• Korean Journal of Environmental Biology
• /
• v.33 no.1
• /
• pp.83-91
• /
• 2015

This study is measured the change of chlorophyll-${\alpha}$ concentration and phytoplankton density, the grazing rates (GR) and pseudofaeces production (PFP), by grazing of freshwater apple snail, Pomacea canaliculata, to investigated that the snails are able to control of phytoplankton bloom. The experiments are performed to evaluate the GR and PFP at different conditions such as incubation time (0, 2, 4, 6, 8, 10 and 12 hr), shell height (1.0 to 4.0 cm, n=108), snail density (1, 1.5, 2.5, 3.5 and 5 indiv. $L^{-1}$) and food concentration (200, 400, 600, 800 and $1000{\mu}g$ $L^{-1}$). Regarding feeding time, the highest GR (2.5 L. $gAFDW^{-1}h^{-1}$) and PFP (15.3 mg $AFDW^{-1}$) showed at 4 hr after snail stocking, respectively. The snail, smaller than 1.5 cm in body size, showed the highest of GRs (2.54 L. $gAFDW^{-1}h^{-1}$) for the initial period (2 hr of stocking), compared to those greater than 1.5 cm, which showed a stable FR, higher than 0.099 L. $gAFDW^{-1}h^{-1}$. Upon snail density effect, the density of 5 indiv. $L^{-1}$ induced the most effective inhibition on phytoplankton biomass with the highest PFP. On the food concentration, the highest GR (0.54 L. $gAFDW^{-1}h^{-1}$) and PFP (8.5 mg $gAFDW^{-1}$) were induced at the level of $600{\mu}g$ $L^{-1}$, respectively. We checked that it is possible to control of phytoplankton bloom by the grazing of apple snail as well as Reeve. However, it required a through research for the remove of pseudofaeces and 2nd problem by the decomposition of the organic materals.

• Korean Journal of Soil Science and Fertilizer
• /
• v.10 no.1
• /
• pp.1-6
• /
• 1977

Fifteen soils including volcanic ash, acid sulfate and degraded saline soils were investigated for Languir adsorption isotherm of ammonium using $NH_4H_2PO_4$. The results are as follows. Languir adsorption maxima of ammonium (LAMA) ranged from 2.4me/100g soil to 12.3 and the average was 5.3. Initial concentration of 30 to 60 or 40 to 80 ppm(as N) appears to be suitable for LAMA measurement. There were two LAMA in some soils. Difference between adsorption constants (bonding energy) was mostly greater than that between LAMA. LAMA ranged from 9.4% to 72% of cation exchange capacity and average was 47%. It did not show any clear tendency with CEC, pH, organic matter content, base saturation percent, P, K, Ca, Mg, Na and Si. Except volcanic ash soils which were grouped into two groups according to ammonium adsorption LAMA was significantly (r=0.951 at 1%) correlated with adsorption at 200ppm. This single concentration seems suitable for LAMA measurement. Probable mechanism of ammonium adsorption was discussed, in which the associated anions were combined with iron and aluminum and then ammonium was bound to phosphorus. Applicability of Langmuir adsorption isotherm model to the soils under field condition was also discussed.

• Journal of Animal Science and Technology
• /
• v.57 no.9
• /
• pp.35.1-35.8
• /
• 2015

Background: An experiment was conducted in Vietnam to test the hypothesis that total dry matter (DM) intake and liveweight (LW) gain would increase in a curvilinear manner with increasing amounts of concentrate offered. Method: There were five treatments: a basal diet of Guinea grass fed at 1 % of LW and rice straw fed ad libitum (T0), or this diet supplemented with concentrate at 0.6 (T1), 1.2 (T2), 1.8 (T3), or 2.4 % of LW (T4). The concentrate comprised locally available ingredients, namely cassava chips, rice bran, crushed rice grain, fishmeal, salt, and urea, mixed manually. Results: Concentrate intake increased from T0 to T3, but there was no difference in concentrate intake between T3 and T4. Total feed intake increased in a curvilinear manner from 4.0 to 6.4 kg DM/d as the quantity of concentrate consumed increased. The substitution of concentrate for grass and rice straw increased with increasing consumption of concentrate and was as high as 0.49 kg DM reduction per kg of concentrate consumed. LW gain increased curvilinearly, with significant differences between T0 (0.092 kg/d), T1 (0.58 kg/d) and T2 (0.79 kg/d); but there were no significant differences in LW gain between T2, T3 (0.83 kg/d) and T4 (0.94 kg/d).With increasing amount of concentrate in the diet, the digestibilities of dry matter, organic matter, crude protein, and crude fat increased, but NDF digestibility decreased. Conclusion: Based on these results, young Vietnamese Brahman-cross growing cattle will respond to a locally-sourced concentrate mix offered at a level of up to 1.2 % of LW.

• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.237-244
• /
• 1996

Liquid-liquid extractions by use of microporous hollow fiber modules are fast compared with conventional extraction equipment because of the large surface area per volume. In these modules, the extractant and feed can be contacted at high speed and two flows are completely independent, so there are no problems with loading and channeling. In this paper, it was investigated the extraction selectivities for liquid-liquid extraction of Fe(II) and Ni(II) from dilute aqueous solution into TOA (tri-n-octylamine) and EHPNA (bis(2-ethylhexyle)hydrogenphosphite) as organic extractants by using the hydrophobic hollow fiber module. To determine the rate controlling step for mass transfer in hollow fibers, we also examined the effect of inside and outside flow rates of the hollow fiber module. From these experiments, we identified for the extraction of system with high partition coefficient in hydrophobic hollow fibers, mass transfer in the inside aqueous feed dominated the overall mass transfer, and in this paper, correlation between $K_w$ and $v_t$ was obtained as $K_w{\frac{d}{D}}=6.22\(\frac{d^2v_t}{LD}\)^{1/3}$ On the other hand, for the system with low partition coefficient, the resistance in the inside of hollow fibers was much less than membrane resistance because the extraction was not simple in the micropore. Thus, for systems with high partition coefficients, hydrophobic hollow fibers would be a better choice.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.183-183
• /
• 2015

Indium tin oxide (ITO)는 넓은 밴드갭을 가지는 n-type의 축퇴 반도체로 태양전지, 스마트윈도우, 터치 센서, organic light emitting displays (OLEDs) 등에 널리 적용된다. 최근 touch screen panels (TSPs)의 높은 전기적 특성 및 고해상도 요구에 따라 고품질 ITO 박막개발의 수요도 증가하는 추세이다. 지금까지 ITO 박막의 물성 및 기계적 특성에 관한 많은 연구가 진행되어 왔지만 ITO 초박막 에서의 근본적인 물성 변화에 대한 연구는 미흡한 실정이므로, 이러한 연구는 필수적이라 할 수 있다. ITO 초박막은 광학적 특성은 우수하나, 낮은 결정성으로 인해 전기적 특성이 나쁘다는 단점을 가지며, 이러한 ITO 박막의 결정성은 초기 박막 성장과정에 많은 영향을 받는다. ITO 박막의 초기성장과정은 핵이 생성된 후(nucleation), 각각의 위치에서 성장하게 되고(growth), 합쳐지면서(coalescence) 연속적인 막을 형성 하는데(continuous), 이러한 초기 박막 성장 과정 중에 핵 생성 밀도를 증가시키고 박막이 연속적으로 되는 두께를 감소시킨다면, 더욱 더 고품질의 ITO 초박막을 얻을 수 있을 것이다. 따라서, 본 연구에서는 박막 초기 형성 과정 중 섬들이 합체되는 두께를 최소화시키기 위하여 EMF(electromagnetic field strength) 시스템을 이용하였다. EMF 시스템은 DC 캐소드에 전자석 코일을 장착하여 전자기장을 추가로 부가한 것으로, 이를 이용할 경우 스퍼터 원자가 중성상태로 기판에 도달하는 것이 아니라, 이온화되어 Vp-Vf의 차이로 가속되어 추가적인 에너지를 공급받음으로써 기판표면상에서 확산을 촉진시키므로 박막이 연속적으로 되는 임계 두께를 감소시킬 수 있는 것으로 기대된다. 실험은 실온에서 DC 마그네트론 스퍼터링법을 이용하였으며, 유리기판위에 4, 6, 8, 10, 12, 20 nm의 두께로 ITO 박막을 제작하였다. 스퍼터링 파워는 150 W (3.29 W/cm3), 작업 압력은 0.13 Pa, 기판과 타깃 사이의 거리는 70 mm였다. 각각의 두께에서 EMF 파워 0, 5, 10, 15, 20, 25, 30 W로 인가하여 박막을 제작한 후, EMF 파워에 따른 ITO 박막의 초기 성장 과정중 표면상태를 AFM (atomic force microscope) 이미지를 통하여 관찰하였다. 또한, 두께 약 8 nm에서와 20 nm일 때의 전기적 특성 및 광학적 특성을 관찰하였으며, 두 박막 모두 EMF 파워 15 W를 인가하였을 때 그 특성이 가장 향상되는 것을 확인하였다. 이러한 결과를 통하여 박막은 초기 성장이 중요하므로, 매우 얇은 두께에서 좋은 특성을 가진 박막을 제작하여야 박막의 두께를 증가시켰을 때도 좋은 특성의 막을 얻을 수 있음을 알 수 있었다. 또한, EMF 파워를 증가시킴에 따라 자장강도를 증가시키는 것과 같은 효과 즉, 플라즈마 임피던스가 감소하는 효과를 내어 증착 중 고 에너지 입자 (Ar0, O-)에 의한 박막손상이 감소한 것으로 판단된다. 따라서 적정 EMF 파워 15 W를 인가하였을때 가장 물성이 좋은 ITO 박막을 얻을 수 있었다. 즉, EMF 시스템을 이용하여 저온 공정에서 결함농도가 적은 고품질의 ITO 초박막을 제작할 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.65-65
• /
• 2015

In this talk, I will introduce two topics. The first topic is the polymer light emitting diodes (PLEDs) using graphene oxide quantum dots as emissive center. More specifically, the energy transfer mechanism as well as the origin of white electroluminescence in the PLED were investigated. The second topic is the facile synthesis of eco-friendly III-V colloidal quantum dots and their application to light emitting diodes. Polymer (organic) light emitting diodes (PLEDs) using quantum dots (QDs) as emissive materials have received much attention as promising components for next-generation displays. Despite their outstanding properties, toxic and hazardous nature of QDs is a serious impediment to their use in future eco-friendly opto-electronic device applications. Owing to the desires to develop new types of nanomaterial without health and environmental effects but with strong opto-electrical properties similar to QDs, graphene quantum dots (GQDs) have attracted great interest as promising luminophores. However, the origin of electroluminescence (EL) from GQDs incorporated PLEDs is unclear. Herein, we synthesized graphene oxide quantum dots (GOQDs) using a modified hydrothermal deoxidization method and characterized the PLED performance using GOQDs blended poly(N-vinyl carbazole) (PVK) as emissive layer. Simple device structure was used to reveal the origin of EL by excluding the contribution of and contamination from other layers. The energy transfer and interaction between the PVK host and GOQDs guest were investigated using steady-state PL, time-correlated single photon counting (TCSPC) and density functional theory (DFT) calculations. Experiments revealed that white EL emission from the PLED originated from the hybridized GOQD-PVK complex emission with the contributions from the individual GOQDs and PVK emissions. (Sci Rep., 5, 11032, 2015). New III-V colloidal quantum dots (CQDs) were synthesized using the hot-injection method and the QD-light emitting diodes (QLEDs) using these CQDs as emissive layer were demonstrated for the first time. The band gaps of the III-V CQDs were varied by varying the metal fraction and by particle size control. The X-ray absorption fine structure (XAFS) results show that the crystal states of the III-V CQDs consist of multi-phase states; multi-peak photoluminescence (PL) resulted from these multi-phase states. Inverted structured QLED shows green EL emission and a maximum luminance of ~45 cd/m2. This result shows that III-V CQDs can be a good substitute for conventional cadmium-containing CQDs in various opto-electronic applications, e.g., eco-friendly displays. (Un-published results).

• Journal of Animal Environmental Science
• /
• v.10 no.3
• /
• pp.163-168
• /
• 2004

This research was carried out to investigate the moisture evaporation and property change depenging on the composting temperature for the escalator reversing composting system. The system was supported by the Y livestock cooperative composting factory. According to the test, the composting remperature eas varied in the range of $65\~80^{\circ}C$. The water content was de-creased to $75\%$ and became about $60\%$ at the end of the phase. Total nitrogen became $0.58\%$, total phosphoric acid $1.47\%$ and potashium $0.49\%$ at the end of the phase.

• Korean Journal Plant Pathology
• /
• v.1 no.1
• /
• pp.72-78
• /
• 1985

The effects of temperature. pH, carbon and nitrogen sources on the growth of Rhizoctonia solani were studied by using five hyphal anastomosis groups(four cultural types, 7 isolates) of the fungus. The ranges of optimum temperature were $20^{\circ}C$ in the AG 2-1, AG 2-2 and AG 4, and $25^{\circ}C$ in the AG 1-IA, AG 1-IB, AG 3, AG 5. The optimum pH for the mycelial growth was 6-7 in the fungus. Glucose in the AG 1-lA, AG 1-IB, AG 2-2, AG 3 and AG 5, sucrose in the AG 2-1 and fructose in the AG 4 were the most effective for the mycelial growth, but glycerine, cellulose and lactose were not effectively utilized as nutrients. $Ca(NO_3)_2$ in the AG 1-IA, AG 1-IB and AG 4, asparagine in the AG 2-1, $KNO_3$ in the AG 2-2 and $NaNO_3$ in the AG 5 were the best nitrogen sources for the mycelial growth, but $NH_4NO_3$ was not easily utilized by the fungus. Nitrate and organic nitrogens for the fungal growth were utilized better than ammonium nitrogen.

• Food Science and Preservation
• /
• v.12 no.6
• /
• pp.600-607
• /
• 2005

This study was conducted to prepare high quality grape seed oils by solvent extraction and chemical refining process. Additionally, quantitative analysis of several functional components in grope seed was carried out to compare quality characteristics of grape seeds from grapes grown by conventional and organic agricultural practices. There are no significant differences in several functional constituents of grape seeds between conventionally cultivated- and organically cultivated-grapes, although some functional compositions of grape seeds are different between two cultivation methods. The dried grape seed was pretreated with roasting heating for 5 min, milled and then extracted twice with n-hexane under reflux at $50^{\circ}C$ for overnight, followed by filtration and evaporation. The crude grape seed oil was successively purified by degumming with $0.1\%\;H_3PO_4$, deaciding with $20\%\;NaOH$, and then decoloring and deodorization by a steam distillation, and thereby producing purified grape seed oil(yield: $5.0\%/dried$ grape seed). Physicochemical characteristics of the purified grape seed oil were comparable to those of the imported grape seed oils.

• Journal of Mushroom
• /
• v.2 no.4
• /
• pp.207-213
• /
• 2004

The results of examining characteristics of mycelial growth and culture condition for determining the condition of artificially culturing Fomitopsis pinicola are as follows. 1) Mycelial growth and density of F. pinicola. were the highest in the medium of PIDA(Pine Dextrose Agar;66.3mm/10d) followed by the order of GDA, PDA, CDA, PODA, ODA, YM, MCM, MEA(pH 4.7), CHA, and MEA(pH 4.7). 2) Optimal temperature for the mycelial growth and density of F. pinicola were shown to be $30^{\circ}C$, but the mycelia were dead at $40^{\circ}C$. the mycelial growth and density of KNAC9005 strains was the highest at $30^{\circ}C$(66.3mm/10d) followed by the order of 25, 20, 15, 35, 10, and $5^{\circ}C$. 3) Optimal pH for the mycelial growth and density of $40^{\circ}C$ was revealed to be 6.0(88.4mm/10d). above or below pH 6.0, the mycelial growth and density were shown to be retarded. 4) Optimal carbon, nitrogen and organic acid sources for the spawn growth of $40^{\circ}C$ were maltose(331mg/25ml/15d), peptone(347mg/25ml/15d), and glutamic acid(357mg/25ml/15d), respectively. Optimal level of biotin was 370mg/15d and optimal C/N ratio was 40.