• Bulletin of the Korean Chemical Society
• /
• v.23 no.9
• /
• pp.1213-1221
• /
• 2002

Friedel-Crafts alkylation reaction of an isomeric mixture of 1,2,3,4,5,6,7,8- (2) and 1,2,3,4,5,6,7,8-octahydrophenanthrene (2') with excess vinylchlorosilanes such as vinyl(methyl)dichlorosilane (1a) and vinyltrichlorosilane (1b) in the presence of aluminum chloride catalyst at 80 $^{\circ}C$ gives only one dialkylated products, 9,10-bis[2-(chlorosilyl)ethyl]-1,2,3,4,5,6,7,8-octahydroanthrenes [(Cl2XSiCH2CH2)2C14H16: X = Me (4a), Cl (4b)] in good yields, but 9,10-bis[2-(chlorosilyl)ethyl]-1,2,3,4,5,6,7,8-octahydrophenanthrenes are not obtained. However, monoalkylation of 2 with 1 affords a mixture of both isomeric compounds, 9-[2-(chlorosilyl)ethyl]-1,2,3,4,5,6,7,8-octahydroanthracenes 3 and -phenanthrenes 3'. The yield of product 3' is always higher than that of 3. When a mixture of 3 and 3' is alkylated again with 1, only product 4 without phenanthrene type compounds is obtained, indicating that the isomerizations between 2 and 2', or 3 and 3'occur under the alkylation condition. The alkylation with dimethylvinylchlorosilane or trimethylvinylsilane did not proceed. The structure of 4a is determined by X-ray single crystal diffraction analysis.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.3
• /
• pp.358-362
• /
• 1998

A series of six-membered ring organosilicon compounds, 1-aryl-1-(1H-1,2,4-triazol-1-yl)alkyl-1-silacyclohexanes 3a-c, have been synthesized by four-step reactions starting from 1-(chloroalkyl)trichlorosilanes. Their fungicidal activities were tested in in vitro for ten fungi and in vivo assay for four fungi occurring in rice, barley, tomato, and etc. and compared with the flusilazole. Especially, 1-p-fluorophenyl-1-[1-(1H-1,2,4-triazol-1-yl)alkyl]-1-silacyclohexanes (3a, alkyl=methyl; 3b, alkyl=ethyl) showed good fungicidal activity with broad spectrum close to the flusilazole in in vivo assay.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.9
• /
• pp.793-802
• /
• 2009

Adsorption properties were estimated for the organic silicon compounds (siloxanes) in an actual landfill gas (LFG) using adsorbents such as coconut activated carbon, coal activated carbon, silica gel, sulfur adsorbent, carbonized sludge, and molecular sieve 13X. Coconut activated carbon showed the highest removal efficiency of more than 95%. The desorption of hexamethyldisiloxane (L2) from the adsorbent, however, resulted in the remarkable concentration variation of the compound in the treated gas. Silica gel, which had high adsorption capacity for L2 in single substance adsorption experiment in the other study, could not remove the component in the actual landfill gas while it adsorbed well octamethylcyclotetrasiloxane (D4) and decamethylcyclopentasiloxane (D5) in the LFG. Therefore the elimination of hexamethyldisiloxane is an important factor to determine the level of total organosilicon compound in pretreated landfill gas. Moreover, the L2 from the actual landfill gas was effectively adsorbed by the serial adsorption test using two columns packed with coconut activated carbon which has the great capacity of siloxanes removal among others. In order to utilize efficiently LFG as a renewable energy, the emission and adsorptive characteristics of the substance to be treated should be considered for the organization, operation, and management of pretreatment process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.122-122
• /
• 1999

Graphite with its advantages of high thermal conductivity, low thermal expansion coefficient, and low elasticity, has been widely used as a structural material for high temperature. However, graphite can easily react with oxygen at even low temperature as 40$0^{\circ}C$, resulting in CO2 formation. In order to apply the graphite to high temperature structural material, therefore, it is necessary to improve its oxidation resistive property. Silicon Carbide (SiC) is a semiconductor material for high-temperature, radiation-resistant, and high power/high frequency electronic devices due to its excellent properties. Conventional chemical vapor deposited SiC films has also been widely used as a coating materials for structural applications because of its outstanding properties such as high thermal conductivity, high microhardness, good chemical resistant for oxidation. Therefore, SiC with similar thermal expansion coefficient as graphite is recently considered to be a g행 candidate material for protective coating operating at high temperature, corrosive, and high-wear environments. Due to large lattice mismatch (~50%), however, it was very difficult to grow thick SiC layer on graphite surface. In theis study, we have deposited thick SiC thin films on graphite substrates at temperature range of 700-85$0^{\circ}C$ using single molecular precursors by both thermal MOCVD and PEMOCVD methods for oxidation protection wear and tribological coating . Two organosilicon compounds such as diethylmethylsilane (EDMS), (Et)2SiH(CH3), and hexamethyldisilane (HMDS),(CH3)Si-Si(CH3)3, were utilized as single source precursors, and hydrogen and Ar were used as a bubbler and carrier gas. Polycrystalline cubic SiC protective layers in [110] direction were successfully grown on graphite substrates at temperature as low as 80$0^{\circ}C$ from HMDS by PEMOCVD. In the case of thermal MOCVD, on the other hand, only amorphous SiC layers were obtained with either HMDS or DMS at 85$0^{\circ}C$. We compared the difference of crystal quality and physical properties of the PEMOCVD was highly effective process in improving the characteristics of the a SiC protective layers grown by thermal MOCVD and PEMOCVD method and confirmed that PEMOCVD was highly effective process in improving the characteristics of the SiC layer properties compared to those grown by thermal MOCVD. The as-grown samples were characterized in situ with OES and RGA and ex situ with XRD, XPS, and SEM. The mechanical and oxidation-resistant properties have been checked. The optimum SiC film was obtained at 85$0^{\circ}C$ and RF power of 200W. The maximum deposition rate and microhardness are 2$mu extrm{m}$/h and 4,336kg/mm2 Hv, respectively. The hardness was strongly influenced with the stoichiometry of SiC protective layers.