• The korean journal of orthodontics
• /
• v.40 no.1
• /
• pp.16-26
• /
• 2010

Objective: The purposes of this study were to evaluate the force and stress depending on the type, deflection and thickness of the materials and to evaluate the mechanical properties of thermoplastic materials after repeated loading. Methods: Four types of thermoplastic products were tested. Force until the deflections of 2.0 mm and the stress when the materials were restoring to its resting position were evaluated. The mechanical properties of thermoplastic materials evaluated after 5 repeated loading cycles. Results: The interaction was observed between the thickness and the deflection (p < 0.05) from the regression equation. Thickness and amount of deflection rather than products and materials showed the largest effect on force and stress. In all products, at least 159 gf of force was required for more than 1.0 mm deflection or when materials with 1.0 mm thickness were deflected. The stress recorded was more than 19 gf/$mm^2$. During repeated loading, each group showed significant difference on the force and the stress (p < 0.01), 10 - 17% reduction of force and 4 - 7% reduction of stress in average. Conclusions: Proper thickness of thermoplastic materials and deflection level of tooth movement should be decided for the physiologic tooth movement. Force decay after repeated loading should be considered for the efficient tooth movement.

• Imaging Science in Dentistry
• /
• v.44 no.3
• /
• pp.207-212
• /
• 2014

Purpose: This study aimed to investigate the deviation of landmarks from horizontal or midsagittal reference planes according to the methods of establishing reference planes. Materials and Methods: Computed tomography (CT) scans of 18 patients who received orthodontic and orthognathic surgical treatment were reviewed. Each CT scan was reconstructed by three methods for establishing three orthogonal reference planes (namely, the horizontal, midsagittal, and coronal reference planes). The horizontal (bilateral porions and bilateral orbitales) and midsagittal (crista galli, nasion, prechiasmatic point, opisthion, and anterior nasal spine) landmarks were identified on each CT scan. Vertical deviation of the horizontal landmarks and horizontal deviation of the midsagittal landmarks were measured. Results: The porion and orbitale, which were not involved in establishing the horizontal reference plane, were found to deviate vertically from the horizontal reference plane in the three methods. The midsagittal landmarks, which were not used for the midsagittal reference plane, deviated horizontally from the midsagittal reference plane in the three methods. Conclusion: In a three-dimensional facial analysis, the vertical and horizontal deviations of the landmarks from the horizontal and midsagittal reference planes could vary depending on the methods of establishing reference planes.

• The korean journal of orthodontics
• /
• v.22 no.3 s.38
• /
• pp.657-673
• /
• 1992

Orthodontic treatment of cleft patients is difficult as the growth is different from that of normal ones. So it is very important to know the characteristic features of the craniofacial morphology and growth pattern in unilateral cleft lip and palate patients. The materials for this study consisted of 55 normal males and 50 unilateral cleft lip and palate ones who received cheiloplasty and palatoplasty previously. The cleft subjects were divided into 4 groups according to their ages kto find out the growth pattern of hard and soft tissue, and to compare the features with those of normal ones. Each cephalogram analysed by McNamara method and others. The obtained results were as follows 1. In the unilateral cleft lip and palate subjects, forward growth of the maxilla was smaller than that of normal ones from 9 years old. So the maxilla was retruded. The maxillary incisors were severely retruded in all age groups. 2. The mandibular overall length and its anteroposterior position did not show any significant differences between two groups. But the height of ramus was very short and the mandible had vertical growth tendency to compensate for undergrowth of the maxilla in cleft subjects after 12 years of age. 3. Horizontal growth of the soft tissue in middle face was smaller than that of any other facial region from 9 years old. The vertical growth rate of upper lip was decreased as growing old. 4. In cleft subjects, the upper and lower facial component angle and the facial convexity angle were large. So their facial profile changed to straight or concave as growing old.

• Imaging Science in Dentistry
• /
• v.47 no.2
• /
• pp.117-122
• /
• 2017

Purpose: The aim of this study was to compare the use of 3-dimensional (3D) laser scanning and cone-beam computed tomography (CBCT) as methods of root surface measurement. Materials and Methods: Thirty teeth (15 maxillary first premolars and 15 mandibular first premolars) from 8 patients who required extractions for orthodontic treatment were selected. Before extraction, pre-treatment CBCT images of all the patients were recorded. First, a CBCT image was imported into simulation software (Mimics version 15.01; Materialise, Leuven, Belgium) and the root surface area of each tooth was calculated using 3-Matic (version 7.01, Materialise, Leuven, Belgium). After extraction, all the teeth were scanned and the root surface area of each extracted tooth was calculated. The root surface areas calculated using these 2 measurement methods were analyzed using the paired t-test (P<.05). Correlations between the 2 methods were determined by calculating the Pearson correlation coefficient. The intraclass correlation coefficient(ICC) was used to assess intraobserver reliability. Results: The root surface area measurements ($230.11{\pm}41.97mm^2$) obtained using CBCT were slightly greater than those ($229.31{\pm}42.46mm^2$) obtained using 3D laser scanning, but not significantly (P=.425). A high Pearson correlation coefficient was found between the CBCT and the 3D laser scanner measurements. The intraobserver ICC was 1.000 for 3D laser scanning and 0.990 for CBCT. Conclusion: This study presents a novel CBCT approach for measuring the root surface area; this technique can be used for estimating the root surface area of non-extracted teeth.

• Imaging Science in Dentistry
• /
• v.47 no.2
• /
• pp.69-74
• /
• 2017

Purpose: The nasopalatine canal is a well-known, important anatomical structure in the anterior maxilla, but this region contains many accessory canals. The canalis sinuosus (CS) is one of these canals; it contains the anterior superior alveolar nerve, along with veins and arteries. The purpose of this study was to evaluate the CS using cone-beam computed tomography (CBCT) in patients with maxillary impacted canines. Materials and Methods: A total of 111 patients admitted to the Istanbul Medipol University School of Dentistry for the exposure, orthodontic treatment, and/or extraction of an impacted canine were included in this study. CBCT images were obtained for these patients under standard conditions. Axial, coronal, and sagittal sections were evaluated to assess the prevalence of CS, the direction and diameter of the canal, its relation with the impacted canine, and its distance from the alveolar crest. Further, possible correlations with patient gender and age were analyzed. Results: The CS could be detected bilaterally in all the evaluated tomography images. The mean canal diameter was significantly larger in males than in females(P=.001). The CS ran significantly closer to the impacted canine when the canal was located horizontally (P=.03). Variations of the canal, such as accessory canals, were identified in 6 patients. Conclusion: CS is an anatomical entity that may resemble periapical lesions and other anatomical structures. Evaluation with CBCT prior to surgical procedures in the anterior maxilla will help to prevent overlooking such anatomical structures and to decrease possible surgical complications.

• The korean journal of orthodontics
• /
• v.21 no.2 s.34
• /
• pp.433-446
• /
• 1991

The present study was performed to evaluate the relaxation patterns of rubber elastics, elastomeric modules and chains stored in the water bath. Initial loading profiles were established for extension of $100\%,\;200\%$ of their original length for elastomeric chains and of 21, 28, 35, 42, 49mm for rubber elastics and elastomeric modules. The tests were performed on materials stored in distilled water at $37^{\circ}C$ and extraoral elastics stored in dry state at room temperature, at 0 hour, 1 hour, 6 hours, 1 day, 1 week, 2 weeks, 3 weeks, and 4 weeks, respectively. The following results were drawn: 1. The relaxation of rubber elastics manifested no correlation with increments of the extension distances, but showed correlation with time lapse. Remaining forces of rubber elastics carne out $84.6-98.52\%$ after 1 day, $70.92-89.31\%$ after 3 weeks of period. 2. The relaxation of elastomers manifested no correlation with increments of the extension distances, however represented considerable relaxation with time lapse as rapid relaxation after 1 hour and then gradual relaxations with time lapse. Modules relaxed much more than chains. $60.58-67.05\%$ of remaining forces for chains and $37.77-65.17\%$ for modules after 1 hour were turned out, and $51.48-62.22\%$ for chains and $8.04-25.15\%$ for modules after 3 weeks as well. 3. Permanent deformation rates of rubber elastics could not be measured with present investigation, but elastomers underwent severe deformations. 4. $3-9\%$ of permanent deformations for chains, $3-10\%$ for modules at 0 hour were turned out, and $25-30\%$ for chains, $96-145\%$ for modules after 3 weeks as well.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.5
• /
• pp.360-365
• /
• 2010

Introduction: Mammalian tooth pulp is densely innervated by sensory nerves that are mostly C fibers and A delta fibers. However, there is evidence suggesting that many unmyelinated axons in the pulp are in fact parent meylinated axons. Immunohistochemical staining for neurofilament protein 200 kDa (NFP200) was performed to identify the demyelinated but parent myelinated axons. Materials and Methods: The pulp was removed from healthy premolars and 3rd molars extracted from juveniles and adults undergoing orthodontic treatment, and immunohistochemical staining were applied with NPF200 antibodies, which specifically dye myelinated axons. The specimens underwent an electron microscopy examination with diaminobenzidine (DAB) immunostaining after observation and analysis by fluorescence and confocal laser scanning microscopy. Results: The NPF200 immuno-positive axons in the radicular pulp areas were observed as bundles of many nerve fibers. Many small bundles were formed with fewer axons when firing to the coronal pulp areas and then reachrd a different direction. In the radicular pulp, unmyelinated axons and myelinated axons were present together. However, in the coronal pulp, unmyelinated axons were most common and NFP200 immuno-positive unmyelinated axons with a larger diameter than those in the radicular pulp were observed more frequently. On the other hand, most of the immuno-positive unmyelinated fibers were similar in size to that of typically well-known unmyelinated fibers. Conclusion: Myelinated fibers innervated to the dental pulp maintain their myelins in the radicular portion, but these fibers lost myelins in the coronal portion. After the loss of myelin, the size of the axoplasm also decreased.

• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.439-446
• /
• 2014

To evaluate the effects of an artifact by metal material for orthodontics in Magnetic Resonance Image (MRI) examination, wires and brackets used in orthodontics were selected and compared. Using a head coil, a $T_2$-weighted image, $T_1$-weighted image and FLAIR image were obtained. With obtained images, the sizes of the artifacts were measured and compared using Image J Program. In the research, the material with the biggest artifact in the wires and brackets for orthodontics was stainless steel wire. In the future, selecting and developing metal for correction should be considered also in other fields along with the purpose of orthodontics.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.5
• /
• pp.422-426
• /
• 2005

Purpose : The purpose of this study was to investigate the vertical stability after BSSRO surgery in skeletal class III malocclusion patients with mild anterior open bite and to present a method to increase the stability. Materials and methods : 36 patients, 11 male and 25 female, who received BSSRO surgery with the diagnosis of skeletal class III with anterior open bite at the Department of Oral and Maxillofacial Surgery in Samsung Medical Center, from January 2002 to August 2003, were selected for this study. The patients were between 18 to 45 years of age. Preoperative and postoperative (immediate, 6 months, and 1 year after operation) lateral cephalograms were compared to evaluate the vertical stability by measuring the distance of nasion-menton, mandibular plane angle, and overbite. Results : The nasion-menton distance decreased by 1.65mm immediately after the operation in comparison to the preoperative value. This distance further decreased by 0.60 mm at 6 months and 1.06mm at 1 year after the operation. The mandibular plane angle increased after the operation and further increased at 6 months and 1 year. The amount of overbite increased by the operation was 2.34mm and an additional increase of 0.70mm at 6 months and 0.94mm at 1 year were shown. Conclusion : Clinically, none of the patients showed relapse of anterior open bite and the vertical stability is highly influenced by orthodontic treatment after the operation. In this study, BSSRO surgery is considered to be a rather reliable procedure that restores stability to skeletal class III malocclusion patients with slight anterior open bite.

• Imaging Science in Dentistry
• /
• v.47 no.4
• /
• pp.241-246
• /
• 2017

Purpose: The aim of this study was to compare the root surface areas of the maxillary permanent teeth in Thai patients exhibiting anterior normal overbite and in those exhibiting anterior open bite, using cone-beam computed tomography (CBCT). Materials and Methods: CBCT images of maxillary permanent teeth from 15 patients with anterior normal overbite and 18 patients with anterior open bite were selected. Three-dimensional tooth models were constructed using Mimics Research version 17.0. The cementoenamel junction was marked manually. The root surface area was calculated automatically by 3-Matic Research version 9.0. The root surface areas of each tooth type from both types of bite were compared using the independent t-test (P<.05). The intraclass correlation coefficient was used to assess intraobserver reliability. Results: The mean root surface areas of the maxillary central and lateral incisors in individuals with anterior open bite were significantly less than those in those with normal bite. The mean root surface area of the maxillary second premolar in individuals with anterior open bite was significantly greater than in those with normal bite. Conclusion: Anterior open-bite malocclusion might affect the root surface area, so orthodontic force magnitudes should be carefully determined.