• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.985-990
• /
• 1995

Recently, the development of high speed and high precision NC-lathe for piston head machining is needed for the complexity and diversity of the piston head shape used in automobile reciprocating engine. THe piston head has many complex shapes in the aspect of fuel economy, such as ovality, profile, double ovality and recess. Among them, for the maching of the over shape of 0.1~1mm the cutting tool should move periodically symchronized with the rotation of piston workpiece. The cutting tool feeed system must have high positioning accuracy for the precise machining, high speed for the fast maching and high dynamic stiffness for the cutting force. The linear brushless DC motor is used for satisfying these coditions. The ballbush guide and supporting guide using turcite is used for the guidance of the feed drive system. Linear encoder, digital servo ampllifer and controller are used for driving the motor. THis paper presents the design and simulation of the new tool feed system for noncircular machining.

• Asian-Australasian Journal of Animal Sciences
• /
• 제11권3호
• /
• pp.255-259
• /
• 1998

Sixteen Friesian Cows were allocated equally into 4 groups in a $4{\times}4$ Latin square design to evaluate the effects of utilizing bean by-products on the feed intake and milk production. Cows were fed on 4.5% of their body weight fresh alfalfa; the remainder of their requirements were covered by one of 4 experimental concentrate treatments: 1) commercial concentrate (CC), 2) 70% CC + 30% bean hulls (BH), 3) 70% CC + 30% Polished bean (PB) and 4) 70% CC+ 15% BH + 15% PB. Results showed that the inclusion of bean hulls at 30% improved (p<0.05) milk yield, 4% fat corrected milk yield, feed conversion ratio and fat percent of the milk over the other treatments. Feeding cows on a commercial concentrate plus 30% BH or 30% PB or 15% from each of BH and PB decreased the cost of feed per kg milk by 13.6, 2.5 and 1.3 %, respectively, lower than those fed on the commercial concentrate.

• 한국가금학회지
• /
• 제22권2호
• /
• pp.105-115
• /
• 1995

The balance of microbial populations in the gastrointestinal (GI) tract of all warm-blooded animals is critical to the maintenance of health and resistance to disease. The composition of the populations can be altered by diet and environment, making the host animal susceptible to disease, and reducing growth rate and feed efficiency. Some feed additives including antimicrobial agents, prohiotics or yucca extract have been used to promote growth and feed utilization. There is evidence that part of growth-promoting effect of those feed additives results from the suppression of microbial urease activity or ammonia production in the GI contents of animals. Over 200 microbial species have been known to produce urease and the product of urea hydrolysis, ammonia, is toxic to animals. Carefully tested probiotics or other urease-suppressing agents can be a possible alternative to antimicrobial agents including antibiotics as growth promotants used for animals feeds.

• 한국안전학회지
• /
• 제9권4호
• /
• pp.17-28
• /
• 1994

Chip breaking is important in lathe work for maintaining good surface of the products and safety of operator. The purpose of this study is to investigate the performance of chip breaking and chip shape resulted from the carbide inserts with grooved type and obstruction type chip breaker. Experiments have been performed under the following cutting conditions, (1) constant cutting speed with variable depth of cut and feed rate, (2) constant depth of cut with variable cutting speed and feed rate. Also, the flying distance of chip and it's distribution have been investigated. As a results, good performance of chip breaking can be obtained for small radius of curvature and land width of grooved type chip breaker. And the thickness of chip increase with the increase of feed rate and decrease of cutting speed, and the chip breaking becomes easier with the increase of chip thickness due to the large deformation rate. Obstraction type chip breaker shows better performance of surface roughness than the grooved type. The flying distance of the chips over 90% are less than 1 meter, and the distance decreases as the feed rate decreases.

• 한국정밀공학회지
• /
• 제12권2호
• /
• pp.23-34
• /
• 1995

This paper is concerned with effective and reliable tool breakage detection method using pattern characteristics of feed motor current in milling operations. Correlation coefficient is derived from the feature vector of signal for two consecutive which are extracted feed motor current over three spindle revolutions. The changing pattern of correlation coefficient is continuously compared to detect tool breakage and monitor cutting conditions. This proposed monitoring scheme is not affected by different tools, friction of motion, and varying cutting conditions and material shapes. Experimental results are presented to support the proposed monitoring scheme.

• 한국콘텐츠학회논문지
• /
• 제20권10호
• /
• pp.167-176
• /
• 2020

현재 국내에서 활용되고 있는 자동화된 어류 급이 장치는 특정 시간과 일정량의 사료를 시간에 맞추어 수조에 공급하는 방식이다. 이는 고령화되고 고가인 양식장 관리의 인건비는 줄일 수 있으나 양식 생산성에 결정적 요인이 되는 고가의 사료량을 지능적으로 적절히 조절하기는 매우 어렵다. 본 논문에서는 이러한 기존 자동급이 장치의 문제점을 해결하고, 양식장에서 어류의 성장률을 적절하게 유지하면서 사료 공급의 효율성을 극대화할 수 있는 퍼지추론 기반의 지능형 어류 자동 급이 모델인 FIIFF 추론 모델(Fuzzy Inference based Intelligent Fish Feeding Model)을 제안한다. 본 논문에서 제안하는 FIIFF 지능형 급이 추론모델은 양식어류의 현재 생육 환경 정보 및 실시간 활동 상태를 기반으로 급이량을 산출하기 때문에 사료 급이량 적절성이 매우 높다. 본 연구에서 제안한 FIIFF 추론 모델의 급이량 산출 실험 결과에서는 8개월 동안 양식장에서 실제 투입한 급이량보다 14.8%를 절감하는 효과를 보여준다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권5호
• /
• pp.666-672
• /
• 2000

Two experiments were conducted to determine the ileal digestibility of the amino acids contained in sunflower meal using the regression technique and then applying the values obtained, in a growth trial, using growing-finishing pigs. For the digestibility trial, four 20 kg crossbred ($Yorkshire{\times}Landrace{\times}Beijing$ Black) barrows were fitted with simple Tcannula in the terminal ileum. After recovery, the barrows were fed one of four experimental diets according to a $4{\times}4$ Latin Square design. The pigs were fed corn-soybean meal based diets supplemented with 0, 25, 50 or 75% sunflower meal. For the growth trial, 80 crossbred ($Yorkshire{\times}Landrace{\times}Beijing$ Black) growing pigs (21.5 kg) were fed corn-soybean meal diets supplemented with 0, 5, 10 or 15% sunflower meal. Five pens (2 gilts and 2 castrates) were assigned to each treatment. With the exception of arginine and valine, the digestibility coefficients for the indispensible amino acids declined as the level of sunflower meal in the diet increased. During both the growing (21.5-49.1 kg) and finishing (49.1-90.3 kg) periods and over the entire experiment (21.5-90.3 kg), average daily gain declined in a linear manner (p<0.05) with increasing amounts of sunflower meal. Feed intake was not significantly altered while feed conversion declined in a linear manner (p<0.05) during the grower period only. When the entire experimental period was taken into account, there would appear to be little penalty in either growth or feed conversion for including sunflower meal at levels up to 10% of the diet. Therefore, the price relationship between sunflower meal and other high-protein feedstuffs may provide an excellant opportunity for pork producers to use sunflower meal in order to reduce feed costs.

• Asian-Australasian Journal of Animal Sciences
• /
• 제2권1호
• /
• pp.1-6
• /
• 1989

Nutritive values and fermentation rates of rice straw treated with 3% anhydrous and 3% aqueous ammonia were evaluated both in vitro and sheep metabolism trials. Daily gain, feed efficiency and feed cost per gain were also determined with growing Holstein bulls fed anhydrous and aqueous ammonia treated rice straw. Crude protein was increased 2.4 fold and NDF was decreased 6.5%, but ADF and cellulose were not different between untreated and ammonia treated rice straw. An average of 35.5% of total added ammonia-N retained in the rice straw and other 64.5% was not retained in the rice straw. Ammonia treatment increased in vitro DM, NDF, ADF and cellulose digestibilities by 44.8%, 43.3%, 49.4% and 42.4%, respectively, and fermentation rates by 63.3%, 132.4%, 49.4% and 42.4%, respectively. In sheep metabolism trials, DM digestibilities of rice straw treated with anhydrous and aqueous ammonia were increased 22% and 36%, respectively, and digestible DM intakes by 48% and 70%, respectively in sheep fed anhydrous and aqueous ammonia treated rice straw over untreated rice straw. Rumen ammonia and blood urea were considerably higher in sheep fed ammonia treated rice straw than sheep fed untreated rice straw. Daily gain of Holstein bulls was increased 20.8% and 29.9% and rice straw intakes were increased 28.4% and 44.3% in anhydrous and aqueous ammonia treated rice straw over untreated rice straw. Feed conversion was improved 9.5% and 10.3% and feed cost/gain was reduced 7.1% and 9.2% respectively in anhydrous and aqueous ammonia treated rice straw group as compared with untreated rice straw group.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1032-1032
• /
• 2001

Artificial Neural Network (ANN) calibration techniques have been used commercially for agricultural applications since the mid-nineties. Global models, based on transmission data from 850 to 1050 nm, are used routinely to measure protein and moisture in wheat and barley and also moisture in triticale, rye, and oats. These models are currently used commercially in approx. 15 countries throughout the world. Results concerning earlier European ANN models are being published elsewhere. Some of the findings from that study will be discussed here. ANN models have also been developed for coarsely ground samples of compound feed and feed ingredients, again measured in transmission mode from 850 to 1050 nm. The performance of models for pig- and poultry feed will be discussed briefly. These models were developed from a very large data set (more than 20,000 records), and cover a very broad range of finished products. The prediction curves are linear over the entire range for protein, fat moisture, fibre, and starch (measured only on poultry feed), and accuracy is in line with the performance of smaller models based on Partial Least Squares (PLS). A simple bias adjustment is sufficient for calibration transfer across instruments. Recently, we have investigated the possible use of ANN for a different type of NIR spectrometer, based on reflectance data from 1100 to 2500 nm. In one study, based on data for protein, fat, and moisture measured on unground compound feed samples, dedicated ANN models for specific product classes (cattle feed, pig feed, broiler feed, and layers feed) gave moderately better Standard Errors of Prediction (SEP) compared to modified PLS (MPLS). However, if the four product classes were combined into one general calibration model, the performance of the ANN model deteriorated only slightly compared to the class-specific models, while the SEP values for the MPLS predictions doubled. Brix value in molasses is a measure of sugar content. Even with a huge dataset, PLS models were not sufficiently accurate for commercial use. In contrast an ANN model based on the same data improved the accuracy considerably and straightened out non-linearity in the prediction plot. The work of Mr. David Funk (GIPSA, U. S. Department of Agriculture) who has studied the influence of various types of spectral distortions on ANN- and PLS models, thereby providing comparative information on the robustness of these models towards instrument differences, will be discussed. This study was based on data from different classes of North American wheat measured in transmission from 850 to 1050 nm. The distortions studied included the effect of absorbance offset pathlength variation, presence of stray light bandwidth, and wavelength stretch and offset (either individually or combined). It was shown that a global ANN model was much less sensitive to most perturbations than class-specific GIPSA PLS calibrations. It is concluded that ANN models based on large data sets offer substantial advantages over PLS models with respect to accuracy, range of materials that can be handled by a single calibration, stability, transferability, and sensitivity to perturbations.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권12호
• /
• pp.1717-1725
• /
• 2000

The objective was to determine the relationship between feed intake levels and patterns, and growth performance and body composition of barrows and gilts using automatic feed intake recording equipment (F.I.R.E.). This system records the time of visits to the feeder and the duration and size of meals for individual animals housed in groups. Ninety-six crossbred pigs were grown from $33.4{\pm}0.51$ to $109.7{\pm}1.39kg$ live weight over a 13-week period. Eight mixed-sex groups of 12 pigs were used and 4 dietary treatments were compared giving 2 pens per treatment. The dietary treatments consisted of corn-soybean meal diets with differing protein levels which ranged from 14.7% to 19% between 30 to 55 kg, from 13.3% to 16.9% between 56 and 85 kg, and from 12.3% to 16.8% for the remainder of the study. Animals were ultrasonically scanned to measure loin-eye area and backfat thickness to estimate carcass fat-free lean content at the beginning and end of the study. Barrows had higher daily feed intake than gilts (2.67 vs. 2.46 kg resp. p<0.05) which was the result of a longer feeder occupation time per visit (4.77 vs. 4.54 min, resp. p<0.05), higher feed consumption rates (30.4 vs. 29.0 g/min, resp. p<0.05), and higher feed intakes per visit (136.9 vs. 126.8 g, resp. p<0.01). Gilts had less backfat and greater loin-eye area than barrows (p<0.05). Diet had no significant effect on growth performance and had limited impact on feeding patterns. Body weight showed high correlations with ADG (r=0.74), feed intake per visit (r=0.51) and feed consumption rate (r=0.69). Positive correlation were also found between daily feed intake and feed intake per visit (r=0.45), feeder occupation time per day (r=0.56), and feed consumption rate (r=0.55), and between daily feed intake and backfat thickness (r=0.32) and feed consumption rate and loin-eye area (r=0.32). There were negative correlations between number of feeder visit per day and daily feed intake (r=-0.54), and between feed intake per visit and number of feeder visits per day (r=-0.43). However, correlations between feed intake traits and carcass traits were generally low. Visits to the feeder were greatest during the morning (0700 to 1100 h) and lowest during the evening and nighttime. These results highlight limited variation among the sexes in feeding patterns and suggest important relationships between feeding behavior and feed intake.