• Journal of Welding and Joining
• /
• 제15권5호
• /
• pp.92-103
• /
• 1997

The purpose of this study is to improve the wear resistance and hardness of Al alloy by making a formation of the thick surface hardening layers. The thick surface hardening layers were formed by PTAW(Plasma Transferred Arc Welding), with the addition of metal powders (Cu), ceramics powders (NbC, TiC), and mixture powders (Cu+NbC) in Al alloy (A1050, A5083). Mechanical properties of overlaid layers (wear resistance, hardness) were investigated in relation to the microstructure. The results obtained are summarized as follows: The depth of penetration was increased with increasing powder feeding rate. It is considered that these increase were due to the thermal pinch effect by the addition of powders, especially, for the Cu powders, were due to the heat of reaction with the matrix. The hardness and wear resistance of overlaid layers were improved with increasing powder feeding rate. For the Cu powders, it is considered that these increase were due to the increase of the formation of ${\theta}(CuAl_2)$ phase with increasing feeding rate of Cu powers.

• ETRI Journal
• /
• 제28권3호
• /
• pp.282-290
• /
• 2006

In vertically overlaid cellular systems, a temporary traffic concentration can occur in a hot-spot area, and this adversely affects overall system capacity. In this paper, we develop an adaptive hot-spot operating scheme (AHOS) to mitigate the negative effects from the nonuniform distribution of user location and the variation in the mixture of QoS requirements in orthogonal frequency division multiple access downlink systems. Here, the base station in a macrocell can control the operation of picocells within the cell, and turns them on or off according to the system overload estimation function. In order to determine whether the set of picocells is turned on or off, we define an AHOS gain index that describes the number of subcarriers saved to the macrocell by turning a specific picocell on. For initiating the picocell OFF procedure, we utilize the changes in traffic concentration and co-channel interference to the neighboring cells. According to computer simulation, the AHOS has been proved to have maximize system throughput while maintaining a very low QoS outage probability under various system scenarios in both a single-cell and multi-cell environments.

• 한국가구학회지
• /
• 제14권2호
• /
• pp.21-29
• /
• 2003

This study was carried out to investigate characteristics of plywood overlaid with softwood veneers densified by resin impregnation and compression. The resin impregnability of Korean pine veneer under atmospheric pressure soaking was greater than that of larch, and impregnability of melamine resin was slightly greater than phenolic resin. It was suggested that resin impregnation ratio was affected by density and thickness of veneer. The largest melamine resin impregnation ratio of 50.7% was obtained with 1.26mm thick Korean pine veneer, and the lowest phenolic resin impregnation ratio of 11.7% with 3.41mm thick larch veneer. Therefore, it was suggested that the vacuum-pres sure-soak treatment is required at thick larch veneer. In densifying resin-impregnated veneers, densification ratio from 13.4 to 31.2% was obtained by high pressure from 15.6 to $20.8kgf/cm^2$. Impregnation of melamine resin also showed relatively greater at densification than that of phenolic resin. So it showed the degree of densification of about 20% or greater. It was seemed that adhesive bonding strength of plywood(base panel) which was directly pressed and overlaid with resin-impregnated veneer was affected by resin tackiness after resin impregnation followed by semi-drying. In laboratory scale, melamine resin impregnation was more favorable for the development of adhesive bonding strength owing to moisture control.

• 한국환경복원기술학회지
• /
• 제13권5호
• /
• pp.28-37
• /
• 2010

This study is intend to evaluate natural conservation value, and to suggest natural park plan based on conservation value evaluation. In this study evaluation items are selected through related studies about ecological conservation evaluation, and evaluation items in this study can be classified into 2 aspects, ecological environment and topographic environment. After each evaluation items are overlaid with GIS program, management levels are derived from comprehensive overlaid maps of each evaluation items. Management areas can be classified into 5 levels; Critical Conservation Area, Conservation Area, Restoration Area, Passive Usable Area, Active Development Area and Settlement Area. So management areas can be matched each management levels to land use of natural park, that is district of preservation, district of natural environment, district of settlements and district of mass facilities. This study have good enough to evaluate ecological value for natural park plan, but, it is difficult to evaluate conservation value only with maps of each evaluation items, so it needs supplementary field survey for precise conservation value evaluation.

• 한국산학기술학회논문지
• /
• 제8권1호
• /
• pp.73-81
• /
• 2007

본 논문에서는 마이크로 셀과 매크로 셀이 중첩된 구조를 갖는 이동통신 환경에서 핸드오버의 성능을 분석하였다. 제안한 모델에서는 고속으로 이동하는 가입자를 마이크로 셀로 핸드오버하지 않고 매크로 셀로 핸드오버하는 경우의 성능을 분석하였다. 분석의 용이함을 위해 마이크로 셀과 매크로 셀의 모양은 원형이라고 가정하였다. 마이크로 셀에는 저속의 핸드오버 호를 위하여 큐를 두는 방식과 매크로 셀에는 고속의 핸드오버 호를 위하여 예약채널 할당방식을 적용하였다 해석적인 분석결과, 제안한 방식에서 새로운 호의 블러킹 확률의 증가는 미비하면서 랜드오버 실패 확률은 중첩되지 않은 셀 구조를 갖는 시스템에 비해 상대적으로 낮음을 알 수 있었다.

• 한국의류학회지
• /
• 제47권2호
• /
• pp.244-255
• /
• 2023

Patterns abstractly depicting flowing water with Chinese characters such as gong, wan(man), or wang continued endlessly and curved water patterns began appearing on textiles during the Song Dynasty. Though Song curved water patterns encompassed poetic sentiments such as "falling flowers and flowing water," the meaning faded with time, and these patterns were depicted in backgrounds with flowers added to brocade (Geum-sang-cheom-hwa). During the Ming and Qing Dynasties, combinations of diverse patterns, including flowers, butterflies, dragons, and auspicious treasures became fashionable, rather than the gong- and wan-shaped curved water patterns. Likewise, during the Joseon Dynasty, curved water patterns were preferred as background rather than as primary patterns. They were overlaid with flowers and clouds. The overlaid flower patterns included four-season flower patterns (17th-18th centuries), round flower patterns (19th century), and large flower patterns (20th century), which were identical to flower patterns fashionable at the time and arranged at intervals on complex curved water pattern backgrounds. In contrast, simple Ruyi types were more numerous than the four-Ruyi types fashionable at the time with regard to cloud patterns. Added here were Taiji (great ultimate symbol) or crane patterns, thus seeking to depict diverse auspicious Ruyi such as wish fulfillment and longevity.

• 한국도로학회논문집
• /
• 제9권2호
• /
• pp.63-76
• /
• 2007

본 연구에서는 콘크리트 포장에 덧씌우기를 하였을 때 다축차륜하중에 의한 응력분포특성을 분석하기 위하여 변환영역에서의 해석법을 개발하였다. 덧씌우기는 기존의 슬래브와 완전히 부착이 되었을 경우와 전혀 부착이 되지 않았을 때의 두 가지 극한 조건을 기준으로 분석을 하였다. 차륜하중은 복륜단축, 복륜복축, 복륜삼축 등 복륜다축하중을 고려하였으며 덧씌우기의 두께, 탄성계수, 포아송비 등이 응력분포에 미치는 영향을 분석하였다. 변환영역에서의 해석법을 이용하여 덧씌우기 포장을 분석하는 방법에 대하여 상세히 설명하였으며 해석결과의 정확성은 유한요소법을 이용한 해석결과와 비교하여 검증하였다. 해석을 수행한 결과 덧씌우기의 두께, 탄성계수, 포아송비의 증가는 기존 슬래브 하부의 최대인장응력을 감소시키며 감소 정도는 부착 덧씌우기가 비부착 덧씌우기에 비해 더 큰 것을 알 수 있었다. 또한 덧씌우기의 포아송비가 응력에 미치는 영향은 그리 크지 않은 것을 알 수 있었으며 부착과 비부착 덧씌우기 포장에서 덧씌우기의 두께 및 탄성계수의 증가에 따른 기존슬래브의 최대응력 감소특성도 분석하였다. 그리고 하중의 축수에 따른 부착과 비부착 덧씌우기 포장의 응력분포 및 최대응력특성도 분석하였다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.91-98
• /
• 2006

The purpose of this study is to investigate the opacity and printing strength of MG paper overlaid plywood. The printing strength of ink on MG paper can be evaluated effectively by a formula $E^{*2}=[(L^{*})^{2}+(a^{*})^{2}+(b^{*})^{2}]^{1/2}$ that we proposed. Higher E value indicates good printing strength of ink-on-paper. We also assess the real color of translucent printed MG paper with a formula CIE ${\bigtriangleup}E^{*}$ (color difference between a pile of same paper to be opaque and fancy paper laminated board). In addition, the color difference on paper surface caused by the color of wood-based board (bottom) can be evaluated by a formula of Pc. No. Generally, an acceptable appearance quality of fancy boards is ${\bigtriangleup}E^{*}$ <2.0 and small Pc.No. value. The experimental results showed that Japan-made MG papers -J1, J2 and J3 have better printing strength and gloss than that of Taiwan-made paper (T1). The reason for this was that Taiwan-made paper has poor printing strength and low gloss, which might be correlated to the fiber compositions in paper. Higher printing strength can be seen for short fiber containing handsheets when comparing to that of handsheets. Nonetheless, low-freeness sheets gives better printing strength than that of high-freeness sheets. High-opacity MG paper gives good opacifying effect to the fancy paper laminated wood-based boards. Comparing the surface color of 2 kinds of fancy paper laminated boards, paperboard T1 laminated with high-opacity fancy paper showed slight color difference. The same results can be seen for $??g/m^{2}$ handsheets. Higher-opacity Acacia and Eucalyptus bleached sulfate pulps (short fiber) gives higher opacifying effect on the plywood when comparing to Northan pine and Radiata pine sulfate pulps(long fiber). The former ones also showed small color differences when comparing the color differences between the color of fancy paper and laminated paper board. Additionally, the color of bottom plywood can't be shown through for the high-opacify surface paper adhered to. Besides, the PC No of the base paper laminated board is small as well. Apparently, we can add colorants to the binders for the manufscture of various handsheets ($30g/m^{2}$) with various pulp mix ratios to increase the opacity of paperboards to certain extents. When we using yellow and brown binders in paper laminated board, the color difference between Acacia and Eucalyptus handsheets overlaid boards decreasing to 2.0 (acceptable ${\bigtriangleup}E^{*}$ <2.0, hard to discern), but not much improvement for Northern and Radiata pines. Definitely, show-through defects can be discernible for lower opacity papers. In general, admirable printing strength of fancy paper by which glued to plywood can be made with high-opacity paper and colored binders techniques.

• 전자공학회논문지B
• /
• 제33B권6호
• /
• pp.136-148
• /
• 1996

In this paper, we analyze the traffic characteristics in microcell and macrocell overlaid PCS system which process voice and dta calls separately each others. in this system, data calls are delayed in queue when all of channels are occupied, while voice calls are bolcked in that case. For this, we calculated inter-microcell handoff area dwelling time distribution and handoff area dwelling time distribution between microcell and macrocell. We analyze traffic performance using this results. We used M/M/C/K model, and analyzed traffic performance of macrocell with handoff area variation of microcell.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 토목섬유 특별세미나
• /
• pp.35-38
• /
• 2000

Reflection cracks can be occurred in the asphalt layer overlaid on portland cement concrete pavements, because this layer is sensitive to environmental conditions including temperature changes and displacements of the pavement. A result of trial applications using glass fiber grids is introduced in this paper. Glass fiber grids were used between the asphalt layer and the concrete base to reduce the reflection crack of the asphalt layer. No cracks were observed in the glass grid installed area about 2 years later from trial constructions.