• 대한조선학회논문집
• /
• 제35권2호
• /
• pp.20-28
• /
• 1998

몰수체의 운동을 정확하게 예측하기 위해서는 동적 모형의 비선형 구조를 선택하고, 이에 해당하는 조종계수를 모형 시험을 통해 추정하여야 한다. 모형 구조가 주어지면 조종계수들의 값만이 미지수가 되어 추정은 표준 최소 자승 문제로 정식화될 수 있다. 불행하게도 몰수체들의 비선형모형 구조는 거의 알려지지 않고 있다. 따라서, 모형 시험에서 측정된 자료들로부터 운동 방정식의 구조를 결정하는 방법을 개발하여 계수 추정 절차에 중요한 한 부분으로 포함시켜야 한다. 본 연구에서는 모형 시험 결과 해석을 위해 널리 사용되고 있는 최소 자승 알고리즘과 그 성능평가법에 대해 살펴보고, Gram-Schmidt에 의한 직교 분리법에 기초를 둔 계수 식별 알고리즘을 매우 단순하고 효과적으로 구조 선택법과 계수 추정법을 결합할 수 있도록 확장하였다. 마지막으로 시뮬레이션과 실제 몰수체에 대한 모형 시험 자료로의 적용을 통해 이 기법의 성능을 검증하였다. 결론적으로 본 연구의 방법은 모형 시험 결과로부터 효율적으로 운동 방정식의 구조를 식별하고 조종 계수를 추정함을 확인하였다.

• 대한의용생체공학회:의공학회지
• /
• 제37권5호
• /
• pp.153-160
• /
• 2016

This study proposes an algorithm for removal of CPR artifact in order that automated external defibrillator (AED) can effectively diagnose ECG rhythm during cardiopulmonary resuscitation (CPR). Current AED required to interrupt chest compression for reliable rhythm analysis to avoid the effect of artifacts produced by CPR. However even temporarily interruption of chest compression during CPR adversely affects the probability of restoration of spontaneous circulation (ROSC) and survival after the delivery of the shock. Therefore, we proposed a method for removal of CPR artifacts using least mean square (LMS) filter. The removal of the CPR artifacts would enable compressions to continue during AED rhythm analysis, thereby increasing the likelihood of resuscitation success. It was tested on 31 segments of shockable and 300 segments of non-shockable ECG signals recorded from three pigs during CPR. In the result, sensitivity (Se) and specificity (Sp) analysis on the test segments showed values of Se = 3.2%, Sp = 66.0% and Se = 96.8%, Sp = 98.7% in the case of unfiltered and filtered signals during CPR. In conclusion, it was shown that the proposed method can be a useful tool to exactly diagnose the ECG rhythm during the CPR.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권1호
• /
• pp.178-203
• /
• 2018

In this paper, authors have been evaluated the Frame Error Rate (FER) performance of IEEE 802.11 a/g/p standard 5 GHz frequency band WLAN over Rayleigh and Rician distributed fading channels in presence of Additive White Gaussian Noise (AWGN). Orthogonal Frequency Division Multiplexing (OFDM) based transceiver is implemented by using real-time signal processing frameworks (IEEE 802.11 Blocks) in GNU Radio Companion (GRC) and Ettus USRP N200 is used to process the symbol over the wireless radio channel. The FER is calculated for each sub-carrier conventional modulation schemes used by OFDM such as BPSK, QPSK, 16, 64-QAM with different punctuated coding rates. More precise SNR is computed by modifying the SNR calculation process of YANS and NIST error rate model to estimate more accurate FER. Here, real-time signal constellations, OFDM signal spectrums etc. are also observed to find the effect of multipath propagation of signals through flat and frequency selective fading channels. To reduce the error rate due to the multipath fading effect and Doppler shifting, channel estimation (CE) and equalization techniques such as Least Square (LS) and training based adaptive Least Mean Square (LMS) algorithm are applied in the receiver. The simulation work is practically verified at GRC by turning into a pair of Software Define Radio (SDR) as a simultaneous transceiver.

• Animal Bioscience
• /
• 제37권5호
• /
• pp.918-928
• /
• 2024

Objective: The adulteration of raw beef (BMr) with dog meat (DMr) and pork (PMr) becomes a serious problem because it is associated with halal status, quality, and safety of meats. This research aimed to develop an effective authentication method to detect non-halal meats (dog meat and pork) in beef using metabolomics approach. Methods: Liquid chromatography-high resolution mass spectrometry (LC-HRMS) using untargeted approach combined with chemometrics was applied for analysis non-halal meats in BMr. Results: The untargeted metabolomics approach successfully identified various metabolites in BMr DMr, PMr, and their mixtures. The discrimination and classification between authentic BMr and those adulterated with DMr and PMr were successfully determined using partial least square-discriminant analysis (PLS-DA) with high accuracy. All BMr samples containing non-halal meats could be differentiated from authentic BMr. A number of discriminating metabolites with potential as biomarkers to discriminate BMr in the mixtures with DMr and PMr could be identified from the analysis of variable importance for projection value. Partial least square (PLS) and orthogonal PLS (OPLS) regression using discriminating metabolites showed high accuracy (R² >0.990) and high precision (both RMSEC and RMSEE <5%) in predicting the concentration of DMr and PMr present in beef indicating that the discriminating metabolites were good predictors. The developed untargeted LC-HRMS metabolomics and chemometrics successfully identified non-halal meats adulteration (DMr and PMr) in beef with high sensitivity up to 0.1% (w/w). Conclusion: A combination of LC-HRMS untargeted metabolomic and chemometrics promises to be an effective analytical technique for halal authenticity testing of meats. This method could be further standardized and proposed as a method for halal authentication of meats.

• 한국음향학회지
• /
• 제22권6호
• /
• pp.425-433
• /
• 2003

음향 반향 제거기 (Acoustic Echo Canceller: AEC)는 원거리 회의 시스템이나 차량 내 핸즈프리 통화 등에서 필연적으로 발생하는 반향을 제거하기 위해 이용된다. 이러한 반향을 제거하기 위해 다양한 적응 필터링 알고리즘이 제안되었으며 LMS(Least Mean Square) 알고리즘은 다른 알고리즘에 비해 매우 단순하고, 비교적 강인하여 많은 응용 분야에 사용되고 있다. 그러나 LMS 알고리즘은 음성과 같은 상관도가 높은 유색 신호에 대해 음향반향 제거기의 수렴 속도를 저하시켜 전체적인 음향 반향 제거 성능을 떨어뜨리게 한다. 이를 보완하기 위하여 DCT나 DFT 등의 직교 변환 행렬을 이용하여 입력신호의 상관성을 저하시킨 후 LMS 적응 필터링 알고리즘을 적용하는 변환 영역 음향 반향 제거 알고리즘 등이 제안되었다. 본 논문에서는 MLT (Modulated Lapped Transform) 직교 변환행렬을 이용한 MLT영역의 적응음향반향 제거 알고리즘을 제안한다. 제안된 알고리즘은 기존의 NXN DCT, DFT, Hadamad등의 정방 행렬 대신에 2NXN 크기의 MLT 변환 행렬을 사용함으로서 유색 입력 신호에 대해 효과적인 상관성 저하와 빠른 수렴 속도를 달성할 수 있었으며 실제 음향 반향 제거 시스템에 적용하여 그 성능을 비교 입증하도록 하였다. 합성 음성신호와 실제 음성 신호를 이용한 모의 실험 결과 제안된 MLT 영역 음향 반향 제거 시스템은 기존의 DCT 변환 영역 음향 반향 시스템에 비해 약 2배 이상의 빠른 수렴속도와 약 20∼30 ㏈ 정도의 ERLE (Echo Return Loss Enhacement) 향상을 얻을 수 있었다

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권1호
• /
• pp.53-76
• /
• 2020

The synchronous phasor measurement algorithm is the core content of the phasor measurement unit. This manuscript proposes a dynamic synchronous phasor measurement algorithm based on compressed sensing theory. First, a dynamic signal model based on the Taylor series was established. The dynamic power signal was preprocessed using a least mean square error adaptive filter to eliminate interference from noise and harmonic components. A Chirplet overcomplete dictionary was then designed to realize a sparse representation. A reduction of the signal dimension was next achieved using a Gaussian observation matrix. Finally, the improved orthogonal matching pursuit algorithm was used to realize the sparse decomposition of the signal to be detected, the amplitude and phase of the original power signal were estimated according to the best matching atomic parameters, and the total vector error index was used for an error evaluation. Chroma 61511 was used for the output of various signals, the simulation results of which show that the proposed algorithm cannot only effectively filter out interference signals, it also achieves a better dynamic response performance and stability compared with a traditional DFT algorithm and the improved DFT synchronous phasor measurement algorithm, and the phasor measurement accuracy of the signal is greatly improved. In practical applications, the hardware costs of the system can be further reduced.

• 한국항행학회논문지
• /
• 제5권2호
• /
• pp.111-122
• /
• 2001

본 논문에서는 가중치 벡터를 계산하기 위하여 고유벡터와 고유값을 이용하는 Eigencanceller 방식의 성능을 평가하였다. Eigencanceller는 빔 패턴에 대한 제한조건들은 유지한 채 잡음이나 간섭신호에 대한 효과적인 제거를 제공한다. 그리고 Eigencanceller는 배열입력으로 간섭신호와 잡음이 수신되는 경우, 그리고 희망신호, 간섭신호 그리고 잡음이 수신되는 경우에 따라 각각 제한조건들이 달라지게 되고 최적의 가중치에 대한 해도 달라진다. 각각의 경우에 가중치 벡터에 대한 정상상태에서의 분석을 통해서 희망 신호의 유, 무에 관계없이 최적의 가중치 벡터에 대한 식들은 모두 동일하게 간섭신호에 직교하는 부공간(subspace)으로의 희망신호의 사영의 형태로 간략화 됨을 수식으로 증명하였다. 그리고 Eigencanceller구조가 RLS(Recursive Least-Square)방식보다도 우수한 성능을 보임을 수학적인 분석과 시뮬레이션을 통해 살펴보았다.

• Journal of electromagnetic engineering and science
• /
• 제9권2호
• /
• pp.71-77
• /
• 2009

OFDM(Orthogonal Frequency Division Multiplexing) signals sutler serious nonlinear distortion in the nonlinear HPA(High Power Amplifier) because of high PAPR(Peak Average Power Ratio). Nonlinear distortion can be improved by a pre-distorter, but this pre-distorter is insufficient when the PAPR is very high in an OPFDM system. In this paper, a DFT(Discrete Fourier Transform) transform technique is introduced for PAPR reduction. It is especially important to consider the memory effect of HPA for more precise predistortion. Therefore, in this paper, we consider two models, the TWTA(Traveling-Wave Tube Amplifier) model of Saleh without a memory effect and the HPA memory polynomial model that has a memory effect. We design a pre-distorter and an adaptive pre-distorter that uses the NLMS(Normalized Least Mean Square) algorithm for the compensation of this nonlinear distortion. Without the consideration of a memory effect, the system performance would be degraded, even if the pre-distorter is used for the compensation of the nonlinear distortion. From the simulation results, we can confirm that the proposed system shows an improvement in performance.

• 한국위성정보통신학회논문지
• /
• 제3권2호
• /
• pp.18-25
• /
• 2008

A major drawback of Orthogonal Frequency Division Multiplexing (OFDM) system is high peak-to-average power ratio (PAPR) of the transmitted signal which introduces inevitable non-linear distortion in the transmission due to the amplifier non-linear property. This causes both in-band distortion and out of band spectrum re-growth. A polynomial based pre-distortion is estimated using the non-linear and inverse non-linear polynomial achieved through the Least Square Error (LSE) method. A new technique of PAPR reduction called 'Phase Realignment' (PR) is proposed which has a optimal effect in improving the BER performance as well as considerable reduction in the PAPR. In this paper we used the PR method along with the 'Peak Clipping' (PC) method is used before the pre-distortion to remove the high peak present in the non constant amplitude of the OFDM signal responsible to drive the amplifier in near saturation region for better performance of the system.

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권3호
• /
• pp.142-152
• /
• 2014

Vehicular Ad-hoc Networks (VANETs) are comprised of wireless mobile nodes characterized by a randomly changing topology, high mobility, availability of geographic position, and fewer power constraints. Orthogonal Frequency Division Multiplexing (OFDM) is a promising candidate for the physical layer of VANET because of the inherent characteristics of the spectral efficiency and robustness to channel impairments. The susceptibility of OFDM to Inter-Carrier Interference (ICI) is a challenging issue. The high mobility of nodes in VANET causes higher Doppler shifts, which results in ICI in the OFDM system. In this paper, a frequency domain com-btype channel estimation was used to cancel out ICI. The channel frequency response at the pilot tones was estimated using a Least Square (LS) estimator. An efficient interpolation technique is required to estimate the channel at the data tones with low interpolation error. This paper proposes a robust interpolation technique to estimate the channel frequency response at the data subcarriers. The channel induced noise tended to degrade the Bit Error Rate (BER) performance of the system. Parallel concatenated Convolutional codes were used for error correction. At the decoding end, different decoding algorithms were considered for the component decoders of the iterative Turbo decoder. A performance and complexity comparison among the various decoding algorithms was also carried out.