• Food Engineering Progress
• /
• v.13 no.2
• /
• pp.130-137
• /
• 2009

This study evaluated the potential of utilizing the osmotic solution from dried mango processing as alternative raw material for mango wine making. Fermentation was carried out using two kinds of yeast strains Saccharomyces bayanus, Lalvin EC-1118 and Saccharomyces cerevisiae, Lalvin D-47 at 20$^{\circ}C$ for 28 days. Physicochemical analysis during fermentation was performed for each treatment and the resulting wine samples were analyzed for color, volatiles and sensory properties. Results of physicochemical analysis between the two fermenting samples as well as the wine samples show almost similar results regardless of the yeast strains. Wine color of sample wines after storage were not significantly different at p<0.05 and when compared with a commercial mango wine. From the volatile analysis, esters and alcohols constituted majority of the compounds. Production of several esters, alcohols, acids and terpenes were affected by yeast strain used in fermentation. Results of sensory analysis showed that wines fermented by S. bayanus EC-1118 strain was more acceptable although sensory scores between the treatments and the reference wine showed significant differences in all the attributes evaluated, except for bitterness. The utilization of osmotic solution from dried mango process could produce similar properties with existing commercial mango wines although there is still need for further work on the improvement of some sensory attributes of the mango wines.

• Journal of the Korean institute of surface engineering
• /
• v.51 no.2
• /
• pp.95-103
• /
• 2018

Recently, many types of constructional steels have been often exposed to under severe corrosive environments due to acid rain with increasing environmental contamination. In order to inhibit their corrosion in severe corrosive environments, a painting method has been widely applied to numerous constructional steels of land as well as marine. Therefore, development of paint having a good quality of corrosion resistance is considered to be very important. In this study, four types of anti-corrosive paints (AP: Phenol epoxy, AC: Ceramic epoxy, AT: Coal tar epoxy, AH: High solid epoxy) were coated to the specimens, and then, were immerged in various salt solutions (0.1, 0.3, 3, 6, 9 and 15% NaCl solutions) for 11 days. And, the corrosion resistance of these samples by effect of osmotic pressure with salt concentration was investigated with electrochemical methods such as measurement of corrosion potential, impedance and corrosion current density. The corrosion current densities of all samples (AC, AT and AH) submerged in 3% NaCl solution exhibited the smallest values compared to other salt solutions. However, in the case of lower values of salt solutions than 3% NaCl solution, the corrosion current density increased again because it makes easier for water, dissolved oxygen and chloride ion etc. to invade toward inner side of coating film due to increasing of the osmotic pressure than 3% NaCl solution, but in the case of higher values of salt solutions than 3% NaCl solution, the coating film is easily deteriorated due to high concentration of chloride ion rather than the osmotic pressure, which resulted in increasing the corrosion current density. In particular, the AC sample indicated the best corrosion resistance in 6% NaCl solution compared to other samples. Consequently, it is considered that the corrosion mechanism of the coated steel plate is completely different from bare steel plate, and the corrosion resistance of coating film by osmotic pressure and chloride ion depend on various types of epoxy of paint in NaCl solution.

• Korean Membrane Journal
• /
• v.3 no.1
• /
• pp.59-68
• /
• 2001

Unlike existent field flow fractionation, new method, osmotic sink field flow fractionation is introduced and used ultrafiltration hollow fiber membranes as separation channel. This hollow fiber osmotic sink field flow fractionation is called HF-OSFFF. A theory that describes the retention, relaxation, resolution, plate number for the system, has been developed and experimentally verified by separation model of po1ystyrene latex beads. At external field, it is measured that radial flow rates change according to various concentrations of PEG solutions. Concentration of PEG solution vs. radial flow rate is a linear relation. For diameter distribution of unknown polymer sample, HF-OSFFF compared with the commercial capillary hydrodynamic flow fractionation (CHDF).

• Journal of the Korean Chemical Society
• /
• v.6 no.1
• /
• pp.94-98
• /
• 1962

The polycondensates of isophthalic acid-cinnamic acid-glycerine system were synthesized. The molecular weights of these products were determined by two methods, viscosity method and osmotic pressure methods. In the synthesis of resin, the reaction temperature was kept at 232$^{\circ}C$ and the mole ratio of the reactants was chosen as follows: Glycerine ;1.0 Isophthalic acid ;1.0 Cinnamic acid ;2.8 Excessive cinnamic acid prevented gelation of reaction mixtures. As the solution became very dilute, reduced osmotic pressure P/C (at the concentration of solution below 0.24g/100 ml of acetone) and reduced viscosity ${\eta}_{sp}/C$ (at the concentration of solution below 0.32 g/100 ml of acetone) increased rapidly. The correspondence between molecular weights determined by the two methods made Huggin's equation applicable to the prepared polymer. The values of K and a are $2.77{\times}10^{-5}$ and 1.063, respectively.

• 한국가시화정보학회:학술대회논문집
• /
• 2005.12a
• /
• pp.80-84
• /
• 2005

Many important properties in colloidal systems are usually determined by surface charge ($\zeta$-potential) of the contacted solid surface. In this study, $\zeta$-potential of glass $\mu$-channel was evaluated from the electro-osmotic velocity distribution. The electro-osmotic velocity inside a glass $\mu$-channel was measured using a micro-PIV velocity field measurement technique. This evaluation method is more simple and easy to approach, compared with the traditional streaming potential technique. The $\zeta$-potential in the glass $\mu$-channel was measured for two different mole NaCl solutions. The effect of an anion surfactant, sodium dodecyl sulphate (SDS), on the electro-osmotic velocity and $\zeta$-potential in the glass surface was also studied. In the range of $0\∼6$mM, the surfactant SDS was added to NaCl solution in four different mole concentrations. As a result, the addition of SDS increases $\zeta$-potential in the surface of the glass $\mu$-channel. The measured $\zeta$-potential was found to vary from-260 to-70mV. When negatively charged particles were used, the flow direction was opposite compared with that of neutral particles. The $\zeta$-potential has a positive sign for the negative particles.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.10 s.253
• /
• pp.935-941
• /
• 2006

Many important properties in colloidal systems are usually determined by surface charge $({\zeta}-potential)$ of the contacted solid surface. In this study, ${\zeta}-potential$ of glass ${\mu}-channel$ was evaluated from the electro-osmotic velocity distribution. The electro-osmotic velocity inside a glass f-channel was measured using a micro-PIV velocity field measurement technique. This evaluation method is more simple and easy to approach, compared with the traditional streaming potential technique. The ${\zeta}-potential$ in the glass ${\mu}-channel$ was measured fur two different mole NaCl solutions. The effect of an anion surfactant, sodium dodecyl sulphate (SDS), on the electro-osmotic velocity and f-potential in the glass surface was also studied. In the range of $0{\sim}6mM$, the surfactant SDS was added to NaCl solution in few different mole concentrations. As a result, the addition of SDS increases ${\zeta}-potential$ in the surface of the glass ${\mu}-channel$. The measured $\zeta-potential$ was found to vary from -260 to -70mV. When negatively charged particles were used, the flow direction was opposite compared with that of neutral particles. The ${\zeta}-potential$ has a positive sign for the negative particles.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.5
• /
• pp.353-358
• /
• 2011

In this study, ammonia removal characteristics in membrane contactor system under various operating conditions were evaluated. The mass transfer coefficient was used to quantitatively compare the effect of various operation conditions on ammonia removal efficiency. Effective removal of ammonia was possible with the tubular PTFE membrane contactor system at all tested conditions. Among the various operation parameters, contact time and solution pH showed significant effect on ammonia removal mechanism. Overall ammonia removal rate was not significantly affected by influent suspended solution concentration unlike other pressure driven membrane filtration processes. Also the osmotic distillation phenomena which deteriorate the mass transfer efficiency can be minimized by preheating of strip solution. Membrane contactor system can be a possible alternative to treat high strength nitrogen wastewater by optimizing operation conditions such as stripping solution flow rate, influent wastewater temperature, and influent pH.

• Journal of the Korean Chemical Society
• /
• v.24 no.3
• /
• pp.209-217
• /
• 1980

The relative viscosities and osmotic coefficients of solutions of urea, 1,3-dimethyl-urea(DMU), acetamide(AA), and propionamide (PA) in dimethylsulfoxide(DMSO), water, methanol, and in ethanol have been measured at 25 and $45^{\circ}$C by viscometry and osmometry. Viscosity increment in nonaqueous solutions decreased with increasing of the partial molal volumes of the solutes, but in aqueous solution the result was inversed. Viscosity increment of aqueous solution was smaller than that of aqueous DMU solution, but that of nonaqueous urea solution was larger than that of DMU. Amides, however, showed similar viscosity increment in any solvent.Osmotic coefficients of aqueous solution of urea were larger than those of DMU. In the nonaqueous solutions urea exhibited larger deviation from Raoult's law than DMU. The results indicated that urea molecules break water-structure in water, self-associate in DMSO, and showed larger solute-solvent interaction in alcohols than DMU. It can be also confirmed that amides break alcohol structure to a greater extent than any other solutes.

• Journal of Pharmaceutical Investigation
• /
• v.11 no.2
• /
• pp.1-10
• /
• 1981

Phospholipids were examined for their capacity to protect human erythrocytes against hemolysis induced by hypotonic solution, p-hydroxymercuribenzoate or hematin. The following results were obtained. 1. Phosphatidyl choline, lysophosphatidyl choline and phophatidyl ethanoleamine as well as chlorpromazine prevented the osmotic hemolysis of human erythrocytes which occurred due to water influx into erythrocytes from medium, but showed no effect on hematin-induced hemolysis which occurred without the volume change of erythrocytes. 2. Human erythrocytes were found to be most sensitive to the antihemolytic action of phospholipids among mammalian erythrocytes from sheep, rabbit, rat and mouse. 3. Phospholipids at the concentrations showing their strong antihemolytic effect on human erythrocytes against osmotic hemolysis had no influence on methylene blue uptake and volume change of erythrocytes in hypotonic solution. 4. Phospholipids increased erythrocyte deformability 2 to 3 times over control group and there was aclose relationship between their antihemolytic action and increase of deformability as a function of their concentrations. 5. The phospholipids increased the resistance to osmotic hemolysis of human erythrocytes by increasing membrane elasticity through their incorporation into lipid bilayer without altering glucose metabolism and water influx to erythrocytes.

• Korean Journal of Food Science and Technology
• /
• v.21 no.2
• /
• pp.307-312
• /
• 1989

Internal mass transfer during osmotic dehydration of carrots in sugar solutions was examined as a function of concentration, temperature and immersion time of those solutions using moisture loss, sugar gain, molality and rate parameter. Influence of osmotic dehydration and blanching on browning reaction of vacuum dried carrots(3% MC: wet basis) was also evaluated. Increasing the concentration and temperature of sugar solutions increased moisture loss, sugar gain, molality and rate parameter. Water loss and sugar gain were rapid in first 4 min and then levelled off. The rate of sugar gain and molality changes on temperature was significant in lower concentration$(20^{\circ}\;Brix)$ compared to higher concentration$(60^{\circ}\;Brix)$. The changes of rate parameter were affected by concentration than by temperature of sugar solutions. Moisture loss during osmotic dehydration using a sugar solution $(60^{\circ}\;Brix,\;80^{\circ}C)$ with 20min immersion time was 55.7%. Effect of osmotic dehydration and blanching before vacuum dried to 3% MC(Wet basis) on browning reaction was significant. Minimum browning reaction during vacuum drying was carried out using pretreatments such as osmotic dehydration in sugar solution$(40^{\circ}\;Brix,\;80^{\circ}C)$ with 16 min immersion time(O.D.=0.09) and blanching with 12 min immersion time at $80^{\circ}C$(O.D.=0.31) compared to control(O.D.=1.59).