• Title/Summary/Keyword: overlaps

Search Result 225, Processing Time 0.025 seconds

Simulative Investigation of Spectral Amplitude Coding Based OCDMA System Using Quantum Logic Gate Code with NAND and Direct Detection Techniques

  • Sharma, Teena;Maddila, Ravi Kumar;Aljunid, Syed Alwee
    • Current Optics and Photonics
    • /
    • v.3 no.6
    • /
    • pp.531-540
    • /
    • 2019
  • Spectral Amplitude Coding Optical Code Division Multiple Access (SAC OCDMA) is an advanced technique in asynchronous environments. This paper proposes design and implementation of a novel quantum logic gate (QLG) code, with code construction algorithm generated without following any code mapping procedures for SAC system. The proposed code has a unitary matrices property with maximum overlap of one chip for various clients and no overlaps in spectra for the rest of the subscribers. Results indicate that a single algorithm produces the same length increment for codes with weight greater than two and follows the same signal to noise ratio (SNR) and bit error rate (BER) calculations for a higher number of users. This paper further examines the performance of a QLG code based SAC-OCDMA system with NAND and direct detection techniques. BER analysis was carried out for the proposed code and results were compared with existing MDW, RD and GMP codes. We demonstrate that the QLG code based system performs better in terms of cardinality, which is followed by improved BER. Numerical analysis reveals that for error free transmission (10-9), the suggested code supports approximately 170 users with code weight 4. Our results also conclude that the proposed code provides improvement in the code construction, cross-correlation and minimization of noises.

Macro Block Placement Using Simulated Annealing (시뮬레이티드 어닐링을 이용한 마크로 블럭의 배치)

  • Park, In-Cheol;Kyung, Chong-Min
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.26 no.2
    • /
    • pp.147-154
    • /
    • 1989
  • An effective placement of macro blocks having arbitrary width and height is very important in reducing the chip area and the signal delay. In this paper, we proposed a method of macro block placement to obtain the globally optimal placement using simulated annealing, and an efficient algorithm for eliminating the overlaps between the rectangular macro blocks which may remain even after the simulated annealing process is terminated. Each macro block was enlarged to take into account minimal routing area, and these macro blocks were compacted as much as possible during the placement. This procedure was implemented in C language running on MV10000/UNIX computer system, and good placements were obtained by applying this procedure to two circuits which were consisted of 50 and 160 macro blocks respectively. Several parameters giving great effects to final placements were investigated.

  • PDF

Performance improvement of XCP-OFDM system using cross-handed circular polarization in frequency offset environments (주파수 오프셋 환경에서의 역선회 원편파를 이용한 XCP-OFDM 시스템의 성능 개선)

  • 김병옥
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.8 no.1
    • /
    • pp.49-56
    • /
    • 2004
  • An OFDM system using cross-handed circular Polarization(XCP-OFDM) is newly proposed in his paper. The proposed XCP-OFDM system divides the subchannels into a right-handed circular polarization(RHP channel and a left-handed circular polarization(LHCP) channel that alternate each other. Therefore, the overlaps between subcarriers in XCP-OFDM system can be reduced to a great extend compared to the conventional OFDM system. By this reason, it can improve the orthogonality and reduce the inter-channel interference due to frequency offset. In this paper, it can be seen that the proposed XCP-OFDM system shows robust against frequency offset.

A Study on Cubism Fashion Style Appearing in Modern Fashion: Focused on the 2010 S/S-2013 S/S Paris Collection (현대 패션에 나타난 큐비즘스타일패션 연구: 2010 S/S - 2013 S/S 파리컬렉션을 중심으로)

  • Choi, Yeree;Choi, Jeongwook
    • Journal of Fashion Business
    • /
    • v.18 no.2
    • /
    • pp.14-28
    • /
    • 2014
  • This study analyzed the group of experts who were related to cubism, selected among the works of 2010~2013 Paris Collection based on F.G.R.(Focus Group Research). According to the results of this study, there were appeared first, 'a one-piece dress' second, 'H silhouette' third, 'cotton', in case of item distribution and frequency. The analysis was done by using the manner of expression, cubical expression, exaggeration, distortion, dismantlement, geometrical division of face, mix-match look, wraparound repetition, asymmetric structure, etc. Based on the outcomes of the analysis on figurative design elements, this study adjusted three manners appearing on cubism fashion style. First, it was 'avant garde manner' of constitution or 'dismantlement' which was compiled into multi-view representations of overlaps and viewpoints by repetitive use of color tone trimming detail. Second, it was 'geomagnetic block placement' which expresses cubism with geometric partitioning of surface and separation of panel by cutting disintegration. Finally, it was 'distortion and simplification of silhouette' which is a distortion created by constitution-line pressed thin with silhouette. It maximizes the beauty of human body outline, which was distorted by three-dimensional-manipulation, and simplified by ellipsis for another shape for the extension or expansion of detail trimming.

An Application of Overlap Avoidance to Augment the Production Data in Pipe Installation Drawings (배관설치도 내 생산정보 증강을 위한 겹침 회피 알고리즘의 적용)

  • Hwang, InHyuck;Ruy, WonSun;Park, InHa;Park, JungSeo
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.53 no.5
    • /
    • pp.428-434
    • /
    • 2016
  • A lot of drawings for pipe construction and installation are needed to construct plant process system on the offshore plant structures. Depending on their scale or complexity, the required number of drawings related pipes sometimes amounts to several hundreds of thousands. Most major shipyards, therefore, have their own system which can automatically depict pipes’ geometric, manufacturing, and BOM(Bill of Material) information on the drawings. However, as the complexity and absolute quantity in the isometric region on the drawings is increased, the information extraction from the customized DB and positioning at the typical locations does not get to be enough to avoid the overlap between geometric contours, labels, and symbols. For this reason, the novel methods to arrange additional annotations without overlaps are presented in the paper. This approach is expected to increase the readability and legibility of the drawing and prevent the human error, and finally decrease the time-consuming and tedious jobs which are unnecessarily required to designers.

A Study on the Debris Flow Hazard Mapping Method using SINMAP and FLO-2D

  • Kim, Tae Yun;Yun, Hong Sic;Kwon, Jung Hwan
    • Journal of Korean Society for Geospatial Information Science
    • /
    • v.24 no.2
    • /
    • pp.15-24
    • /
    • 2016
  • This study conducted an evaluation of the extent of debris flow damage using SINMAP, which is slope stability analysis software based on the infinite slope stability method, and FLO-2D, a hydraulic debris flow analysis program. Mt. Majeok located in Chuncheon city in the Gangwon province was selected as the study area to compare the study results with an actual 2011 case. The stability of the slope was evaluated using a DEM of $1{\times}1m$ resolution based on the LiDAR survey method, and the initiation points of the debris flow were estimated by analyzing the overlaps with the drainage network, based on watershed analysis. In addition, the study used measured data from the actual case in the simulation instead of existing empirical equations to obtain simulation results with high reliability. The simulation results for the impact of the debris flow showed a 2.2-29.6% difference from the measured data. The results suggest that the extent of damage can be effectively estimated if the parameter setting for the models and the debris flow initiation point estimation are based on measured data. It is expected that the evaluation method of this study can be used in the future as a useful hazard mapping technique among GIS-based risk mapping techniques.

Isolation and Functional Analysis of spy1 Responsible for Pristinamycin Yield in Streptomyces pristinaespiralis

  • Jin, Qingchao;Yin, Huali;Hong, Xiaowei;Jin, Zhihua
    • Journal of Microbiology and Biotechnology
    • /
    • v.22 no.6
    • /
    • pp.793-799
    • /
    • 2012
  • A gene related to high pristinamycin yield in Streptomyces pristinaespiralis was selected by amplified fragment length polymorphism (AFLP) and its functions were investigated by gene disruption. First, a 561 bp polymorphic sequence was acquired by AFLP from high-yield recombinants compared with the S. pristinaespiralis ancestor ATCC25486, indicating that this approach is an effective means of screening for valuable genes responsible for antibiotic yield. Then, a 2,127 bp open reading frame of a gene designated spy1 that overlaps with the above fragment was identified and its structure and biological functions were investigated. In silico analysis of spy1 encoding a deduced 708-amino-acid-long serine/threonine protein kinase showed that it only contains a catalytic domain in the N-terminal region, which is different from some known homologs. Gene inactivation of chromosomal spy1 indicated that it plays a pleiotropic regulatory function in pristinamycin production, with a positive correlation to pristinamycin I biosynthesis and a negative correlation to pristinamycin II biosynthesis.

Hacking Path Retracing Algorithm using Packet Marking (패킷 마킹을 이용한 해킹경로 역추적 알고리즘)

  • 원승영;한승완;서동일;김선영;오창석
    • The Journal of the Korea Contents Association
    • /
    • v.3 no.1
    • /
    • pp.21-30
    • /
    • 2003
  • Retracing schemes using packet marking are currently being studied to protect network resources by isolating DDoS attack. One promising solution is the probabilistic packet marking (PPM). However, PPM can't use ICMP by encoding a mark into the IP identification field. Likewise, it can't identify the original source through a hash function used to encode trace information and reduce the mark size. In addition, the retracing problem overlaps with the result from the XOR operation. An algorithm is therefore proposed to pursue the attacker's source efficiently. The source is marked in a packet using a router ID, with marking information abstracted.

  • PDF

An Acoustic Study of Relative Articulatory Positions of English Vowels and Korean Vowels

  • Ahn, Soo-Woong
    • Speech Sciences
    • /
    • v.8 no.4
    • /
    • pp.171-184
    • /
    • 2001
  • American English vowels and Korean vowels were compared by the plotformant method. For American English vowels, six General American English speakers pronounced English words in the b_t environment. For Korean vowels eight Kyongsang dialect speakers and eight Seoul dialect speakers pronounced Korean words in the environments of k_t, p_t and t_t. The formant plots were obtained by plotting F1/F2 tokens of 13 American English vowels on the F1xF2 plane. In spite of personal variations the 13 vowel spaces of all six American English speakers maintained their relative positions with some overlaps. Clear distinctions were made between i-I, e-$\varepsilon$, u-$\sigma$, and o-c. The domain of c and $\alpha$ overlapped for three American English speakers, but it did not for three other speakers. The 8 Korean vowel spaces of Kyongsang dialect speakers and Seoul dialect speakers were very similar and maintained their relative positions. No distinction was made between e and $\varepsilon$. In contrast with American English e which is a neutral vowel, Korean e was a back vowel. The comparison of 13 American English vowel positions and 8 Korean Vowel positions is expected to shed some light on the errors of English vowel pronunciation of Korean learners.

  • PDF

Analysis of Intersymbol Interference due to Overlap m Overlap-Based DM-BPSK CSS Systems (오버랩 기반 DM-BPSK CSS 시스템에서 오버랩 횟수에 따른 심볼 간 간섭 분석)

  • Kim, Jun-Hwan;Lee, Young-Po;Song, Iick-Ho;Yoon, Seok-Ho
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.36 no.2C
    • /
    • pp.99-104
    • /
    • 2011
  • The chirp spread spectrum (CSS) technique spreads the data signal over a frequency bandwidth wider than minimum required bandwidth. By using time overlapping, the bit rate in CSS can be increased. However, for reliable transmission of data signal, the intersymbol interference (ISI) due to overlap should be analyzed. In this paper, the relation between the degree of overlap and ISI is analyzed in direct modulation binary phase shift keying CSS systems. In some cases, the overlap does not incur ISI at all and the ISI fluctuates or monotonically increases as the number of overlaps changes. It is also shown that the simulation results closely agree with the analytic results.