• Journal of the Korean Ceramic Society
• /
• v.33 no.8
• /
• pp.877-882
• /
• 1996

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2006.11a
• /
• pp.35.2-35.2
• /
• 2006

• Journal of the Korean Ceramic Society
• /
• v.27 no.2
• /
• pp.274-282
• /
• 1990

SnO2 powder was prepared by hydroxide method and oxalate method. In hydroxide method, the pH dependence of powder characteristics was investigated by using buffer solution. As increasing the pH of solution, SnO2 powder size was decreased because nucleation rate was inctreased by more supersaturation of solution. Also, we found that the powder by our method has larger specific surface area in comaprison with other method. And the degree of agglomeration of precipitate with the change of precipitation temperature was investigated in oxalate method. The SnC2O4 was angular shape precipitate, and the size of the SnC2O4 was increased with the increase of precipitation temperature in methanol solvent.

• Journal of Periodontal and Implant Science
• /
• v.29 no.1
• /
• pp.51-63
• /
• 1999

Exposure of the root surface due to gingival recession after periodontal surgery, elicit pain response when exposed to mechanical, heat, chemical or osmotic irritation. Especially patients treated with periodontal surgery, show high frequency. There have been reports that the 1 out of 7 patients complains of dentinal hypersensitivity. There have been many studies on the clinical effects of various materials on the treatment of dentinal hypersensitivity. The purposes of this study were to evaluate the effect of sodium chloride and potassium oxalate and to observe the relationship between the dentinal hypersensitivity and surface characteristics such as dentinal tubule size and number. This study included 20 teeth which were scheduled for extraction and had no pulpal disease. These teeth were divided into Root planing group, EDTA group, NaCl group and Oxalate group. Dentinal hypersensitivity is measured by tactile, pressured air and cold water using NRS (Numerical Rating Scales). Teeth were extracted under local anesthesia and each specimen was sectioned to a size about 3 X 5 mm and was examined under the scanning electron microscope (X2,000) The results were as follows, 1. The EDTA group exhibited significantly increased dentinal hypersensitivity comparing with the other groups. 2. The NaCl and Oxalate groups showed significantly reduced dentinal hypersensitivity comparing with the EDTA group. 3. As a method for dentinal hypersensitivity measurement, it was presumed thet tactile sensitivity test was not sensitive method but air blast test and cold water test were adequate method. 4. In a SEM study, the root planing group exhibited amorphous smear layer and showed no dentinal tubule orifice, but the EDTA group showed the large number of dentinal tubules. On the other hand, the NaCl and Oxalate groups did not show exposed dentinal tubules. The NaCl group showed more rough root surface than the EDTA group, and the Oxalate group showed many participates to be presumed as calcium oxalate particle. As the results from this study, root planing couldn't expose the dentinal tubule and NaCl and potassium oxalate occluded exposed dentinal tubule effectively. Dentinal hypersensitivity has close relationship with the exposure of dentinal tubules, especially with it's size and number.

• Analytical Science and Technology
• /
• v.14 no.1
• /
• pp.28-33
• /
• 2001

The ion chromatography for the separation of plutonium species which are suggested to be $Pu^{3+}$, $Pu^{4+}$, $PuO_2{^+}$ and $PuO_2{^{2+}}$ in natural water was studied. Two separation methods were performed; 1) two-column method containing each of $SiO^-$ and SiO-$SO_3{^-}$ cation exchanger, 2) IC with AG11 column and the eluent of oxalate/nitric acid. Separation conditions for $Eu^{3+}$, $Th^{4+}$, $NpO_2{^+}$, $UO_2{^{2+}}$ in place of plutonium species were acquired from preliminary tests. When these conditions were applied to separate the plutonium species, two-column method was separated them successfully. However, the IC method with oxalate eluent was difficult in the separation of plutonium species due to the change of $Pu^{3+}$ and $PuO_2{^{2+}}$ to $Pu^{4+}$ and $PuO_2{^+}$ respectively.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.37.1-37.1
• /
• 2010

The multi-component olivine cathode material, $LiMn_{1/3}Fe_{1/3}Co_{1/3}PO_4$, was prepared via a novel coprecipitation method of the mixed transition metal oxalate, $Mn_{1/3}Fe_{1/3}Co_{1/3}(C_2O_4){\cdot}2H_2O$. The stoichiometric ratio and distribution of transition metals in the oxalate, therefore, in the olivine product, was affected sensitively by the environments in the coprecipitation process, while they are the important factors in determining the electrochemical property of electrode materials with multiple transition metals. The effect of the pH, atmosphere, temperature, and aging time was investigated thoroughly with respect to the atomic ratio of transition metals, phase purity, and morphology of the mixed transition metal oxalate. The electrochemical activity of each transition metal in the olivine synthesized through this method clearly was enhanced as indicated in the cyclic voltammetry (CV) and galvanostatic charge/discharge measurement. Three distinctive contributions from Mn, Fe, and Co redox couples were detected reversibly in multiple charge and discharge processes. The first discharge capacity at the C/5 rate was $140.5\;mAh\;g^{-1}$ with good cycle retention. The rate capability test showed that the high capacity still is retained even at the 4C and 6C rates with 102 and $81\;mAh\;g^{-1}$, respectively.

• Journal of Preventive Medicine and Public Health
• /
• v.39 no.2
• /
• pp.165-170
• /
• 2006

Objectives : The determination of oxalate in urine is required for the diagnosis and treatment of primary hyperoxaluria, idiopathic stone disease and various intestinal diseases. We examined the possibility of using Fourier transform near-infrared (FT-NIR) spectroscopy analysis to quantitate urinary oxalate. The practical advantages of this method include ease of the sample preparation and operation technique, the absence of sample pre-treatments, rapid determination and noninvasiveness. Methods : The range of oxalate concentration in standard urine solutions was $0-221mg/{\ell}$. These 80 different samples were scanned in the region of 780-1,300 nm with a 0.5 nm data interval by a Spectrum One NTS FT-NIR spectrometer. PCR, PLSR and MLR regression models were used to calculate and evaluate the calibration equation. Results : The PCR and PLSR calibration models were obtained from the spectral data and they are exactly same. The standard error of estimation (SEE) and the % variance were $10.34mg/{\ell}$ and 97.86%, respectively. After full cross validation of this model, the standard error of estimation was $5,287mg/{\ell}$, which was much smaller than that of the pre-validation. Furthermore, the MCC (multiple correlation coefficient) was 0.998, which was compatible with the 0.923 or 0.999 obtained from the previous enzymatic methods. Conclusions : These results showed that FT-NIR spectroscopy can be used for rapid determination of the concentration of oxalate in human urine samples.

• Journal of the Korean Ceramic Society
• /
• v.36 no.7
• /
• pp.698-704
• /
• 1999

Li rich Li1+xMn2-xO4(x=0.07) spinel powders were prepared by an oxalate precipitation of wet chemical methods at temperature lower than $600^{\circ}C$. The FTIR results showed that the powders prepared at $600^{\circ}C$ had high degree of crystal quality comparing with the spinel powders prepared by solid state reaction at 75$0^{\circ}C$ which was the lowest synthesis temperature of the solid state reaction method. The particle size of powders prepared by the oxalate precipitation at $600^{\circ}C$ was smaller than 0.2${\mu}{\textrm}{m}$ and the specific surface area was 11.01 m2/g A heat treatment over 90$0^{\circ}C$ formed second phase in the precipitates. It was shown that there were phase transitions at temperatures. T1,T2 and T2. The transitions involved weight loss and gain during heating and cooling. The low temperature synthesis below $600^{\circ}C$ avoided the second phase formation and the prepared powders showed improved compositional and physical properties for secondary lithium battery applications.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.1
• /
• pp.46-55
• /
• 2002

10mo1% Gd$_2$O$_3$ doped CeO$_2$ fine powders were synthesized by the oxalate coprecipitation method. The characteristics and sintering behavior of fine powders were investigated. The oxalate precipitates had the specific surface area of 150$m^2$/g, and appeared to be fine and spherical primary particles with a size of approximately 5.5nm. The decomposition of the precipitates occurred from a temperature around 30$0^{\circ}C$ and it was completed below 40$0^{\circ}C$, resulted in the formation of the oxide. The calcination temperature of the fine powders was suitable at 77$0^{\circ}C$. By introducing fine powders washed with alcohol and ball-milling process after calcination, the sintered body was possible to attain the value of 97% of the theoretical density at low temperature of 130$0^{\circ}C$

• Journal of Power System Engineering
• /
• v.9 no.4
• /
• pp.124-129
• /
• 2005

Copper oxide, CuO, are very important components include of high temperature super- conductors, and widely used. The properties of sintered materials were affected by the size and shape of copper oxide with starting materials in the solid-phase reaction. A homogeneous and fine CuO powder was prepared by thermal decomposition of the copper oxalate precursor. Copper oxalate was precipitated by the addition of copper nitrate solution to an oxalic acid solution. The influence of various factors such as temperature, pH, concentration as well as ultrasonic irradiation in the solution were investigated.