• 한국환경과학회지
• /
• 제30권3호
• /
• pp.289-293
• /
• 2021

This study was conducted to investigate the distribution of duck production in duck housing as a function of the breeding period. The items in duck production distribution included body weight, feed intake, feed conversion ratio, and average duck production. All data were based on eight cycles (June and December, 2017; February, June, August, September, and November, 2018; February, 2019) at Farm Site 1 through 7. The most optimal results in the duck production distribution were observed at Site 1 for weight gain, feed intake, and feed efficiency. This could be explained by the fact that Site 1 was well managed in environmental improvement and sustainability. Based on these data, selective alternatives to improve duck production in duck farms are recommended as follows: first, proper management and recording of litter used as a flooring material are required, and second, continuous management such as temperature, relative humidity and ventilation is needed. Lastly, it is necessary to change duck facilities by introducing environmental management techniques. Furthermore, efforts to improve the overall facilities and management of duck breeding farms through additional field studies are needed in the future.

• 한국분무공학회지
• /
• 제28권3호
• /
• pp.150-155
• /
• 2023

Cold-start emissions are given great importance under the Euro-7 emission standard due to their significant impact on overall vehicle emissions. When an engine is started from a cold state, the combustion process is not yet optimized, leading to higher emissions. Hybrid vehicles, in particular, may face additional challenges, as their engine may remain inactive for extended periods, causing their catalysts to cool down and potentially become less effective in reducing emissions. In the present study, the performance of an electric heater was investigated as a means to enhance the catalyst heating during the start-up time. A simulation tool was utilized to develop a model for the gasoline exhaust aftertreatment system. The result indicates that the heater was able to increase the three-way catalyst temperature to 500℃ in 4 s using 20 kW power. In addition, the implementation of a secondary air supply resulted in reduced temperature overshoot and improved conversion efficiencies.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.64.2-64.2
• /
• 2010

In order to improve the overall power conversion efficiency in dye-sensitized solar cells (DSSCs), it is very important to secure the sufficient surface area of photocatalytic nanoparticles layer for absorbing dye molecules. It is because increasing the amount of dye absorbed generally results in increasing the amount of light harvesting. In this work, we proposed a new method for increasing the specific surface area of photocatalytic titanium oxide ($TiO_2$) nanoparticles by using an inorganic templating method. Salt-$TiO_2$ composite nanoparticles were synthesized in this approach by spray pyrolyzing both the titanium butoxide and sodium chloride solution. After aqueous removal of salt from salt-$TiO_2$ composite nanoparticles, mesoporous $TiO_2$ nanoparticles with pore size of 2~50 nm were formed and then the specific surface area of resulting porous $TiO_2$ nanoparticle was measured by Brunauer-Emmett-Teller (BET) method. Generally, commercially available P-25 with the average primary size of ~25 nm $TiO_2$ nanoparticles was used as an active layer for dye-sensitized solarcells, and the specific surface area of P-25 was found to be ~50 $m^2/g$. On the other hand, the specific surface area of mesoporous $TiO_2$ nanoparticles prepared in this approach was found to be ~286 $m^2/g$, which is 5 times higher than that of P-25. The increased specific surface area of $TiO_2$ nanoparticles will absorb relatively more dye molecules, which can increase the short curcuit current (Jsc) in DSSCs. The influence of nanoporous structures of $TiO_2$ on the performance of DSSCs will be discussed in terms of the amount of dye molecules absorbed, the fill factor, the short circuit current, and the power conversion efficiency.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권11호
• /
• pp.1540-1546
• /
• 2009

One hundred and forty-four piglets with an average birth weight of 1,672${\pm}$13.4 g were used to evaluate different feeding strategies for piglets reared from birth on a dummy sow. A 3${\times}$2 factorial experiment compared three nursing frequencies (1, 3 or 6 h intervals) and two feeding regimes (milk only, or milk combined with access to creep feed and water). The piglets which were nursed at one hour intervals had the lightest body weights at all days, and the poorest combined milk and creep feed dry matter conversion efficiency to piglet body weight gain in the second week. Piglets which were nursed at 3 h intervals had the heaviest body weight at day 15 and 22, but those nursed at 6 h intervals achieved similar body weight by days 29 (milk withdrawal) and 36. Piglets offered creep feed were observed to wean themselves before cessation of milk availability, and the timing of this self-weaning depended on the nursing frequency. The piglets nursed at one hour intervals weaned themselves between day 22 and day 29, those nursed at 3 h intervals weaned themselves between day 15 and day 22, whilst those nursed at 6 h intervals weaned themselves between day 8 and day 15. The piglets which were nursed at 6 h intervals had the highest total dry matter intake in weeks 3 and 4 when fed with milk, creep feed and water but not when fed milk only. They consequently had the poorest dry matter conversion efficiency in the fourth week and overall when fed with milk, creep feed and water, but not when fed milk only. It is concluded that the optimal management routine under these conditions is a 3 h nursing cycle with provision of supplementary creep feed and water.

• 한국재료학회지
• /
• 제30권2호
• /
• pp.68-73
• /
• 2020

Due to its favorable optical properties, Cu₂SnS₃ (CTS) is a promising material for thin film solar cells. Doping, which modifies the absorber properties, is one way to improve the conversion efficiency of CTS solar cells. In this work, CTS solar cells with selenium doping were fabricated on a flexible substrate using sputtering method and the effect of doping on the properties of CTS solar cells was investigated. In XRD analysis, a shift in the CTS peaks can be observed due to the doped selenium. XRF analysis confirmed the different ratios of Cu/Sn and (S+Se)/(Cu+Sn) depending on the amount of selenium doping. Selenium doping can help to lower the chemical potential of sulfur. This effectively reduces the point defects of CTS thin films. Overall improved electrical properties were observed in the CTS solar cell with a small amount of selenium doping, and a notable conversion efficiency of 1.02 % was achieved in the CTS solar cell doped with 1 at% of selenium.

• 한국방사선학회논문지
• /
• 제15권3호
• /
• pp.345-353
• /
• 2021

디지털 래디오그라피 이미징 시스템으로 환자의 병변 진단에 있어 도움을 줄 수도 있으나 인체에 입사되는 엑스선이 물질과의 상호작용으로 인해 산란선이 발생되면 엑스선 영상의 신호 및 노이즈 특성에 영향을 미치게 된다. 인체를 폴리메틸메타아크릴레이트(polymethyl methacrylate, PMMA)로 간주하고 PMMA에서 발생되는 산란선이 엑스선 영상에 미치는 특성을 관찰하기 위해 공간 영역에서 신호 및 노이즈 분석뿐만 아니라 공간주파수 영역에서 노이즈-파워 스펙트럼(noise-power spectrum, NPS) 그리고 제로주파수에서 양자검출효율(detective quantum efficiency, DQE)을 계산하였다. PMMA 두께 증가에 따라 신호는 감소, 노이즈는 증가하였으며 전반적인 공간주파수에서 노이즈-파워 스펙트럼의 저하가 확인되었다. 이러한 특성을 바탕으로 제로주파수 성능 또한 저하되는 결과를 보였다. 간접변환방식 검출기의 산란선에 의한 제로주파수 성능을 보다 정량적으로 분석하기 위해 몬테칼로 시뮬레이션과의 비교분석이 이루어져야 할 것이다.

• 생명과학회지
• /
• 제21권6호
• /
• pp.805-810
• /
• 2011

본 연구는 대나무 숯과 대나무 잎의 급여가 육계의 성장과 사료효율 및 육질에 미치는 영향을 조사하기 위해 30일간 각각 0.5%의 농도로 급여하였다. 시험결과, 대숯과 대잎 시험군에서 시험기간 중 사망률은 대조군에 비해 낮아진 반면, 출하 시 체중과 증체량은 대조군에 비해 유의성 있게 증가하였다. 또한 대조군에 비해 대숯과 대잎 시험군의 사료효율도 개선되었으며, 계육의 전단력은 대조군에 비해 유의성 있게 감소하였다. 대숯을 급여한 닭에서의 지방함량은 통계학적 차이는 없었으나 감소경향을 나타낸 반면, 대숯과 대잎을 급여한 닭에서의 불포화 지방산 비율은 증가경향을 나타내었다. 계육의 관능검사 결과, 대숯과 대잎 시험군의 선호도는 대조군에 비해 높게 나타났다. 혈액 및 혈청생화학 검사항목에서는 대조군과 시험군간에 유의성 있는 차이가 인정되지 않았다. 본 시험결과는 대나무 숯과 대나무 잎의 사료첨가 급여가 육계의 성장과 사료효율 및 육질을 개선시키는 것으로 나타났다. 본 연구결과는 사료첨가제로서 대나무 숯과 대나무 잎의 유용성과 개발가능성을 시사해 주고 있다.

• 대한기계학회논문집A
• /
• 제41권7호
• /
• pp.665-671
• /
• 2017

알칼리금속을 이용한 열전기변환장치(Alkali-Metal Thermal-to-electric Converter)는 열을 전기로 직접 변환하는 기술이다. AMTEC 기술은 기존 에너지기술 대비 고효율성과 고밀도성을 지니는 정적 에너지 변환 장치로서 이론 발전효율이 40%로 높고 단위발전량이 500 W/kg, $2.01W/cm^2$로 우수하다. AMTEC의 작동원리는 작동유체인 소듐이 분압차이에 의해서 고체전해질인 베타알루미나(BASE)의 내부에서 외부로 이온화를 거쳐며 통과하는데, 이때 전자를 주고 받으며 전기를 생성한다. BASE내외부의 분압차 형성을 위해서는 고온내구성과 기밀성이 높은 접합기술이 요구된다. 개발된 접합기술을 이용하여BASE/절연부/금속부 시스템의 안정적인 전기적/구조적 시스템을 구성하고 멀티-셀 모듈들을 제작하여 개방회로 전압과 전류-전압특성을 측정하는 방법으로 AMTEC 모듈전지들의 출력성능과 수명을 평가하였다.

• Bulletin of the Korean Chemical Society
• /
• 제32권5호
• /
• pp.1579-1582
• /
• 2011

Alumina particles wrapped in few-layer graphene sheets were prepared by calcining aluminum nitride powders under a mixed gas flow of carbon monoxide and argon. The graphene sheets were characterized by powder X-ray diffraction (XRD), Raman spectroscopy, electron energy loss spectroscopy, and high-resolution transmission electron microscopy. The few-layer graphene sheets, which wrapped around the alumina particles, did not exhibit any diffraction peaks in the XRD patterns but did show three characteristic bands (D, G, and 2D bands) in the Raman spectra. The dye-sensitized solar cell (DSSC) with the alumina particles wrapped in few-layer graphene sheets exhibited significantly improved overall energy-conversion efficiency, compared to conventional DSSC, due to longer electron lifetime.

• Bulletin of the Korean Chemical Society
• /
• 제31권1호
• /
• pp.125-132
• /
• 2010

Three organic sensitizers, JK-128, JK-129, and JK-130 containing quinoline unit are designed and synthesized. Under standard global AM 1.5 solar condition, the JK-130 sensitized solar cell gave a short circuit photocurrent density of 11.52 mA $cm^{-2}$, an open circuit voltage of 0.70 V, and a fill factor of 0.75, corresponding to an overall conversion efficiency of 6.07%. We found that the $\eta$ of JK-130 was higher than those of other two cells due to the higher photocurrent. The higher $J_{sc}$ value is attributed to the broad and intense absorption spectrum of JK-130.