• 한국식품과학회지
• /
• 제14권3호
• /
• pp.257-264
• /
• 1982

식용대두유에 공기를 다공성 가스 분산판을 통해서 주입(120ml/min)하면서 가열산화온도를 30에서 $180^{\circ}C$까지 변화시킬때(10시간)의 대두유의 일부 특성변화를 조사하였다. 그 결과는 다음과 같다. 본 실험에 사용된 대두유는 120ml/min의 공기주입 속도하에서는 그 과산화물값, TBA값과 요오드값은 가열산화온도가 $80^{\circ}C$를 넘을때 크게 증가했었다. 대두유의 지방산조성을 볼때 가열산화온도가 $80^{\circ}C$가 넘을때 불포화지방산의 함량의 변화는 컸었다. 그 반면에 포화지방산 함량의 변화는 거의 없었다. 이와같은 변화는 가열산화중의 대두유의 요오드값의 변화와 잘 일치 했었다. 한편, 산값은 가열산화온도가 $160^{\circ}C$를 넘을때 크게 증가했었다. 대두유의 굴절율과 점도는 가열산화온도와 시간이 증가함에 따라 증가했으나, 점도의 경우에는 가열 산화온도가 $180^{\circ}C$ 이상의 경우 크게 증가했었다. 본 실험의 가열산화조건하에서의 시료유지의 점도(V)와 가열 산화온도$(T^{\circ}K)$ 사이의 관계는 다음 식으로 표시할 수 있었다. $$V=Aexp({\frac{E}{RT}})$$ 여기서 A는 함수 E는 점성흐름의 활성화 에너지, R은 기체항수이다. 한편 $20^{\circ}C$에서 측정한 가열산화된 대두유의 굴절율$({n_D}^{20})$과 점도(V) 사이에는 다음과 같은 관계식이 성립하였었다. $${n_D}^{20}=1.4614+7.3333{\times}10^{-5}t+2.9612{\times}10^{-3}InV$$여기서 t는 점도측정온도$(^{\circ}C)$, InV는 점도의 자연대수치이다.

• 한국재료학회지
• /
• 제21권3호
• /
• pp.161-167
• /
• 2011

The stress-strain responses and oxidation properties of cold-rolled Zr-1.5Nb-O and Zr-1.5Nb-O-S alloys were studied. The U.T.S. (ultimate tensile strength) of cold-rolled Zr-1.5Nb-O-S alloy with 160 ppm sulfur (765 MPa) were greater than that of Zr-1Nb-1Sn-0.1Fe alloy (750 MPa), achieving an excellent mechanical strength even after the elimination of Sn, an effective solution strengthening element. The addition of sulfur increased the strength at the expense of ductility. However, the ductile fracture behavior was observed both in Zr-Nb-O and Zr-Nb-O-S alloys. The beneficial effect of sulphur on the strengthening was observed in the cold rolled Zr-1.5Nb-O-S alloys. The activation volume of cold-rolled Zr-1.5Nb decreased with sulfur content in the temperature region of dynamic strain aging associated with oxygen atoms. Insensitivity of the activation volume to the dislocation density and the decrease of the activation volume at a higher temperature where the dynamic strain aging occurs support the suggestion linking the activation volume with the activated bulge of dislocations limited by segregation of oxygen and sulfur atoms. The addition of sulfur was also found to improve the oxidation resistance of Zr-Nb-O alloys.

• 폴리머
• /
• 제25권3호
• /
• pp.435-440
• /
• 2001

본 연구에서는 일방향 탄소/탄소 복합재료에 산화억제제로 사용된 $MoSi_2$의 첨가량에 따른 복합재료의 부착력, 파괴인성 그리고 충격강도와의 관계를 고찰하였다. 산화억제제로 사용한 이규화 몰리브덴 (MoSi$_2$)은 복합재료의 내산화 특성을 향상시키기 위하여 각각 4, 12, 20wt%의 중량비로 페놀수지에 함침시켰다. 본 연구에 있어서 복합재료의 부착력은 접촉각 측정에 의한 Wilhelmy 방정식을 사용하여 계산하였다. 파괴인성과 충격강도는 임계 세기인자 측정을 위한 3점 굴곡 시험 방법과 Izod 충격시험에 의해 각각 측정하였다. 그 결과, $MoSi_2$가 첨가된 탄소/탄소 복합재료의 파괴인성과 충격강도는 증가하였다. 특허 l2wt%의 $MoSi_2$가 첨가된 복합재료가 London dispersive 요소($W_A\;^L$)의 증가에 의한 가장 큰 부착력을 나타내었으며, 이는 복합재료의 각 구성요소간의 계면결합력 증가에 따른 결과라 사료된다.

• 한국식품영양과학회지
• /
• 제27권3호
• /
• pp.399-405
• /
• 1998

This study was carried out to investigate the effects of herb extracts on lipid oxidation and free radical reaction in iron sources reacted with active oxygen species. The catalytic effects of active oxygen on lipid oxidation in oil emulsion tended to show more active in the order of OH, H2O2 and KO2. Herb extracts tended to show a little catalytic effect and active oxygen scavenging ability of herb extracts didn't show. But herb extracts played role as a strong chelating agents to bind iron if Fe2+ ion exist in oil emulsion. The contents of Fe2+ ion and total iron in Salvia miltiorrhiza Bge. and Angelica gigas Nakai were higher than those of Prunus persica Stockes and pinus strobus. The content of asocrbic acid in Pinus strobus showed the highest (26.97ppm) among several herb extracts. Electron donating abilities of Pinus strobus and Salvia miltiorrhiza Bge. were 79.54% and 77.11%, respectively, which were higher contents than those of Prunus persical Stokes and Angelica gigas Nakai. The SOD-like activity of Prunus persca Stokes showed 0.16 optical density (O.D), which means the most strong antioxidant activity among other herb extracts. The nitrite scavening effects tended to be different depending on pH. Pinus strobus and Angelica gigas Nakai showed 99.8% and 98.6% nitrite scavening effects at pH 1.2. And the effects were decreased as pH was increased. Especially, they didn't show the nitrite scavenging effect in pH 6.0. In conculsin, the Prinus strobus extract among herb extracts were the most effective antioxidant by evaluating several functional tests.

• 동력기계공학회지
• /
• 제17권1호
• /
• pp.110-115
• /
• 2013

The electrochemical performance and microstructure of Al-Si, Al-Si/C was investigated as anode for lithium ion battery. The Al-Si nano composite with 5 : 1 at% ratio was prepared by arc-discharge nano powder process. However, some of problem is occurred, when Al nano composite was synthesized by this manufacturing. The oxidation film is generated around Al-Si particles for passivating processing in the manufacture. The oxidation film interrupts electrical chemistry reaction during lithium ion insertion/extraction for charge and discharge. Because of the existence the oxidation film, Al-Si first cycle capacity is very lower than other examples. Therefore, carbon synthsized by glucose ($C_6H_{12}O_6$) was conducted to remove the oxidation film covered on the composite. The results showed that the first discharge cycle capacity of Al-Si/C is improved to 113mAh/g comparing with Al-Si (18.6mAh/g). Furthermore, XRD data and TEM images indicate that $Al_4C_3$ crystalline exist in Al-Si/C composite. In addition the Si-Al anode material, in which silicon is more contained was tested by same method as above, it was investigated to check the anode capacity and morphology properties in accordance with changing content of silicon, Si-Al anode has much higher initial discharge capacity(about 500mAh/g) than anode materials based on Aluminum as well as the morphology properties is also very different with the anode based Aluminum.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.89-92
• /
• 2007

Partail oxidation(POX) of n-butane was investigated in this research by employing ceria-promoted Ni/calcium hydroxyapatite catalysts ($Ce_xNi_{2.5}Ca_{10}(OH)_2(PO_4)_6$ ; x = $0.1{\sim}0.3$) which had recently been reported to exhibit good catalytic performance in POX of methane and propane. The experiments were carried out with changing ceria content, $O_2/n-C_4H_{10}$ ratio and temperature. As the $O_2/n-C_4H_{10}$ feed ratio increased up to 2.75, n-$C_4H_{10}$ conversion and $H_2$ yield increased and the selectivity of methane and other hydrocarbons decreased. But with $O_2/n-C_4H_{10}$ = 3.0, $n-C_4H_{10}$ conversion and $H_2$ yield decreased. This is considered due to that too much oxygen may inhibit the reduction of Ni or induce the oxidation of Ni, which results in poor catalytic activity. The optimum $O_2/n-C_4H_{10}$ ratio lay between 2.50 and 2.75. $Ce_{0.1}Ni_{2.5}Ca_{10}(OH)_2(PO_4)_6$ showed the highest $n-C_4H_{10}$ conversion and $H-2$ yield on the whole. In durability tests, higher hydrogen yield and better catalyst stability were obtained with the $O_2/n-C_4H_{10}$ ratio of 2.75 than with the ratio of 2.5.

• KSBB Journal
• /
• 제29권4호
• /
• pp.244-249
• /
• 2014

Biosynthesis pathway of medium-chain-length (MCL) polyhydroxyalkanoates (PHA) from fatty acid ${\beta}$-oxidation pathway was constructed in recombinant Escherichia coli by introducing the Pseudomonas sp. 61-3 PHA synthase gene (phaC2) and the maoC genes from Pseudomonas putida, Sinorhizobium meliloti, and Ralstonia eutropha. The metabolic link between fatty acid ${\beta}$-oxidation pathway and PHA biosynthesis pathway was constructed by MaoC, which is homologous to P. aeruginosa (R)-specific enoyl-CoA hydratase (PhaJ1). When the E. coli W3110 strains expressing the phaC2 gene and one of the maoC genes from P. putida, Sinorhizobium meliloti, and Ralstonia eutropha were cultured in LB medium containing 2 g/L of sodium decanoate as a carbon source, MCL-PHA that mainly consists of 3-hydroxyhexanoate (3HHx), 3-hydroxyoctanoate (3HO) and 3-hydroxydecanoate (3HD), was produced. The monomer composition of PHA and PHA contents varied depending on MaoC employed for the production of PHA. The highest PHA content of 18.7 wt% was achieved in recombinant E. coli W3110 expressing the phaC2 gene and the P. putida maoC gene. These results suggest that MCL-PHA biosynthesis pathway can be constructed in recombinant E. coli strains from the b-oxidation pathway by employing MaoC able to supply (R)-3-hydroxyacyl-CoA, the substrate of PHA synthase.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.766-772
• /
• 1996

Undoped $SnO_x$ thin films were deposited on Si(100) substrate by using reactive ioassisted deposition technique (R-IAD). In order to investigate the effect of initial oxygen content and heat treatment on the oxidation state and crystalline structure of tin oxide films, $SnO_x$ thin films were post-annealed at 400~$600^{\circ}C$ for 1 hr. in a vacuum ~$5 \times 10^{-3}$ -3/ Torr or were directly deposited on the substrate of $400^{\circ}C$ and the relative arrival ration ($Gamma$) of oxygen ion to Sn metal varied from 0.025 to 0.1, i.e., average impinging energy ($E_a$) form 25 to 100 eV/atom. As $E_a$ increased, the composition ratio of $N_ON{sn}$ changed from 1.25 to 1.93 in post-annealing, treatment and 1.21 to 1.87 in in-situ substrate heating. In case of post-annealing, the oxidation from SnO to $SnO_2$ was closely related to initial oxygen contents and post-annealing temperature, and the perfect oxidation of $SnO_2$ in the film was obtained at higher than $E_a$=75 eV/atom and $600^{\circ}C$. The temperature for perfect oxidation of $SnO_2$ was reduced as low as $400^{\circ}C$ through in-situ substrate heating. The variation of the chemical state of $SnO_x$ thin films with changing $E_a$'s and heating method were also observed by Auger electron spectroscopy.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.157-157
• /
• 2017

Titanium and its alloys that have a good biocompatibility, corrosion resistance, and mechanical properties such as hardness and wear resistance are widely used in dental and orthopedic implant applications. They can directly connect to bone. However, they do not form a chemical bond with bone tissue. Plasma electrolytic oxidation (PEO) that combines the high voltage spark and electrochemical oxidation is a novel method to form ceramic coatings on light metals such as titanium and its alloys. This is an excellent reproducibility and economical, because the size and shape control of the nano-structure is relatively easy. Silicon (Si), manganese (Mn), and magnesium (Mg) has a useful to bone. Particularly, Si has been found to be essential for normal bone, cartilage growth and development. Manganese influences regulation of bone remodeling because its low content in body is connected with the rise of the concentration of calcium, phosphates and phosphatase out of cells. Insufficience of Mn in human body is probably contributing cause of osteoporosis. Pre-studies have shown that Mg plays very important roles in essential for normal growth and metabolism of skeletal tissue in vertebrates and can be detected as minor constituents in teeth and bone. The objective of this work was to study nucleation and growth of bone-like apatite formation on Ti-6Al-4V in solution containing Mn, Mg, and Si ions after plasma electrolytic oxidation. Anodized alloys was prepared at 270V~300V voltages. And bone-like apatite formation was carried out in SBF solution for 1, 3, 5, and 7 days. The morphologies of PEO-treated Ti-6Al-4V alloy in containing Mn, Mg, and Si ions were examined by FE-SEM, EDS, and XRD.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.171-171
• /
• 2009

The electrodes are usually made of a porous mixture of carbon-supported platinum and ionomers. $SnO_2$ particles provide as supports that have been used for DMFCs, and it have high catalytic activities toward methanol oxidation. The main advantage of $SnO_2$ supported electrodes is that it has strong chemical interactions with metallic components. The high activity to a synergistic bifunctional mechanism in which Pt provides the adsorption sites for CO, while oxygen adsorbs dissociative on $SnO_2$. The reaction between the adsorbed species occurs at the Pt/$SnO_2$ boundary. The morphological observations were characterized by FESEM and transmission electron microscopy (TEM). $SnO_2$ particles crystallinity was analyzed by the X-ray diffraction (XRD). The surface bonded state of the $SnO_2$ particles and electrode materials were observed by the X-ray photoelectron spectroscopy (XPS). The electric properties of the Pt/$SnO_2$ catalyst for methanol oxidation have been investigated by the cyclic voltametry (CV) in 0.1M $H_2SO_4$ and 0.1M MeOH aqueous solution. The peak current density of methanol oxidation was increased as the $SnO_2$ content in the anode catalysts increased. Pt/$SnO_2$ catalysts improve the removal of CO ads species formed on the platinum surface during methanol electro-oxidation.