• 한국환경과학회지
• /
• 제15권3호
• /
• pp.193-201
• /
• 2006

Advanced oxidation processes involving $O_3/H_2O_2$ and $O_3/catalyst$ were used to compare the degradability and the effect of pH on the oxidation of 1,4-dioxane, Oxidation processes were carried out in a bubble column reactor under different pH. Initial hydrogen peroxide concentration was 3.52 mM in $O_3/H_2O_2$ process and 115 g/L (0.65 wt.%) of activated carbon impregnated with palladium was packed in $O_3/catalyst$ column. 1,4-dioxane concentration was reduced steadily with reaction time in $O_3/H_2O_2$ oxidation process, however, in case of $O_3/catalyst$ process, about $50{\sim}75%$ of 1,4-dioxane was degraded only in 5 minutes after reaction. Overall reaction efficiency of $O_3/catalyst$ was also higher than that of $O_3/H_2O_2$ process. TOC and $COD_{cr}$ were analyzed in order to examine the oxidation characteristics with $O_3/H_2O_2\;and\;O_3/catalyst$ process. The results of $COD_{cr}$ removal efficiency and ${\Delta}TOC/{\Delta}ThOC$ ratio in $O_3/catalyst$ process gave that this process could more proceed the oxidation reaction than $O_3/H_2O_2$ oxidation process. Therefore, it was considered that $O_3/catalyst$ advanced oxidation process could be used as a effective oxidation process for removing non-degradable toxic organic materials.

• 생명과학회지
• /
• 제5권2호
• /
• pp.14-14
• /
• 1995

The effect of lipoxygenase (LOX) on the oxidation and co-oxidation of lipid fraction was studied in the model system of rainbow trout. For the reaction in model system 1 g of lipid fraction and 50mL of enzyme extract(LOX, 140 unit in 50mL phosphate buffer solution at pH 7,4)), which were obtained from rainbow trout, were homoginized in the presence of Tween 20 and kept at 23$\circ$C for 3 days. The activity of LOX was decreased to 43% of initial level during the reaction in the model system. The initial composition of rainbow trout lipid was showed to be consisted of trigliceride(TG;82%) and free fatty acid(FFA;0.1%), while this converted to 59% of TG and 20% of FIFA, respectively after reaction in model system. Change of fatty acid composition was also observed and the content of linoleic acid, one of the major fatte acids, was decreased to 13% from 54% in the content of total fatty acids after reaction. The carotenoids in rainbow trout were composed of 0.4% $\alpha$-carotene, 1.6% $\beta$ -carotene, 80% canthaxanthin, 7% lutein and 11% zeaxanthin, thus the canthaxanthin was the major component. This canthaxanthin was the most degraded carotenoid by lipoxygenase catalyzed co-oxidation during the reaction. On the other hand the tocopherol isomers found in the rainbow trout were $\alpha$ and $\beta$ -tocopherol, and $\alpha$-tocopherol had a higher degradation rate by the lipoxygenase catalyzed co-oxidation than of $\beta$-tocopherol in the reaction of model system.

• 한국재료학회지
• /
• 제24권5호
• /
• pp.236-242
• /
• 2014

Fabrication of reaction-bonded $Al_2O_3$ (RBAO) ceramics using Al-Zn-Mg alloy powder was studied in order to improve traditional RBAO ceramic processing using Al powder. The influence on reaction-bonding and microstructure, as well as on physical and mechanical properties, of the particulate characteristics of the $Al_2O_3$-Al alloy powder mixtures after milling, was revealed. Variation of the particulate characteristics of this $Al_2O_3$-Al alloy powder mixture with milling time was reported previously. To start, the $Al_2O_3$-Al alloy powder mixture was milled, reaction-bonded, post-sintered, and characterized. During reaction-bonding of the $Al_2O_3$-Al alloy powder mixture compacts, oxidation of the Al alloy took place in two stages, that is, there was solid- and liquid-state oxidation of the Al alloy. The solid-state oxidation exhibited strong dependence on the density of surface defects on the Al-alloy particles formed during milling. Higher milling efficiency resulted in less participation of the Al alloy in reaction-bonding. This was because of its consumption by chemical reactions during milling, and subsequent powder handling, and could be rather harmful in the case of over-milling. In contrast to very little dependence of oxidation of the Al alloy on its particle size after milling, the relative density, microstructure, and flexural strength were strongly dependent on particle size after milling (i.e., on milling efficiency). The relative density and 4-point flexural strength of the RBAO ceramics in this study were ~98% and ~365 MPa, respectively, after post-sintering at $1,600^{\circ}C$.

• 한국물환경학회지
• /
• 제38권5호
• /
• pp.211-219
• /
• 2022

In this study, the effect of liquid height/volume on sonochemical oxidation reactions was investigated in 300 kHz sonoreactors. The gas mixture of Ar/O₂ (50:50) was applied in two modes including saturation and sparging, and zero-order reaction (KI dosimetry) and first-order reaction (Bisphenol A (BPA) degradation) were used to quantitatively analyze sonochemical oxidation reactions. For the zero-order reaction, the highest sonochemical oxidation activity was obtained for the liquid height of 5𝛌, and the lowest height for both the gas saturation and sparging conditions. In addition, the sparging did not enhance the sonochemical oxidation activity for all height conditions except for 50𝛌, where very low activity was obtained. It was found that in sonochemiluminescence (SCL) images the sonochemical active zone was formed adjacent to the liquid surface for the gas sparging condition due to the formation of the standing wave field while the active zone was formed adjacent to the transducer at the bottom due to the blockage of ultrasound. For the first-order reaction, the highest activity was also obtained at 5𝛌 and the comparison based on the reactant mass was not appropriate because the concentration of the reactant (BPA) decreased significantly as the reaction time elapsed. Consequently, it was revealed that the determination of optimal liquid height (ultrasound irradiation distance) based on the wavelength of the applied ultrasound frequency was very important for the optimal design of sonoreactors in terms of reaction efficiency and reactor size.

• 대한안전경영과학회지
• /
• 제2권4호
• /
• pp.187-195
• /
• 2000

Electrochemical promotion of the reaction rate was investigated for CO oxidation in a solid electrolyte catalytic reactor where a thin film of Pt was deposited on the yttria stabilized zirconia as an electrode as well as a catalyst. It was shown under open circuit condition that potential was a mixed potential of $O_2$exchange reaction and electrochemical reaction induced by CO. The effect of electrochemical modification on the CO oxidation rate was studied at various overpotentials and $P_{CO}$$P_{O2}$.

• 한국세라믹학회지
• /
• 제31권7호
• /
• pp.767-771
• /
• 1994

In a salb-preheating furnace of steel-making industry, the oxidation/degradation behavior of Cr3C2 ceramic composited dkid button reaction with scale in Fe-oxide system occurs and was thermodynamically examined. The reaction of scale with Cr3C2 skid button produces Cr3C2(s) and C(s), and Co gas is then evolved from the reaction of C(s) with Fe-scale. Cr3C2(s) from oxidation of Cr3C2(s) reacted with Fe-oxide(s) becomes high-melting chromite. The chromite acts as protection layer against further oxidation and improves resistance of the reaction of Cr3C2 skid button with Fe-scale.

• 환경위생공학
• /
• 제18권4호
• /
• pp.45-51
• /
• 2003

This study was conducted to remove the color in dyeing wastewater by ozone oxidation process, and the results were summarized as follows ; The 18.3％ of BOD and 56.3％ TOC were removed as decreasing with pH 1 in dyeing wastewater, containing the polyester reducing process. It showed that terephthalic acid was precipitated at low pH. The color of dyeing wastewater was removed by the first order reaction, and the reaction rate constants at pH 3, 7, 12 were investigated $0.234{\;}min^{-1},{\;}0.215{\;}min^{-1}{\;}and{\;}0.201{\;}min^{-1}$ respectively. It showed that color was more effectively removed with direct reaction of ozone than radical reaction(non-direct reaction). As increasing of the water temperature, the reaction rate constants were increased slightly. It indicated that activity of ozone was improved at high water temperature.

• Bulletin of the Korean Chemical Society
• /
• 제27권8호
• /
• pp.1203-1205
• /
• 2006

During the synthesis of 4-fluorobenzaldehyde via the SNAr reaction of 4-nitrobenzaldehyde with TBAF, it was found that an equivalent amount of TBAF could oxidize benzaldehyde to benzoic acid. The reaction of 4-nitrobenzaldehyde with tetrabutylammonium fluoride (TBAF) gave 4-nitrobenzoic acid in high yield. Depending on the reaction conditions, other aromatic aldehydes produced acids with fewer amounts of alcohols. However, this type of oxidation has limited practical applications. Nevertheless, the mechanism is quite different from the Cannizzaro reaction because the amounts of the acid salt and alcohol formed were different.

• 한국염색가공학회지
• /
• 제23권4호
• /
• pp.274-283
• /
• 2011

Effect of pH on ozone oxidation and peroxone AOP(Advanced Oxidation Process) process was analyzed and the optimal efficiency for both processes was obtained at pH 7.5. In case of ozone oxidation process, the efficiencies of color, $COD_{Mn}$ and $BOD_5$ removal were measured to 93%, 70% and 89% at a reaction time of 50 min(ozone dosage of 111.67mg/$\ell$). When reaction time increased to 90 min(ozone dosage of 201mg/$\ell$), the efficiencies of color, $COD_{Mn}$ and $BOD_5$ removal were increased by 3~5 %, indicating that the increment of removal efficiency was insignificant considering longer reaction time. Similarly, the ozone/$H_2O_2$ ratio was optimized to 0.5 for peroxone AOP process. Removal efficiencies of color, $COD_{Mn}$ and $BOD_5$ were measured 95%, 81% and 94% at a reaction time of 50 min(ozone dosage of 111.67mg/$\ell$). When reaction time increased to 90min(ozone dosage of 201mg/$\ell$), the removal efficiency of color, CODMn, and BOD5 increased slightly by 1~5%.

• Applied Biological Chemistry
• /
• 제37권5호
• /
• pp.414-420
• /
• 1994

망간 산화물 birnessite, pyrolusite, hausmannite의 표면에서 일어나는 3가 크롬의 산화현상을 조사하였다. 이들은 zero point of charge, 표면적, 그리고 결정도 등에서 차이가 많은데, 크롬 산화현상은 모두 1차 반응이었으며 반응용액의 pH 및 최초 3가 크롬농도가 반응에 큰 영향을 미쳤다. 일반적으로 hausmannite에 의한 산화가 가장 빨랐으며 pyrolusite에 의한 산화는 상대적으로 매우 느렸다. 용액 pH와 최초 3가 크롬농도의 상호 작용이 전체 반응속도를 조절하는 것 같으며 pH가 높고 3가 크롬농도가 높을 경우 망간산화물 표면에 3가 크롬 침전되거나 complex를 형성할 수 있을 것이다. Birnessite와 hausmannite에서는 $pH\;3.0{\sim}5.0$ 범위에서 pH가 낮을수록 산화력이 높았으나 pyrolusite의 경우에는 pH가 높을수록 산화력이 증가하였다. 반응속도는 온도에 또한 민감했다. pH 3.0에서의 산화반응의 activation energies는 일반적으로 diffusion에 필요한 activation energy보다 크게 나타났으나 반응속도를 결정하는 단계가 무엇인지는 확실하지 않다.