• Geomechanics and Engineering
• /
• v.1 no.4
• /
• pp.291-306
• /
• 2009

One-dimensional soil-column studies were carried out to understand the interaction of three industrial effluents namely amino acid ('highly acidic'), surfactant ('highly organic') and pharmaceutical ('organic and toxic') on the physicochemical behavior, index properties and shear strength of bentonite due to artificial contamination extending to nearly 300 days. Changes in inorganic and organic pollutants present in the effluents due to the interaction of the above effluents and soil were assessed to understand the physico-chemical behaviour. Batch and continuous modes of operation, 8 hrs and 16 hrs Hydraulic Retention Time [HRT] and 25%, 50% concentrations of effluents, were the parameters considered. Amino acid, surfactant and pharmaceutical effluents have shown a high variation in pH (7 to 8) after artificial contamination on bentonite that is their original characteristics of the above effluents have been completely reversed. Further, it is found that the shear strength of bentonite has reduced by about 20%, and with respect to liquid limit and plastic limit shows an increasing trend with time within the period of contamination.

• Proceedings of the SCSK Conference
• /
• 2003.09a
• /
• pp.178-191
• /
• 2003

OMC is essentialiy necessary compound in sun goods as organic UV protecting products. But the skin-trouble problem is raising because of skin penetration of OMC. In this study, non-capsulated pure OMC was compared with Organic-Inorganic-Nano-hybrid OMC for skin penetration force and SPF degree. Organic- Inorganic Nano-Hybrid OMC is OMC trapped in the pore of the mesoporous silica synthesized by the sol-gel method after OMC is nanoemulsified in the system of the hydrogenated Lecithin/ Ethanol/caprylic/capric triglyceride/OMC/water. OMC- nano- emulsion was obtained by a microfluidizing process at 1000bar and then micelle size in the nanoemulsion solution is 100-200nm range. Mesoporous silica nano-hybrid OMC was prepared by the process; surfactant was added in dissolved OMC-Nanoemulsion, then the rod Micelle was formed. OMC-nanoemulsion was capsulated in this rod Micelle and then silica precursor was added in the OMC-nanoemulsion solution. Through the hydrolysis reaction of the silica precursor, mesoporous silica concluding OMC-Nanocapsulation was obtained. The nano-hybrid surface of this OMC-Nanoemulsion-Inorganic system was treated with polyalkyl-silane compound. OMC-Mesoporous silica Nano-hybrids coated with polyalkyl-silane compound show the higher sun protecting factor (SPF Analyzer: INDEX 10-15) than pure OMC and could reduce a skin penetration of OMC. The physico-chemical properties of these nano-hybrids measured on the SPF index, partical size, strcture, specific surface area, pore size, morphology, UV absorption, rate of the OMC dissolution using SPF Analyzer, Laser light scattering system, XRD, BET, SEM, chroma Meter, HPLC, Image analyzer, microfluidizer, UV/VIS. spectrometer.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.388-394
• /
• 2014

Inorganic-organic hybrid coating solutions were synthesized using titania sol from titanium isopropoxide (TTIP) as an inorganic component and mixture of two or three types of silane coupling agents, such as methacryloxypropyl trimethoxysilane (MPTMS), aminopropyl triethoxysilane (APS), glycidoxypropyl trimethoxysilane (GPTMS) and vinyltriethoxysilane (VTES) as an organic component. The hard coating films were obtained by spin-coating on the polycarbonate sheets and curing the inorganic-organic hybrid coating solutions. The coating films made from the mixture of two types of silane coupling agents showed poor pencil hardness and adhesion, while those from the mixture of three types of silane coupling agents exhibited an improved pencil hardness of 2H~4H and adhesion of 5B. The refractive indexes of coating films were increased from 1.56 to 1.63 at 550 nm by increasing the content of titania sols from 20 to 30 g.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.6
• /
• pp.759-771
• /
• 2011

We evaluated the pollution levels of organic matter and metallic element (Fe, Cu, Pb, Zn, Cd, Ni, Cr, Mn, As, and Hg) in the intertidal surface sediments of Aphae Island using several sediment quality guidelines (SQGs) and assessment techniques for sediment pollution. Based on the textural composition of sediment, the surface sediments were classified into two main sedimentary facies: slightly gravelly mud and silt. The concentrations of chemical oxygen demand (COD) and acid volatile sulfide (AVS) in the sediments ranged from 4.6-9.9 (mean $7.4{\pm}1.1$) $mgO_2/g{\cdot}dry$ and from ND-0.53 (mean $0.04{\pm}0.10$) mgS/$g{\cdot}dry$, respectively. These values were considerably lower than those reported from a farming area in a semi-enclosed bay of Korea and for SQGs in Japan. The metallic element concentrations in the sediments varied widely with the mean grain size and organic matter content, implying that the concentrations of metallic elements are influenced mainly by secondary factors, such as bioturbation, the resuspension of sediment, and anthropogenic input. The overall results for the comparison with SQGs, enrichment factor (EF), and geoaccumulation index ($I_{geo}$) indicate that the surface sediments are slightly polluted by Cr and Ni, and moderately polluted by As. Our results suggest that the intertidal surface sediments of Aphae Island are not polluted by organic matter or metallic elements and the benthic conditions are suitable for healthy organisms.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.10
• /
• pp.817-821
• /
• 2011

We have proposed an optical thin film and micro lens to improve the luminance of organic light emitting device. The first method, optical thin film was calculated refractive index of dielectric layer material that was modulated refractive index of organic material, ITO (indium tin oxide)and glass. The second method, microlens was applied with lenses on the organic device. Optical thin films were designed with Macleod Simulator and Micro Lenses were calculated by FDTD (finite-difference time-domain) solution. The structure of thin film was designed in organic material/ITO/dielectric layer/glass. The lenses size, height and distance were 5 ${\mu}m$, 1 ${\mu}m$, 1 ${\mu}m$, respectively. The material of micro lenses used silicon dioxide. Result, The highest luminance of OLED which applied with microlens was 11,185 $cd/m^2$, when approval voltage was 14.5 V, applied thin film was 5,857 $cd/m^2$. The device efficiency applying microlens increased 3 times than the device which does not apply microlens.

• Journal of the Korean Society of Safety
• /
• v.14 no.2
• /
• pp.103-108
• /
• 1999

This study focused on risk assessment for inhalation of airborne volatile organic compounds (VOCs) in Ulsan industrial complex area. For non-carcinogenic risk, even the highest hazard index of toluene was estimated to be $4.8\times10^{-2}$, which was much lower than 1. The total hazard index of VOCs was estimated to be $5.8\times10^{-2}$. However, lifetime average cancer risk from the inhalation of airborne VOCs was estimated to be about $1.1\times10^{-3}/$, which was much higher than a risk standard of $10^{-5}$. The risk of $4.4\times10^{-5}$. came from benzene, the only human carcinogen among VOCs, while that of $1.05\times10^{-3}$ from probable human carcinogens including 1,3-butadiene and 1,2-dichloroethane. About 70% and 20% of total VOC cancer risk was due to the inhalation of 1,3-butadiene and 1,2-dichloroethane, respectively. Therefore, proper risk management of these 3 VOCs was required for the protection of health from cancer burden in Ulsan industrial complex area.

• Proceedings of the Korea Society of Environmental Biology Conference
• /
• 2004.05a
• /
• pp.24-24
• /
• 2004

This study was investigated to the seasonal variation of attached diatoms communities in the Hantan River in November 2001, February, Ma and August 2002. It was identified the total 107 taxa which were composed of 95 species, 11 varieties and 1 unidentified speCies. The standing crops ranged 298,5004,776,000cells${\cdot}cm^{-2}.$and showed marked irregularly seasonal variations. It was higher value at the lower station than the upper station in fall. But it was similar values from the upper to the lower station by the effect of typhoon in summer. Chlorophyll concentrations ranged $13.4~304.2{\mu}m{\cdot}cm^{-2}.$ Standing crops and chlorophyll showed similar trends during investigation. Low diversity index values probably indicated the effects of envi~onmental stresses(water temperature, flow and current velocity) other than organic pollution. An assessment of organic pollution using epilithic diatoms(DAlpo) was $\alpha$-oligosaprobic states at the upper and mid stations, and was $\alpha$-mesosaprobic states at the lower stations.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.06a
• /
• pp.121-147
• /
• 1996

Since 1980, the water quality of ultra-pure water has been rapidly improved, and presently ultra-pore water producing equipment for 64Mbit is in operation. Table 1 shows the degree of integration of DRM and required water quality exlmple. The requirements of the ultra-pure water for 64Mbit are resistivity: 18.2 MQ/cm or higher, number of particulates: 1 pc/ml or less (0.05 $\mu$m or larger). bacteria count: 0.1 pc/l or less. TOC (Total Organic Carbon, index of organic snbstance) : 1ppb or less, dissolved oxygen: 5ppb or less, silica: 0.5ppb or less, heavy metal ions: 5ppb or less. The effect of metals on the silicon wafer has been well known, and recently it has been reported that the existence of organic substance in ultra-pure water is closely related to the device defect, drawing attention. It is reported that if organic substance sticks to the natural oxidation film, the oxide film remaims on the organic substance attachment in the hydrofluoric acid treatment (removal of natural oxidation film). The organic substance forms film on the silicon wafer, and harmful elements such as metals and N.P.S., components contained in the organic substance and the bad effect due to the generatinn of silicon carbide cannot be forgotten. In order to remove various impurities in raw water, many technological develoments (membrane, ion exchange, TOC removal, piping material, microanalysis, etc.) have been made with ultra-pure water producing equipment and put to practical use. In this paper, technologies put to practical use in recent ultra-pure vater producing equimeut are introduced.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.3
• /
• pp.119-124
• /
• 2022

Top emission organic light-emitting diode (TEOLED) is commonly used because of high efficiency and good color purity than bottom - emission organic light-emitting device (BEOLED). Unlike BEOLED, TEOLED contain semitransparent metal cathode and capping layer. Because there are many characteristics to consider just simple thickness change, optimizing organic thickness of TEOLED for microcavity is difficult. So, in this study, we optimized Device capping layer at unoptimized micro-cavity structure TEOLED device. And we compare only capping layer with unoptimized microcavity structure can overcome optimized micro-cavity structure device. We used previous our optimized micro-cavity structure to compare each other. As a result, it has been found that the efficiency can be obtained almost the same or higher only capping layer, which is stacked on top of the device and controls only the thickness and refractive index, without complicated structural calculations. This means that higher efficiencies can be obtained more easily in laboratories with limited organic materials or when optimizing new structures etc.

• Journal of environmental and Sanitary engineering
• /
• v.8 no.2
• /
• pp.99-108
• /
• 1993

It is well known that we should take 2L of drinking water per day to maintain our health. The drinking water quality is becoming worse owing to sewage discharge and industrial wastewater. Surface water is polluted by various kinds of contaminants and ground water were known as clean and unpolluted water, but through recent many reports the ground waters are also contaminated by waste disposal and intrusion of organic and bacterial movement. This research was undertaken to make a water index of water contamination by referringcations cations and anions. NH$_{4}$, Fe, Mn, and Pb are chosen as cations and $NO_3$, Cl, and $SO_4$ ions are chosen as anions to make a index, and the following water index was made as the contamination index. (Fe+Mn+Pb)/0.7+$(NH_4+NO_3+Cl+SO_4)$/10.5<6.0 By using ton Chromatography the cations and anions are rapidly analyzed and plotting the analyzed data to the equation, we can easily get the degree of contaminations by avoiding analysis of over 37 water parameters in several days. Of course this index of water contamination is not perfect and detail one, but in case of emergent case or to know the overall trends of contamination, it is convenient to use this index. Among the tested 5 kinds of samples the ground water showed contamination index of 6.87. Authors used the already published healthy index and tasty index and differentiated their degrees in detail.