• Bulletin of the Korean Chemical Society
• /
• 제18권3호
• /
• pp.287-291
• /
• 1997

The photochemical reaction of aqueous dichloromethane in the absence (saturated with argon) and the presence of O2 (saturated with air or oxygen) has been investigated using 184.9 nm UV light. The irradiation of the solution causes the formation of 1,2-dichloroethane, 1,1,2-trichloroethane, 1,1,2,2-tetrachloroethane and chloride ion. The initial quantum yield of the products in the absence of oxygen was determined to be 8.6 × 10-3, 7.3 × 10-3, 4.4 × 10-3 and 2.3 × 10-2, respectively. In addition to these main products, small amounts of 1,2,3-trichloropropane, 1,1,2,2,3-pentachloropropane, 1,1,2,3,3-pentachloropropane, 1,3-dichloropropane and 1,1,2,2,3,3-hexachloropropane were detected. In the presence of oxygen, hydrogen peroxide was also detected along with the products listed above. With increasing the concentration of oxygen, while formation of the chlorinated organic products diminished, formation of chloride ion increased. Probable reaction mechanisms for the photochemical reaction were presented on the basis of products analysis.

• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.50-52
• /
• 2022

Brownish rings (BRs) with white interiors are formed during the manufacture of silicon ingots in quartz glass crucibles. These BRs inhibit the yield of silicon ingots. However, the composition and mechanism of the formation of these BRs remain unclear thus far. Therefore, in this study, we analyzed the color and shape of these BRs. Raman analysis revealed that the brown and white colors appear owing to oxygen deficiency rather than crystallization from excess oxygen supply as previously assumed. Moreover, the dark shade of the brown areas depends on the degree of oxygen deficiency and the asymmetrical width of the brown areas is attributed to the direction of the molten silicon flow, which is influenced by the rotation and heat of the ingot crucible.

• Journal of Microbiology and Biotechnology
• /
• 제21권6호
• /
• pp.652-658
• /
• 2011

The growth kinetics of Streptomyces noursei NRRL 5126 was investigated under different aeration and agitation combinations in a 5.0 l stirred tank fermenter. Poly-${\varepsilon}$-lysine biosynthesis, cell mass formation, and glycerol utilization rates were affected markedly by both aeration and agitation. An agitation speed of 300 rpm and aeration rate at 2.0 vvm supported better yields of 1,622.81 mg/l with highest specific productivity of 15 mg/l.h. Fermentation kinetics performed under different aeration and agitation conditions showed poly- ${\varepsilon}$-lysine fermentation to be a growth-associated production. A constant DO at 40% in the growth phase and 20% in the production phase increased the poly-${\varepsilon}$-lysine yield as well as cell mass to their maximum values of 1,992.35 mg/l and 20.73 g/l, respectively. The oxygen transfer rate (OTR), oxygen utilization rate (OUR), and specific oxygen uptake rates ($qO_2$) in the fermentation broth increased in the growth phase and remained unchanged in the stationary phase.

• 한국미생물·생명공학회지
• /
• 제17권6호
• /
• pp.624-628
• /
• 1989

A study on the citric acid production using Saccharomycopsis lipolytica (NRRL Y7576) was carried out in shake-flasks, air-lift and membrane recycle bioreactors. The cells entrapped in Ca-alginate beads were used in shake-flasks and air-lift reactor. Repeated batch fermentation in shake-flasks was successfully performed for 34 days and resulted in a yield of 54%. Increased yield (63%) was obtained in the air-lift reactor operation using nitrogen deficient medium (NDM). In the membrane recycle bioreactor operation, the maximal dry cell mass concentration was 39 g/1 at a dilution rate of 0.02 h$^{-1}$ and the yield with NDM was higher than that with growth medium. In addition, the yield and volumetric productivity with pure oxygen supply were greatly improved compared with those with air supply.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
• /
• pp.168-172
• /
• 2008

The flame retardancy by the addition of clay was evaluated to present as the fundamental data to decrease the fire hazard of polymers and life losses. The flame retardancy was examined to increase flame retardancy and to decrease smoke yield of epoxy by the addition of clay such as montmorillonite. For this study, the experiments of flame retardancy were conducted as follows : the measurement of the limiting oxygen index(LOI), char yield, and smoke density. As MMT concentration increased, epoxy/MMT composite increased LOI and char yield with the decreased smoke density.

• KSBB Journal
• /
• 제13권6호
• /
• pp.644-648
• /
• 1998

In the production of a low cost bacterial insecticide, it is important to produce a high spore concentration using low price substrates. Experiments were carried out to investigate the effects of the addition of mineral salts and glucose, and of dissolved oxygen concentration on the cell growth and spore formation of Bacillus thuringiensis var aizawai using a cheap wheat and soybean meal in the batch culture. The maximum viable cell number was 1.2${\times}$109 CFU/mL at 12 hr culture and spore yield was 54.2% at 74 hr culture using an industrial medium containing 20 g/L wheat meal and 30 g/L soybean meal under 1.0 vvm aeration and 200 rpm agitation. The cell growth and the spore formation were not enhanced by the addition of mineral salts in industrial medium, whereas th addition of 10g/L glucose decreased the cell growth and spore formation. We could obtain a maximum viable cell number of 2.2${\times}$109 CFU/mL and spore number of 1.9${\times}$109 CFU/mL at the dissolved oxygen concentration of 60% of saturation. The spore concentration was enhanced approximately by 2 times as compared to the dissolved oxygen concentration of 50%. In the bench-scale culture, the maximum viable cell and spore number were 2.5${\times}$109 CFU/mL, and 2.2${\times}$109 CFU/mL, respectively under 1.0 vvm aeration and 400 rpm agitation. The spore yield was 88% based on the maximum viable cell number. As a result, it was confirmed that the production of high spore concentration could be obtained by a bench-scale culture using an industrial medium.

• 한국세라믹학회지
• /
• 제42권3호
• /
• pp.188-192
• /
• 2005

무기 고분자인 polycarbosilane(PCS)으로부터 탄화규소 (SiC) 세라믹스로의 전환을 열산화에 의한 불융화 처리를 한 후 열분해 하는 공정과 불응화 처리를 하지 않고 열분해 하는 두 공정으로 각각 행하고, 수율 및 산소 함량을 비교하였다. 또한 두 공정으로 얻어진 SiC 세라믹스의 고온 안정성 평가를 위해 진공분위기의 고온에서 열처리 하여 무게 감량을 비교하였다. 열산화에 의한 불융화 처리를 한 후 열분해 하여 얻어진 SiC 세라믹스의 수율이 불융화 처리를 하지 않고 열분해 하여 얻어진 SiC세라믹스의 수율보다 높게 나타났으나, 이를 고온의 진공분위기에서 열처리 하였을 때는 열산화에 의해 불융화 처리를 한 공정으로부터 얻어진 SiC 세라믹스의 무게 감량이 크게 나타났다.

• 한국수소및신에너지학회논문집
• /
• 제26권5호
• /
• pp.477-483
• /
• 2015

LFG (Land-Fill Gas) includes components of $CH_4$, $CO_2$, $O_2$, $N_2$, and water. The preparation of synthesis gas from LFG as a DME (Dimethyl Ether) feedstock was studied by methane reforming of $CO_2$, $O_2$ and steam over $NiO-MgO-CeO_2/Al_2O_3$ catalyst. Our experiments were performed to investigate the effects of methane conversion and syngas yield on the amount of LFG components over $NiO-MgO-CeO_2/Al_2O_3$ catalyst. Results were obtained through the methan reforming experiments at the temperature of $900^{\circ}C$ and GHSV of 8,800. The results were as following; it has generally shown that syngas yield increase with the increase of oxygen and steam amounts and then decrease. Highly methane conversion of above 98% and syngas yield of approximately 60% were obtained in the feed of gas composition flow-rate of 243ml/min of $CH_4$, 241ml/min of $CO_2$, 195ml/min of $O_2$, 48ml/min of $N_2$, and 450ml/min of steam, respectively, under reactor pressure of 1 bar for 200 hrs of reaction time. Also, it was shown that catalyst deactivation by coke formation was reduced by excessively adding oxygen and steam as an oxidizer of the methane reforming.

• Journal of Microbiology and Biotechnology
• /
• 제19권3호
• /
• pp.299-306
• /
• 2009

Dissolved oxygen (DO) has a significant effect on the molecular weight of hyaluronic acid (HA) during the fermentation of Streptococcus zooepidemicus. Therefore, to further investigate the effect of DO on the yield and molecular weight of HA, this study compared the metabolic flux distribution of S. zooepidemicus under aerobic conditions at various DO levels. The metabolic flux analysis demonstrated that the HA synthesis pathway, considered a dependent network, was little affected by the DO level. In contrast, the fluxes of lactate and acetate were greatly influenced, and more ATP was generated concomitant with acetate at a high DO level. Furthermore, the has gene expression and HA synthase activity were both repressed under anaerobic conditions, yet not obviously affected under aerobic conditions at various DO levels. Therefore, it was concluded that the HA molecular weight would seem to depend on the concomitant effect of the generation of ATP and reactive oxygen species. It is expected that this work will contribute to a better understanding of the effect of the DO level on the mechanism of the elongation of HA chains.

• Bulletin of the Korean Chemical Society
• /
• 제28권11호
• /
• pp.2056-2060
• /
• 2007

A successful combination of “oxygen-assisted chemical vapor deposition (CVD) process” and Co catalyst nanoparticles to grow highly pure single walled carbon nanotubes (SWNTs) was demonstrated. Recently, it was reported that addition of small amounts of oxygen during CVD process dramatically increased the purity and yield of carbon nanotubes. However, this strategy could not be applied for discrete Fe nanoparticle catalysts from which appropriate yields of SWNTs could be grown directly on solid substrates, and fabricated into field effect transistors (FETs) quite efficiently. The main reason for this failure is due to the carbothermal reduction which results in SiO2 nanotrench formation. We found that the oxygen-assisted CVD process could be successfully applied for the growth of highly pure SWNTs by switching the catalyst from Fe to Co nanoparticles. The topological morphologies and p-type transistor electrical transport properties of the grown SWNTs were examined by using atomic force microscope (AFM), Raman, and from FET devices fabricated by photolithography.