• 자원리싸이클링
• /
• 제12권5호
• /
• pp.29-35
• /
• 2003

국내의 화력발전소에서 발생되는 Fly ash와 활성탄을 원료로 사용하여 환원질화방법에 의해 $\beta$-Sialon 분말을 합성하였다. 분말합성은 $1,450^{\circ}C$에서 10시간 동안 질소분위기에서 합성하였으며, 또한 소결체 제조는 $1,550^{\circ}C$에서 3시간 동안 관상로에서 소결하였다. 본 실험에서 합성된 $\beta$-Sialon의 z value는 2.15이었으며 XRD 분석결과 $\beta$-Sialon 이외에 소량의 $SiO_2$와 $_FeSi{x}$ 가 일부 확인되었다. $\beta$-Sialon 소결체는 20시간 동안의 고온산화 결과 1,31$0^{\circ}C$까지는 열적으로 매우 안정하나 $1,360^{\circ}C$ 부근에서는 급격한 무게의 증가를 나타냈다. $1,360^{\circ}C$에서 10시간 고온산화 후 산화층은 mullite로 상전이가 일어났다.

• 전기화학회지
• /
• 제12권1호
• /
• pp.54-60
• /
• 2009

The redox characteristics of 2-arylaldehydehydrazono-3-phenyl-5-substituted-2, 3-dihydro-1, 3, 4-thiadiazoles (1a-h) have been investigated in nonaqueous solvents such as 1, 2-dichloroethane (DCE), dichloromethane (DCM), acetonitrile (AN), Tetrahydrofuran (THF), and dimethylsulfoxide (DMSO) at platinum electrode. Through controlled potential electrolysis, the oxidation and reduction products of the investigated compounds had been separated and indentified. The redox mechanism had been suggested and proved. It had been found that all the investigated compounds were oxidized in two irreversible one-electron processes following the well-known pattern of The EC-mechanism; the first electron loss gives the corresponding cation-radical which is followed by proton removal from the ortho-position in the N-phenyl ring forming the radical. The obtained radical undergoes a second electron uptake from the nitrogen in the N = C group forming the unstable intermediate (di-radical cation) which undergoes ring closure forming the corresponding cation. The formed cation was stabilized in solution through its combination with a perchlorate anion from the medium. On the other hand, these compounds are reduced in a single two-electron process or in a successive two one-electron processes following the well known pattern of the EEC-mechanism according to the nature of the substituent; the first one gives the anion-radical followed by a second electron reduction to give the dianion which is basic enough to abstract protons from the media to saturate the (C = O) bond.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.19.2-19.2
• /
• 2010

Printed electronics using printing process has broadened in all respects such as electrics (lighting, batteries, solar cells etc) as well as electronics (OLED, LCD, E-paper, transistor etc). Copper is considered to be a promising alternative to silver for printed electronics, due to very high conductivity at a low price. However, Copper is easily oxidized, and its oxide is non-conductive. This is the highest hurdle for making copper inks, since the heat and humidity that occurs during ink making and printing simply accelerates the oxidation process. A variety of chemical treatments including organic capping agents and metallic coating have been used to slow this oxidation. We have established synthetic conditions of copper nanoparticles (CuNPs) which are resistant to oxidation and average diameter of 20 to 50nm. Specific resistivity should be less than $4\;{\mu}{\Omega}{\cdot}cm$ when sintered at lower temperature than $250^{\circ}C$ to be able to apply to conductive patterns of FPCBs using ink-jet printing. Through this study, the parameters to control average diameter of CuNPs were found to be the introduction of additive agent, the feeding rate of reducing agent, and reaction temperature. The CuNPs with various average diameters (58, 40, 26, 20nm) could be synthesized by controlling these parameters. The dispersed solution of CuNPs with an average size of 20 nm was made with nonpolar solvent containing 3 wt% of binder, and then coated onto glass substrate. After sintering the coated substrates at $250^{\circ}C$ for 30 minutes in nitrogen atmosphere, metallic copper film resulted in a specific resistivity of $4.2\;{\mu}{\Omega}{\cdot}cm$.

• Journal of Korean Society for Atmospheric Environment
• /
• 제19권E3호
• /
• pp.137-148
• /
• 2003

In this study, we examined the influence of long-range transport of dust particles and air pollutants on the photochemistry of NO$_3$on Jeju Island, Korea (33.17 N, 126.10$^{\circ}$E) during the Asian Dust-Storm (ADS) period of April 2001. Three ADS events were observed during the periods of 10∼12, 13∼14, and 25∼26 April. Average concentration level of nighttime NO$_3$on Jeju Island during the ADS period was estimated to be about 2 x 10$^{8}$ molecules cm$^{-3}$ ( - 9 pptv). Decreases in NO$_3$levels during the ADS period was likely to be determined mainly by the enhancement of the $N_2$O$_{5}$ heterogeneous reaction on dust aerosol surfaces. The reaction of N20s on aerosol surfaces was a more important sink for nighttime N03 during the ADS due to the significant loading of dust particles. The reaction of $N_2$O$_{5}$ with NMHCs and the gas-phase reaction of N20s with water vapor were both significant loss mechanisms during the study period, especially during the NADS. However, dry deposition of these oxidized nitrogen species and a heterogeneous reaction of NO$_3$were of no importance. Short-term observations of $O_3$, NO$_2$, DMS, and SO$_2$in the MBL indicated that concentrations of most of these chemical species were different between the ADS and non - Asian - Dust-Storm (NADS) periods, implying that their levels were affected sensitively by the differences in air mass trajectories.

• 한국전기전자재료학회논문지
• /
• 제13권4호
• /
• pp.349-358
• /
• 2000

Fabrication and Characterization of Bi$_{2}$/Sr$_{2}$/CaCu$_{2}$/O$_{8}$(Bi2212) superconductor thick films were fabricated successfully on C tapes by liquid reaction between Cu-free precursors of Bi$_{x}$/SrCaO/$_{y}$(x=1.2-2) and Cu tapes. Cu-free Bi-Sr-Ca-O powder mixtures were screen-printed on Cu tapes and heat-treated at 850-87$0^{\circ}C$ for several minutes in air oxygen nitrogen and low oxygen pressure. In order to obtain the optimum heat-treatment condition we studied the effect of the precursor composition the printing thickness and the heat-treatment atmosphere on the superconducting properties of Bi2212 films and the reaction mechanism. Microstructures and phases of thick films were analyzed by films and the reaction mechanism. Microstructures and phases of thick films were analyzed by optical microscope and XRD. The electric properties of superonducting films were examined by the four probe method. At heat-treatment temperature the thick films were in a partially molten state by liquid reaction between CuO of the oxidized copper tape and the precursors which were printed on Cu tapes. During the heat-treatment procedure Bi2212 superconducting particle nucleate and grow in preferred orientations.ons.s.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1995년도 추계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.25-25
• /
• 1995

Liquid phase sintering of 90W-6Ni-4Mn alloy has been investigated as functions of sintering atmosphere, heating rate, and reduction temperature. The present work accounts for the thermodynamic oxidatiodreduction reactions of constituent powders of W, Ni and Mn. By discounting these reactions, the previous investigations would obtain only the alloy with large pores and the lowered relative sintered density, by the liquid phase sintering under a dry hydrogen atmosphere. the sintering cycle consisted of a rapid heating to reduction temperatures under high purity nitrogen atmosphere, and holding for 4 hours and sintering at $1260^{\circ}C$ for 1 hour under a dry hydrogen gas. The relative density of the sintered alloy increased with increasing heating rate. As the reduction temperature increased, the relative density increased to the lm theotical density at the duction temture above $1150^{\circ}C$. The mimsturcatre of sintered alloys has been analysed by a scanning election microscope. The sintered density was compared with those obtained from the other investigators. It was found that the reduction $1150^{\circ}C$ results in the lowered densification of 90W-6Ni-4Mn alloy. This is caused by the fact that reducing reactions of W and Ni oxides contained in W an Ni powders concomitantly leads to oxidizing reaction of Mn powder the oxidized Mn is hardly reduced at sintering temperature and thereby remains large pores in the alloy. It is concluded that the W-Ni-Mn alloy with full density can be obtained by the precise control of atmosphere, heating rate, and sintering temperature.

• 청정기술
• /
• 제16권1호
• /
• pp.1-11
• /
• 2010

우리가 사용하는 원유는 점점 중질화 되고 산도가 높아지고 있다. 석유의 품질에 영향을 미치는 유황의 함량을 조절하고, 오염금속을 제거하기 위하여 탈황, 탈질, 탈금속 등 불순물 제거기술의 중요성이 커지고 있으며 제품의 생산량과 수율을 조절하기 위한 정제 관련 촉매기술의 중요성 역시 증대하고 있다. 본 논문에서는 원유에서 황, 질소, 금속성분 등을 제거하는 기술과 원유의 정제와 관련된 촉매 기술에 대하여 한국, 미국, 일본, 유럽 등을 중심으로 1970년대 중반부터 2009년까지의 특허를 조사하고, 각국의 출원현황, 점유율, 주요출원인, 특허활동지수 등을 분석하였다. 또한, 주요 기술 분야에 대한 기술흐름도를 작성하여 기술 동향을 살펴보았다.

• 농업생명과학연구
• /
• 제50권2호
• /
• pp.125-138
• /
• 2016

산업화를 위한 지구자 및 12가지 식물성 원료 추출물의 생리학적 효과를 평가하기 위하여, 만성 에탄올을 투여한 마우스 혈청 내에서의 생리학적 지표 및 간과 뇌 조직 내에서의 산화적 스트레스에 대한 보호효과를 확인하였다. 에탄올을 투여한 마우스의 혈당은 정상 대조군 그룹(NG)과 에탄올 투여 그룹(EG)에서 각각 119.43mg/dL, 305.25mg/dL로 나타났고, 에탄올과 혼합 추출물을 동시에 투여한 그룹(100, 200mg/kg body weight + 25% ethanol 5g/kg body weight, ME100, ME200)에서 각각 272.76mg/dL, 234.60mg/dL로 감소하였다. 혈중 에탄올 함량은 EG에서 4.08mg/dL를 나타내었고 ME100, 200에서 각각 3.85mg/dL, 3.08mg/dL로 감소하였으며, 혈중 아세트알데하이드 함량은 18.72mg/dL에서 각각 15.76mg/dL, 15.16mg/dL로 감소하였다. 또한 ME100, ME200은 혈청 내의 생리학적 지표에서 간 독성 지표인 glutamine pyruvic transaminase(GPT), glutamic oxaloacetic transaminase(GOT)와 신장 독성 지표인 blood urea nitrogen(BUN), creatine(CRE), 혈중 total cholesterol(TCHO), triglyceride(TG)의 함량이 유의하게 감소하였다. 뇌 조직에서 에탄올에 의해 acetylcholinesterase(AChE)가 EG(116.10%)에서 NG(100.00%)와 비교하였을 때 증가된 활성을 나타냈으나, ME에서 각각 109.00%와 108.47%로 유의적으로 감소하였다. ME에서 EG에 비해 간과 뇌 조직에서 superoxide dismutase(SOD)의 함량이 증가하였고, oxidized glutathione(GSH)/total GSH 비율과 malondialdehyde(MDA)의 함량이 감소하였다. 이러한 결과들을 통해 지구자를 포함한 혼합 추출물은 간, 뇌 조직 및 혈액 등에서 만성 에탄올 섭취에 의해 유발된 산화적 스트레스를 효과적으로 보호할 수 있는 제품으로의 개발이 가능할 것으로 판단된다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제10권E호
• /
• pp.311-324
• /
• 1994

The quantitative knowledge of N $O_{\gamma}$ (＝N $O_{x}$ ＋HN $O_3$＋/PAN＋N $O_3$ ＋$N_2$ $O_{5}$ ＋HN $O_2$＋N $O_3$$^{-10}$ ＋organic nitrates＋......)distribution is essential in tropospheric chemistry, especially, especially that related to understanding the processes leading to ozone production. Ambient concentrations of NO, N $O_2$, HN $O_3$ and PAN as well as total N $O_{\gamma}$ were measured during June and early July 1992 at a rural site(Candor, NC), in the central Piedmont region of NC. The measurements of N $O_{\gamma}$ species were made in an effort to provide a comprehensive understanding of nitrogen chemistry and to investigate the total nitrogen budget at the site. N $O_{\gamma}$, N $O_2$, and NO showed diurnal variations with maxima in the morning. The maximum N $O_{\gamma}$ concentration reached was 14.5 ppbv, and the maximum concentrations of NO and N $O_2$ were 5.4 and 7.8 PPbv, respectively. The mean N $O_{\gamma}$ concentration as found to be 2.88$\pm$1.58 ppbv(n=743). The mean concentrations of NO and N $O_2$, were found to be 0.15 $\pm$ 0.29 ppbv(n＝785) and 1.31 $\pm$ 0.99 ppbv(n＝769). Products of photochemical oxidants, (N <$O_{\gamma}$-N $O_{x}$ ), such as HN $O_3$ and PAN, as well as ozone showed diurnal variation with maxima in the afternoon and minima at night The fractions of individual reactive nitrogen species to total N $O_{\gamma}$ were investigated and contrasted to the results from remote marine site and rural continental sites. N $O_{x}$ was the major species to total N $O_{\gamma}$(45%). NO concentrations appeared to be nearly constant whether the Prevailing winds were from continental areas or from oceanic areas. Linear regression of $O_3$ with (N $O_{\gamma}$- N $O_{x}$ )/N $O_{\gamma}$ (i.e. percent N $O_{x}$ converted to the photochemical products of N $O_{\gamma}$) yielded ( $O_3$) ＝25.8 〔 N $O_{\gamma}$-N $O_{x}$ 〕/(N $O_{\gamma}$) ＋27, ( $r^{2}$＝0.58). The regression intercept is interpreted as the ozone back ground (intercept=27ppbv) and the slope suggests that 8.6 molecules of ozone are formed per molecule of N $O_{x}$ oxidized products (when the average N $O_{\gamma}$ concentration, about 3 ppbv at the site, is used). The N $O_{x}$ N $O_{\gamma}$ ratio was used as an indicator of the chemical age of airmasses and the ratio showed strong positive correlations with HN $O_3$( $r^{2}$=0.58), PAN ( $r^{2}$=0.46) and $O_3$( $r^{2}$=0.62). Larger N $O_{\gamma}$ and N $O_{x}$ N $O_{\gamma}$ ratio were found when winds came from continental sides. It may suggest that synoptic meteorological conditions and transport of N $O_{x}$ are important in the distribution of N $O_{\gamma}$ and its relationship with photochemical oxidants at the site.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.87-87
• /
• 2010

Photoelectrochemical (PEC) systems are promising methods of producing H2 gas using solar energy in an aqueous solution. The photoelectrochemical properties of numerous metal oxides have been studied. Among them, the PEC systems based on TiO2 have been extensively studied. However, the drawback of a PEC system with TiO2 is that only ultraviolet (UV) light can be absorbed because of its large band gap (3.2 - 3.4 eV). Two approaches have been introduced in order to use PEC cells in the visible light region. The first method includes doping impurities, such as nitrogen, into TiO2, and this technique has been extensively studied in an attempt to narrow the band gap. In comparison, research on the second method, which includes visible light water splitting in molecular photosystems, has been slow. Mallouk et al. recently developed electrochemical water-splitting cells using the Ru(II) complex as the visible light photosensitizer. the dye-sensitized PEC cell consisted of a dye-sensitized TiO2 layer, a Pt counter electrode, and an aqueous solution between them. Under a visible light (< 3 eV) illumination, only the dye molecule absorbed the light and became excited because TiO2 had the wide band gap. The light absorption of the dye was followed by the transfer of an electron from the excited state (S*) of the dye to the conduction band (CB) of TiO2 and its subsequent transfer to the transparent conducting oxide (TCO). The electrons moved through the wire to the Pt, where the water reduction (or H2 evolution) occurred. The oxidized dye molecules caused the water oxidation because their HOMO level was below the H2O/O2 level. Organic dyes have been developed as metal-free alternatives to the Ru(II) complexes because of their tunable optical and electronic properties and low-cost manufacturing. Recently, organic dye molecules containing multi-branched, multi-anchoring groups have received a great deal of interest. In this work, tri-branched tri-anchoring organic dyes (Dye 2) were designed and applied to visible light water-splitting cells based on dye-sensitized TiO2 electrodes. Dye 2 had a molecular structure containing one donor (D) and three acceptor (A) groups, and each ended with an anchoring functionality. In comparison, mono-anchoring dyes (Dye 1) were also synthesized. The PEC response of the Dye 2-sensitized TiO2 film was much better than the Dye 1-sensitized or unsensitized TiO2 films.