• Research in Plant Disease
• /
• v.30 no.1
• /
• pp.82-87
• /
• 2024

Leatherleaf fern (Rumohra adiantiformis) is an important ornamental plant in Indonesia and global. Green fern leaves with bold dark green color with long shelf-life, attract florists as decoration. Indonesia is one important leatherleaf fern exporters, however currently an outbreak of leaf blight decreased production significantly. Initial symptom was reddish brown spots from edge of leaf, which was gradually followed by dark-brown necrotic lesions causing leaf blight and dried. This is a study to do Koch-Postulate approach and molecular identification, to identify the pathogen of the "new emerging disease" reported. Based on multigene analysis using primers from ITS, β-tub and tef1-α gene markers, the pathogen was identified as Neopestalotiopsis sp. All sequences have been deposited in GenBank with accession number of OR905551 (ITS), OR899817 (ßtubulin) and OR899816 (TEF). This Neopestalotiopsis leaf blight causes an emerging concern in leatherleaf fern in Indonesia and global biosecurity because it infected an export commodity.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.3
• /
• pp.67-72
• /
• 2005

For the two species of native fern that have high development potential for interior landscape, Rumohra aristata and Cyclosorus dentatus, the physiological and growth characteries as nitrogen application rate such as $NaNO_3$ 0.0mg/L, $NaNO_3$ 0.5mg/L, $NaNO_3$5.0mg/L, $NaNO_3$ 50mg/L and $NaNO_3$ 500mg/L were surveyed. 1. A significant changes of Rumohra aristata, in top growth was not distinctive. However, as nitrogen application rate increased, the numbers of leaves declined and the content of chlorophyll and the number of wilted leaves increased. 2. As nitrogen application rate increased, the top growth of Cyclosorus dentatus and the content of chlorophyll was increased. However, its overall, ornamental value was reduced due to the rising number of wilted leaves and the declining number of new leaves.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.63-63
• /
• 2020

This study investigated the growth of native ferns under indoor light intensities to identify the introduction possibility as in-door ornamental plants. Three evergreen perennial fern species used in this experiment were Coniogramme japonica (Thunb.) Diels, Woodwardia japonica (L. f.) Sm., and Cyclosorus acuminatus (Houtt.) Nakai ex H. Itô. The light intensities were adjusted to 10, 50, 100 and 200 PPFD (µmol·m^-2·s^-1) based on the measurement of the various indoor light quantities. The experiment was conducted for a total of 8 weeks, and the light period (12/12h), temperature (25±1℃), and humidity (55±3%) were maintained during the experiment. The control plant group was grown in glass greenhouse for the same period. As the result of the study, in door C. japonica showed better growth under light intensities of 100, 200 PPFD. However, withering of the plants were observed under all light intensities except the control, which causes an ornamental value decrease. This seems to be related to the increase of DIo/RC value in chlorophyll fluorescence parameters. In the W. japonica growth data, the plant height was not significantly different from the control but, the leaf number decreased more than a two-fold. Also, the formed leaves turned brown and showed a poor growth and SPAD value at 200 PPFD had decreased significantly. Growth data of C. acuminatus was not significantly different with the control at all light intensities however, withering was observed at 100 and 200 PPFD. In chlorophyll fluorescence parameters, significant decrease in Pi_Abs and increase in DIo/RC value at 200 PPFD impose that stress caused by the intense light might be the reason of the withering of the plants.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.44-44
• /
• 2019

This study aimed to develop a suitable method for inducing the proliferation of prothallus and producing sporophytes of rock polypody (Polypodium vulgare L.). The prothalli used in all experiments were obtained from spore germination and sub-cultured for 8-week intervals. The most appropriate media for prothallus propagation were investigated by culturing 300 mg of prothallus in MS ($1/4{\times}$, $1/2{\times}$, $1{\times}$, and $2{\times}$ strength) medium and in Knop medium for 8 weeks. Cultures were maintained at a temperature of $25{\pm}1^{\circ}C$, light intensity of $30{\pm}1.0{\mu}mol-m-2{\cdot}s-1$, and a photoperiod of 16/8 h (light/dark). Fresh weight of prothalli was 4.8 g on $1{\times}$ MS, 4.5 g on $1/2{\times}$ MS and 4.3 g on 1/4 MS medium. To select a suitable soil combination for sporophyte formation, 1.0 g of prothallus was ground with distilled water, spread in five combinations onto different soil substrates (decomposed granite, horticultural substrates, peat moss, and perlite), and then cultivated for 13 weeks. The sporophyte cultures were maintained at a temperature of $25{\pm}1^{\circ}C$, light intensity of $43{\pm}2.0{\mu}mol-m-2{\cdot}s-1$, humidity of $84{\pm}1.4%$, and a photoperiod of 16/8 h (light/dark). The results showed that a mixture containing a 2:1 (v:v) ratio of horticultural substrate and perlite, increased sporophyte formation to 462.5 sporophytes per pot (7.5 cm2). The other soil substrates produced from 314.5 to 405.3 sporophytes per pot. Therefore, our results will provide conditions suitable for mass production of Polypodium vulgare L.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.6
• /
• pp.13-20
• /
• 2005

This study was conducted to examine the growth and physiological characteristics of Polystichum lepidocaulon native fern as affected by soil mixture as an environment modeled on habitate where was sunken-condition. 1. Polystichum lepidocaulon grew well sunken more than non-sunken condition. Under soil mixture of field soil : sand : leaf mold, Plant height, frond width, frond length, stipe length and ornamental value were increased compared with the other soil mixture. 2. Fresh and dry weight of fronds were higher with non-sunken than sunken condition. In sunken condition, fresh and dry weight were better with field soil : sand : leaf mold than the other soil mixture. 3. Number of spore fronds were increased with sunken condition. As sunken condition, sand : leaf mold was better than field soil : sand : leaf mold or leaf mold. 4. Photosynthetic rate, $CO_2$ absorption rate and water efficiency were higher with field soil : sand : leaf mold than that of sand : leaf mold or leaf mold. expect of stomatal conduction and $CO_2$ use efficiency.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.43-43
• /
• 2019

Deparia pycnosora (Christ) M. Kato is a fern used as ornamental plant. In addition, it is called "Teol-go-sa-ri" in Korean name. The aim of this study was to develop a practical propagation method of D. pycnosora using tissue culture technique. Prothallus obtained from spore germination was the used as experiment materials. The prothalli (300 mg) used in all experiments were sub-cultured for 8-week intervals. The most suitable media for prothallus propagation were identified by culturing 300 mg of prothalli in $1/4{\times}$, $1/2{\times}$, $1{\times}$, $2{\times}$ MS medium and in Knop medium for 8 weeks. Also, the prothalli were cultured by chopping with a scalpel. In addition, sucrose, activated charcoal, and total nitrogen source were added in different concentrations based on the culture medium selected. Cultures were maintained at a temperature of $25{\pm}1^{\circ}C$, light intensity of $30{\times}1.0{\mu}mol-m-2{\cdot}s-1$, and a photoperiod of 16/8 h (light/dark) in in vitro. The results showed that optimum was achieved prothallus fresh weight and development in $1{\times}$ MS medium. When other components were added to the basic $1{\times}$ MS medium, prothallus propagation was maximized in $1{\times}$ MS medium supplemented with 2% sucrose, 0.2% activated charcoal, and 60 mM total nitrogen. To select a suitable soil mixture for sporophyte formation, 1.0 g of prothallus was blended with distilled water, spread on five combinations of different soil substrates (decomposed granite, horticultural substrates, peat moss, and perlite), and cultivated for 12 weeks. The sporophyte cultures were maintained at a temperature of $25{\pm}1^{\circ}C$, light intensity of $43{\pm}2.0{\mu}mol-m-2{\cdot}s-1$, humidity of $84{\pm}1.4%$, and a photoperiod of 16/8 h (light/dark). As a results, horticultural substrate alone, 2:1 (v:v) mixtures of horticultural substrate and perlite, and 2:1 mixtures of horticultural substrate and decomposed granite induced 208.0, 201.3 and 248.8 sporophytes per pot, respectively. Therefore, this result could provide a practical mass propagation method of D. pycnosora

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.2
• /
• pp.34-38
• /
• 2002

This studies were performed to determine the effects of indoor relative humidity conditions on the growth of Arachniodes aristata and Pyrrosia lingua in native fern and investigate an applicable possibility of indoor plants. The response of Arachniodes aristata and Pyrrosia lingua was evaluated in growth chamber (KG-8407-87) to 3 relative humidity and 3 soils. Relative humidity was applied to 25%, 50%, 90%; soils were prepared based on soil mixture(SM), top field soil(TF), masa soil(MS). Results of experiments are as follows ; 1. Under a low humidity condition, such as 25%, Water contents, chlorophyll content, ornamental value of Arachniodes aristata and Pyrrosia lingua decreased much more a 50-90%. 2. The growth of Arachniodes aristata were best in pots under a soil mixture(SM) but Pyrrosia lingua were field top soil(FT) under 25%. It seemed that Pyrrosia lingua due to tolerance of desiccation more than Arachniodes aristata. Though these studies, coefficient of relative humidity and soil was plays an important role in Arachniodes aristata and Pyrrosia lingua growth in indoor environments.