• Journal of the Korean Ceramic Society
• /
• v.51 no.4
• /
• pp.243-247
• /
• 2014

Spherical NiO-YSZ particles were synthesized by ultrasonic spray pyrolysis (USP). The morphology of the synthesized particles can be modified by controlling parameters such as precursor pH, carrier-gas flow-rate, and temperature of the heating zone. The synthesized spherical NiO-YSZ particles have rough surface morphology at high carrier-gas flow-rates due to rapid gas exhaustion and insufficient particle ordering. The Ni-YSZ cermet anode synthesized by ultrasonic spray pyrolysis at a flow rate of l L/min, with precursor solution at pH4, showed a higher maximum power density of 256 $mW/cm^2$ compared to a conventionally mixed Ni-YSZ anode (185 $mW/cm^2$) at $800^{\circ}C$. While the area-specific resistance of conventionally mixed Ni-YSZ anodes increases gradually with operation time (indicating performance degradation), the Ni-YSZ anode synthesized by USP does not exhibit any performance degradation, even after 500 h.

• Journal of the Korean Home Economics Association
• /
• v.20 no.2
• /
• pp.45-51
• /
• 1982

Degree of separation and adhesion of dye and stain particles has been measured usually by the rate of reflection of light. However, it could be proved that the relation between the quantity of stain and the rate of reflection greatly varied with kinds of stain and states of adhesion. For this study, several pieces of cotton and polyester having different states of stain adhesion were prepared by staining them with two kinds of artificial stain different in color: Ferric Oxide and Ferric Oxynate. Every piece went through soilremoval test which employed two surfactants: Anionic LAS and Cationic M2-100. After the operation, relations between quantity of pre-soilremoval stain and rate of reflection were measured, as well as those between quantity of post-soilremoval stain and rate of reflection. Rate of reflection and quantity of stain were not proportional in measurement to the pieces stained with Ferric Oxide and Ferric Oxynate. The consequence was also the same with cotton and polyester. That held true of the fat-stained textile. With the same quantity of stain, rate of reflection varied according to the magnitude of stain particles, and the state of adhesion influenced the magnitude of stain particles a great deal.

• Korean Journal of Materials Research
• /
• v.31 no.6
• /
• pp.339-344
• /
• 2021

Composite materials offer distinct and unique properties that are not naturally inherited in the individual materials that make them. One of the most attractive composites to manufacture is the aluminum alloy matrix composite, because it usually combines easiness of availability, light weight, strength, and other favorable properties. In the current work, Powder Metallurgy Method (PMM) is used to prepare Al2024 matrix composites reinforced with different mixing ratios of yttrium oxide (Y₂O₃) particles. The tests performed on the composites include physical, mechanical, and tribological, as well as microstructure analysis via optical microscope. The results show that the experimental density slightly decreases while the porosity increases when the reinforcement ratio increases within the selected range of 0 ~ 20 wt%. Besides this, the yield strength, tensile strength, and Vickers hardness increase up to a 10 wt% Y₂O₃ ratio, after which they decline. Moreover, the wear results show that the composite follows the same paradigm for strength and hardness. It is concluded that this composite is ideal for application when higher strength is required from aluminum composites, as well as lighter weight up to certain values of Y₂O₃ ratio.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.251-251
• /
• 2009

The generation of energy and the cooling of system using thermoelectric semiconductor material have been in spotlight. Thermoelectric effect increases with the decrease of the thermal conductivity. In the thermoelectric devices, thermal conductivity is related to phonon scattering. Therefore, few studies have been conducted in the thermoelectric materials dispersed nano oxide particle for increasing the phonon scattering. However, core-shell structure which nano particle disperses in solvents and then which thermoelectric materials coated on the nano oxide particles has not been reported. In this study, we selected commercial nano powder such as $Al_2O_3$. This nano particle was about 20nm and was crushed aggregate by mechanical treatment. We have developed the effect of the dispersant and the solvent. The properties of particles were evaluated by SEM, TEM, particle size analysis, and BET. Dispersion and dispersion stability were evaluated by electronic microscope and turbidity.

• Journal of Welding and Joining
• /
• v.5 no.2
• /
• pp.17-26
• /
• 1987

In this study, the experiments were carried out for the purpose of establishment of the arc sparing method which reducing oxides or oxide film by using the inert gas as the carrier gas of atomizing particles. Main results obtained are as follows; 1. Oxides and oxide film which lower the adhesion strength are largely reduced by using the inert gas as the carrier gas of atomizing particles, and adhesion strength of coating film are improved. 2. The coating film characteristics appear to be no difference between the inert gas arc spraying in air environment and that in argon gas environment. 3. Inert gas arc spraying using argon as the carrie gas has higher reduction rate of composition element in coating film than compressed air spraying does.

• Korean Journal of Pharmacognosy
• /
• v.29 no.4
• /
• pp.391-395
• /
• 1998

The phagocytic activity of murine peritoneal macrophages was determined by lucigenin chemiluminescence with luminometer and engulfment of fluorescein-conjugated E. coli particles. 70% MeOH extract of Lithospermi Radix was fractionated successively with hexane, methylene chloride, n-BuOH and water. The water fraction (m.w. 500 to 1,000) enhanced the lucigenin chemiluminescence and the engulfment of fluorescein-conjugated E. coli particles in murine peritoneal macrophages. The water fraction suppressed the production of nitric oxide in the macrophages. These results suggest that an active fraction of phagocytosis in Lithos-permi Radix is the water fraction and the molecular weight is 500 to 1,000.

• Journal of Powder Materials
• /
• v.11 no.6 s.47
• /
• pp.467-471
• /
• 2004

In order to fabricate a high density sintered body of ITO, nano-sized ITO powders were synthesized by coprecipitation methods. Aqueous solutions of indium and tin salts were mixed and coprecipitated by changing their pH. Coprecipitated ITO powders possessed 20-30 nm crystallite size and a relatively high BET value ($35m^2/g$), however, aggregation of particles were occurred. Therefore, a novel recrystallization technique was applied in order to eliminate the aggregates. The recrystallized ITO material consists of a little bit larger needlelike crystals, $20nm{\times}80nm$, and it possesses a higher BET value $(57m^{2}/g)$ compared to the plain coprecipitated material $(35m^{2}/g)$. Metastable phase formation and higher content of aggregated particles were observed in the coprecipitated materials. Densification was 95% to 98% complete after 5 hour sintering at $1500^{\circ}C$ for the recrystallized powders while densities of the coprecipitated powders were below 75%.

• Journal of Powder Materials
• /
• v.11 no.1
• /
• pp.16-21
• /
• 2004

The nano-sized Co particles were successfully synthesized by chemical vapor condensation (CVC) process using the precursor of cobalt carbonyl ($Co_2(CO)_8$). The influence of carrier gases on the microstructure and magnetic properties of nanoparticles was investigated by means of XRD, TEM, XPS and VSM. The Co nano-particles with different phases and shapes were synthesized with a change of carrier gas : long string morphologies with coexistence of fcc and hcp structure in Ar carrier gas condition; finer Co core in a mass of cobalt oxide with only fcc structure in He; rod type cobalt oxide phase in Ar＋6vol％$O_2$. The saturation magnetization and coercivity was lower in Co nanoparticles synthesized in He carrier gas, due to their finer size.

• Journal of Photoscience
• /
• v.1 no.2
• /
• pp.107-111
• /
• 1994

Photocatalytic ($\lambda$$_{ex}$ > 300 nm) reaction at room temperature by platinized titanium (IV) oxide particles produced 1-methyl-1, 2, 3, 4-tetrahydroisoquinolines (MIQ's) from phenethylamines in aqueous ethanol suspension under deaerated atmosphere. Among the phenethylamines, dopamine (2-(3, 4-dihydroxyphenyl) ethylamine) showed the highest reactivity to give MIQ almost selectively under the neutralized conditions. The other phenethylamines gave predominantly N-alkylated and N, N-dialkylated products in the methanol or ethanol solutions. The reaction mechanism includes a Schiff base intermediate to undergo either nucleophilic attack leading to MIQ or reduction to N-alkylated products.

• Journal of Magnetics
• /
• v.13 no.3
• /
• pp.106-109
• /
• 2008

Almost monodisperse iron oxide nanoparticles with an average particle size ranging from 5 to 43 nm were fabricated using an environmentally friendly starting material, ferrous acetate. The smallest particles were formed in the presence of a reductant, 1,2-dodecanediol, while the particle size increased with increasing concentration of dispersing agents. The dispersants consisted of various combinations of oleic acid, oleylamine, trioctylphosphine, and polyvinylpyrrolidone. The threshold temperature to form crystalline particles was found to be $240^{\circ}C$. The 43 nm nanoparticles exhibited a room temperature saturation magnetization and coercivity of 57 emu/g and 47 Oe, respectively.