• International Journal of Control, Automation, and Systems
• /
• 제4권2호
• /
• pp.255-270
• /
• 2006

In this paper, a design method of nonlinear autopilot for ship-to-ship missiles is proposed. Ship-to-ship missiles have strongly coupled dynamics through roll, yaw, and pitch channel in comparison with general STT type missiles. Thus it becomes difficult to employ previous control design method directly since we should find three different solutions for each control fin deflection and should verify the stability for more complicated dynamics. In this study, we first propose a control loop structure for roll, yaw, and pitch autopilot which can determine the required angles of all three control fins. For yaw and pitch autopilot design, missile model is reduced to a minimum phase model by applying a singular perturbation like technique to the yaw and pitch dynamics. Based on this model, a multi-input multi-output (MIMO) nonlinear autopilot is designed. And the stability is analyzed considering roll influences on dynamic couplings of yaw and pitch channel as well as the aerodynamic couplings. Some additional issues on the autopilot implementation for these coupled missile dynamics are discussed. Lastly, 6-DOF (degree of freedom) numerical simulation results are presented to verify the proposed method.

• 전기학회논문지P
• /
• 제66권2호
• /
• pp.63-68
• /
• 2017

This paper proposes a new non-isolated DC conversion circuit topology of the voltage source coupled inductor series resonant high-frequency PFM controlled boost chopper type DC-DC power converter using two in one IGBT power module, which can efficiently operate under a principle of zero current soft switching for wide output regulation voltage setting ranges and wide fluctuation of the input DC side voltage as well as the load variation ranges. Its steady state operating principle and the output voltage regulation characteristics in the open-loop-based output voltage control scheme without PI controller loop are described and evaluated from theoretical and experimented viewpoints. Finally, in this paper the computer-aided simulation steady-state analysis and the experimental results are presented in order to prove the effectiveness and the validity of voltage regulation characteristics of the proposed series resonant zero current soft switching boost chopper type DC-DC power converter circuit using IGBTs which is based on simple pulse frequency modulation strategy more than, 20kHz.

• 전자공학회논문지A
• /
• 제29A권10호
• /
• pp.24-28
• /
• 1992

A new design method of microstrip wide band VHF tunable bandpass filters using varacter diodes is presented. In the proposed filter both the input and output ports are coupled through capacitors, and an open micro-strip line is inserted between the coupled line in order to obtain the desired degree of coupling. The optimized filter responseses for the frequency range of 220-404MHz by TOUCH-STONE are compared with the measured ones.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.223-226
• /
• 2002

In this paper, we propose the FBG design using coupled mode theory based on perturbation theory. FBG can be used to extract the specific wavelength channel from the transmission ]me when many wavelengths are coupled in a multiwavelength transmission line. To analyze output characteristics of FBG and get optimum design data, we simulate through computer and verify by experiment. From the results obtained by simulation and experimentation, the proposed FBG fits for DWDM(Dense WBM) system because of the tunning narrow linewidth.

• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1728-1735
• /
• 1989

A design procedure for microstrip bandpass filters using step impedance resonators (SIR's) and tapped input/output to a conventional parallel coupled line bandpass filter is presented. The filter configuration consisting of both half-wavelength and SIR's suppreses to spurious resonance response near the second harmonics, while tapping techniques offer benefit in situations where the impractical. The measured frequency responses of the designed filter are in close agreement with the computed responses.

• 전력전자학회논문지
• /
• 제19권5호
• /
• pp.440-449
• /
• 2014

This study proposes an LLC series resonant converter with a current doubler using a coupled inductor as a rectification circuit for the secondary side. The current doubler circuit is generally used for a high-voltage input and low-voltage output circuit to obtain high efficiency with small transformer turn ratio. However, an inductive circuit is not generally used in the secondary side of an LLC series resonant converter. If inductive components exist on the secondary side, the resonant characteristics are changed through the secondary inductive circuit. Mathematical analysis shows that the secondary-side current doubler with coupled inductor is not affected by the resonant characteristic of the primary LLC if leakage inductance occurs in the coupled inductor. Results of the analysis are proven by simulation; an experiment is also conducted for the proposed circuit.

• 대한전자공학회논문지
• /
• 제9권2호
• /
• pp.1-16
• /
• 1972

본논문은 특성임퍼이던스가 선형적으로 변화하는 단일 Strip선로의 특성파라미터를 이용하여, 우선 even-mode 및 odd-mode임피이던스가 모두 선형적으로 변화하는 비대칭형인 결합Strip선로의 특성파라미터를 구하였다. 다음에는 상기한 비대칭결합Strip선로를 종속연결한 대칭형결합Strip선로를 구성하고, 선로단자조건에 따라서 결합Strip선로가 갖는 여파특성을 고찰하였다. 선형 결합Strip선로의 특성을 해석한 결과, 선형결합Strip선로는 균일Strip선로를 사용하는 경우에 비하여 몇가지 점에서 좋은 여파특성을 갖고 있음을 명시하였다.

• 조명전기설비학회논문지
• /
• 제28권1호
• /
• pp.69-78
• /
• 2014

In this paper, characteristics of wireless power transfer (WPT) systems using magnetically coupled resonance scheme with relay coils are investigated and modeled. Especially, asymmetric frequency splitting characteristics in over-coupled region of WPT with relays are measured and accurately modeled. Transmitter, receiver, and relay coils are modeled with R, L, C equivalent circuits. Using these circuit models and mutual inductances between coils, a WPT system is described with a linear matrix equation. For under-coupled region, a matrix is simplified considering only mutual inductances between adjacent coils. An analytical transfer characteristic of WPT system vs. distance is extracted using an inverse matrix that is acquired by Gauss elimination method for the simplified matrix. For over-coupled region, a matrix considering mutual inductances between non-adjacent coils is used to predict a frequency splitting characteristics accurately. A 6.3MHz WPT system with relay coils is implemented and measured. An accuracy of the model is investigated by comparing the output of the model with the measured results.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.899-909
• /
• 2015

A dual-input boost-buck converter with coupled inductors (DIBBC-CI) is proposed as a thermoelectric generator (TEG) power conditioner with a wide input voltage range. The DIBBC-CI is built by cascading two boost cells and a buck cell with shared inverse coupled filter inductors. Low current ripple on both sides of the TEG and the battery are achieved. Reduced size and power losses of the filter inductors are benefited from the DC magnetic flux cancellation in the inductor core, leading to high efficiency and high power density. The operational principle, impact of coupled inductors, and design considerations for the proposed converter are analyzed in detail. Distributed maximum power point tracking, battery charging, and output control are implemented using a competitive logic to ensure seamless switching among operational modes. Both the simulation and experimental results verify the feasibility of the proposed topology and control.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.1041-1044
• /
• 1999

In This paper, we investigated the single step prediction for output responses of chaotic system with multi Input multi output using chaotic neural networks. Since the systems with chaotic characteristics are coupled between internal parameters, the chaotic neural networks is very suitable for output response prediction of chaotic system. To evaluate the performance of the proposed neural network predictor, we adopt for Lorenz attractor with chaotic responses and compare the results with recurrent neural networks. The results demonstrated superior performance on convergence and computation time than the predictor using recurrent neural networks. And we could also see good predictive capability of chaotic neural network predictor.