• 한국세라믹학회지
• /
• 제43권11호
• /
• pp.715-723
• /
• 2006

Perovskite oxide materials are very important for the electronics industry, because they exhibit promising properties. With an interest in the obvious applications, significant effort has been invested in the growth of highly crystalline epitaxial perovskite oxide thin films in our laboratory. And the desired structure of films was formed to achieve excellent properties. $Y_1Ba_2Cu_3O_{7-x}$ (YBCO) superconducting thin films were simultaneously deposited on both sides of 3 inch wafer by inverted cylindrical sputtering. Values of microwave surface resistance R$_2$ (75 K, 145 GHz, 0 T) smaller than 100 m$\Omega$ were reached over the whole area of YBCO thin films by pre-seeded a self-template layer. For implementation of voltage tunable high-quality varactor, A tri-layer structured SrTiO$_3$ (STO) thin films with different tetragonal distortion degree was prepared in order to simultaneously achieve a large relative capacitance change and a small dielectric loss. Highly a-axis textured $Ba_{0.65}Sr_{0.35}TiO_3$ (BST65/35) thin films was grown on Pt/Ti/SiO$_2$/Si substrate for monolithic bolometers by introducing $Ba_{0.65}Sr_{0.35}RuO_3$ (BSR65/35) thin films as buffer layer. With the buffer layer, the leakage current density of BST65/35 thin films were greatly reduced, and the pyroelectric coefficient of $7.6\times10_{-7}$ C $cm^{-2}$ $K^{-1}$ was achieved at 6 V/$\mu$m bias and room temperature.

• 한국재료학회지
• /
• 제4권1호
• /
• pp.37-43
• /
• 1994

Y-BA-Cu-O계 고온초전도체의 미세조직을 가공과 열처리로써 제어하여 조직의 배향화와 치밀화를 기하여 높은 임계전류밀도($J_c$)를 갖는 초전도체의 개발을 목적으로sinter forging법으로 Y-BA-Cu-O/Ag 고온초전도복합체를 제조하였다. sinter forging을 통하여 고온 초전도체의 미세조직의 texture화를 가져왔으며, 이 경우 (123)결정립의 C축 방위가 단일축의 압축방향으로 배향화 되었다. 한편, texture의 orientation facter는 고온일수록, 압력이 클수록 크고, 조직의 배향화도 뚜렷하였으며 그에 따라 $J_c$역시 증가하였다. 이러한 결과로 미루어 결정의 배향도는 $J_c$를 좌우하는 중요한 변수라고 사려되었다. 또한 sinter forging 시킨Y-MA-Cu-O/Ag 복합체의 on set온도는 sinter forging온도에 크게 의존치 않았으나, 고온일수록 off set 온도($T_c\;^{zero}$)가 다소 떨어졌다. 한편, 첨가된 Ag는 주고(123)결정입계에 존재하였으며, 이들이 (123)결정립간의 결합을 촉진시켜 임계전류밀도를 크게 향상시켰으며, Y-BA-Cu-O/Ag 복합체의 $J_c$는 2,000 A/$\textrm{cm}^2$ 이상이었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.269-273
• /
• 1991

High Tc oxide superconductor with a Tc above 100 K has been successfully prepared by solid state reaction method in added-Pb BiSrCaCuO system. As compared with 123 compound, the formation reaction of the high Tc requires long time heat treatment. It is due to the transformation from the low Tc phase to high Tc phase. The sintering just below the melting point of the calcined powder mixture is effective on the formation of the high Tc phase in BiSrCaCuO system to be added with Pb. The growth of the high Tc superconducting phase has a thin plate shape, which is characterized by the c parameter of 37${\AA}$. The formation kinetics is also investigated in the samples with different Bi/Pb ratio and the 30% Pb addition is most preferable for the formation of the high Tc phase. The formation of the high Tc phases is delayed by the excessive addition of Pb. The lattice parameter(c) of the unit cell(both the low and high Tc phases) is increased with increase of Pb.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권4호
• /
• pp.16-20
• /
• 2015

We investigated optical properties of an electron-doped copper oxide high temperature superconductor, $Pr_{0.85}LaCe_{0.15}CuO_4$ (PLCCO) single crystal. We obtained the optical conductivity from measured reflectance at various temperatures. We found our data contained c-axis longitudinal optical (LO) phonon modes due to miscut and intrinsic lattice distortion. We applied an extended Drude model to study the correlations between charge carriers in the system. The LO phonons appear as strong sharp peaks in the optical scattering rate. We tried to remove the LO phonon modes by using the energy loss function, which also shows the LO phonons as peaks, and could not remove them completely. We extracted the electron-boson spectral density function using a generalized Allen's formula. We observed that the resulting electron-boson density show similar temperature dependence as hole-doped cuprates.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1660-1662
• /
• 1996

Superconducting current lead is one of the promising applications of the oxide high-Tc superconductors, because they have the advantage of decreasing heat conduction to low temperature region, comparing with a conventional cooper alloy lead. High critical current density is a key factor for the applications such as current lead. $(Bi,Pb)_{2}Sr_{2}Ca_{2}Cu_{3}O_{x}$ high Tc superconductor hase been investigated in terms of critical current density. Bi-2223 superconducting current lead made by CIP and solid state sintering process. Bi-2223 current lead that heat treated at $836\;^{\circ}C$ for 240 h in 1/13 $PO_2$ had over $500\;A/cm^2$ of critical current density at 77K. We knew that the superconducting properties of tube type current leads were better than rods type of them. And we investigated the relation of Bi-2223 formation and heat treatment condition by XRD and SEM analysis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.104-106
• /
• 2003

다층의 산화물 박막으로 이루어진 coated conductor의 제조를 위하여 각층의 증착조건이 최적화되어야 한다. 가공/열처리를 통하여 2축배향성을 가지는 Ni 금속 기판위에 $Y_2O_3$, YSZ, $CeO_2$ 등의 산화물 완충층을 증착한 후 초전도층인 YBCO를 증착하였다. 12도와 8도의 in-plane fwhm (full width at half maximum)과 out-of-plane fwhm을 가지는 Ni 기판을 이용하여 13도와 4.5도의 in-plane 및 out-of-plane fwhm을 가지는 YBCO coated conductor를 제조하였다. 임계온도 (Tc), 임계전류 (Ic), 및 임계전류밀도 (Jc) 는 각각 84K, 3.3A, 및 $310,000\;A/cm^2$ 이었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권4호
• /
• pp.7-16
• /
• 2014

Rare-earth barium copper oxide (REBCO) coated conductor (CC) tapes have already been commercialized but still possess some issues in terms of manufacturing cost, anisotropic in-field performance, $I_c$ response to mechanical loads such as delamination, homogeneity of current transport property, and production length. Development on improving its performance properties to meet the needs in practical device applications is underway and simplification of the tape's architecture and manufacturing process are also being considered to enhance the performance-cost ratio. As compared to low temperature superconductors (LTS), high temperature superconductor (HTS) REBCO CC tapes provide a much wider range of operating temperature and a higher critical current density at 4.2 K making it more attractive in magnet and coil applications. The superior properties of the REBCO CC tapes under magnetic field have led to the development of superconducting magnets capable of producing field way above 23.5 T. In order to achieve its optimum performance, the electromechanical properties under different deformation modes and magnetic field should be evaluated for practical device design. This paper gives an overview of the effects of mechanical stress/strain on $I_c$ in HTS CC tapes due to uniaxial tension, bending deformation, transverse load, and including the electrical performance of a CC tape joint which were performed by our group at ANU in the last decade.

• Bulletin of the Korean Chemical Society
• /
• 제15권7호
• /
• pp.545-549
• /
• 1994

Using the extended Hackel molecular orbital method in connection with the tight binding model, we have studied electronic structure and related properties of the charged cluster models relating to superconducting $YBa_{2}Cu_{3}O_{7-x}$, crystals in which O-atoms in regular sites were selectively replaced with Se atoms. In analogy to the isomorphism problem with molecules, we discuss all possible combinations of Se-substitutions in O-sites with one, two, and four Se atoms. The calculations are carried out within charged cluster models for analogues of YBa-copper oxide. Our results suggest that the electronic structure of the symmetrically Se-substituted or Se-added compound is closer to that of the YBCO superconducting compound than that obtained from the unsymmetrical substitution. This applies in particular if O is replaced with Se around the Cu(1) site. Symmetrical substitutions in the $CuO_2$ layers give rise to large variations in the electronic structure of $YBa_{2}Cu_{3}O_{7}$. This is consistent with the fact that superconductivity is very sensitive to the electronic population of the $CuO_2$ layers.

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권4호
• /
• pp.75-80
• /
• 2023

Rare earth barium copper oxide (REBCO) materials have shown the possibility of high-temperature superconductor (HTS) magnetic resonance imaging (MRI) magnets due to their elevated transition temperature. While numerous MRI magnet designs have emerged, there is a growing emphasis on estimating the cost before manufacturing. In this paper, we propose two designs of REBCO whole-body MRI magnets: (1) 1.5 T and (2) 3.0 T, the standard center field choices for hospital use, and compare their costs based on conductor usage. The basis topology of the design method is based on discretized solenoids to enhance field homogeneity. Magnetic stress calculation is done to further prove the mechanical feasibility of their construction. Multi-width winding technique and outer notch structure are used to improve critical current characteristic. We apply consistent constraints for current margins, sizes, and field homogeneities to ensure an equal cost comparison. A graph is plotted to show the cost increase with magnetic flux growth. Additionally, we compare our designs to two additional MRI magnet designs from other publications with respect to the cost and magnetic flux, and present the linear relationship between them.

• Bulletin of the Korean Chemical Society
• /
• 제10권6호
• /
• pp.504-509
• /
• 1989

The effect of oxygen-deficiency on the charge distributions and orbital energies for small copper oxide clusters representing the superconducting materials $YBa_2Cu_3O_x (6{\leq}x{\leq}7)$ were investigated by the extended Huckel molecular orbital (EHMO) method with the tight-binding model. Our calculations show +3 oxidation state of Cu(1) in the $CuO_3$ chain and +2 or +1 of Cu(2) in the $CuO_2$ layers for $YBa_2Cu_3O_7$ with the nominal charge of $Cu_3$ = +7 (or +5), while for $YBa_2Cu_3O_6$ +1 oxidation state of Cu(1) and +3 (or +2) of Cu(2) in the $CuO_2$ layers with the nominal charge of $Cu_3$ = +7 (or +5). For $Cu_3O_{12}$ cluster representing $YBa_2Cu_3O_7$ with the nominal charge of $Cu_3$ = +7 the Cu(2) $d_{{x^2}-{y^2}}$ orbitals in the $CuO_2$ layers is a typical Jahn-Teller $d^9$ system with the partial hole and the Cu(1) $d_{{_z2}-{_y2}}$ orbital in the $CuO_3$ chain contains hole occupancy. For $Cu_3O_{10}$ cluster representing $YBa_2Cu_3O_6$ with the nominal charge of Cu = +5 the orbital character of the highest partially occupied MO (HPOMO) and the lowest completely unoccupied MO (LCUMO) of $Cu_3O_{12}$ representing $YBa_2Cu_3O_7$ with the nominal charge of $Cu_3$ = +7 is reversed, and the character of Cu(1) $d{{x^2}-{y^2}}$ orbital of LCUMO of the $Cu_3O_{12} $cluster is vanished. It is suggested that the local crystal field environment of Cu(1) by the oxygens in the Cu(1) chain may play a vital role in conductivity and superconductivity, either alone or through cooperative electronic coupling with the Cu(2) layers in $YBa_2Cu_3O_7.$.