• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.75-78
• /
• 1998

In this paper, we propose a new cell discarding and scheduling scheme which reduce cell loss rate by measuring, in real time, the number of discarded cells in the queuing system with a different loss priority for each class of service such that each class of service meets its cell loss rate requirements and reduce average delay rate for the traffic that is sensitive in cell delay in output buffer of the ATM switch. Throughout the computer simulation, the existing scheduling scheme and proposed scheme are compared with respect to cell loss rate and average delay time.

• 한국시뮬레이션학회논문지
• /
• 제8권4호
• /
• pp.1-8
• /
• 1999

This paper proposes an ATM switch architecture called Output Queued Batcher-Banyan switch (OQBBS). It consists of a Sorting Module, Expanding Module, and Output Queueing Modules. The principles of channel grouping and output queueing are used to increase the maximum throughput of an ATM switch. One distinctive feature of the OQBBS is that multiple cells can be simultaneously delivered to their desired output. The switch architecture is shown to be modular and easily expandable. The performance of the OQBBS in terms of throughput, cell delays, and cell loss rate under uniform random traffic condition is evaluated by computer simulation. The throughput and the average cell delay are close to the ideal performance behavior of a fully connected output queued crossbar switch. It is also shown that the OQBBS meets the cell loss probability requirement of $10^{-6}$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.216-217
• /
• 2007

In this study, we analyzed the electrical loss characteristics between ribbon and output terminal of constituent material according to electrical resistance during interconnection process of PV module. From this result, the electrical output power reduction rate caused by interaction between ribbon and cell's interconnection was 2.88%. There was 1W electrical output power reduction through the 16 solar cells. So it is expected that the wider size of PV module gives the higher loss in electricity production. Also, the average output power of PV module passed lamination process was increased by 0.081W per one solar cell and the increase rate was 3.7%.PV module's electrical loss before and after lamination process according to constituent material's terminal was 0.49W and 0.50W, respectively.

• 정보처리학회논문지B
• /
• 제9B권2호
• /
• pp.173-180
• /
• 2002

기존의 VOB(Virtual Output Buffer) 모델에서 신경회로망의 학습 패턴 처리를 위해 가상 셀 손실율이 도입되었다. VOB모델은 신경망이 실제 셀 손실율 없이도 연결 수락 경계을 잘 찾을 수 있음을 보여주었다. 그러나 VOB 모델은 셀 손실율을 과다 평가하는 경향이 있어 결과적으로 망 자원의 이용률이 낮은 단점이 있다. 본 논문에서는 이러한 단점을 보완하는 방법으로 연결 수락 경계에서 셀 손실율의 평균에 대한 정보를 충분히 포함하는 셀 손실율 참조 곡선의 개념을 제안하였다. 그리고 제안된 셀 손실율 참조 곡선을 이용하여 가상 셀 손실율을 처리하는 방법을 제안하였다. 제안된 한습 패턴 처리 방법은 ATM 트래픽 중에 가장 대표적인 두 가지 호원에 대하여 실험하였다. 실험에 사용된 호원은 LAN 데이터의 그래픽 특성을 가시는 On-Off 트래픽과 비디오 화상 통신의 특성을 가지는 Auto-Regressive 트래픽이다.

• 정보처리학회논문지C
• /
• 제9C권4호
• /
• pp.531-542
• /
• 2002

입력과 출력에 버퍼를 갖는 ATM 교환기의 셀 폐기 방법은 기존의 귀환(Backpressure)모드와 손실(Queueloss)모드가 있으며, 최근에는 두 모드의 단점을 보완한 하이브리드(Hybrid)모드가 제안되었다. 하이브리드모드는 목적하는 출력 버퍼와 입력 버퍼가 모두 포화일 경우에만 셀을 폐기하는 방식이다. 본 논문에서는 유니폼 트래픽하에서 Output-port expansion 기법을 사용한 귀환 손실 모드 및 하이브리드모드 하에서의 셀 손실률과 셀 지연을 성능 비교 분석한다 Output-port expansion 기법은, 한 타임 슬롯동안에 입력포트 당 하나의 셀만 교환되며, 만약 하나 이상의 셀들이 같은 출력포트로 향하고자 하면, 최대 교환되는 셀 수를 K(Output-port expansion ratio)개로 제한하는 방식이다. 셀 손실률을 비교 분석한 결과, 이전의 연구에서와는 달리 로드 0.9를 기점으로. 0.9이하의 로드에서는 하이브리드 모드가, 0.9 이상의 로드에서는 손실모드가 가장 낮은 셀 손실률을 보인다. 셀 지연을 비교 분석한 결과, 한 개의 교환기 성능 분석에서는 셀 손실로 인한 재전송(retransmission)을 고려하지 않는 관계로, 예상한 바와 같이, 로드가 많아질수록 셀 손실률이 높은 귀환모드가 K를 높일수록 다른 모드에 비해 낮은 셀 지연을 보였다.

• Journal of Power Electronics
• /
• 제4권2호
• /
• pp.87-95
• /
• 2004

A new fast-response high-current clamp DC-DC converter circuit design is presented that will meet the requirements and features of the new generation of microprocessors and digital systems. The clamp in the proposed converter amplifies the current in case of severe load changes and is able to produce high slew rate of output current and capability to keep constant the output voltage. This proposed high-current clamp technique is theoretically loss less, low cost and easy to implement with simple control scheme. This is modified from a basic buck topology by replacing the output inductor with two magnetically coupled inductors. Inductors are difference in inductance, one has large inductance and other has small inductance. The inductor with small inductance will take over the output inductor during fast load transient. It speedup the output current slew rate and reduce the output voltage drop in the case of heavy burden load changes.

• Corrosion Science and Technology
• /
• 제3권3호
• /
• pp.118-126
• /
• 2004

The correlation between sensor output and corrosion rate of reinforcing steel was evaluated by laboratory electrochemical tests in saturated $Ca(OH)_2$ with 3.5 wt.% NaCl and confirmed in concrete environment. In this paper, two types of electrochemical probes were developed: galvanic cells containing of steel/copper and steel/stainless steel couples. Potentiodynamic test, weight loss measurement, monitoring of open-circuit potential, linear polarization resistance (LPR) measurement and electrochemical impedance spectroscopy (EIS) were used to evaluate the corrosion behavior of steel bar embedded in concrete. Also, galvanic current measurements were conducted to obtain the charge of sensor embedded in concrete. In this study, steel/copper and steel/stainless steel sensors showed a good correlation in simulated concrete solution between sensor output and corrosion rate of steel bar. However, there was no linear relationship between steel/stainless steel sensor output and corrosion rate of steel bar in concrete environment due to the low galvanic current output. Thus, steel/copper sensor is a reliable corrosion monitoring sensor system which can detect corrosion rate of reinforcing steel in concrete structures.

• 한국통신학회논문지
• /
• 제19권3호
• /
• pp.479-491
• /
• 1994

본 논문에서는 유한 크기의 출력 버퍼를 가진 ATM 스위치에서 셀 지연 요구와 셀 손실 요구를 고려한 2-레벨 임계치를 갖는 우선순위 제어 방식을 제안하였다. 본 논문에서 제안한 우선 순위 제어 방식은 유한크기를 가진 하나의 버퍼에서 두개의 임계치를 두어 손실에 민감한 셀에 대해서는 셀손실률을 개선하고, 지연에 민감한 셀에 대해서는 셀 지연 시간을 개선하는 방법이다. 본 방식에서는 우선순위 제어 방식을 이론적으로 구하고 수치해석을 통해 셀손실률과 평균셀지연을 구하였다. 셀의 서비스 품질 특성에 따라 두개의 임계치를 적절히 조절함으로써 셀손실률 또는 평균셀지연의 개설효과를 얻을 수 있음을 확실히 알 수 있다.

• Journal of Communications and Networks
• /
• 제16권1호
• /
• pp.18-25
• /
• 2014

In this paper, we propose a codebook-based interference alignment (IA) scheme in the constant multiple-input multiple-output (MIMO) interference channel especially for the uplink scenario. In our proposed scheme, we assume cooperation among base stations (BSs) through reliable backhaul links so that global channel knowledge is available for all BSs, which enables BS to compute he transmit precoder and inform its quantized index to the associated user via limited rate feedback link. We present an upper bound on the rate loss of the proposed scheme and derive the scaling law of the feedback load to maintain a constant rate loss relative to IA with perfect channel knowledge. Considering the impact of overhead due to training, cooperation, and feedback, we address the effective degrees of freedom (DOF) of the proposed scheme and derive the maximization of the effective DOF. From simulation results, we verify our analysis on the scaling law to preserve the multiplexing gain and confirm that the proposed scheme is more effective than the conventional IA scheme in terms of the effective DOF.

• ETRI Journal
• /
• 제26권5호
• /
• pp.375-383
• /
• 2004

This paper proposes a common interleaving method associated with independent channel-encoding among transmitter antenna branches in orthogonal frequency and code division multiplexing based on multiple-input multiple-output (MIMO) multiplexing to achieve an extremely high throughput such as 1 Gbps using a 100 MHz bandwidth. This paper also investigates the average packet error rate performance as a function of the average received signal energy per bit-to-background noise power spectrum density ratio $(E_b/N_0)$. We found that the loss in the required average received $E_b/N_0$ of the proposed method is only within approximately 0.3 dB in up to a 12-path Rayleigh fading channel, using 16QAM and Turbo coding with a coding rate of 5/6. We also clarify that even for a large fading correlation among antenna branches, 1 Gbps is still possible by increasing the transmission power. Therefore, the proposed method reduces the processing rate to 1/4 in the turbo decoder with only a slight loss in the required average received $E_b/N_0$.