• 한국세라믹학회지
• /
• 제22권6호
• /
• pp.5-8
• /
• 1985

Graphite has been oxidized to graphite hydrogen sulfate in concentrated $H_2SO_4$. Anodic oxidation and chemical oxidation of graphite in $H_2SO_4$ generally leads to the formation of intercalation compounds of the ionic salt type through incorporation of $H_2SO_4^-$ions and $H_2SO_4$ molecules into the graphite. Several other reactions also accur at various points of the charging cycle. But there is no satisfactory kinetics and mechanism of intercalationin graphite. We have studied them with anodic oxidation and chemical oxidation. We found six distinct phenomena between 2nd stage and 1st stage in chemical oxidation. We examined them in detail by the following in the measurements electrical oxidation. X-ray diffractions UV-Vis spectroscopy density measurements. We could obtained a equation for kinetic according to the reaction rate from this results and mechanism of intercalation between 2nd stage and 1st stage with hydrogen sulfate in graphite. Three thesis were written for the mechanism of intercalation compounds in graphite with hydrogen sulfate ; first thesis is anodic oxidation second thesis is chemical oxidation and definition of transit phase between 2nd etc the third thesis is the kinetic mechanism of intercalation compounds in graphite with Hydrogen sulfate. This thesis is the first paper among three thesis as anodic oxidation.

• International Journal of Automotive Technology
• /
• 제7권3호
• /
• pp.261-267
• /
• 2006

Understanding the mechanism of carbon oxidation is important for the successful modeling of diesel particulate filter regeneration. Carbon oxidation characteristics were investigated by temperature programmed oxidation(TPO) method as well as constant temperature oxidation(CTO) with a flow reactor including porous bed. The activation energy of carbon oxidation was increasing with temperature and had two different constant values in the early and the later stage of the oxidation process respectively in TPO experiment. Kinetic constants were derived and the reaction mechanisms were assumed from the experimental results and a simple reaction scheme was proposed, which approximately predicted the overall oxidation process in TPO as well as CTO.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.473-476
• /
• 2008

In this paper, we designed the main mechanism of high throughput device for rod-cuts of spent fuel. For this, we analyzed the mechanical methods(slitting, ball mill, roller straightening) and chemical methods(muffle furnace, rotary kiln). As the results, methods of ball drop and rotary drum for concepts design were selected in the analysis step. For enhancement of oxidation rate, we devised the blades on the reactor with mesh type. Also, for enhancement of decladding rate, we designed ball size and rotation reactor with mesh type and devised the vacuum system for fission products. Mechanisms of oxidation and recovery can simultaneously handle the rod-cuts of spent fuel and independently recover. The results of mechanism design can be used for scale-up of high throughput device.

• 분석과학
• /
• 제8권4호
• /
• pp.569-574
• /
• 1995

In-situ spectroelectrochemical studies have been carried out on the oxidation of Mn(II) at platinum, gold, lead dioxide, and bismuth doped lead dioxide electrodes. The Mn(III), $MnO_2$, and/or ${MnO_4}^-$ species are produced depending on experimental conditions employed during electrolysis. Mn(III) is shown to be produced from a very early stage during the anodic potential scan and undergo disproportionation-conproportionation reactions depending on the relative concentration of each species near the electrode surface. An oxidation mechanism consistent with these observations is proposed.

• Bulletin of the Korean Chemical Society
• /
• 제8권4호
• /
• pp.254-257
• /
• 1987

Palladium dichloro complexes catalysed the oxidation of cyclopentene by dioxygen in tetralin solvent at ambient temperature. Cyclopentanone formed mainly together with autoxidation products from both cyclopentene and tetralin. The oxidation seems to proceed by co-oxidation mechanism, where tetralin was first oxidized to its hydroperoxide which then oxidized cyclopentene to cyclopentanone. Mechanism of the other by-products formations has been discussed.

• Bulletin of the Korean Chemical Society
• /
• 제35권1호
• /
• pp.111-116
• /
• 2014

The kinetics and mechanism of oxidation of sulfanilic acid by N-chloro-p-toluene sulfonamide (chloramine-T) have been studied in acid medium. The species of chloramine-T were analysed on the basis of experimental observations and predominantly reactive species was taken into account for proposition of most plausible reaction mechanism. The derived rate law (1) conforms to such a mechanism. $$-\frac{d[CAT]}{dt}=\frac{kK_1[RNHCl][SA]}{K_1+[H^+]}$$ (1) All kinetic parameters were evaluated. Activation parameters such as energy and entropy of activation were calculated to be $(61.67{\pm}0.47)kJmol^{-1}$ and $(-62.71{\pm}2.48)kJmol^{-1}$ respectively employing Eyring equation.

• 분석과학
• /
• 제15권6호
• /
• pp.550-555
• /
• 2002

Cyclic voltammetry를 이용하여 boratabenzene의 산화반응을 연구하였다. (${\eta}^6$-1-Methylboratabenzene) (${\eta}^5$-pentamethylcyclopentadiennyl)iron 3을 모델분자로 하여 methanol 용매상에서 산화제 ($Hg(OAc)_2$, $HgSO_4$, $Cu(OH)_2$, $AgCF_3SO_3$, $FeCl_3$)와 반응시킴으로서 mechanism을 조사하였다. Boratabenzene 고리에 ortho proton이, boron에는 methyl기가 그르고 nucleophile로서 methanol이 존재할 때 반응은 비가역적으로 진행되었다. 중간 전이단계로 [3]을 거치는 것으로 추측되며, 우선적으로 6과 7이 생성되었고, 그 다음 6은 8로, 7은 9로 변환되어감을 알 수 있었다.

• 대한화학회지
• /
• 제56권1호
• /
• pp.28-33
• /
• 2012

The kinetics of ruthenium(III) chloride catalyzed oxidation of butanone and uncatalyzed oxidation of cyclohexanone by cerium(IV) in sulphuric acid medium have been studied. The kinetic rate law(I) in case of butanone conforms to the proposed mechanism. $$-\frac{1}{2}\frac{d[Ce^{IV}]}{dt}=\frac{kK[Ru^{III}][butanone]}{1+K[butanone]}$$ (1). However, oxidation of cyclohexanone in absence of catalyst accounts for the rate eqn. (2). $$-\frac{1}{2}\frac{[Ce^{IV}]}{dt}=\frac{(k_1+k_1K^'[H^+])[Ce^{IV}][Cyclohexanone]}{1+K_3[HSO_4^-]}$$ (2) Kinetics and activation parameters have been evaluated conventionally. Kinetically preferred mode of reaction is via ketonic and not the enolic forms.

• Environmental Analysis Health and Toxicology
• /
• 제14권3호
• /
• pp.121-126
• /
• 1999

The present paper describes a study of the photochemical kinetics and its oxidation mechanism of DBT. The photolysis of DBT in aqueous solution media have shown to have significant oxidation activities for the photolytic desulfurization of DBT. The oxidation effect was more pronounced in 4 % NaCl solution. A mechanism was proposed that the desulfurization process arise from the substution of sulfur by the hydroxyl radicals in different aqueous medium.

• Journal of Mechanical Science and Technology
• /
• 제20권1호
• /
• pp.1-12
• /
• 2006

This work reviews the effects of catalyst formulation and exhaust gas composition on soot oxidation in CDPF (Catalytic Diesel Particulate Filter). DOC's (Diesel Oxidation Catalysts) have been loaded with Pt catalyst (Pt/$Al_{2}O_3$) for reduction of HC and CO. Recent CDPF's are coated with the Pt catalyst as well as additives like Mo, V, Ce, Co, Fe, La, Au, or Zr for the promotion of soot oxidation. Alkali (K, Na, Cs, Li) doping of metal catalyst tends to increase the activity of the catalysts in soot combustion. Effects of coexistence components are very important in the catalytic reaction of the soot. The soot oxidation rate of a few catalysts are improved by water vapor and NOx in the ambient. There are only a few reports available on the mechanism of the PM (particulate matter) oxidation on the catalysts. The mechanism of PM oxidation in the catalytic systems that meet new emission regulations of diesel engines has yet to be investigated. Future research will focus on catalysts that can not only oxidize PM at low temperature, but also reduce NOx, continuously self-cleaning diesel particulate filters, and selective catalysts for NOx reduction.