• 상하수도학회지
• /
• 제7권2호
• /
• pp.24-33
• /
• 1993

The effects of chlorine dioxide on the oxidation of phenol and disinfection were studied in the various test water conditions. With the 0.3mg/l of chlorine dioxide dose, the spiked phenol(initial concentration: 0.1mg/l) was completely oxidized within 10 minute. The removal rate of phenol was much faster in distilled water than in ground water and filtered water. The applied dose of chlorine dioxide concentrations higher than 0.2mg/l was sufficiently enough for the complete oxidation of phenol. However, with 0.1mg/l of dose, chlorine dioxide can oxidize only 20% of the spiked phenol. The reactive substances present in test water may influence the chlorine dioxide demand in water. pH effect of oxidation rate was also investigated. Increasing the pH, the removal rate of phenol was found to be increased. The disinfection test of chlorine and chlorine dioxide were conducted and compared. The lethal effect for the both disinfectants are similarly powerful. The time for 99% inactivation of E. coli was obtained within 120 sec with the 0.2mg/l of each dose.

• Membrane and Water Treatment
• /
• 제13권4호
• /
• pp.191-199
• /
• 2022

In industrial production, the development of traditional polyamide nanofiltration (NF) membrane was limited due to its poor oxidation resistance, complex preparation process and high cost. In this study, a composite NF membrane with high flux, high separation performance, high oxidation resistance and simple process preparation was prepared by the method of dilute solution dip coating. And the sulfonated polysulfone was used for dip coating. The results indicated that the concentration of glycerin, the pore size of the based membrane, the composition of the coating solution, and the post-treatment process had important effects on the structure and performance of the composite NF membrane. The composite NF membrane prepared without glycerol protecting based membrane had a low flux, when the concentration of glycerin increased from 5% to 15%, the pure water flux of the composite NF membrane increased from 46.4 LMH to 108.2 LMH, and the salt rejection rate did not change much. By optimizing the coating system, the rejection rate of Na₂SO₄ and PEG1000 was higher than 90%, the pure water flux was higher than 40 LMH (60psi), and it can withstand 20,000 ppm.h NaClO solution cleaning. When the post treatment processes was adjusted, the salt rejection rate of NaCl solution (250 ppm) reached 45.5%, and the flux reached 62.2 LMH.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제25권1호
• /
• pp.62-73
• /
• 2020

PAHs commonly found in industrial sites such as manufactured gas plants (MGP) are potentially toxic, mutagenic and carcinogenic, and thus require immediate remediation. In-situ chemical oxidation (ISCO) is known as a highly efficient technology for soil and groundwater remediation. Among the several types of oxidants utilized in ISCO, persulfate has gained significant attention in recent years. Peroxydisulfate ion (S₂O₈^2-) is a strong oxidant with very high redox potential (E⁰ = 2.01 V). When mixed with Fe²⁺, it is capable of forming the sulfate radical (SO₄^-·) that has an even higher redox potential (E⁰ = 2.6 V). In this study, the influence of various iron activators on the persulfate oxidation of PAHs in contaminated soils was investigated. Several iron sources such as ferrous sulfate (FeSO₄), ferrous sulfide (FeS) and zero-valent iron (Fe(0)) were tested as a persulfate activator. Acenaphthene (ANE), dibenzofuran (DBF) and fluorene (FLE) were selected as model compounds because they were the dominant PAHs found in the field-contaminated soil collected from a MGP site. Oxidation kinetics of these PAHs in an artificially contaminated soil and the PAH-contaminated field soil were investigated. For all soils, Fe(0) was the most effective iron activator. The maximum PAHs removal rate in Fe(0)-mediated reactions was 92.7% for ANE, 83.0% for FLE, and 59.3% for DBF in the artificially contaminated soil, while the removal rate of total PAHs was 72.7% in the field-contaminated soil. To promote the iron activator effect, the effects of hydroxylamine as a reducing agent on reduction of Fe³⁺ to Fe²⁺, and EDTA and pyrophosphate as chelating agents on iron stabilization in persulfate oxidation were also investigated. As hydroxylamine and chelating agents (EDTA, pyrophosphate) dosage increased, the individual PAH removal rate in the artificially contaminated soil and the total PAHs removal rate in the field-contaminated soil increased.

• 대한환경공학회지
• /
• 제31권10호
• /
• pp.831-838
• /
• 2009

본 연구에서는 염소, 오존 및 오존/과산화수소 산화공정에서의 의약물질 3종의 제거특성을 살펴본 결과 diclofenac과 naproxen은 쉽게 산화공정에서 제거가 가능한 것으로 나타난 반면 ibuprofen의 경우는 산화공정에서 제거가 어려운 것으로 나타났다. 오존 단독공정 보다는 오존/과산화수소 산화공정에서의 의약물질의 제거효율이 높았으며, $H_2O_2/O_3$ 비가 1 이상에서는 제거율의 상승이 둔화되었다. 염소, 오존 및 오존/과산화수소 투입농도별 의약물질 3종에 대한 산화분해 속도 상수와 반감기를 살펴본 결과 염소, 오존 단독 투입에 비하여 오존/과산화수소 공정에서의 산화분해 속도상수가 높게 나타났고, 반감기는 단축되었다.

• 한국도시환경학회지
• /
• 제18권4호
• /
• pp.485-494
• /
• 2018

2017년 겨울철 인천에서 미세먼지($PM_{1.0}$)의 화학적 성분과 산화특성을 파악하였다. 측정기간 대기오염물질 농도는 $PM_{10}$ $46{\pm}22{\mu}g/m^3$, $PM_{2.5}$ $29{\pm}18{\mu}g/m^3$, $SO_2$ 5(${\pm}3$) ppb, CO 0.56(${\pm}0.24$) ppm, $O_3$ 21(${\pm}13$) ppb, $NO_2$ 28(${\pm}17$) ppb이었다. $PM_{1.0}$ 화학적 성분은 organic 성분이 $3.2{\mu}g/m^3$, nitrate $1.9{\mu}g/m^3$로 주요성분으로 나타났다. 주간과 야간에서 대부분 야간에 높은 농도를 나타냈다. 측정기간 NOR(nitrate oxidation rate)은 0.06 이었고, SOR(sulfate oxidation rate)은 0.11이었다. 고농도기간, NOR은 0.6까지 증가하였으며, nitrate 성분도 증가하였다. $NOx/SO_2$ 비는 평균 8.7이었으며, nitrate/sulfate 비율은 평균 2.1로서 측정지점에 위치한 발전소, 산업 보일러를 포함한 고정오염원과 이동오염원인 자동차로부터 배출된 NOx가 기여요인으로 작용한 것으로 판단된다.

• Corrosion Science and Technology
• /
• 제15권3호
• /
• pp.129-134
• /
• 2016

The effects of Ti on the high temperature oxidation of Ni-based superalloys were investigated by cyclic oxidation at $850^{\circ}C$ and $1000^{\circ}C$. The oxide scale formed at $850^{\circ}C$ consists of $Cr_2O_3$, $Al_2O_3$, and $NiCr_2O_4$ layers, while a continuous $Al_2O_3$ layer was formed at $1000^{\circ}C$. The oxidation rate of the alloy with higher Ti content was higher than the alloy with less Ti content at $850^{\circ}C$, possibly due to the increase in the metal vacancy concentration in the $Cr_2O_3$ layer involved by incorporation of $Ti^{4+}$. However, Ti improved the oxidation resistance of the superalloy at $1000^{\circ}C$ by reducing oxygen vacancy concentration in $Al_2O_3$ layer.

• 한국축산식품학회지
• /
• 제37권2호
• /
• pp.254-263
• /
• 2017

The inhibition effect of persimmon peel extracts (PPE) (0.05(PPE-0.05), 0.1(PPE-0.1), and 0.2 g(PPE-0.2) per meat sample) on lipid and protein oxidation of pork patties during chilled storage for 12 days were investigated and compared to ascorbic acid (As-0.05) and butylhydroxytoluene (BHT) (BHT-0.01). The meat samples treated with PPE had greater (p<0.05) $a^*$ values comparing control in raw pork patties meat from day 4 of storage. The addition of PPE at all concentrations on meat samples effectively inhibited the formation of oxidation products as shown by decreasing conjugated dienes (CD), peroxide values (POVs), thiobarbituric acid reaction substances (TBARS), and carbonyl content during chilled storage for 12 d. The PPE-0.2 and BHT-0.01 had the lowest in decrease rate of free thiol content (0.24 and 0.22 times) during chilled storage. Therefore, results of this study suggest that PPE can be considered a potential antioxidant against lipid and protein oxidation of raw meat products.

• 통합자연과학논문집
• /
• 제3권3호
• /
• pp.153-156
• /
• 2010

Oxidation behaviors of porous silicon were investigated by the measurement of area of $SiO_2$ vibrational peaks in FT-IR spectra during thermal oxidation of porous silicon at corresponding temperatures. Visible photoluminescent porous silicon samples were obtained from an electrochemical etch of n-type silicon of resistivity between 1-10 ${\Omega}/cm$. The etching solution was prepared by adding an equal volume of pure ethanol to an aqueous solution of HF. The porous silicon was illuminated with a 300 W tungsten lamp for the duration of etch. Etching was carried out as a two-electrode galvanostatic procedure at applied current density of 200 $mA/cm^2$ for 5 min. The porosity of samples prepared was about 80%. After formation of porous silicon, the samples were thermally oxidized at $100^{\circ}C$, $200^{\circ}C$, $300^{\circ}C$, and $400^{\circ}C$, respectively. The growth rate of $SiO_2$ layer of porous silicon was investigated by using FT-IR spectroscopy. The effect of oxidation of porous silicon was presented.

• 한국물환경학회지
• /
• 제30권6호
• /
• pp.653-657
• /
• 2014

Effects of $H_2O_2$ addition for fenton oxidation on iron coagulation for treatment of phosphorus species, such as orthophosphate, metaphosphate, pyrophosphate, organic phosphate, were investigated. The effects of coagulant dosage, hydrogen peroxide dosage and the combined sequence ferric coagulation and $H_2O_2$ addition for fenton oxidation and coagulation were studied. The characteristics of floc growth rate were monitored using the PDA. The removal efficiencies of phosphorus species by iron coagulation were increased as Fe/P molar ratio increased. However, the removal efficiencies of metaphosphate, pyrophosphate, organic phosphate by a ferric coagulation were not increased as Fe/P molar ratio increased. The removal efficiency of metaphosphate, pyrophosphate, organic phosphate was increased by using iron coagulation and $H_2O_2$ addition for fenton oxidation. The result indicated that non-reactive phosphorus after iron coagulation was changed to reactive phosphorus by $H_2O_2$ addition for fenton oxidation and the oxidized iron enhanced the coagulation efficiencies.

• 한국환경과학회지
• /
• 제4권5호
• /
• pp.115-115
• /
• 1995

Reuse of industrial effluents through the cooling systems in a petrochemical complex was described. The partial oxidation of the effluents from the biological treatment plant was examined, using Fenton''s reagent as a pretreatment step prior to a next treatment of the effluents. Next tertiary treatment using fixed-film reactor resulted in marked reductions in COD and suspended solids. The continuous fixed-film process with Fenton oxidation pretreatment showed a 23% increase in the COD removal efficiency when compared to that without pretreatment of Fenton oxidation under the volumetric organic loading rate of 0.1 kg COD/m3/day. The Fenton oxidation treatment seemed to be a possible method for tertiary biological treatment to reduce the residual toxicity with the enhanced biodegradation of the effluents.