• 대한치과교정학회지
• /
• 제48권6호
• /
• pp.405-411
• /
• 2018

Objective: This study was performed to investigate the rate of tooth movement and histological characteristics of extraction sockets those were subjected to corticotomy. Methods: A split-mouth randomized controlled trial experiment was designed. Thirty-two adult, male Wistar rats were divided into 2 groups: healing extraction socket (H) and recent extraction socket (R); these groups were randomly classified into 4 subgroups (0/7/21/60 days). The first maxillary molar was extracted on 1 side and 2 months were allowed for complete bone healing; then, the corresponding molar was extracted on the other side and surgical intervention was performed at the mid-alveolar point of the first maxillary molar. Ten grams of continuous force was applied. The outcomes measured were rate of tooth movement, percentage of periodontal space and histological evaluation. The rate of tooth movement was calculated as the measured distance divided by the duration of molar movement. Histomorphometric evaluations were performed on the second and third maxillary molars. The Wilcoxon signed rank test was used to compare differences between the two groups. Results: There were no significant differences in the rates of tooth movement between H and R groups at any of the 4 time points. The histological appearance and percentage of periodontal space between the R and H groups also demonstrated no significant differences. Conclusions: The rates of orthodontic tooth movement into recent and healed socket sites did not differ between the groups. Histological analysis of tooth movement revealed regional acceleration during every time period.

• 대한치과교정학회지
• /
• 제29권2호
• /
• pp.157-163
• /
• 1999

본 연구의 목적은 교정적 치아 이동시 교정력과 Half sine-wane pulsed electromagnetic field (HSPEMF)를 함께 적용한 경우 교정력 만을 적용한 경우보다 치아 이동량이 증가한다는 가설을 확인하고, HSPEMF의 적용 시간을 다양하게 적용하여 치아 이동이 일어나는 적용 시간의 역치와 적용 시간과 치아 이동량과의 관계를 밝히는데 있다. Hartley guinea pig를 실험 대상으로 하여 상악 좌우측 중절치에 12 g의 이개력을 발휘하는 스프링을 장착하여 실험군에 각각 4 시간, 8 시간 및 12 시간 동안 HSPEMF를 적용한 후 치아 이동량을 측정하여 다음과 같은 결론을 얻었다. 1. 10 일간의 실험 기간 동안 하루 4 시간의 HSPEMF를 적용한 경우 실험군과 대조군에서 치아 이동량이 유의성있는 차이를 보이지 않았다. 2. 10일간의 실험 기간 동안 발생한 치아 이동량에 있어서, 하루 8 시간 및 12 시간의 HSPEMF를 적용한 경우 각각 실험 8 일 및 6 일 이후부터 실험군이 대조군보다 더 큰 유의성 있는 증가를 보였다. 3. 10일간의 실험 기간 동안 발생한 치아 이동량에 있어서, HSPEMF를 하루 12시간씩 적용한 경우가8시간씩 적용한 경우보다 실험 후 7 일과 8 일에서 더 큰 유의성 있는 증가를 보였다.

• 대한치과교정학회지
• /
• 제54권1호
• /
• pp.3-15
• /
• 2024

The prevalence of intrabony defects in patients with advanced periodontitis stages III and IV is high. These patients usually need both periodontal treatment and orthodontic therapy, including tooth movement through bone defects, to improve masticatory function, aesthetics, and overall quality of life. Clinical practice guidelines recommend periodontal regenerative surgical interventions to resolve these defects and propose initiating orthodontic tooth movement (OTM) once periodontal therapy goals have been met. Surgical interventions using various regenerative technologies like barrier membranes and enamel matrix proteins, combined or not with bone replacement grafts, have proven effective in regenerating lost periodontal tissues. However, the combination of periodontal and orthodontic treatments requires consideration of how periodontal regenerative therapies influence OTM. Studies suggest that regenerated bone may differ in density, composition, vascularity, and cellular activity, potentially affecting the speed and efficiency of OTM, and potential root resorption of moved teeth. Understanding the sequence and timing of implementing OTM after regenerative periodontal interventions is crucial due to their interlinked processes of bone resorption and formation. This narrative review aims to uncover scientific evidence regarding these combined treatments, examining the impacts of different regenerative technologies on OTM and delineating their advantages, limitations, and best practices.

• 대한치과의사협회지
• /
• 제50권2호
• /
• pp.58-63
• /
• 2012

The fundamental principles and the role of surgeons and orthodontists to produce successful results in orthodontic treatment combined with orthognathic surgery is not different from those of conventional procedures and FOS: surgery-first-orthodontic-treatment-later approach. The communication and cooperation between surgeon and orthodontist is of crucial importance. In FOS, the pre-surgical orthodontic preparation is not carried out in the patient's mouth, but in the mounted stone model and in addition to the simulation of tooth movement, to get a precise surgical occlusion, the entire steps of treatment should be simulated on the articulator as well. Right after the surgery, due to the instability of the occlusion, appropriate post operational care should be given according to the surgical technique applied to the mandible by use of final surgical wafer about 8 weeks.

• 대한소아치과학회지
• /
• 제24권3호
• /
• pp.628-636
• /
• 1997

Impacted or unerupted permanent teeth have many problems in making a diagnosis and treatment plan in dental clinic. There are several methods to treat impacted teeth. The combination of surgical exposure and orthodontic traction is usually the treatment of choice in cases with impacted teeth. Two cases are reported, which were treated with surgical intervention and orthodontic movement. and one case is treated with orthodontic movement alone. To improve esthetic problem and maintain periodontal health, We should avoid loss of attached gingiva in surgical exposure, and excessive orthodontic force during the traction of the impacted tooth.

• 대한치과교정학회지
• /
• 제54권3호
• /
• pp.160-170
• /
• 2024

Objective: Owing to the availability of 3D software, scanners, and printers, clinicians are encouraged to produce in-office aligners. Recently, a new direct-printing resin (Tera Harz TC-85DAC) has been introduced. Studies on its mechanical characteristics and biological effects have been published; however, evidence on its efficacy in orthodontic treatment remains scarce. This pilot study aimed to investigate the accuracy of teeth movement achieved with direct-printed aligners. Methods: Seventeen patients (eight males and nine females) with a mean age of 27.67 ± 8.95 years, presenting with dental rotations < 30° and spaces/crowding < 5 mm, were recruited for this study. The teeth movement was planned starting from a T0 digital dental cast. The 3D direct-printed aligners were produced using Tera Harz TC-85DAC resin. Once the orthodontic treatment was completed, a final digital cast was obtained (T1). The planned teeth positions were then superimposed onto the T0 and T1 digital models. The differences between the programmed movements and the achieved overall torque, tip, rotation, and transverse dimensions were assessed using the paired t test or Wilcoxon's signed rank test. Results: The overall accuracies for torque, tip, and rotation were 67.6%, 64.2%, and 72.0%, respectively. The accuracy of the change in transverse diameter was 99.6%. Conclusions: Within the limits of the present pilot study (difficulties with abnormally shaped teeth and use of attachments), it can be concluded that 3D printed aligners can be successfully printed in-house and utilized for mildly crowded cases, with a comparable accuracy of tooth movement to that of other aligners.

• Journal of Korean Dental Science
• /
• 제3권1호
• /
• pp.32-38
• /
• 2010

Objective : To evaluate the relationship between the dose of Clodronate and serum level of alkaline phosphatase (ALP), calcium (Ca), and phosphate (PO4) during orthodontic tooth movement MaterialS and MethodS: A total of 18 sex-matched Wistar rats (weight=180~230g, mean age=8 weeks) were allocated into the 2.5mM Clodronate (2.5C) group, 10mM Clodronate (10C) group, or control group (n=6 for each group). After the application of a nickel-titanium closed coil spring (force of 60g) between the upper central incisors and first molars (UFM), 2.5C, 10C, or saline was injected every third day into the subperiosteum of the alveolar bone adjacent to UFM for the experimental and control groups. The animals were sacrificed 17 days later. Trunk blood was quickly collected into a heparinized tube and centrifuged at 2,000 rpm for 20 min. The plasma was used for the biochemical assays of the serum level of ALP, Ca, and PO4. Kruskall-Wallis test and Mann-Whitney test with Bonferroni correction were performed for the statistical analyses. Results : Dose-dependent increase in the level of ALP (P<0.01) and decrease in the level of Ca (P<0.001) were observed among the control, 2.5C, and 10C groups. Although there was no significant difference in PO4 between the 2.5C and 10C groups, the 10C group showed a significantly higher level of PO4 than the control group (P<0.01). Conclusion : Since Clodronate induced significant dose-dependent change in the serum level of ALP, Ca, and PO4 during orthodontic tooth movement, orthodontists should consider these biochemical markers not only as a diagnostic tool for bone turnover rate but also as a monitoring tool for orthodontic tooth movement.

• 대한치과교정학회지
• /
• 제42권4호
• /
• pp.207-217
• /
• 2012

Objective: This study aimed to evaluate the effect of an intentionally created socket on bone remodeling with orthodontic tooth movement in rabbits. Methods: Eighteen male rabbits weighing 3.8 - 4.25 kg were used. An 8-mm deep and 2-mm wide socket was drilled in the bone 1 mm mesial to the right mandibular first premolar. The left first premolar was extracted to serve as an extraction socket. A traction force of 100 cN was applied to the right first premolar and left second premolar. Sections were obtained at the middle third of the moving tooth for both the drilled and extraction sockets and evaluated with hematoxylin and eosin staining and immunohistochemical analyses. The amount of tooth movement and tartrate-resistant acid phosphatase (TRAP)-positive cell count were compared between the 2 groups using the Mann-Whitney U test. Results: At week 2, the distance of tooth movement was significantly higher in the intentional socket group (p < 0.05) than in the extraction socket group. The number of TRAP-positive cells decreased in week 2 but increased in week 3 (p < 0.05). However, there were no significant differences between the groups. Furthermore, results of transforming growth factor (TGF)-${\beta}$ staining revealed no significant differences. Conclusions: The intentional socket group showed greater distance of tooth movement than did the extraction socket group at week 2. Osteoclast counts and results of immunohistochemical analyses suggested elevated bone remodeling in both the groups. Thus, osteotomy may be an effective modality for enhancing tooth movement in orthodontic treatment.

• 대한치과교정학회지
• /
• 제33권4호
• /
• pp.279-291
• /
• 2003

낮은 강도의 전류는 골세포의 활성화 대사를 증가시키는 것으로 알려져 왔다. 이 연구는 초소형 전기 장치에 의한 전기 자극이 교정적 치아 이동에 미치는 영향을 규명하기 위하여, 체중 3kg내외의 고양이 6마리를 대상으로 가철성 교정장치와 NiTi coil spring(75gm)을 사용하여 상악 견치를 이동시켰다. 실험군측 견치에는 교정력과 간헐적인 $20{\mu}A$의 전기 자극을 가하였고, 대조군측에는 같은 크기의 교정력만을 가한 후 4주 동안의 치아 이동량을 측정하여 비교하였으며, 치아를 중심으로 조직을 절취하여 탈회하고 조직 처리 후 광학 현미경으로 치주조직의 변화를 비교하여 다음과 같은 결론을 얻었다. 1. 28일간의 실험 기간 동안 실험측의 치아 이동량은 대조군에 비하여 현저히 증가하여, 4주후에 실험측의 치아는 대조군에 비하여 37% 증가된 이동량을 기록하였다. 2. 전기 자극을 받은 치아의 치근 견인측에서 대조군에 비하여 조직학적으로 증가된 골형성 양상이 관찰되었다. 3. 28일간의 전기 자극과 교정력으로 실험측 치아의 압박측에서 대조군에 비하여 증가된 골 흡수 양상이 관찰되었다. 4. 실험군 견치 치근 주위 조직에서는 전반적으로 더 많은 수의 조골 및 파골 세포들과 모세 혈관, 골양 조직들이 관찰됨으로써 증가된 조직 세포 활성을 반영하였다. 5. 1일 5시간 동안의 간헐적 전류 자극은 치아 이동량을 증가시키고 조직 개조를 활성화시키는 효과가 있었다. 이상의 결과는 외부에서 가한 낮은 강도의 간헐적 전기 자극으로 교정적 치아 이동량이 많아지고 치주 조직의 개조 활성이 증가됨을 보이므로 초소형 전기 장치에 의한 자극은 치아 이동과 주위 조직 개조를 촉진시킬 가능성이 있을 것으로 평가되었다.

• 대한치과교정학회지
• /
• 제47권5호
• /
• pp.289-297
• /
• 2017

Objective: The objective of this study was to analyze the patterns of tooth movements when distalization of mandibular molars using a mini-plate took place. A finite element analysis was applied to analyze patterns of tooth movements. Methods: The model of the mandible and teeth were used to build a finite element analysis model, and a mini-plate was inserted in the mandibular ramus. Two different orthodontic forces were established for displacement of mandibular molars. Orthodontic forces were applied at the level of the bracket and at the level of the cemento-enamel junction in the mandibular canine respectively. Results: Applying orthodontic forces at the level of the cemento-enamel junction resulted in a greater biomechanical bodily movement in distalization of the mandibular molars compared to when the orthodontic forces were applied at the level of the bracket. Applying orthodontic forces to the cemento-enamel junction also resulted in unwanted greater extrusive movements in distalization of the mandibular molars compared to the bracket level. Conclusions: With considering the mode of orthodontic teeth movement, applying different vertical orthodontic forces for distalization of mandibular molars can lead to more effective distalization of teeth.