• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.22-24
• /
• 1974

1. Object and importance of the research. The exports of plywood are increasing annually and it has ranked first in the world market because of the high quality product developed and manufactured using modern techniques. However, it is known that the exports of the other wood products, except plywood, is inactive because of their low quality. Accordingly, to increase the exports of various wood products investigations were carried out on kiln drying techniques to improve the quality of the wood. 2. The details and scope of the research Wet wood should be kiln dried before use to prevent various drying defects such as distortion, shrinkage etc, which would develop after processing, and also wet wood is not suitable for cutting, gluing and finishing. Therefore, the kiln drying properties of lumber from such species as Persimmon, Oak, Ramin and Meranti which are used in large quantity for manufacturing exporting wood products have been studied. Also the real state of kiln drying industry in Korea was investigated. 3. Results and proposal for practical use of the research 3. 1 Results of the research 3.1.1 The end checks and the time for drying from intial moisture content of about 40 percent to 5 percent moisture content in ovendry were investigated as Table 1. 3.1.2 The kiln dried results, for 30mm stock, which are presented by using kiln schedule Table 2 are as Table 3. 3.1.3 The kiln schedule for Persimmon which has a normal drying properties is given in Table 4. However, the persimmon which has easy checking properties should be air dried under a relative humidity of above 85% until reaching about 25 percent moisture content. 3.1.4 The kiln schedules for ramin, meranti and oak are given respectively as follows. Ramin kiln schedule ............ Table 5 and Table 6 Meranti kiln schedule ............ Table 7 Oak kiln schedule ............ Table 8 3.2 Proposal for practical use of the research Firms using the above species should be informed the results of the research so they can be used to preventing drying defects and shortening drying time.

• Journal of Korean Society of Forest Science
• /
• v.77 no.2
• /
• pp.252-257
• /
• 1988

This study was carried out to investigate the physical and mechanical properties of sawdust boards combined with sycamore and polypropylene-net flakes. Both the sycamore and polypropylene-net flakes were adjusted to the sizes of $1.0{\times}1.0$, $1.0{\times}2.0$, and $1.5{\times}1.5cm^2$ and these flakes were mixed at 1, 2, 3, and 4% levels based on ovendry weights of sawdusts, respectively. The results obtained in this study were summarized as follows : 1. Thickness swellings of sawdust boards combined with sycamore flakes decreased with the increase of mixture levels and similar effects were also recognized in combination with polypropylene-net flakes. 2. Moduli of rupture both in sawdust boards combined with sycamore and polypropylene-net flakes increased with the increase of their mixture levels, and sawdust boards combined with sycamore flakes of $1.0{\times}2.0cm^2$ size and polypropylene-net flakes of $1.5{\times}1.5cm^2$ size showed higher moduli of rupture than control boards. 3. Moduli of elasticity both in sawdust hoards combined with sycamore and polypropylene-net flakes increased with the increase of their mixture levels as in moduli of rupture. 4. The physical and mechanical properties of sawdust boards combined with sycamore and polypropylene-net flakes were mainly dependent on aspect ratio of sycamore flakes and size of polypropylene-net flakes respectively, and these properties were improved with the respective increase of aspect ratio and size.

• Journal of Korean Society of Forest Science
• /
• v.87 no.2
• /
• pp.276-285
• /
• 1998

The aboveground biomass and nutrient content (N, P, K, Ca and Mg) of Pinus koraiensis S. et Z., aged 9, 22, 34, 46, 66 years, were measured in the Experiment Forest of Kangwon National University of Kangwondo province. The site index of the stands ranged from 13.5 to 14.2. Allometric equations (logY=alogX+b, where Y, X is ovendry mass and DBH, respectively) relating dry weights of stem, branches and needles to diameter at breast height (DBH) were developed to estimate aboveground tree biomass. Total above ground tree biomass increased with stand age from $21.8t\;ha^{-1}$ in the 9-year-old stand to $130t\;ha^{-1}$ in the 66-Year-old stand. Aboveground biomass was allocated as follows : stem> branch > foliage, except for the 9-year-old stand which had a greater proportion of foliage biomass than branch biomass. As stand age increased, an increasing proportion of annual biomass increment was allocated to stems. The aboveground biomass of shrubs and herbs ranged from 0.4 to $3.9t\;ha^{-1}$ and from 0.05 to $0.6t\;ha^{-1}$, respectively. No relationship was found between aboveground understory biomass and stand age. The mass of woody debris and forest floor varied between 0.59 to $1.54t\;ha^{-1}$ and 6.0 to $21.63t\;ha^{-1}$, respectively. Nutrient accumulation in aboveground tree biomass increased with stand age and was in the order of N > Ca > K > P > Mg. Average rates of nutrients accumulation in biomass were greatest in the early stages of stand development, and less marked as stand aged. The nutrient concentrations in different tree components decreased in the order of needle > branch > stem. There were no detectable trends in nutrient content of the forest floor and mineral soils with stand age. Understory vegetation contributed little to the nutrient pool of these Korean pine ecosystems. Mineral soil contained the Breast proportion of nutrient capital of the various ecosystem compartments.

• Journal of Korean Society of Forest Science
• /
• v.55 no.1
• /
• pp.30-36
• /
• 1982

Wood biomass production at 1-year, 2-year, and 3-year rotations on both low and upper hills at 2m 2m spacing (25,000 trees/ha) was studied for a six-year period with following 12 species; Lespedeza cyrtobotrya Amorpha fruticosa. Robinia pseudoacacia, Acer saccharinum, Platanus orientalis Populus alba ${\times}$ P. glandulosa $F_1$, Salix alba, Pinus rigida, Alnus hirsuta var. sibirica, A. inokumai A. gultinosa, and A. incana. In One-year rotation, Lespedeza cyrtobotrya produced largest amoung of biomass (2.6 t/ha/year, fresh weight) and Populus alba ${\times}$ P. glandulosa $F_1$ the second largest (2.2 t/ha/year) on low hill. In two-year rotation, the latter produced the largest amount (4.8 t/ha/year) and Alnus hirsuta var. sibirica second largest (2.8 t/ha/year) on low hill. In three-year rotation, the largest weight (11.2 t/ha/year) was produced by Robinia pseudoacacia and the second largest (6.2 t/ha/year) by Alnus hirsuta var. sibirica on low hill Amorpha fruticosa, Acer saccharinum, Platanus orientalis and Salix alba were not suitable for biomass or fuelwood productio due to poor growth. Biomass yield on upper hill was reduced considerably for all tewlve species, with less than 4 t/year at maximum Only nitrogen fixing species (Robinia and Alnus species) are recommended on upper hill for biomass production wood sprouting ability of species was generally associated with good biomass production. Calori values of ovendry wood ranged from 4,485 cal/g for Salix alba to 5,125 cal/g for Alnus glutinosa. For maximum biomass production a three-year ratation with coppice is preferred to one-year and two-year roataions The best species appeared to be Robinia pseudoacacia and Alnus hirsuta var sibirica.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.4
• /
• pp.3-57
• /
• 1985

This research was conducted to examine the feasibility of developing fire retardant particleboard and complyboard. Particleboard were manufactured using meranti particle(Shorea spp.)made with Pallmann chipper, and complyboard meranti particle and apitong veneer (Dipterocarpus spp.). Particles were passed through 4mm (6 mesh) and retained on 1mm (25 mesh). Urea formaldehyde resin was added 10 percent on ovendry weight of particle. Face veneer for complyboard was 0.9, 1.6 and 2.3mm in thickness and spread with 36 g/(30.48 cm)$^2$ glue on one side. Veneers were soaked with 10 percent solution of five fire retardant chemicals (diammonium phosphate, ammonium sulfate, monoammonium phosphate, Pyresote and Minalith), and particles with 5, 10, 15 and 20 percent solution of five chemicals. Particleboard and complyboard were evaluated on physical and mechanical properties, and fire retardancy. The results obtained were summarized as follows. 1. Among five fire retardant chemicals treated to particleboard and complyboard, the retention of ammonium sulfate in 5 percent solution showed the lowest as 1.39 kg/(30.48 cm)$^3$ exceeding the minimum retention of 1.125 kg/(30.48 cm)$^3$ recommended by Forest Products Laboratory and Koch. 2. Particleboard and complyboard treated with diammonium phosphate showed higher modulus of rupture (MOR), modulus of elasticity (MOE), internal bond strength and screw holding power than those with the other chemicals. 3. MOR and MOE of complyboard treated with fire retardant chemicals were greater than those of fire retardant particleboard. 4. Thickness swelling of fire retardant complyboard was lower than that of fire retardant particleboard. 5. The moisture content of the boards treated with Pyresote and Minalith increased and with monoammonium phosphate reduced. 6. Fire retardant particleboard showed no ignition, and fire retardant complyboard started ignition, but time required to ignite was prolonged comparing the controlboard. Complyboard with only shell veneer treated showed ignition and lingering flame, but lingering flame time was shorter than controlboard. Complyboard with treated both core and veneer showed ignition but not lingering flame. 7. Flame length, carbonized area and weight loss were smaller than controlboard but had no significant difference among chemicals treated. 8. Temperature of unexposed surface of fire retardant particleboard was lowered with the increasing concentration of five chemicals. 9. Temperature of unexposed surface of fire retardant particleboard was lowered with the highest in Pyresote and the lowest in Minalith. 10. Temperature of unexposed surface of fire retardant complyboard was lower than that of controlboard.