• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.13-44
• /
• 1982

7.1 옛날부터 재목(材木)을 오래 불에 담그어 쓰면 덜트로 덜 휜다고 하였는데 말로서 전(傳)하여 왔을 뿐 그 연구결과(硏究結果)나 또는 그 원인(原因)에 대한 것은 분명(分明)치 못하였다. 한편 재목(材木)의 추출성분(抽出成分)이 그 재목(材木)의 물리적(物理的) 성질(性質)에 영향(影響)할 것이라는 추측(推測)은 많었으나 실지로 그 영향(影響)에 대한 연구(硏究)를 하여 그 결과(結果)와 그 원인(原因)을 밝힌 것도 극(極)히 적었다. 이 연구(硏究)는 이와같은 입장(立場)에 놓여있는 그 간미지(間未知)한 점(点)을 밝히기 위(爲)하여 다시말하면 재목(材木)을 물에 담그어 그 수용성(水溶性) 추출물(抽出物)을 추출(抽出)하므로써 일어나는 물리적(物理的) 성질(性質)에 대한 결과(結果)를 조사(調査)하고 이 결과(結果)를 통(通)하여 얻는 진리(眞理)를 응용(應用)하여 재목(材木)의 일대 흠점(欠点)인 수축(收縮), 팽창(膨脹) 이에따라 일어나는 트는것, 휘는것, 틀어지는 것 등(等)을 막아 재목이용(材木利用)의 합리화(合理化)를 기(期)할 목적(目的)으로써 시작(始作)된 것이며 Yale 재과대학(材科大學) 목재이용학(木材利用學) 연구실(硏究室)에서 담당교수 F.F.Wangaard 박사(博士) 지도하(指導下)에 재료(材料)는 동(同) 연구실(硏究室)에 준비(準備)되어 있는 북미(北美)산 스트로 - 부 소나무 참나무 그리고 남방열대(南方熱帶)산 하이메나에아의 삼(三) 종류(種類)에 대하여 연구(硏究)되었다. 7.2 연구(硏究)의 대상이 된 물리적(物理的) 성질(性質)은 목재(木材)의 실용적 사용(使用)에 있어서 가장 관계가 깊은 다시 말하면 트고 휘고 틀어지는등(等)의 관계가 깊은 평형함수량(平衡含水量), 수축(收縮), 팽창(膨脹) 그리고 강도(强度)의 지표(紙票)가 되는 비중(比重)등이 있다. 7.3 시험(試驗)은 위에 말한 세 가지 종류(種類)를 가지고 추출처리(抽出處理)를 하여 추출(抽出)한것과 반대로 추출성(抽出性) 물질(物質)은 침투(浸透)시킨것에 대하여 비교(比較)될 무처리(無處理)한 세 다른 공시재(供試在)를 준비(準備)하여 실시되었다. 다음 시험결과(試驗結果)는 7.4 수용성(水溶性) 추출물(抽出物)이 추출량(抽出量)과 그 추출액중(抽出液中)의 성분(成分)그룹은 Table 36에 표시(表示)된것과 같으며 나무 종류(種類)에 따라 추출량(抽出量)에 그리고 각(各) 성분(成分)그룹의 종류(種類)와 그 양(量)에 차이(差異)를 볼수 있었다. 7.5 평형함수량(平衡含水量)에 있어서는 a) 추출처리(抽出處理)를 하여 그 추출성분(抽出成分)이 빠져버린 공시재(供試材)와 그와 반대의 공시재(供試材) 사이에는 확실한 차이(差異)가 있어 추출성분(抽出成分)을 재내(材內)에 포함(包含)하고 있으므로써 같은 관계흡도에서 80%방습시(放濕時)는 이와 반대 평형함수량(平衡含水量)은 많아졌다. b) 설탕액(雪糖液)에 담그어 침투처리(浸透處理)를 하여 당분(糖分)이 재내(材內)에 침입(侵入)된 공시재(供試材)는 대체(大體) 추출처리(抽出處理)를 하지 않은 공시재(供試材)와 거의 같은 경향(傾向)의 결과(結果)를 나타내고 있다. c) 나무의 종류(種類)에 따른 차이(差異)는 일정한 경향(傾向)을 볼 수 없으나 스트로-부 소나무의 심재부(心材部)와 변재부를 비교(比較)하면 심재부(心材部)는 그 평형함수량(平衡含水量)이 적다. 이것은 원래(元來)의 함수량(含水量)에 있어서 심재부(心材部)가 적은데 이와같은 차이(差異)는 식물생리학적(植物生理學的) 또는 그 해부학적(解剖學的) 구조(構造)의 차이(差異)에서 생기는 것이다. 7.6 수축(收縮)에 있어서는 a) 추출처리(抽出處理)를 한 공시재(供試材)의 수축량(收縮量)은 그와 반대로 추출처리(抽出處理)를 않어 추출성분(抽出成分)이 그대로 남어있는 공시재(供試材)에 비교(比較)하여 그 수축량(收縮量)이 모두 크다. b) 설탕액(雪糖液)에 담그어 침투처리(浸透處理)를 한 공시재(供試材)는 그 수축량(收縮量)은 다른것에 비교(比較)하여 제일 적고 모두 침투처리(浸透處理)를 하지않은 공시재(供試材)와 거의 같은 결과(結果)를 보이고 있는데 이것은 재목(材木)을 사용전(使用前)에 특수(特殊)한 침투처리(浸透處理)를 하여 쓰면 재목(材木)의 일대 흠점(欠点)인 수축(收縮)을 막을수 있다는 것을 실증하는 것이다. c) 나무의 종류별(種類別)로보면 스트로-부 소나무의 심재부(心材部)는 그 변재부보다 수축량(收縮量)이 적으며 참나무의 수축량(收縮量)은 제일 크로 스토로-부 소나무에 비교(比較)하여 약(約)2배(倍) Hymenaea는 참나무 보다 적고 스트로 - 부 소나무 보다는 컸다. d) 각(各) 수종(樹種)을 통(通)하여 방향성(方向性)에 따른 수축량(收縮量)을 보면 촉단면방향(觸斷面方向)의 수축량(收縮量)은 경단방향(徑斷方向)의 수축량(收縮量)보다 큰 것은 다른 모든 나무에서 보느 결과(結果)와 같다. e) 추출량(抽出量)과의 관계를 보면 추출량(抽出量)이 많은 것일수록 추출처리(抽出處理)를 않은 것과의 수축량(收縮量)의 차이(差異)는 컸다. 7.7 팽창(膨脹)에 있어서는 a) 추출처리(抽出處理)로 그 성분(成分)을 추출(抽出)하여 낸 공시재(供試材)의 팽창량(膨脹量)은 그와 반대의 것에 비교(比較)하여 모두 팽창량(膨脹量)이 컸다. b) 재목(材木)의 방향성(方向性)에 따라보면 모두 촉단(觸斷) 방향(方向)의 팽창량(膨脹量)은 경단방향(徑斷方向)의 팽창량(膨脹量)에 비(比)하여 크다. c) 수축(收縮)에서 본것과 같이 팽창(膨脹)에 있어서도 나무의 종류(種類)에 따라 그 팽창량(膨脹量)에 차이(差異)를 볼수 있으며 그 팽창량(膨脹量)은 참나무 하이메나에아 스트로-부 소나무의 변재 그리고 동심재(同心材)의 순서(順序)도 적어졌으며, 수축량(收縮量)이 큰 것은 팽창량(膨脹量)에 있어서도 크다는 것을 실증하였다. 7.8 비중(比重)에 있어서는 a) 추출처리(抽出處理)를 한 공시재(供試材)의 비중(比重)이 추출처리(抽出處理)를 않은 공시재(供試材)의 비중(比重)에 비교(比較)하여 컸다. 이것은 비중(比重)을 결정(決定)할 때 사용(使用)된 용적(容積)에 기인(起因)하였으며 사실은 이와 반대의 결과(結果)가 나타나야 할 것이다. b) 나무의 종류별(種類別)로 보면 스트로-부 소나무의 심재(心材)는 변재보다는 그 비중(比重)이 크며 두 참나무의 비중(比重)은 소나무의 그것보다 배(倍)나 크고 하이메나에아는 그 비중(比重)이 제일 컷다. (9) 이상(以上) ; 모-든 시험결과(試驗結果)를 종합(綜合)하여 생각할 때 막연(漠然)히 재목(材木)을 물에 오래 담그어 쓴다는 생각은 오히려 잘못하면 목재(木材)의 성질(性質)을 더욱 악화(惡化)시킬 우려(憂慮)가 있으며 물에 담그어 쓰되 설탕질등(雪糖質等)으로 재목내부(材木內部)에 침투(浸透)할 수 있는 성질(性質)의 성분(成分)이 용해(溶解)되어 있는 액중(液中)에 담그어 쓰는 것은 재목(材木)의 일대 흠점(欠点)인 수축(收縮)과 팽창(膨脹) 그리고 이에 따라 일어나는 트고 휘는 일이며 틀어지는 등(等)의 흠점(欠点)을 막을 수 있다는 것을 실증하게 되었다. 만고(萬苦) 물속에 오래 담그어 쓰는 것이 다시 말하면 수용성(水溶性) 추출물(抽出物)을 빼내어 쓰는 것이 그 결과(結果)에 있어 확실히 양호(良好)하였다는 사실이 있었다면 그것은 수용성성분(水溶性成分)을 제출(提出)함으로써 균일(均一)한 수축(收縮)과 팽창(膨脹)이 일어나는데 기인(起因)하였을 것이다.

• Journal of Preventive Medicine and Public Health
• /
• 제7권1호
• /
• pp.1-28
• /
• 1974

The writers have conducted the investigation to assess the nutritional status of young rural Korean children aged from 0 to 4 years old in August 1971. The survey areas were Kaejong-myon. Daeya-myon, Okku-gun, Jeonra-bukdo, Korea. These survey areas were typical agricultural plain areas. The total numbers of children examined were 2,706 comprising 1,394 male and 1,312 female. The weight, height, and chest circumference of children were measured and means and standard deviations. were calculated for each measurement. In addition, the nutritional status of each child was classified by the four levels of malnutrition and the Gomez classification, The examination of red blood cell count, haematocrit value, and intestinal parasite infection were carried out at the same time. In general, recent work tend to suggest that environmental influences, especially nutrition, are of great importance than genetic background or other biological factors for physical growth and development. Certainly the physical dimensions of the body are much influenced by nutrition, particularly in the rapidly growing period of early childhood. Selected body measurements can therefore give valuable information concerning protein-calory malnutrition. Growth can also be affected by bacterial, viral, and parasitic infection. For the field workers in a developing country, therefore, nutritional anthropometry appears to be of greatest value in the assessment of growth failure and undernutrition, principally from lack of protein and calories. In order to compare and evaluate the data obtained, the optimal data of growth from the off-spring of the true well-fed, medically and socially protected are needed. So-called 'Standards' that have been compiled for preschool children in Korea, however, are based on measurement of children from middle or lower socio-economic groups, who are, in fact, usually undernourished from six months of age onwards and continuously exposed to a succession of infective and parasitic diseases. So that, the Harvard Standards which is one of the international reference standards was used as the reference standards in this study. Findings of the survey were as follows: A. Anthropometric data: 1) Comparing the mean values for body weight obtained with the Korean standard weight of the same age, the rural Korean children were slightly haevier than the Korean standard values in both sexes. Comparing with the Japanese children values, the rural Korean children were slightly haevier in male and in the infant period of female but lighter in female of the period of 1 to 4 years old than Japanese children. 2) Comparing the mean values for height obtained with the Korean standard height of the same age, the rural Korean children were taller than the Korean standard values except the second half of infatn period in both sexes. Comparing with the Japanese children, the rural Korean children were slightly smaller than Japanese children except the first half of infant peroid in both sexes. 3) Mear values of chest circumference of rural Korean children obtained were less than the Korean standard values of the same ages in both sexes. B. Prevalence of Protein-Calory Malnutrition: Children examined were devided into two groups, i. e., infant(up to the first birthday) and toddler (1 to 4 fears old). 1) Percentages of four levels of malnutrition: a) When the nutrtional status of each child was classified (1) by body weight value, the percentages for male and female of children attained standard growth were 52.8%(infant 83.3%, toddler 44.4%) and 39.7% (infant 74.5%. toddler 30.5%), the first level of malnutrition were 31.9%(infant 13.7%, toddler 36.9%) and 31.7%(infant 15.3%, toddler 36,0%), the second level of malnutrition were 12.3%(infant 1.7%, toddler 15.3%) and 23.3% (infant 7.7%, fodder 27.5%), the third level of malnutrition were 2.7%(infant 0.7%, toddler 3.2%) and 4.6%(infant 1.8%, toddler 5.3%) the fourth level of malnutrition were 0.3% (infant 0.7%, toddler 0.2%) and 0.7% (0.7% for infant and toddler) respectively. (2) by height value, the percentages for male and female of children attained standard growth were 80.3% (infant 97.3%, toddler 75.6%) and 75.1% (infant 96.4%, toddler 69.5), the first level of malnutrition were 17.9% (infant 2.0%, toddler 22.3%) and 23.6% (infants 3.6%, toddler 28.8%), the second level of malnutrition were 1.2% (infant 0.3%, toddler 1.5%) and 1.1% (infant 0%, toddler 1.4%), the third level of malnutrition were 0.4%(infant 0.3%, toddler 0.5%) and 0.2%(infant 0%, toddler 0.3%), the fourth level of malnutrition were 0.1%(infant 0%, toddler 0.1%) and 0% respectively. (3) by body weight in relation to height, the percentages for male and female of children attained standard growth were 87.9% (infant 77.6%, toddler 87.9%) and 78.2% (infant 77.4%, toddler 78.2%), the first level of malnutrition were 12.2% (infant 18.4%, toddler 10.6%) and 18.2% (infant 17.9%, toddler 18.3%), the second level of malnutrition were 1.9%(infant 3.3%, toddler 1.5%) and 3.0%(infant 3.3%, toddler 2.9%), the third level of malnutrition were 0.1%(infant 0%. toddler 0.1%) and 0.5% (infant 0%, toddler 0.6%), the fourth level of malnutrition were 0.1%(infant 0.7%, toddler 0%) and 0.3% (infant 1.5%, toddler 0%) respectively. b) When the nutritional status of each child according to the mother's age at perturition, i. e., young aged mother (up to 30 years old), middle aged mother (31 to 40 years old) and old aged mother (41 years or above) was classified (1) by body weight, among infants and toddlers, at each year of age, with increasing the mother's age, there was an increase in percentage of subjects underweight. This tendency of increasing percentage of underweight was more significant in the infant period than the toddler period. (2) by height value, no significant differences between each mother's age group were found. c) When the nutritional status of each child according to the birth rank, i. e., lower birth rank (first to third) and higher birth rank (fourth or above) was classified (1) by weight value, children of higher birth rank were slightly more often underweight than those of lower birth rank, but not significant. (2) by height value, no differences were found between children of lower and higher birth rank. 2) Gomez Classification: When the nutritional status of each child was classified a) by body weight value, the percentages for male and female of children. attained standard growth were 53.1% (infant 82.6%, toddler 44.9%) and 39.2% (infant 73.4%, toddler 30.1%), the first degree of malnutrition were 39.4% (infant 14.7%, toddler 46.2%) and 47.1% (infant 21.9%, toddler 53.8%), the second degree of malnutrition were 7.3%(infant 2.3%, toddler 8.6%) and 12.9% (infant 4.0%, toddler 15.2%). and the third degree of malnutrition were 0.2%. (infant 0.3%, toddler 0.2%) and 0.8% (infant 0.7%, toddler 0.9%) respectively. b) by height value, the percentages for male and female of children attained standard growth were 80.8% (infant 97.0%, toddler 76.3%) and 73.8%(infant 95.6%, toddler 68.0%), the first degree of malnutrition were 18.5% (infant 2.7%, toddler 22.9%) and 24.6% (infant 4.4%, toddler 30.0%), the second degree of malnutrition were 0.6%(infant 0.3%, toddler 0.7%) and 0.5% (infant 0.1%, toddler 0.7%), and the third degree of malnutrition were 0.1%(infant 0%, toddler 0.1%) and 1.1% (infant 0%, toddler 1.3%) respectively. C. Results of clinical laboratory examination: 1) Red blood cells: The ranges of mean red blood cell counts for male and female were $3,538,000/mm^3\;to\;4,403,000/mm^3\;and\;3,576,000/mm^3\;to\;4,483,000/mm^3$ respectively. The lowest red cell counts were seen at the age of 0-3 months for male and 1-2 months for female. 2) Haematocrit value : The ranges of haematocrit value of male and female were 35.1% to 38.8% and 34.7% to 38.8% respectively. The lowest haematocrit values were seen at the age of 2-3 months for male and 1-2, months for female. 3) The prevalence rates of intestinal parasites for male and female children with Ascaris lumbricoides were 34.1% (infant 18.8%, toddler 38.1%) and 36.0%(infant 18.4%, toddler 40.7%), with Trichocephalus trichiuris were 6.8% (infant 2.9%, toddler 7.9%) and 9.0% (infant 3.0%, toddler 10.6%), with Hookworm were 0.3% (infant 0.5%, toddler 0.2%) and 0.3% (infant 0.5%, toddler 0.3%), with Clonorchis sinensis were 0.4%(infant 0%, toddler 0.5%) and 0.1%(infant 0%, toddler 0.1%) respectively.

• 지능정보연구
• /
• 제23권4호
• /
• pp.77-110
• /
• 2017

최근 인터넷 기반의 웹 및 모바일 기기를 통한 소비 패턴의 다양화와 개성화가 급진전됨에 따라 전통적 유통채널인 오프라인 매장의 효율적 운영이 더욱 중요해졌다. 매장의 매출과 수익 모두를 제고하기 위해 매장은 소비자에게 가장 매력적인 상품을 적시에 공급-판매 해야 하는데 많은 상품들 중에서 어떤 SKU를 취급하는 것이 판매 확률을 높이고 재고 비용을 낮출 수 있는지에 대한 연구가 부족한 실정이다. 특히, 여러 지역에 걸쳐 다수의 오프라인 매장을 통해 상품을 판매하는 기업의 경우 고객에게 매력적인 적절한 SKU를 추천 받아 취급할 수 있다면 매장의 매출 및 수익률 제고에 도움이 될 것이다. 본 연구에서는 개인화 추천에 이용되어 왔던 협업 필터링과 하이브리드 필터링 등의 추천 시스템(Recommender System)을 국가별, 지역별로 복수의 판매 매장을 통해 동종 브랜드를 취급하는 유통 기업의 매장 단위 취급 SKU 추천 방식을 제안하였다. 각 매장의 취급 품목별 구매 데이터를 활용하여 각 매장 별 유사성(Similarity)을 계산하고 각 매장의 SKU별 판매 이력에 따라 협업 필터링을 하여 최종적으로 매장에 개별 SKU를 추천하였다. 또한 매장 프로파일 데이터를 활용하여 주변수 분석 (PCA : Principal Component Analysis) 및 군집 분석(Clustering)을 통하여 매장을 4개의 군집으로 분류한 뒤 각 군집 내에서 협업 필터링을 적용한 하이브리드 필터링 방식으로 추천 시스템을 구현하고 실제 판매 데이터를 바탕으로 두 방식의 성능을 측정하였다. 현존하는 대부분의 추천 시스템은 사용자에게 영화, 음악 등의 아이템을 추천하는 방식으로 연구가 진행되어 왔고 실제로 산업계에서의 적용 또한 개인화 추천 시스템이 주류를 이루고 있다. 그 동안 개인화 서비스 영역에서 주로 다루어져 왔던 이러한 추천 시스템을 동종 브랜드를 취급하는 유통 기업의 매장 단위에 적용하여 각 매장의 취급 SKU를 추천하는 방식에 대한 연구는 거의 이루어지지 않고 있는 실정이다. 기존 추천 방법론의 추천 적용 대상이 '개인의 영역이었다면 본 연구에서는 국가별, 지역별로 복수의 판매 매장을 통해 개인의 영역을 넘어 매장의 영역으로 확대하여 동종 브랜드를 취급하는 유통 기업의 매장 단위 취급 SKU 추천 방식을 제안하고 있다. 또한 기존의 추천시스템은 온라인에 한정되었다면 이를 오프라인으로 활용 범위를 넓히고, 기존 개인을 기반으로 분석을 하는 것보다 매장영역으로 확대 적용하기에 적합한 알고리즘을 개발하기 위해 데이터마이닝 기법을 적용하여 추천 방법을 제안한다. 본 연구의 결과가 갖는 의의는 개인화 추천 알고리즘을 동일 브랜드를 취급하는 복수의 판매 매장에 적용하여 의미 있는 결과를 도출하고 실제 기업을 대상으로 시스템으로 구축하여 활용할 수 있는 구체적 방법론을 제시했다는 데에 있다. 개인화 영역을 위주로 이루어졌던 기존의 추천 시스템과 관련한 학계의 연구 영역을 동종 브랜드를 취급하는 기업의 판매 매장으로 확장시킨 첫 시도라는 데에도 의미가 있다. 2014년 03주차 ~ 05주차 전(全) 매장 판매 수량 실적 Top 100개 SKU로 추천의 대상을 한정하여 협업 필터링과 하이브리드 필터링 방식으로 52개 매장 별로 취급 SKU를 추천하고, 추천 받은 SKU에 대한 2014년 06주차 매장별 판매 실적을 집계하여 두 추천 방식의 성과를 비교하였다. 두 추천 방식을 비교한 이유는 본 연구의 추천 방법이 기존 추천 방식 보다 높은 성과를 입증하기 위해 단순히 오프라인에 협업필터링을 적용한 것을 기준 모델로 정의하였다. 이 기준 모델에 오프라인 매장 관점의 특성을 잘 반영한 본 연구 모델인 하이브리드 필터링 방법과 비교 함으로써 성과를 입증한다. 연구에서 제안한 방식은 기존 추천 방식보다 높은 성과를 나타냈으며, 이는 국내 대기업 의류업체의 실제 판매데이터를 활용하여 입증하였다. 본 연구는 개인 수준의 추천시스템을 그룹수준으로 확장하여 효율적으로 접근하는 방법을 이론적인 프레임 워크를 만들었을 뿐 아니라 실제 데이터를 기반으로 분석하여 봄으로써 실제 기업들이 적용해 볼 수 있다는 점에서 연구의 가치가 크다.

• Nuclear Medicine and Molecular Imaging
• /
• 제41권1호
• /
• pp.30-41
• /
• 2007

목적 : 유방암 환자에서 골전이는 Tc-99m MDP를 이용한 전신 골스캔이 주로 이용되며, 이 검사 기법은 높은 예민도를 나타내나 특이도가 낮다는 단점을 가진다. F-18 FDG를 이용한 PET 검사는 높은 해상도를 가지며 골스캔이 비하여 높은 분해능을 가지며 골전이 진단성능이 높다. PET에 CT 영상 기법이 도입된 F-18 FDG PET/CT는 PET 검사와 동시에 CT 영상정보를 제공함으로써, 유방암환자의 골전이 평가에 PET 보다 더 높은 검사의 정확도를 나타낼 수 있다. 본 연구는 유방암 환자에서 골 전이여부를 평가하는데, F-18 FDG PET/CT와 골스캔의 진단성능과 유용성을 비교해 보았다. 대상 및 방법 : 유방암으로 진단받은 후 병기 판정위하여 혹은 유방암 수술후 재발 평가를 위하여, Tc-99m MDP 골스캔과 F-18 FDG PET/CT를 1주일 간격이내에 시행한 여성환자 157명 ($28{\sim}78$세, 평균연령=$49.5{\pm}8.5$세)을 대상으로 하였다. 골전이 병소의 최종진단은 조직학적검사, 방사선상학적 검사, 임상적 추적관찰을 이용하였다. 골스캔은 Tc-99m MDP를 740 MBq을 투여한 4시간 후에 평면감마카메라 영상을 얻었다. 골스캔 소견은 정상소견, 저확률, 중간확률, 고확률로 구분하였다. PET/CT 검사는 6시간 이상 금식 이후에 시행하였으며, F-18 FDG 370 MBq을 정맥주사를 시행한 후 1시간동안 안정을 취한 후 3D 방식으로 영상을 획득하였다. CT 촬영은 조용한 호흡 중에 시행되었고 감쇠보정에 이용하였다. 생리적인 섭취증가를 제외하고, 주위 골의 섭취에 비해 높은 섭취를 보이는 경우 이상섭취로 판단하였다. FDG 섭취정도의 정량화는 SUVmax와 SUVrel를 이용하였다. 결과: 대상환자 가운데 6명이(4.4%) 골전이 소견을 나타내었으며, 골스캔은 4명(66.6%)의 환자에서만 진단할 수 있었고, PET/CT는 6명 (100%) 모두를 진단할 수 있었다. 골스캔과 PET/CT에서 발견된 골병소의 수 135개이었으며, 양성병소가 27개, 전이병소가 108개였다. 골전이 병소는 양성 골병소에 비하여 높은 SUVmax 및 SUVrel을 나타내었다($4.79{\pm}3.32$ vs $1.45{\pm}0.44$, p=0.000, $3.08{\pm}2.85$ vs $0.30{\pm}0.43$, p=0.000). 108개의 골전이 병소 가운데 76개(70.4%)의 병소가 골스캔 상 이상섭취 소견을 나타내었으며, 동일한 76개(70.4%)의 병소가 FDG 섭취증가 소견을 나타내었다. 골병소부위의 골스캔상 이상섭취 유무와 PET상 섭취증가 유무는 유의한 일치도를 나타내었다(Kendall tau-b : 0.689, p=0.000). 골전이 병소 가운데 골스캔상 양성소견을 보인 병소는 그렇지 않은 병소에 비하여 높은 SUVmax 와 SUVrel을 나타내었다($6.03{\pm}3.12$ vs $1.09{\pm}1.49$, p=0.000, $4.76{\pm}3.31$ vs $1.29{\pm}0.92$, p=0.000). 골전이 병소의 발생부위는 척추골이 가장 많았으며, 골반골, 늑골, 두개골, 흉골, 견갑골, 대퇴골, 쇄골, 상완골 순서였다. 두개골 전이병소에 SUVmax가 가장 높은 값을 나타내었으며, 늑골의 SUVrel가 가장 높은 값을 나타내었다. 경화성 골전이 병소가 다른 형태의 골전이 병소에 비하여 낮은 SUVmax와 SUVrel 값을 나타내었다. 결론: 유방암 환자의 골전이 평가시 골스캔에 비하여 F-18 FDG PET/CT의 진단적 예민도가 더 높게 나타났다. 경화성 골전이 병소는 FDG 이상섭취가 없는 경우가 많아 CT 소견의 면밀한 검토가 필요하다고 생각된다.

• 사상체질의학회지
• /
• 제10권2호
• /
• pp.533-564
• /
• 1998

식생활(食生活)이 향상(向上)되고 생활(生活)이 변화(變化)되며 사회(社會)가 서구화(西歐化)가 됨으로써 우리나라에서도 비만(肥滿)이 하나의 질병(疾病)으로 자리를 잡았다. 많은 사람이 비만(肥滿)을 치료(治療)하기 위하여 노력(勞力)을 하며 최근(最近)에는 비만(肥滿)으로 인하여 고혈압(高血壓), 당뇨병(糖尿病), 동맥경화(動脈硬化), 관상동맥질환(冠狀動脈疾患), 뇌졸중(腦卒中), 퇴행성(退行性), 관절염(關節炎), 중풍(痛風), 담석증(膽石症), 지방간(脂肪肝), 간경병증(肝硬變症), 신장병(腎臟病), 임신중독(姙娠中毒), 불임증(不臨症) 등(等)의 여러 증상(症狀)이 나타난다는 보고가 있다. 비만증(肥滿症)은 "체내(體內)의 지장조직량(脂肪組織量)이 過剩으로 증가(增加)된 상태(狀態)" 라고 정의(定意)하고 대체적(大體的)으로 비만(肥滿)이라 함은 표준체중(標準體重)의 20%이상(以上)을 초과(超過)한 상태(狀態)이거나 체내(體內) 지방(脂肪)이 남자(男子)에서는 체중(體重)의 25%, 여자(女子)에서는 체중(體重)의 30%이상(以上)인 경우(境遇)이다. 원인(原因)에 따라서 유전적(遺傳的) 비만(肥滿), 내분비적(內分泌的) 비만(肥滿), 시상하부성(視床下部性) 비만(肥滿), 교감신경계(交感神經系)의 이상(異常)에 의한 비만(肥滿), 운동부족(運動不足)에 의한 비만(肥滿), 飮食에 의한 비만(肥滿), 약물(藥物)에 의한 비만(肥滿), 사회적(社會的), 경제적(經濟的), 심리적(心理的) 요소(要素)에 의한 비만(肥滿) 등(等)으로 구분(區分)하였으며, 지방세포(脂肪細胞)의 양상(樣相)에 따라 지방세포(脂肪細胞)의 크기가 증가(增加)하는 비대형(肥大型), 비만세포(肥滿細胞)의 수(數)가 증가(增加)하는 증식형(增殖型), 두 가지가 같이 일어나는 혼합형(混合型)으로 구분(區分)하였다. 사상의학(四象醫學)에서는 [동의수세보원(東醫壽世保元) 사단론(四端論)]의 "폐이호(肺以呼) 간이흡(肝以吸) 간폐자(肝肺者) 호흡기액지문호야(呼吸氣液之門戶也) 비이납(脾以納) 신이출(腎以出) 신비자출납수반지부고야(腎脾者出納水般之府庫也)" 라고 하여 태양인(太陽人)과 태음인(太陰人)의 비만(肥滿)은 기액지기(氣液之氣)의 대사과정에서 나오는 병증(病證)이라 할 수 있다. 동의수세보원(東醫壽世保元) 태양인(太陽人) 태음인(太陰人) 병증론(病證論)에서 비만(肥滿)에 대해 언급된 것은 없으나 최근(最近) 식생활(食生活), 사회환경(社會環境)의 변화(變化) 및 체질적(體質的)인 요인으로 비만(肥滿)이 올 수 있다고 보고 태양인(太陽人)과 태음인(太陰人)의 처방(處方)과 약재(樂材)가 비만(肥滿)에 미치는 영향을 검토하였다. 실험에서 사용할 전지방세포(前脂肪細胞)(preadipocyte)인 3T3-L1 세포(細胞)는 3T3 세포(細胞)로부터 유래(由來)된 세포주(細胞柱)로써 그 생물학적(生物學的) 특성(特性)이 잘 밝혀져 있고, 적절한 조건아래에서 배양(培養)하면 지방세포(脂肪細胞)(adipocyte cell)로 분화(分化)하는 성질(性質)을 갖고 있어 비방세포(脂肪細胞)의 대사과정(代謝過程)은 물론 지방축적(脂肪蓄積)과 지방세포(脂肪細胞)의 분화과정(分化過程)을 연구(硏究)하는데 널리 사용(使用)되고 있다. 3T3-L1 세포(細胞)를 이용(利用)하여 실험(實驗)한 결과(結果) retinol, retinoic acid, vitamin D group, vitamin E, nicotinamide, phorbol ester, dihydroteleocidin B, lithium 등은 전지방세포(前脂肪細胞)의 지방세포(脂肪細胞)로의 분화(分化)를 억제(抑制)하지만, 이와는 달리 ascorbate， hemin, cadmium, corticosterone, cAMP 등(等)은 지방세포(脂肪細胞)로의 분화(分化)를 촉진(促進)시킨다는 사실이 밝혀져 지방세포(脂肪細胞)의 분화과정(分化過程)을 자세(仔細)하게 이해(理解)할 수 있는 수준(水準)까지 되었다. 본(本) 연구(硏究)에서는 태양인(太陽人) 처방(處方)과 약재(藥材)의 미후등식장탕 오가피장척탕(五加皮壯脊湯) 오가피(五加皮) 노근(蘆根)과 태음인(太陰人) 처방(處方)과 약재(藥材)의 태음위조탕(太陰調胃湯) 청심연자탕(淸心蓮子湯) 청폐사간탕(淸肺瀉肝湯) 갈근부평탕(葛根浮萍湯) 의이인(薏苡仁) 대황(大黃) 상백피(桑白皮) 유근백피(楡根白皮) 제조 해동피(海桐皮) 마황(麻黃) 백모근(白茅根)을 산출(汕出)하여 전지방세포(前脂肪細胞)인 3T3-L1을 이용하여 증식효과(增殖效果)와 자연분화시(自然分化時)의 분화효과(分化效果)와 재분화효과(再分化效果), 유도분화시(誘導分化時)의 분화효과(分化效果)와 재분화효과(再分化效果)에 관해 실험(實驗)한 바 다음과 같은 결론(結論)을 얻었다. 1. 지방세포(脂肪細胞)의 증식효과(增殖效果) 1) 태양인(太陽人) 처방(處方)의 오가피장적탕(五加皮壯脊湯), 미후등식장탕과 약재(藥材)의 오가피(五加皮)에서는 전탕추출과 에탄올추출 모두에서, 노근(蘆根)은 에탄올추출에서 세포증식(細胞增殖)의 억제효과(抑制效果)가 있었다. 2) 태음인(太陰人) 처방(處方)의 청폐사간탕(淸肺瀉肝湯) 갈근부평탕(葛根浮萍湯) 청심연자탕(淸心蓮子湯) 태음위조탕(太陰調胃湯)에서 세포증식(細胞增植)의 억제효과(抑制效果)가 있었다. 약재(樂材)의 전탕추출은 의이인(薏苡仁) 대황(大黃) 상백피(桑白皮) 유근백피(楡根白皮) 마황(麻黃) 해동피(海桐皮), 에탄올추출은 제조 해동피(海桐皮)에서 억제효과(抑制效果)가 있었다. 2. 지방세포(脂肋細胞)의 분화효과(分化效果) 1) 자연분화시(自然分化時)에 태양인(太陽人) 처방(處方)과 약재(藥材)의 경우, 초기분화(初期分化)의 전탕추출은 노근(蘆根), 에탄올추출은 오가피장적탕(五加皮壯脊湯) 오가피(五加皮)에서 세포독성(細胞毒性)의 작용이 나타났다. 2) 자연분화시(自然分化時)에 태음인(太陰人) 처방(處方)과 약재(樂材)의 경우, 초기분화(初期分化)의 전탕추출은 유근백피(楡根白皮) 해동피(海桐皮)에서 세포독성(細胞毒性)의 작용이 나타났다. 재분화(再分化)의 에탄올추출은 청심연자탕(淸心蓮子湯) 마황(麻黃)에서 세포분화(細胞分化)의 억제효과(抑制效果)가 있었다. 3) 유도분화시(誘導分化時)에 태양인(太陽人) 처방(處方)과 약재(藥材)의 초기분화(初期分化)의 경우, 오가피(五加皮)의 에탄올추출은 세포분화(細胞分化)의 억제효과(抑制效果)가 있었다. 오가피장적탕(五加皮壯脊湯) 오가피(五加皮) 노근(蘆根)의 전탕추출은 세포독성(細胞毒性)의 작용이 유추되었다. 4) 유도분화시(誘導分化時)에 태음인(太陰人) 처방(處方)과 약재(藥材)의 초기분화(初期分化)의 경우, 의이인(薏苡仁) 마황(麻黃) 백모근(白茅根)의 전탕추출과 마황(麻黃)의 에탄올추출에서 세포분화(細胞分化)의 억제효과(抑制效果)가 나타났다. 해동피(海桐皮)의 전탕추출과 에탄올추출에서는 세포독성(細胞毒性)의 작용이 나타났다. 이상의 결과로 볼 때에 태양인(太陽人) 태음인(太陰人) 처방(處方)과 약재(藥材)는 증식과정에서 비만(肥滿)이 완전하게 형성되기 전인 지방세포(脂肪細胞)의 증식효과(增殖效果)에서 유의하게 세포증식(細胞增拖)의 억제효화(抑制效果)가 나타났으며 비만치료제로써의 활용가치가 있다고 사려된다. 지방세포(脂肪細胞)의 분화과정(分化過程)에서 생체환경(生體環境)의 조건과 비슷하게 유도분화(誘導分化)된 조건에서는 오가피(五加皮) 마황(麻黃) 의이인(薏苡仁) 백모근(白茅根)에서 유의한 세포분화(細胞分化)의 억제효과(抑制效果)가 있었다. 앞으로 비만(肥滿)의 기전을 밝히기 위하여 동물실험(動物實驗)을 통한 확이니 필요하며, 또한 본 논문이 비만(肥滿)이 억제되는 기전을 유추하는데 도움이 되기를 바란다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국산림과학회지
• /
• 제32권1호
• /
• pp.36-63
• /
• 1976

1974년(年) 천연(天然)소나무집단(集團)에 대한 유전적변이(遺傳的變異)를 분석(分析)하고져 먼저 경북(慶北) 청송군(靑松郡) 소재(所在) 주왕산(周王山)소나무림(林), 충남(忠南) 서산군(瑞山郡) 소재(所在) 안면도(安眠島) 소나무림(林), 그리고 강원도(江原道) 평창군(平昌郡) 소재(所在) 소나무림(林)을 대상(對象)으로하여 각(各) 집단(集團)에서 되도록 소면적(小面積)의 범위내(範圍內)에 서있는 소나무 개체(個體)를 각(各) 20주(株)씩 총 60주(株)를 택(擇)하여 그 모수(母樹)에 대한 형태학적(形態學的) 특성(特性)등을 조사측정(調査測定)하고 집단간(集團間)에 보이는 차이(差異) 그리고 한 집단내(集團內)에 있는 각개체수목(各個體樹木)의 형질(形質)을 조사보고(調査報告)한바 있다(제일보고문(第一報論文). 1974년(年) 가을에 가계별(家系別)로 종자(種字)을 채취(採取)하여서 가계별(家系別) 및 산지별(産地別)의 차이(差異)를 분석(分析)하고 동시(同時)에 그 종자(種字)를 파종하여서 1-0묘(苗) 및 1-1묘(苗)를 대상(對象)으로 생장인자(生長因子)에 대한 측정(測定)을 하고 그 유전력(遺傳力)을 계산(計算)해 보았다. 그밖에 엽록소함량(葉綠素含量) 또는 monoterpene등의 함량(含量)의 차이(差異)를 분석(分析)해 보았다. 종자(種字)의 형태학적(形態學的) 특성(特性)에 있어서는 집단간(集團間) 또 가계간(家系間)에 유의차(有意差)를 보이지 않는 것도 있었으나 대체(大體)로 유의차(有意差)가 인정(認定)되었다. 그리고 각형질간(各形質間)의 상관(相關)을 보았는데 구과폭(毬果幅)과 종자익(種字翼)의 폭(幅), 구과장(毬果長)과 종자익(種字翼)의 길이간(間), 그리고 구과(毬果) 생중량(生重量)과 종자중량간(種字重量間)에는 정(正)의 상관(相關)이 보였다. 묘고(苗高)와 근원경(根元徑)의 성장(成長)에 있어서는 가계간(家系間) 그리고 집단간(集團間)에 차이(差異)가 인정되었다. 묘고(苗高)의 유전력(遺傳力)은 집단(集團)의 평균치(平均値)를 가지고 분석(分析)하였다. 즉 집단(集團)에 관계(關係)되는 분산(分散)을 유전분산(遺傳分散)으로 보고서 유전력(遺傳力)을 계산(計算)해 보았는데 1-0묘(苗)의 묘고(苗高)에서는 0.29, 1-1묘(苗)에서는 0.14가 그리고 근원경(根元徑)에 있어서는 1-0묘(苗)는 0.15, 1-1묘(苗)에서는 0.06이였다. 기공열수(氣孔列數)에 있어서는 집단간차이(集團間差異)가 있었으나 거치밀도(鋸齒密度)에는 차이(差異)가 없었다. 침엽(針葉)의 특성(特性)에 관(關)해서는 모수(母樹)와 차대간(次代間)에 상관(相關)이 없었다. 엽록소함량(葉綠素含量)은 집단간차이(集團間差異)는 보였으나 가계간차이(家系間差異)는 없었다. monoterpene의 성분(成分)에 있어서는 myrcene과 ${\beta}$-phellandrene의 함량(含量)으로 집단차(集團差)를 볼 수 있었다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 농업과학연구
• /
• 제5권2호
• /
• pp.93-114
• /
• 1978

본(本) 시험(試驗)은 농가(農家)에서 부업(副業)으로 면양(緬羊)과 산양(山羊)을 사육(飼育)하여 농가수입(農家收入)을 향상(向上)시킬 수 있는 방안(方案)으로 모색(摸索)하고 아울러 면(緬) 산양(山羊)의 산육성(産育性), 산모성(産毛性), 모피이용성(毛皮利用性), 생리적(生理的) 특성(特性) 및 각(各) 경제형질간(經濟形質間)의 상호관계(相互關係)를 구명(究明)하기 위하여 1977년(年) 5월(月) 5일(日)부터 1977년(年) 11월(月) 26일(日)까지 충남대학교(忠南大學校) 농과대학(農科大學) 부속동물사육장(附屬動物飼育場)과 대전근교(大田近郊)의 농가(農家)를 선정(選定)하여 양(羊)의 발육성적(發育成績), 도체성적(屠體成績), 내장중량(內臟重量), 혈액(血液) 및 혈장성분(血漿成分), 채식성(採食性), 경제성(經濟性)을 분석(分析)하고 아울러 각(各) 경제형질간(經濟形質間)의 상관(相關)을 산출(算出)하여 비교검토(比較檢討)하였다. 본(本) 시험(試驗)에서 얻어진 결과(結果)를 요약(要約)하면 다음과 같다. 1. 산육성(産肉性) 및 육질(肉質) 1) 면양(緬羊)고 산양(山羊)의 발육성적(發育成績)은 196일간(日間)을 사육(飼育)한 결과(結果), 시험개시시(試驗開始時) 평균(平均) 체중(體重) 20kg와 8kg의 2배(倍)로 각각(各各) 증가(增加)되었다. 2) 면양(緬羊)은 사사구(舍飼區)와 방목구간(放牧區間)의 증체량(增體量)에 유의적(有意的) 차이(差異)가 없었다. 3) 산양(山羊)의 사육(飼育)은 전염성(傳染性) 질병(疾病)의 오염(汚染)이 없는 공주군(公州郡) 야산지대(野山地帶)에서 발육성적(發育成績)이 양호(良好)하였다. 4) 면양(緬羊)의 18개월령(個月齡) 체척측정치(體尺測定値)에서 체고(體高)에 대(對)한 비율(比率)은 십자부고(十字部高) 103%, 체장(體長) 104%, 흉심(胸心) 44%, 흉폭(胸幅) 31%, 요각폭(腰角幅) 23%, 흉위(胸圍) 135%, 전관위(前管圍) 15%였다. 재래산양(在來山羊)은 8개월령(個月齡)에서 십자부고(十字部高) 106%, 체장(體長) 109%, 흉심(胸深) 46%, 흉위(胸圍) 122%로서 면양(緬羊)보다 십자부고(十字部高), 체장(體長)과 흉심(胸心)의 비율(比率)이 높았으나 흉위(胸圍)의 비율(比率)은 낮았다. 5) 도체성적(屠體成績)에서 면양(緬羊)은 도체율(屠體率)은 $47.52{\pm}2.27%$, 골격비율(骨格比率) $9.75{\pm}1.49%$, 두골비율(頭骨比率) $2.68{\pm}0.42%$, 피모비율(皮毛比率) $20.95{\pm}2.14%$였으며, 재래산양(在來山羊)에서는 도체율(屠體率) $45.58{\pm}5.63%$, 정육율(精肉率) $27.62{\pm}3.81%$, 내장비율(內臟比率) $34.86{\pm}4.16%$, 골격(骨格), 두골(頭骨), 피모비율(皮毛比率)이 각각(各各) $11.66{\pm}1.86%$, $3.63{\pm}1.61%$, $9.26{\pm}2.41%$이었다. 6) 한국재래산양(韓國在來山羊)을 방목사사(放牧舍飼)할 경우 생산(生産)되는 도육(屠肉)의 수분(水分), 조단백(粗蛋白), 조지방(粗脂肪), 조회분(粗灰分) 함량(含量)은 근사(近似)한 차이(差異)를 나타내었다. 또한 방목(放牧) 및 사사(舍飼)한 면양도육(緬羊屠肉)을 분석(分析)한 결과(結果) 방목구(放牧區)는 사사구(舍飼區)에 비하여 수분(水分) 및 단백질함량(蛋白質含量)이 높고 지방함량(脂肪含量)은 감소(減少)하였다. 7) 각(各) 내장(內臟)의 중량(重量)은 면양(緬羊)과 재래산양(在來山羊)이 비교적(比較的) 유사(類似)한 변화(變化) 경향(傾向)을 보였는데 간장(肝臟), 심장(心臟), 신장(腎臟), 비장(脾臟)은 비교군간(比較群間)에 유의성(有意性)이 인정(認定)되지 않았으며, 제(第)1 제(第) 2위(胃) 및 대(大), 소장(小腸)은 방목구(放牧區)가 사사구(舍飼區)에 비(比)하여 유의(有意)하게 높은 값을 나타냈고 복강내(腹腔內)의 지방량(脂肪量)은 사사구(舍飼區)가 방목구(放牧區)보다 유의성(有意性)이 인정(認定)되는 높은 값을 나타냈다. 2. 산모성(産毛性) 및 모피(毛皮) 1) 7개월간(個月間) 사육(飼育)한 면양(緬羊)의 산모량(産毛量)은 $3.88{\pm}1.02kg$였으며 산모량(産毛量)은 $9.27{\pm}1.48%$, 모속량(毛束量)) $8.47{\pm}1.00cm$ 직선모장(直線毛長) $10.63{\pm}0.99cm$, 1일(日) 모성장(毛成長)은 $0.40{\pm}0.44cm$ Crimp수(數)는 $2.78{\pm}0.40$이였다. 2) 면양모피(緬羊毛皮)를 명(明)유제하여 부위별(部位別)로 항장력(抗長力) 및 인열강도(引裂强度)를 조사(調査)한 결과(結果) 둔부(臀部)가 항장력(抗張力) $1.35kg/mm^2$ 인열력(引裂力) $2.252kg/mm^2$로서 가장 강(强)하였으며 배부(背夫), 견부(肩部)의 순위(順位)로로 항장력(抗張力) 및 인열력(引裂力)을 나타내었다. 3. 초지(草地)의 이용(利用) 및 개량(改良) 1) 재래산양(在來山羊)의 방목(放牧) 및 계목시(繫牧時)의 채식량(採食量)은 오전(午前)에 비하여 오후(午後)가 많았으며 방목(放牧) 및 계목간(繫牧間)에는 큰 차이(差異)를 나타내지 않았다. 면양(緬羊)의 방목(放牧)과 계목시(繫牧時)의 채식량(採食量)은 방목(放牧)이 계목(繫牧)보다 우수하였으며 오전9午前)에 비(比)하여 오후(午後)가 다량(多量) 채식(採食)하였다. 2) 재래산양(在來山羊)과 면양(緬羊)을 이용(利用)하여 제경조성(蹄耕造成)한 목초지(牧草地)의 정착상태(定着狀態)를 조사(調査)한 결과 재래산양구(在來山羊區)는 6025% 면양구(緬羊區)는 77.35%로서 면양(緬羊)의 이용(利用)이 우수(優秀)하였고 재래산양(在來山羊)은 방목력(放牧力)의 부족(不足)으로 제경효과(蹄耕效果)가 적었다. 4. 각(各) 경제형질(經濟形質)의 상관(相關) 1) 면양(緬羊)의 산육성(産肉性)과 여러 형질(形質)사이의 상관(相關)은 생체중(生體重)과 일당증체량간(日當增體量間)에 높은 상관(相關)을 보여 주었고 기타(其他) 형질(形質)사이에서는 별로 상관(相關)이 없었으나 흉추(胸椎)길이와 생체중(生體重), 일단증체량(日當增體量), 정육율간(精肉率間)에서는 비교적(比較的) 높은 상관(相關)이 나타나고 있다. 재래산양(在來山羊)에 잇어서는 생체중(生體重)과 일당(日當) 증체량(增體量) 사이에 높은 상관(相關)이 있었으며 도체중(屠體重)과 정육량(精肉量) 사이에도 비교적(比較的) 높은 상관(相關)이 있었으나 내장중(內臟重)과 생체중(生體重), 일당(日當) 증체량(增體量) 사이에는 부(負)의 상관(相關)을 보여주고 있다. 2) 면양(緬羊)의 산모성(産毛性) 형질(形質) 상호간(相互間)의 상관(相關)에서는 산모량(産毛量)과 생체중(生體重), 일당(日當) 증체량(增體量), 산모율간(産毛率間)에 1% 수준(水準)에서 높은 상관(相關)을 나타내고 있어 성장(成長)이 빠른 개체에 산모량(産毛量)도 많다는 것을 추정할 수 있었다. 3) 산육성(産肉性) 형질(形質)과 체척측정치(體尺測定値) 사이의 상관(相關)은 면양(緬羊)에서는 생체중(生體重), 정육중(精肉重), 내장중(內臟重)과 흉위(胸圍), 체장(體長)사이에서 제일 높았고, 도체중(屠體重), 정육중(精肉重)과 비교적(比較的) 높은 부위(部位)는 흉폭(胸幅), 흉심(胸深)이었다. 따라서 면양(緬羊)의 체척측정(體尺測定)에 중점(重點)을 두는 것이 유효(有效)할 것으로 생각된다. 재래산양(在來山羊)의 산육성(産肉性) 형질(形質)과 체척측정치(體尺測定値) 사이에는 체척부위(體尺部位)의 대부분이 산육성형질(産肉性形質)과 높은 상관(相關)을 나타내고 있으며 특히 흉위(胸圍)와 생체중(生體重), 도체중(屠體重), 정육중(精肉重), 골격비율(骨格比率)사이에서는 0.922~0.974의 높은 상관(相關)을 보여주고 있다. 한편 산육성(産肉性) 형질(形質)과 흉심(胸深), 전관위(前管威), 체장(體長)사이에도 각각(各各) 0.759~0.911, 0.759~0.909, 0.708~0.872의 비교적(比較的) 높은 상관(相關)을 나타내고 있다. 따라서 재래산양(在來山羊)에 대한 산육성(産肉性) 추정(推定)은 흉부(胸部)에 대한 c체척치(體尺値)가 상당히 큰 의의(意義)가 있을 것으로 본다. 5. 혈액상(血液像) 및 혈장성분(血漿成分) 1) 적혈구수(赤血球數)와 평균(平均) 혈색소농도(血色素濃度)는 재래산양(在來山羊)이 각각(各各) $12.93{\times}10^6/mm^3$와 36.26%에 대하여 유의성(有意性)이 인정(認定)되는 높은 값을 나타냈다. 2) 혈색소량(血色素量), 적혈구용적(赤血球容積), 평균(平均) 적혈구용적(赤血球容積) 및 평균혈색소량(平均血色素量)은 재래산양(在來山羊)이 각각(各各) 10.92g/100ml, 3.02ml/100ml, $23.40{\mu}^3$ 및 10.94pg로서 면양(緬羊)의 11.73g/100ml, 36.25ml/ml, $33.97{\mu}^3$ 및 8.43pg에 비하여 낮은 값을 나타냈는데 모두 유의성(有意性)이 인정(認定)되었다. 3) 백혈구(白血球)의 수(數)는 재래산양(在來山羊)이 $11.64{\times}10^3/mm^3$을 나타내어 면양(緬羊) $9.32{\times}10^3/mm^3$보다 유의(有意)하게 높은 값을 나타냈다. 4) 백혈구(白血球)의 감별(鑑別) 수(數)에 있어서 호염구(好鹽球)는 재래산양(在來山羊)이 임파구(淋巴球)는 면양(緬羊)이 유의(有意)학 높은 값을 나타냈으며 호염구(好鹽區), 호산구(好酸球) 및 단핵구(單核球)는 차이(差異)가 없었다. 5) 혈장중(血漿中)에 함유(含有)되어 있는 총단백질(總蛋白質)과 포도당(葡萄糖)의 양(量)은 재래산양(在來山羊)이 각각(各各) 62g/100ml와 53.6mg/100ml로서 면양(緬羊)의 5.6g/100ml와 45.7mg/100ml보다 유의(有意)하게 높은 값을 나타냈으며, 총지질(總脂質)의 양(量)은 재래산양(在來山羊)이 127.6mg/100ml로서 면양(緬羊)의 149.6mg/100ml보다 유의성(有意性)이 인정(認定)되는 낮은 값을 나타냈다. 6) 비단백질태질소화합물(非蛋白質態窒素化合物), Cholesterol, Ca, P, K, Na 및 Cl의 함량(含量)은 면양(緬羊)과 산양간(山羊間)에 차이(差異)가 없었다. 6. 경제성분석(經濟性分析) 1) 면양(緬羊)과 산양(山羊)을 196일간(日間) 사육(飼育)하였을 때 농가수익(農家收益)은 1두당(頭當) 4,000원 정도(程度)였으며 농가(農家)에서 부업(副業)으로 사육(飼育)할 수 있는 적정규모(適正規模)는 5~10두(頭)이다.