• Journal of Korea Spatial Information System Society
• /
• v.5 no.2 s.10
• /
• pp.83-89
• /
• 2003

In this study, a new coded targets that being suitable for a Mobile Mapping System and method of automated target recognition and coordinates determination of center point was developed, the purpose of a Mobile Mapping System is acquisition and logging data around the road for the camera calibration and the Exterior orientation of system, target installed previously and CCD cameras captured the image, target center point was observed by hands, but using coded target, target recognition and center point observation process will be automated effectively, in addition we keeped up the consistency of photo coordinates observation.

• Transactions of Materials Processing
• /
• v.29 no.1
• /
• pp.44-48
• /
• 2020

Aluminum nitride (AlN), as a substrate material in electronic packaging, has attracted considerable attention over the last few decades because of its excellent properties, which include high thermal conductivity, a coefficient of thermal expansion that matches well with that of silicon, and a moderately low dielectric constant. AlN films with c-axis orientation and thermal conductivity characteristics were deposited by using Pulsed Laser Deposition (PLD). The epitaxial AlN films were grown on sapphire (c-Al₂O₃) single crystals by PLD with AlN target and Y₂O₃ doped AlN target. A comparison of different targets associated with AlN films deposited by PLD was presented with particular emphasis on thermal conductivity properties. The quality of AlN films was found to strongly depend on the growth temperature that was exerted during deposition. AlN thin films deposited using Y₂O₃-AlN targets doped with sintering additives showed relatively higher thermal conductivity than while using pure AlN targets. AlN thin films deposited at 600℃ were confirmed to have highly c-axis orientation and thermal conductivity of 39.413 W/mK.

• Korean Journal Plant Pathology
• /
• v.11 no.1
• /
• pp.66-72
• /
• 1995

The coat protein (CP) gene of cucumber mosaic virus-As (CMV-As) strain was engineered for expression in the plant by using the cauliflower mosaic virus 35S transcript regulatory sequences. The CP gene was cloned into an Agrobacterium-derived binary vector. A chimeric gene was constructed by the cDNA of CMV-As CP and plant expression vector pBI121. The clone, pCMAS66, was first introduced into the phagemid vector pSPORT1 for situating sense orientation for translation and making restriction sites in order to re-introduce plant expression vector, pHI121. The resulting subclone pCASCP02 and plant expression vector pBI121 were treated with BamHI-SacI for excising the target gene and removing GUS gene, respectively. After Agrobacterium transformation by freeze-thaw technique, the clone, pCMASCP121-123 which contains sense orientation of the target gene, was selected and confirmed by restriction endonuclease analysis. The CMV-As CP gene was introduced into A. tumefaciens. The results on tobacco plant transformation with the vector system revealed that the system could be successfully introduced and showed high frequency of selection to putative transformations.

• Korean Journal of Human Ecology
• /
• v.24 no.1
• /
• pp.79-96
• /
• 2015

The purpose of this research was to analyze the clothing behavioral attributes of male music enthusiasts. A questionnaire was developed based on previous researches. Respondents were men who were concerned with music in terms of a job, a major or a hobby. A total of 200 responses were analyzed by SPSS 20.0 through factor analysis with Varimax rotation, ANOVA with post-hoc test(SNK-test) and ${\chi}^2$-test. Music preference was classified into 3 factors: New age/jazz, Hiphop/dance, and Metal rock/ballad factor. 5 Clothing purchasing orientation factors were extruded: hedonic, planned, convenience, brand pursued, and fashion pursued purchasing orientation. Using those factor scores, 3 groups were classified: Group1(G1), preferring Hiphop/dance music with lower hedonic and brand/fashion pursued purchasing orientation; G2, preferring Hiphop/dance music with no interest in clothing shopping and fashion; G3, preferring New age music with high convenience and brand pursued purchasing orientation. In addition, there were significant differences among groups in clothing behavior such as social ostentation, individuality, self-expression, fashionability, conformity; in purchase motivation such as hedonic and trend/designer oriented purchase motivation; in information source like advertisement/media source; and in store choice criteria such as store light/music and popularity. The findings showed even the enthusiasts for the same music showed the different sopping orientation and different clothing behavior, suggesting that a personal value or taste can be a plausible factor to figure out attributes of consumers. An interest/involvement in clothing could be helpful to subdivide the music enthusiasts as the target market.

• The Research Journal of the Costume Culture
• /
• v.25 no.4
• /
• pp.433-447
• /
• 2017

This study reveals the components of college women's shopping orientations and compares the attributes of shoes accordingly. This study attempts to investigate the needs of consumers in the target market of young women by comparing the importance of shoe attributes with their shopping orientations and to provide basic data for efficient marketing strategies which could increase sales. Data was collected using a questionnaire survey. Of a total of 330 questionnaires, 319 were used for statistical analysis. The survey was carried out from July to August 2016. The 17 shopping orientation-related questions and 13 questions about shoe purchase attributes were measured using a five-point Likert Scale. SPSS 23 was used to carry out: descriptives, factor analysis, reliability analysis, cluster analysis, ANOVA, and Duncan's test. Shopping orientations were divided between brand orientation, pleasure orientation, trend orientation and utilitarian orientation. Shoe attributes were categorized into ostentation value, product value, economic value and aesthetic value. College women were divided into the following groups: active shopping, passive shopping, rational shopping and conforming shopping. According to the comparison of the importance of shoe attributes by consumer type among college women, a significant difference by group was found in ostentation value and aesthetic value only. Furthermore, the average scores on the importance of product value and economic value were very high without significant differences between groups. The study results would be available as basic data to help improving the visual image of shoes and product quality for brands targeting young women in the fashion industry.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.202-203
• /
• 2006

In the AC PDP, the MgO film is used as electrode protective film. This film must provide excellent ion bombardment protection, high secondary electron emission, and should be high transparent to visible radiation. In this study, we investigated the relations between the crystal orientation and e-beam evaporation process parameters. The crystal orientation of the MgO layer depends on the conditions of deposition. The parameters are the thickness of the MgO film $1000{\AA}-6500{\AA}$, the deposition rate $200{\AA}/min{\sim}440{\AA}/min$, the temperature $150^{\circ}C{\sim}250^{\circ}C$, and the distance between crucible and substrate 11cm ${\sim}$ 14cm. The temperature of substrate and evaporation rate of source material, or deposition rate of the film, are definitely related to the crystal orientation of the MgO thin film. The crystal orientation can be changed by the distance between the target(MgO tablet) and the substrate. However, the crystal orientation is not much affected by the thickness of MgO thin film.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.142-142
• /
• 2011

Epitaxial $CuCrO_2$ thin films have been grown on single crystal substrate of c-plane $Al_2O_3$, $SrTiO_3$, YSZ and Quarts by laser ablation of a $CuCrO_2$ target using 266nm radiation from a Nd:YAG laser. X-ray measurements indicate that the $CuCrO_2$ grows epitaxially on all substrate, with its orientation dependent on the kinds of substrates. Most of the layer were polycrystalline with (001), (015) and random as the dominant surface orientation on c-plane YSZ, $SrTiO_3$ and quarts substrate, respectively. (001) orientated $CuCrO_2$ grows on C-plane $Al_2O_3$ and YSZ substrate, (015) orientated $CuCrO_2$ films are found on c-plane $SrTiO_3$ substrate and random orientated $CuCrO_2$ films grows on quarts substrate. These data are compared with the in-plane orientation and the mismatch of the $CuCrO_2$ and each substrate lattices in an attempt to relate the preferred orientation to the plane of the sapphire on which it is grown. Further characterization show that the grain size of the films increases for a substrate temperature increase, whereas the electrical properties of $CuCrO_2$ thin films depend upon their crystalline orientation.

• Korean Journal of Remote Sensing
• /
• v.19 no.6
• /
• pp.431-445
• /
• 2003

In this paper, we experimentally investigated the precision of 3D positioning using 4S-Van images in photograrmmetric perspective. The 3D calibration target was built over building facade outside and was captured separately by two CCD cameras installed in 4S-Van. After then, we determined the interior orientation parameter for each CCD camera through self-calibration technique. With the interior orientation parameter computed, the bundle adjustment was performed to obtain the exterior orientation parameters simultaneously for two CCD cameras using calibration target image and object coordinates. The reverse lens distortion coefficients were computed and acquired by least squares method so as to introduce lens distortion into epipolar line. It was shown that the reverse lens distortion coefficients could transform image coordinates into lens distorted image coordinates within about 0.5 pixel. The proposed semi-automatic matching scheme incorporated with lens distorted epipolar line was implemented with scene images captured by 4S-Van in moving. The experimental results showed that the precision of 3D positioning from 4S-Van images in photograrmmetric perspective is within 2cm in the range of 20m from the camera.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.915-919
• /
• 2003

This paper presents a fuzzy-motion-control based tracking algorithm of mobile robots, which uses the geometrical information derived from the active stereo-vision system mounted on the mobile robot. The active stereo-vision system consists of two color cameras that rotates in two angular dimensions. With the stereo-vision system, the center position and depth information of the target object can be calculated. The proposed fuzzy motion controller is used to calculate the tracking velocity and angular position of the mobile robot, which makes the mobile robot keep following the object with a constant distance and orientation.

• Ocean Systems Engineering
• /
• v.1 no.3
• /
• pp.195-205
• /
• 2011

A method for calibrating a laser profiling system for seafloor micro-topography measurements is described. The system consists of a digital camera and an arrangement of six red lasers that are mounted as a unit on a remotely operated vehicle (ROV). The lasers project as parallel planes onto the seafloor, creating profiles of the local topography that are interpreted from the digital camera image. The goal of the calibration was to determine the plane equations for the six lasers relative to the camera. This was accomplished in two stages. First, distortions in the digital image were corrected using an interpolation method based on a virtual pinhole camera model. Then, the laser planes were determined according to their intersections with a calibration target. The position and orientation of the target were obtained by a registration process. The selection of the target shape and size was found to be critical to a successful calibration at sea, due to the limitations in the manoeuvrability of the ROV.