• Economic and Environmental Geology
• /
• v.30 no.6
• /
• pp.543-551
• /
• 1997

Poongjeon talc deposits is emplaced in dolomite and dolomitic limestone of the Cambro-Ordovician Samtaesan Formation. Ore in Poongjeon is low grade talc and the deposit has been known as the contact metasomatic or hydrothermal replacement type related to the intrusion of late Cretaceous granite in this area. X-ray diffraction, electron microprobe analysis, fluid inclusion and stable isotope analysis were utilized to examine the mineralogy of the ore and the origin of the ore fluid. The ore from Poongjeon mine mainly consists of talc and tremolite with minor amount of illite, vermiculite, smectite, and chlorite-vermiculite mixed layer. Occurrence of ore body indicates that the talc-tremolite ore was formed through the replacement by the $SiO_2$-rich hydrothermal fluid along the bedding and dike boundaries, or contact of amphibolite and basic dike with carbonate rocks. The temperature and pressure of the ore forming fluids at the time of the talc mineralization were estimated as $350^{\circ}C$ and 400 bar, respectively, based on the heating and freezing data of the fluid inclusions in quartz from talc-tremolite veins. During the talc-tremolite formation, fluids were divided into $CO_2$-enriched fluid and $CO_2$-poor fluid from $CO_2$ immiscibility (or effervescence). Oxygen isotope values (${\delta}^{18}O$) of the talc-tremolite fall within a range between 12.2 and 12.9‰. Hydrogen isotope values(${\delta}D$) of the ore range from -60 to -85‰ and $H_2O$ contents range from 2.0 to 3.4 wt.%. ${\delta}^{18}O$ and ${\delta}D$ values of talc ore indicate that the hydrothermal fluid involved in talc-tremolite formation was of igneous origin. Oxygen and hydrogen isotopic exchange between talc ore and the surface water was negligible after talc-tremolite ore formation.

• Economic and Environmental Geology
• /
• v.30 no.1
• /
• pp.15-23
• /
• 1997

Gold mineralization of the Ogkye gold mine was deposited mainly in quartz veins up to 150 cm wide which occupy fissures in Cambrian Pungchon limestone. Ore minerals are relatively simple as follows: pyrite, arsenopyrite, pyrrhotite, sphalerite, electrum and galena. On the basis of the Ag/Au ratio on ore grades, mode of occurrence and assoicated mineral assemblages, the Ogkye gold deposit can be classified as pyrite-type gold deposit (Group IIB). Fluid inclusion data indicate that ore minerals were deposited between $400^{\circ}$and $230^{\circ}C$ from relatively dilute fluids (0.2 to 7.3 wt.% eq. NaCl) containing $CO_2$. The ore mineralization resulted from a complex history of $CO_2$ effervescence and local concomitant boiling coupled with cooling and dilution of ore fluids. Gold deposition was likely a result of decrease of sulfur activity caused by sulfide deposition and/or $H_2S$ loss accompanying fluid unmixing. Sulfur isotope compositions of sulfide minerals (${\delta}^{34}S=3.5{\sim}5.9$‰) are consistent with ${\delta}^{34}S_{H_2S}$ value of 4.8 to 6.1‰, suggesting mainly an igneous source of sulfur partially mixed with wall-rock sulfur.

• Economic and Environmental Geology
• /
• v.17 no.4
• /
• pp.245-258
• /
• 1984

Geoje copper ore deposits are fissure filled copper veins which developed in late Cretaceous pyroclastics, andesite and shale. Mineral paragenesis reveals a division of the hydrothermal mineralization into three stages: Stage I, deposition of pyrite, magnetite, specularite, quartz and chlorite; Stage II, deposition of chalcopyrite, sphalerite, galena, tetrahedrite, aikinite, cosalite, electrum, quartz and chlorite; Stage III, deposition of barren calcite. Filling temperatures of fluid inclusions in quartz of stage I range from 171 to $282^{\circ}C$ whereas fluid inclusions in quartz and sphalerite of stage II range from 213 to $262^{\circ}C$ and from 186 to $301^{\circ}C$ respectively. Salinities of fluid inclusions in quartz of stage I range from 5.2 to 11.2 weight percent equivalent to NaCl. Salinities of fluid inclusions in quartz and sphalerite of stage II range from 6.6 to 10.9 and from 7.1 to 14.4 weight percent equivalent NaCl. Salinities of ore fluid during major mineralization stage in this deposits reveal nearly the same ranges as those of many copper deposits in Koseong copper mining district which located about 30km apart from Geoje mine. But filling temperatures of fluid inclusions formed during major copper mineralization stage in this deposits show slightly lower than those of copper deposits in Koseong copper mining district.

• Economic and Environmental Geology
• /
• v.24 no.4
• /
• pp.347-361
• /
• 1991

The Sangeun ore deposit is located in a volcanic belt within the Gyeongsang Basin in south western Korea. The ore deposit is of representative epithermal Au-Ag quartz vein type developed in lapilli tuff. This paper presents the mineralization with special emphasis on mineral zoning of the deposits. Principal points are summarized as follows: (1) Four stages of mineralization are recognized based on macrostructures. From ealier to later they are stage I(arsenopyrite-pyrite-quartz), stage II(Au-Ag bearing Pb-Zn-quartz), stage III(barren quartz), and stage IV(dickite-quartz). (2) Electrum principally occurs with arsenopyrite and galena in stage II, and has chemical compositions of 72.9-67.1 Ag atom %, and has Ag/Au ratio of 2.69-2.04. (3) Sphalerite varies in its FeS content according to the mineralization stages; 22.03-18.60 mole % FeS and 1.33-0.23 mole % MnS in stage IB, 16.11-8.64 mole % FeS and 1.33-0.23 mole % MnS in stage II. (4) Alteration zones of mineral assemblage, from the vein to the wall-rock, consist of sericite - quartz - pyrite, sericite - quartz - dickite, sericite - chlorite plagioclase respectively.

• Geosystem Engineering
• /
• v.21 no.5
• /
• pp.262-272
• /
• 2018

The U-statistic method is one of the most important structural methods to separate the anomaly from background. It considers the location of samples and carries out the statistical analysis of the data without judging from a geochemical point of view and tries to separate subpopulations and determine anomalous areas. In the present study, 3D U-statistic method has been applied for the first time through the three-dimensional (3D) modeling of an ore deposit. In order to achieve this purpose, 3D U-statistic is applied on the data (Fe grade) resulted from the drilling network in Baghak mine, central part of the Sangan iron mines (in Khorassan Razavi Province, Iran). Afterward, results from applying 3D U-statistic method are used for 3D modeling of the iron mineralization. Results show that the anomalous values are well separated from background so that the determined samples as anomalous are not dispersed and according to their positioning, denser areas of anomalous samples could be considered as anomaly areas. And also, final results (3D model of iron mineralization) show that output model using this method is compatible with designed model for mining operation. Moreover, seen that U-statistic method in addition for separating anomaly from background, could be very efficient for the 3D modeling of different ore type.

• Economic and Environmental Geology
• /
• v.20 no.4
• /
• pp.223-234
• /
• 1987

This paper describes the mode of occurrence and mineralogical properties of electrum from the Namseong Gold-Silver deposits, for the purpose of obtaining data on the characteristics of the ore deposits and the behavior of gold and silver during the mineralization. The gangue minerals are quartz, calcite, fluorite. Ore minerals are mainly composed of pyrite, sphalerite, chalcopyrite and galena with minor amount of argentite, electrum, pyrargyrite, native silver and unidenfied mineral(Cu-Fe-Ag-S series). Three stage of mineralization recognized are, from early to later, (I) pyrite-electrum stage (II) sphalerite-chalcopyrite-galena-argentite-electrum stage (III) sulfosalts stage. The filling temperature of fluid inclusions in quartz ranges from $225^{\circ}$ to $335^{\circ}C$. The value of sulfur fugacity estimated by means of electrum-tarnish method ranges from $10^{-11.5}$ to $10^{-14}$ atm. The compositional heterogeneity within a single grain with respect to gold concentration is common in the Namseong electrums Chemical composition of electrum ranges generally between 25~45 atom% Au. Its gold content decreases in late stages of mineralization.

• Economic and Environmental Geology
• /
• v.34 no.4
• /
• pp.319-328
• /
• 2001

The Fe-REE deposit of the Hongcheon-Jaeun district occurs in Precambrian gneiss, and is classified into two ore bodies: the Jaeun ore body (northern ore body) and the Hongcheon ore body (southern ore body). Ecomonically important minerals consist of magnetite, monazite, strontianite and barite. Based on mineral assemblages and textures, the mineralization can be classified into two stages (Na-carbonatite stage and Fe-carbonatite stage). Main REE minerals were precipitated during the Fe-carbonatite stage. Some evidences of the carbonatite origin include: 1) strontianite-monazite exolution texture, 2) strontianite-barite exolution texture, 3) the occurrence of acmite of igneous origin at the area with abundant rare earth minerals, 4) the occurrence of the mineral assemblage consisting of carbonate minerals + magnetite + REE minerals. Therefore, we suggest that Fe-REE mineralization in the study area was related to carbonatite of igneous origin.

• Economic and Environmental Geology
• /
• v.19 no.spc
• /
• pp.103-112
• /
• 1986

The geology of the mine consists of Cretaceous lower andesitic breccia member, tuffaceous black shale, upper tuffaceous sandstone member and andesitic dike. Ore bodies are two parallel veins of breccia originated from hydrothermal activity of later acidic igneous intrusion. First two periods of mineralization, gold and silver, and copper, and later copper enrichment was identified. The first two might have been occurred during boiling of hydrothermal solution that formed breccia and copper enrichment was accomplished by enhancement of $CO_2$ fugacity from the organic material contained in the black shale. With all the geologic and mineralogic data and inferences attained from other investigators it was estimated that the optimum depth of the ore mineralization was between 500m and 300m below the surface of Kyong-Sang series.

• Economic and Environmental Geology
• /
• v.48 no.1
• /
• pp.15-24
• /
• 2015

Extensive base-metal and/or gold bearing ore mineralizations occur in the Pacitan mineralized district of the south western portions in the East Java, Indonesia. Metallic ore bodies in the Pacitan mineralized district are classified into two major types: 1) skarn type replacement ore bodies, 2) fissure filling hydrothermal ore bodies. Skarn type replacement ore bodies are developed typically along bedding planes of limestone as wall rock around the quartz porphyry and are composed mineralogically of skarn minerals, magnetite, and base metal sulfides. Hydrothermal ore bodies differ mineralogically in relation to distance from the quartz porphyry as source igneous rock. Hydrothermal ore bodies in the district are porphyry style Cu-Zn-bearing stockworks as proximal ore mineralization and Pb-Zn(-Au)-bearing fissure filling hydrothermal veins as distal ore mineralization. Sulfur isotope compositions in the sulfides from skarn and hydrothermal ore bodies range from 6.7 to 8.2‰ and from 0.1 to 7.9‰, respectively. The calculated ${\delta}^{34}S$ values of $H_2S$ in skarn-forming and hydrothermal fluids are 0.9 to 7.1‰ (5.6-7.1‰ for skarn-hosted sulfides and 0.9-6.8‰ for sulfides from hydrothermal deposits). The change from skarn to hydrothermal mineralization would have resulted in increased $SO_4/H_2S$ ratios and corresponding decreases in ${\delta}^{34}S$ values of $H_2S$. The calculated ${\delta}^{18}O$ water values are: skarn magnetite, 9.6 and 9.7‰; skarn quartz, 6.3-9.6‰; skarn calcite, 4.7 and 5.8‰; stockwork quartz, 3.0-7.7‰; stockwork calcite, 1.2 and 2.0‰; vein quartz, -3.9 - 6.7‰. The calculated ${\delta}^{18}O_{water}$ values decrease progressively with variety of deposit types (from skarn through stockwork to vein), increasing paragenetic time and decreasing temperature. This indicates the progressively increasing involvement of isotopically less-evolved meteoric waters in the Pacitan hydrothermal system. The ranges of ${\delta}D_{water}$ values are from -65 to -88‰: skarn, -67 to -84‰; stockwork, -65 and -76‰; vein, -66 to -88‰. The isotopic compositions of fluids in the Pacitan hydrothermal system show a progressive shift from magmatic hydrothermal dominance in the skarn and early hydrothermal ore mineralization periods toward meteoric hydrothermal dominance in the late ore mineralization periods.

• Economic and Environmental Geology
• /
• v.27 no.3
• /
• pp.219-229
• /
• 1994

The Sangra Pb-Zn deposit is located in the Gampo area. Most Cretaceous sedimentary rocks and Paleogene felsic intrusives in the study area have experienced intense propylitization. Such propylitization and Pb-Zn mineralization in ore veins are involved with the fluid having very low oxygen isotopic composition.Sulfurisotopic equilibrium temperature during the main Pb-Zn mineralization (late stage I) is calculated as $T=275^{\circ}{\sim}295^{\circ}C$. Oxygen and sulfur fugacity in late stage I fluid is estimated as $logfO_2=-34.4{\sim}-29.1$ and $logfS_2=-12.0{\sim}-8.2$ bars. It is inferred that the sulfur isotopic composition oflate stage I fluid was very high such as ${\delta}^{34}S_{{\Sigma}S}=+22.4{\sim}+22.5$‰ and the origin of sulfur was ocean water sulfate. Oxygen and hydrogen isotopic composition of water in ore-forming fluid was gradually increased and more abundantly affected by ocean water from early to late mineralization stage as follows; (late stage I) ${\delta}^{18}O_{H2O}=-7.2{\sim}-1.1$‰, ${\delta}D_{H2O}=-87{\sim}-84$‰, (stage II) ${\delta}^{18}O_{H2O}=-2.4{\sim}-0.8$‰, ${\delta}D_{H2O}=-39{\sim}-21$‰ (stage III) ${\delta}^{18}O_{H2O}=+0.7{\sim}+12.6$‰, ${\delta}D_{H_2O}=-49{\sim}-42$‰. The pH in ore-forming fluid was about 4.7 during late stage I and is thought to have been gradually decreased from late stage I to stage II mineralization.