요구되며, 습식해리 시료가 건식해리 시료에 비해 전처리 효과가 우수하였다. 본 연구에서 행해진 화학적 전처리 중 아염소산나트륨으로 가온($70^{\circ}C$)처리한 전처리방법이 가장 우수한 것으로 판명되었다. 한편 산소-알카리 전처리는 탈리그닌처리 효과는 우수하였지만, 수율이 과도하게 저하되고, 탄수화물의 붕괴에 따른 셀룰로오스의 중합도 저하로 인해 전처리 공정으로서 부적합하다고 판단되었다.