• The korean journal of orthodontics
• /
• v.36 no.3 s.116
• /
• pp.188-197
• /
• 2006

Fiber reinforced composite (FRC) is usually used as a connector joining a few teeth into one unit in orthodontics. However, fracture often occurs during the two to three years of the orthodontic treatment period due to repeated occlusal loading or water sorption in the oral environment. We simulated the repair by overlapping and attaching portions of two FRC strips in the middle and performed a three-point bending test to investigate the changes of the repair strength among the different FRC groups. The specimens were grouped according to the overlapping lengths of the two FRC strips, which were 1, 2, 3 and 4 mm (group E1, E2, E3 and E4, respectively) and the control group consisted of unrepaired, intact FRC strips. Each group consisted of 6 specimens and were cured with a light emitting diode curing unit. Group E4 showed the highest maximum loads of 2.67 N, then the control group (2.39 N), group E3 (2.35 N), E2 (2.10 N), and E1 (1.75 N) in decreasing order. Group E4 also showed the highest stiffness, which was 2.32 N/mm, however, the stiffness of group E3 (2.06N/mm) was higher than that of the control group (1.88 N/mm). According to the visual examination, the specimens tended to be bent rather than being fractured into two pieces with an increased length of overlapping portions. The above results suggest that a minimum overlapping length of 3 mm was necessary to obtain an adequate repair of a 10 mm length of FRC connector. In addition, the critical section adjacent to the joint area, where the thickness decreased abruptly, should be reinforced with flowable resin to minimize the bending tendency.

• Journal of Korean Society of Forest Science
• /
• v.97 no.2
• /
• pp.144-151
• /
• 2008

Using 8 isozyme polymorphic loci as gene markers, we studied the spatial distribution of genotypes in a naturally regenerated uneven-aged Eastern Siberian Fir (Abies nephrolepis Max.) stand (1ha, $100{\times}100m$) on Mt. Ohdae in northeastern South Korea. Gregorius' distograms and Moran's I correlograms revealed no evidence of significant genetic structure at three spatial classes of 5 m, 10 m, and 20 m. Extensive gene flow, due to the long distance dispersal of pollen and seeds in A. nephrolepis, may account for the lack of fine-scale spatial structure. Alternatives would be overlapping seed shadows caused by high densities of A. nephrolepis adult trees (160 trees/ha) and/or intraspecific competition resulting in extensive thinning within maternal half-sib groups.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.5
• /
• pp.656-662
• /
• 2018

Pattern matching algorithm is widely used in many application fields such as bio-informatics, intrusion detection, etc. Among many string matching algorithms, KMP (Knuth-Morris-Pratt) algorithm is commonly used because of its fast execution time when using large texts. However, the processing speed of KMP algorithm is also limited when the text size increases significantly. In this paper, we propose a high throughput parallel KMP algorithm considering CPU-GPU memory hierarchy based on OpenCL in GPGPU (General Purpose computing on Graphic Processing Unit). We focus on the optimization for the allocation of work-times and work-groups, the local memory copy of the pattern data and the failure table, and the overlapping of the data transfer with the string matching operations. The experimental results show that the execution time of the optimized parallel KMP algorithm is about 3.6 times faster than that of the non-optimized parallel KMP algorithm.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.42 no.6
• /
• pp.379-382
• /
• 2016

Cutaneous lymphoid hyperplasia (CLH) is a cutaneous pseudolymphoma with a worldwide distribution, equally affecting all races and ethnic groups. Due to its vast array of characteristics, it is most often missed in the differential diagnosis of firm to soft lumps on the head and neck. A systematic approach to the workup and diagnosis along with treatment of such lesions is discussed in this article. A 20-year-old Asian Indian female presented to our Oral and Maxillofacial unit with a lump on the left side of her forehead for 1 month. Local examination revealed a $2.5{\times}3.0cm^2$, well circumscribed swelling over the left para median region that was firm to doughy and non-tender. There was no other significant finding on general examination. Excisional biopsy of the lesion was performed, followed by histopathologic processing. The general etiology, pathogenesis, clinical presentation, differential diagnosis, clinical course, prognosis, treatment, and prevention have been discussed in line with the recent modalities of diagnosis and treatment of CLH. Due to the overlapping clinical and histological characteristics of CLH with many other lesions, it is important to consider this lesion in the differential diagnosis of cutaneous lesions.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.3
• /
• pp.327-338
• /
• 1994

KES-F system is widely used in hand evaluation, however, it has encountered some challenges, such as the overlapping of primary hand value, lack of predictability in case of women's thin dress, difficulties in communication due to complexity of primary hand expression and cultural differences in subjective evaluation. Therefore, this study was intended 1) to find out the Korean primary hand expressions(factors) of the overall concept of fabric hand associated with women's spring- fall dress fabrics, 2) to develope the fabric hand attributes of those fabrics and 3) to show whether there are any differences between Korean textile experts and non-experts in terms of the concept of fabric hand descriptors of hand attributes. Data base of hand descriptors were collected by extensive interview 60 experts and 10 non - experts using 110 spring-fall dress fabrics. Finally, hand of selected fabrics was assessed by 205 experts and 265 non-experts using 7-point scale of 26 descriptors based on the data base. Subjective ratings were analyzed by common factor analysis with varimax rotation. It was found that Korean primary hand expression indicated rather simple property, hence, did not equate exactly with Japanese experssion(e.g. koshi, shinayakasa, etc.) which contains several material properties. There were differences in stretch IE resilience, especially liveliness, between the judgement of non- ex- pert than to experts. Surface- related category was more important to non-experts than to experts. Slight differences were found between both groups in terms of preferred descriptors. Important descriptors as a rating scale were suggested.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.12
• /
• pp.5170-5188
• /
• 2015

This paper proposes a novel progressive secret image-hiding scheme based on the inpainting technique, the vector quantization technique (VQ) and the exploiting modification direction (EMD) technique. The proposed scheme first divides the secret image into non-overlapping blocks and categorizes the blocks into two groups: complex and smooth. The blocks in the complex group are compressed by VQ with PCA sorted codebook to obtain the VQ index table. Instead of embedding the original secret image, the proposed method progressively embeds the VQ index table into the cover images by using the EMD technique. After the receiver recovers the complex parts of the secret image by decoding the VQ index table from the shadow images, the smooth parts can be reconstructed by using the inpainting technique based on the content of the complex parts. The experimental results demonstrate that the proposed scheme not only has the advantage of progressive data hiding, which involves more shadow images joining to recover the secret image so as to produce a higher quality steganography image, but also can achieve high hiding capacity with acceptable recovered image quality.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.2
• /
• pp.330-336
• /
• 2004

Fifty-two pathogenic Vibrio parahaemolyticus strains were isolated from the environments of Busan and Yeosu, Korea. Forty-three of these strains showed protease activities, whereas 4 strains showed $\alpha / \beta$ hemolysin activities and 6 strains had urease activities. Their pathogenic factors were not overlapping except one strain, which had both protease and hemolysin activities. The 6 urease-positive strains (V. parahaemolyticus YKB4, YKB14, S25, YFB20, YFO21, and YFO22) showed the same biochemical characteristics as a reference strain [V. parahaemolyticus KCTC 2471 (urease-negative)], except for urease production. The 6 urease-positive strains showed different urease activities in their culture supernatant during the growth. The urease activity of S25 increased sharply at the late exponential phase, and was the highest at the initial stationary phase and was kept until the late stationary phase. The other 5 isolates, except C25, showed urease activities at the mid-stationary phase and increased steadily until the late stationary phase, when the urease activity was maximal. To compare the degree of virulence of V. parahaemolyticus with different pathogenic factors, hemolysin, protease, or urease-positive strains were injected into groups of 10 each of ICR mice (7- to l0-week-old males). The lethal rates of urease-positive V. parahaemolyticus, YKB14, YKB4, and S25, were significantly high, being 50, 70, and 80%, respectively. Protease-positive V. parahaemolyticus strains FM39 and FM50 showed 40% and 60% of lethal rate, respectively. Hemolysin-positive V. parahaemolyticus strains S34 and S72 had no mortality, similar to nonpathogenic V. parahaemolyticus FM12.

• Health Policy and Management
• /
• v.12 no.2
• /
• pp.1-22
• /
• 2002

Since the early 1980s scholars have applied latent structure and other type of finite mixture models from various academic fields. Although the merits of finite mixture model are well documented, the attempt to apply the mixture model to medical service has been relatively rare. The researchers aim to try to fill this gap by introducing finite mixture model and segmenting inpatients DB from one general hospital. In section 2 finite mixture models are compared with clustering, chi-square analysis, and discriminant analysis based on Wedel and Kamakura(2000)'s segmentation methodology schemata. The mixture model shows the optimal segments number and fuzzy classification for each observation by EM(expectation-maximization algorism). The finite mixture model is to unfix the sample, to Identify the groups, and to estimate the parameters of the density function underlying the observed data within each group. In section 3 and 4 we illustrate results of segmenting 4510 patients data including menial and ratio scales. And then, we show AHP can be identify the attractiveness of each segment, in which the decision maker can select the best target segment.

• Journal of Plant Biology
• /
• v.35 no.3
• /
• pp.253-257
• /
• 1992

Potyvirus group is the largest group among plant virus groups and damages severely plant hosts upon infectiQn. In order to investigate the mechanism by which potyviruses induce disease in plants, a cDNA clone 29-6 which is cOIlsidered to be a cDNA clone for garlic mosaic virus (GMV) was isolated. It did not hybridize to garlic latent virus genome, which is one of two major garlic viruses. Northern blot analysis shows that the genome size of garlic mosaic virus was about 9 kb. Clone 29-6 strongly hybridizes to poly(A) RNA isolated from garlic leaves, suggesting that GMV RNA is polyadenylated as other potyviruses. Nucleotide sequence analysis of cDNA clones overlapping with clone 29-6 showed that garlic plants are infected with various strains of garlic mosaic virus which are closely related to each other. other.

• Nuclear Engineering and Technology
• /
• v.50 no.1
• /
• pp.97-106
• /
• 2018

Improved load-following capability is one of the most important technical tasks of a pressurized water reactor. Controlling the nuclear reactor core during load-following operation leads to some difficulties. These difficulties mainly arise from nuclear reactor core limitations in local power peaking: the core is subjected to sharp and large variation of local power density during transients. Axial offset (AO) is the parameter usually used to represent the core power peaking. One of the important local power peaking components in nuclear reactors is axial power peaking, which continuously changes. The main challenge of nuclear reactor control during load-following operation is to maintain the AO within acceptable limits, at a certain reference target value. This article proposes a new robust approach to AO control of pressurized water reactors during load-following operation. This method uses robust feedback-linearization control based on the multipoint kinetics reactor model (neutronic and thermal-hydraulic). In this model, the reactor core is divided into four nodes along the reactor axis. Simulation results show that this method improves the reactor load-following capability in the presence of parameter uncertainty and disturbances and can use optimum control rod groups to maneuver with variable overlapping.