• Journal of Korea Water Resources Association
• /
• v.34 no.2
• /
• pp.155-167
• /
• 2001

The effects of bank crest width, slope steepness, soil properties, and soil compactness on the characteristics of levee breach due to overlfow were investigated through a series of experiments. Generally, the major factors influencing the breach phenomenon are compactness, soil properties. crest width, and slope steepness, in that order. Using proper soil, and ensuring enough compactness in bank construction are very essential for extending breach duration and reducing peak overflow ranges for the values of breach duration, breach width, width-to-depth ratio, and side slope of the breach section, proposed by Singh, MacDonald and Fread based on the field data for earth dam breaks were reasonable. We found that those criteria could also be applied to the phenomenon of levee breaching.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.191-200
• /
• 2011

Levee failure cause the huge amount of damage to human and property. Overflow and erosion of levee are primary cause of a break in a levee but the analysis of breach pattern and impact is partially inadequate. The flow characteristics of meandering rivers are very important in field of river hydraulics that should be studied in practical viewpoints relating to river levee. In meandering the secondary flow that rotary direction is changed reciprocally occurs in three dimension is known. In this study flow characteristics of local river are considered and of meandering channels are analyzed using CCHE2D and FLOW3D. The stability and accuracy of models are examined comparing the measuring and analyzed data for the experimental channel and natural river(Namgang). Consequently, the flow characteristics in a meandering river are suggested precisely and it is essential that river levees having meandering river should be analyzed.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.2
• /
• pp.1-6
• /
• 2012

The objective of this study is to analyze the flood inundation in a low-lying rural area. The study watershed selected for this study includes the Il-Pae and Ahn-Gok watersheds. It is located in the Namyangju, Korea and encompasses $3.64km^2$. A major flood event that occurred in July 2011 was chosen as the case for the flood inundation analysis. The Hydrologic Engineering Center's Hydrologic Modeling System (HEC-HMS) and River Analysis System (HEC-RAS) were used to simulate flood runoff and water surface elevation at each cross-section, respectively. The watershed topographic, soil, and land use data were processed using the GIS (Geographic Information System) tool for the models. The contribution to the total flood volume was estimated based on the results simulated by HEC-HMS and HEC-RAS. The results showed that the overflow discharge from the Il-Pae stream constituted 80% of the total flood volume. The contributions of rainfall falling directly on the inundation area and overflow discharge from the Ahn-Gok stream were 15 % and 5 %, respectively. The simulation results in different levee scenarios for the Ahn-Gok stream were also compared. The results indicated that the levee could reduce the flood volume a little bit.

• Journal of Korea Water Resources Association
• /
• v.49 no.9
• /
• pp.773-787
• /
• 2016

A coupled river-overland hydrodynamic model was applied to estimate flood risk by a scenario-based approach. The study area is Seongseo Industrial Complex in Daegu which is located near Nakdong river and Geumho river. Inundation depth and velocity at each time were calculated by applying a coupled 1D/2D hydrodynamic model to the target area of interest. The 2D inundation analysis for river and overland domain was performed with the scenario-based approach that there are levee overflow against 100/200 year high quantile (97.5%) design flood and levee break against 100/200 year normal quantile (50%) design flood. The level of flood risk was displayed for resident/industrial area using information about maximum depth and velocity of each node computed from the 2D inundation map. The research outcome would be very useful in establishing specified emergency action plans (EAP) in case of levee break and overflowing resulting from a flood.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.113-113
• /
• 2017

중소하천에서 홍수 시 보 주변 흐름은 잠수월류(submerged overflow)의 형태이고, 이러한 조건 하의 보 파괴원인 중 가장 큰 부분은 제방과의 연결부에서 발생하는 세굴로 인한 것이다. 그러나 하천설계기준(2009)에서는 보 연결부 보호공에 대해 수리학적 특성과 유사적 특성을 고려한 적절한 세굴 범위를 제시하지 못하고 있는 실정이다. 또한 기존의 연구들은 주로 고정상 실험결과를 이용하여 세굴범위를 제시하고 있으며, 제체의 재료적 특성을 고려한 연구가 상대적으로 미약한 실정이다. 이에 본 연구에서는 제체의 재료적 특성(점성을 가진 유사 특성)을 고려하여 잠수월류 시 보 하류부 제방의 세굴길이를 도출하였다. 본 연구방법으로 이론적 접근에서 보 연결부 세굴을 유발하는 주요인자들을 활용하여 관계식을 제안하였고, 수리실험을 통해 제안된 식의 검증을 수행하였다. 수리실험은 균일 사다리꼴 단면의 직선 수로($7.0m(L){\times}2.0m(B){\times}0.5m(H)$)에서 이동상 제방구간(2.0m)과 고정상 제방구간을 나누어 실험의 효율성을 높이고자 하였으며, 이동상 제방 전용 다짐판 및 다짐 봉 등 자체적으로 제작된 실험 장비들이 이용되었다. 실험결과와 제시된 이론적 접근의 비교를 통해 제시된 이론식이 제체의 다짐도의 영향이 고려가 되지 않았음을 가정하였으며, Lee et al.(2001)의 연구를 참고하여 제체에 대한 다짐의 영향을 고려한 후 두 값들이 선형적인 비례 관계가 나타남을 확인하였다. 최종적으로 이러한 관계를 모두 고려한 잠수월류 시 보 하류부 세굴길이에 대한 예측식을 제안하였다. 본 예측식은 하천 계획 및 설계시 호안의 범위를 산정하는데 참고자료로 유용할 것으로 판단된다. 향후에는 완전월류(perfect overflow)에서 보 연결부 세굴에 대한 연구를 수행하여, 월류 형태 별 제방 세굴길이에 대한 연구를 완성하고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1858-1862
• /
• 2008

최근에 발생하는 이상홍수로 인하여 설계규모를 초과하는 홍수가 발생하여 월류에 의한 제방붕괴 피해가 증가하고 있다. 초과규모의 홍수가 유하하더라도 월류에 의해서 제방이 붕괴되는 것과 붕괴되지 않고 단순히 월류하는 경우의 피해 정도는 매우 다른 양상으로 나타난다. 제방이 붕괴되는 경우, 제내지 유입량 및 유입기간의 증가로 인명 및 재산피해가 가중된다. 따라서 인구가 집중되고 재산이 밀집되어 있는 지역에 대해서는 제방붕괴에 의한 피해를 감소시키기 위한 특별한 대책이 필요하다. 본 연구에서는 기존 제방의 식생이 제방 월류 붕괴에 미치는 영향을 추정하기 위하여 수리실험을 수행하였다. 실험수로에 제작된 제방 뒷비탈에 인조식생을 부착시켜 유량에 따른 수심과 유속을 측정하였으며, 측정결과를 이용하여 조도계수를 산정하였다. 산정된 조도계수를 CIRIA(1987)의 보고서에 조도계수 산정 방법과 비교하고 분석하였다. 분석 결과, CIRIA(1987)에서 제시하고 있는 1V:2H제방의 조도계수 0.02보다 큰 값이 산정되었음을 알 수 있었다. 향후, 실제 식생에 대한 실험을 수행하여 흐름특성별 조도계수에 대한 추가적인 검토가 필요할 것으로 사료된다.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2002.08a
• /
• pp.134-143
• /
• 2002

우리나라의 경우 항만 및 어항의 개발시 항내의 정온 및 가동률 확보를 위해서 설치되는 방파제 등 외곽시설이 외해로부터의 침입파랑을 효과적으로 차단하고 있으나 한편으로는 이러한 구조물이 해수에 대하여 비투과성이므로 항만의 폐쇄성을 증대시켜 해수순환성이 저하되어 항만 수질오염이 악화되는 경향이 있다. 일반적으로 비투과성 방파제가 설치되면 항내 외간의 해수교환력이 떨어져서 오염물질 등이 항내에 머무르는 시간이 길어지므로 항내의 오염이 가속될 뿐만 아니라 오염원에 포함됨 유기물이 분해됨에 따라 항내 해수의 용존산소가 다량 소모되어 빈 산소상태를 야기시켜 항내의 수질에 부정적인 영향을 미친다. (중략)

• Journal of Korea Water Resources Association
• /
• v.48 no.12
• /
• pp.1077-1087
• /
• 2015

The levee protect lifes, houses, and properties by blocking overflow of river. The revetment is forced to be covered on the slope of levee in order to prevent erosion. The stability of revetment is very important enough to directly connected to the stability of levee. In this study, the weak points of revetment on meandering channel were found by movable revetment experiment and the velocity and the water surface elevation (WSE) were measured at main points. The 3-D numerical simulations were performed under same conditions with experiment. And unclear flow characteristics by the limit of measuring instruments were analyzed through numerical simulation. Consequently, the section of large wall shear stress and the failure section are almost the same. Despite of small wall shear stress, the revetments located at right bank were carried away because of circulation zone due to secondary flow by meandering. With existing riprap design formula, the sizes of riprap determined using maximum local velocity were 1.5~4.7 times greater than them using mean velocity. As a result of this study, it is necessary to calculate the size of riprap in other ways for meandering and straight channel. At a later study, if the weighted value considered the radius of curvature and shape of hydraulic structure is applied to riprap design formula, it is expected that the size of revetment was evaluated rationally and accurately.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.4
• /
• pp.14-30
• /
• 2015

This paper attempted to analyze the hydraulic effects that the dredging can take as an alternative to reduce possible damages of flooding due to the overflow of river levee in meandering rivers, where riverbed aggradation, seepage and erosion may occur. In order to make a hydraulic analysis in a section of meandering rivers, a two-dimensional hydraulic analysis model, RMA-2, was selected. The GIS was applied to construct two-dimensional finite element grids to consider the hydraulic conditions before and after dredging. The water surface elevations, depths, velocities, and tractive forces were compared before and after the dredging. The difference of water surface elevation between the inside and outside of river was turned out to be the maximum value of 0.58m under the design flood condition. It could be evaluated that the tractive force at the bank decreased about 42 to 67% on average for all the sections. These results could give valuable information that the dredging of the stream channel at the meandering sections decreased the risk of overflow, seepage and erosion of the banks. The methodologies given in this study will contribute to mitigating the flood damages in the surrounding farmlands.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.3
• /
• pp.88-100
• /
• 2009

An inundation analysis was performed on Hwapocheon, one of the tributaries of Nakdong River, which was inundated by heavy rain in August, 2002 with overtopping and levee break. The results of the developed model, 2D diffusion wave inundation analysis model, was compared with inundation trace map as well as inundation depth in terms of time and maximum inundated area calculated from FLUMEN model for the assessment of model applicability. The results from the developed model showed high fitness of 88.61% in comparison with observed data. Also maximum inundated area and spatial distribution of inundation zone were also found to be consistent with the results of FLUMEN model. Therefore, inundation zone and maximum inundation area calculated over a period of time by adopting 2D diffusion wave inundation analysis model can be used as a database for identifying high risk areas of inundation and establishing flood damage reduction measures.