• 한국실내디자인학회논문집
• /
• 제21권2호
• /
• pp.133-140
• /
• 2012

Our government finally understood the true meaning of this wisdom and is attempting to revive the rural area by establishing local produce exhibition hall. This is to allow different regions to promote their specialties and provide diverse experience to the public. However, the reality is that unstructured marketing and PR is not achieving much. Marketing in the past was a paradigm of function and benefit. As we passed 20th century, this was challenged, leading to experiential marketing. Customers' cultural urge and interest in experience and participation are getting stronger. With the facilitation of Promotion Center for local special products, local special products and relevant local communities will be promoted, and the distribution business will grow further. This research was performed to establish basic research materials for planning information center in order to invigorate regional products. This study brought about the following results: first, the Promotion Center for local special products can acquire emotional elements by associating the elements with local special products; secondly, the Promotion Center for local special products can acquire cognitive elements by harmonizing local communities' unique identities with their own other special products; thirdly, the Promotion Center for local special products can acquire behavioral elements by enjoying various experiences and events; fourthly, the Promotion Center for local special products can acquire relational elements by integrating other new spaces.

• Advances in concrete construction
• /
• 제5권2호
• /
• pp.145-154
• /
• 2017

In the present day scenario, concrete construction is rapidly becoming uneconomical and non sustainable practice, due to the scarcity of raw materials and environmental pollution caused by the manufacturing of cement. In this study an attempt has been made to propose recycled aggregates from demolition wastes as coarse aggregate in geopolymer concrete (GPC). Experimental investigations have been conducted to find optimum percentage of recycled aggregates (RA) in GPC by replacing 20%, 30%, 40%, 50% and 60% of coarse aggregates by RA to produce recycled aggregate geopolymer concrete (RGPC). From the study it has been found that the optimum replacement percentage of recycled aggregates was 40% based on mechanical properties and workability. In order to study and compare the flexural behaviour of RGPC and GPC four beams of size $175mm{\times}150mm{\times}1200mm$ were prepared and tested under two point loading. Test results were evaluated with respect to first crack load, ultimate load, load-deflection characteristics, ductility and energy absorption characteristics. Form the experimental study it can be concluded that the addition of recycled aggregate in GPC causes slight reduction in its strength and ductility. Since the percentage reduction in strength and behaviour of RGPC is meager compared to GPC it can be recommended as a sustainable and environment friendly construction material.

• 한국실내디자인학회논문집
• /
• 제18권6호
• /
• pp.69-76
• /
• 2009

As sensibility ergonomics are broadly spread, recently in interior design area, interests on roles of sensibility, sensibility effects for users, and etc has been increased. As a study on sensibility design for interior design area, the study applied sensibility ergonomics technique to bathroom interior design. Sensibility ergonomics technique is integrated into each phase of bathroom design process in order to produce 4 design alternatives. Sensibility evaluation on design alternatives was performed for subject of designers, and analyzed the results to show the relationship between sensibility of designers and design factors and to identify characteristics of designer's sensibility structure. The results of the study are as follows. First, it's found that in the bathroom interior design of sustainable concept, uses of bright colors with white tone and floor tile creates positive sensibility responses such as delight, healthiness, spaciousness, and cheerfulness. Second, designers' sensibility structure about sustainable bathroom is composed of three axles, healthiness, eco-friendliness, and refinement. Third, designers think colors of interior and finished materials is most important, and window, artificial lighting, layout, and space size related to those is important too. The process and approach in the study might contribute to building a fundamental of sensibility design research in interior design area.

• Advances in aircraft and spacecraft science
• /
• 제10권2호
• /
• pp.179-202
• /
• 2023

This article presents a numerical analysis to investigate the natural frequencies and harmonic response of a perforated cantilever beam attached to two layers of piezoelectric materials by using the finite element method for the first time. The bimorph piezoelectric is composed of 3 layers; two of them at the outer are piezoelectric, and the inner isotropic material. A higher order 3-D 20-node solid element that exhibits quadratic displacement behavior is exploited to discretize the isotropic layer, and coupled piezoelectric 3D element with twenty nodes is used to mesh the top and bottom layers. CIRCU94 element is added to act as a resistor part of the model. The proposed model is validated with previous works. The numerical parametric studies are presented to illustrate the effects of perforation geometry, the number of rows, the resistance on the natural frequencies, frequency response, and power. It is found that the thickness has a positive relationship with the natural frequency. Perforations help in producing higher voltage, and the best shape is rectangular perforations, and to produce higher voltage, two rows of rectangular perforations should be applied.

• 디자인학연구
• /
• 제19권4호
• /
• pp.133-144
• /
• 2006

최근 소비자보호원의 발표에 의하면, 신 개축 건물의 많은 입주자들이 통증을 호소하고 있으며, 예방을 위해 건축자재의 선별에 있어 각별한 주의가 요구된다고 한다. 국제적 동향 역시, 친환경성에 기초한 자재의 지속가능성을 사용자의 건강, 환경보전, 산업경쟁력의 제고 요인으로 인식하고 있다. 본 연구는 소비자가 친환경 건축자재에 대해 바르게 이해하고, 적극 활용할 수 있도록 정보를 제공하는데 목적이 있으며 이를 위해 웹 사이트 검색, 업체 카탈로그, 면담 등을 종합하여 목질계 바닥재, 합성수지바닥재, 타일, 벽지, 카펫 등에 대해 원자재, 생산, 사용 및 설치, 사용 후 등 각 단계별로 제품의 친환경적 측면을 조사 분석하였다. 조사결과, 1. 국내 자재 업체에서는 마케팅 전략의 일환으로 유해물질 저방출과 생산 과정에서 주성분 이외에 기능성(원적외선, 음이온, 황토, 숯, 옥 등) 성분을 첨가하여 친환경 개념을 강조한 제품개발과 신제품 출시에 박차를 가하고 있다. 그러나 제품의 전 라이프사이클을 통한 친환경적 측면이 재인식되어야하며 이에 부합하는 친환경제품이 개발되어야한다. 2. 국내제품 선택 시 가장 신뢰할 수 있는 기준은 EL, HB, GR 마크 획득인데, GR마크를 획득한 재활용 제품은 찾아보기 힘든 실정이므로 폐기물을 이용한 재활용 내장재 활성화를 위해 재활용 기술수준 향상과 지속가능한 소비를 위한 노력이 요구된다. 3. 친환경 관점에서 현재 국내 실내건축 자재를 평가할 때 가장 취약한 부분은 원자재였으며, 이를 극복하기위해서는 사용 후 폐기 시 분리수거가 가능하도록 제품을 디자인하는 방법, 폐자원을 재활용하여 훌륭한 제품을 개발하는 방법, 제품 소각 시 이를 에너지화하는 방법 등이 더욱 연구되어야할 것이다. 4. 지속가능한 개념의 생산과 소비가 촉진되기 위해서는 친환경 건축자재에 대한 바른 정보가 필요하며 이를 쉽게 정리한 가이드북이나 매뉴얼이 시급히 요구된다. 5. 국내 제품에 대한 표본조사 결과, 많은 업체들이 자사 제품에 대한 친환경성을 강조하고 있으나 친환경성이 입증되지 않은 제품에 대해서도 친환경 소재임을 내세워 소비자의 판단을 흐리는 경우가 많으므로 이에 대한 시정이 필요하다.

• 한국환경보건학회지
• /
• 제37권6호
• /
• pp.467-473
• /
• 2011

Objectives: Wastewater treatment plants typically produce a large volume of waste sludge. In this study, the conditioning and dewatering properties of a digested and thickened sludge from an industrial wastewater treatment plant were investigated in order to improve the dewaterbility of the sludge. Methods: Jar-tests and Buchner funnel tests were carried out to assess the conditioning and dewatering properties of a waste sludge. TTF (Time to Filter Test) and SRF (Specific Resistance to Filtration) were adopted as the indices of sludge dewaterbility. Results: The valuation indices influencing the dewaterbility of the waste sludge, including TTF, SRF, water contents, VS/TS ratio and turbidity, were measured. The TTF and SRF of the digested and thickened sludge were decreased to 40 sec, $3.43{\times}10^{12}$ m/kg, and 39 sec, $1.09{\times}10^{12}$ m/kg, respectively. Conclusions: The conditioner composed of natural inorganic materials turned out to be effective in the reduction of sludge water contents.

• 대한기계학회논문집A
• /
• 제28권6호
• /
• pp.826-837
• /
• 2004

Rotational molding is a plastics processing technique that is ideally suited to producing relatively large, hollow, seamless parts which are partially or totally enclosed. Designers of plastic parts turn to rotational molding to produce small or large parts of unusual shape that cannot be produced as one piece by other processes, e.g., blow molding and thermoforming. In this paper, in order to enhance the quality of rotational molding plastic products, 1) surface features for the plastic products are characterized by using an image analysis system, 2) maximum tensile strength for the plastic products that are made of materials that consist of Samsung-Atofina R90lU, pigments and two different kinds of calcium carbonate (OMYA CaCO$_3$) is measured and compared with each other by using an Instron universal testing machine, 3) thickness for the plastic products is non-destructively measured to investigate the quality of the plastic products by using an A-scan ultrasonic tester.

• 소성∙가공
• /
• 제26권1호
• /
• pp.28-34
• /
• 2017

Multi-pass shape rolling is performed to produce long products of arbitrary cross-sectional shapes. In the past, the multi-pass shape rolling process has been designed by the trial and error method or the experience of experts based on the empirical approach. Particularly, the design of roll caliber in shape rolling is important to improve product quality and dimensional accuracy. In this paper, the caliber design and pass schedule of multi-pass shape rolling were proposed for manufacturing piston ring wire. In order to design roll caliber, major shape parameter and dimension was determined by analysis of various caliber design. FE-simulation was conducted to verify effectiveness of proposed process design. At first, forming simulation was performed to predict shape of the product. Then, fracture of the wire was evaluated by critical damage value using normalized Cockcroft-Latham criteria. The experiment was carried out and the results are within the allowable tolerance.

• 한국건축시공학회지
• /
• 제8권5호
• /
• pp.43-51
• /
• 2008

This study examines shear capacity performance and structural characteristics of reinforced concrete beam using carbon fiber sheet(CFS), g)ass fiber sheet(GFS), glass fiber steel plate(GSP) and carbon fiber bar CB) which are reinforcing materials for reinforced concrete beam in order to produce similar condition to repair and reinforce actual structure and aims to provide data available In designing and constructing reinforced concrete structures under the structural damage. This study obtains the following conclusions. After considering the shear experiment results. it was indicated that the CB reinforced test object was the best in the shear capacity improvement and ductility capacity as it was contained in the concrete and was all operated, Also, GFS reinforced test object indicated the reduced flexural capacity but good shear capacity. GSP reinforced test object had bigger reinforcing strength than other reinforcing test objects. On the other hand, it showed the lowest reinforcement effect as compared section thickness of reinforced material because it showed the bigger relativity a section thickness of reinforced material. If the adherence to the concrete is improved, it will seem to show bigger reinforcement effect.

• 소성∙가공
• /
• 제23권2호
• /
• pp.95-102
• /
• 2014

The under-drive brake piston is an important component in automotive transmissions. It changes the velocity by controlling the gear ratio. It has been traditionally manufactured by hot forging. Recently, there has been an effort to replace this traditional manufacturing method with cold forging in order to improve the dimensional accuracy and decrease the surface roughness. Cold forging uses a smaller amount of initial material and also has a shorter cycle time since the forged surface can be the final surface without the need of post-processing such as machining or grinding. In the current study, finite element analysis was conducted to evaluate a process design using an initial plate with reduced thickness. This smaller thickness decreases the amount of material needed for the part as well as the machining to produce the final product.