• Korean Institute of Interior Design Journal
• /
• v.23 no.6
• /
• pp.187-194
• /
• 2014

Corporate images are created inside the corporate and then peppered throughout the public such as consumers, communities, countries, etc. who are outside the corporate. Therefore, corporations express their corporate images through such visible images as CI, products, brands, advertisements, company buildings, etc. in order to form a favorable corporate image for the public. Therefore, many corporations have begun to express various visual factors in order to form their images. So, the purpose of this study is to determined the connectivities of corporate images and facade design of company buildings, and to elicit the findings of whether corporate images are applied to the facade design of company buildings, and of what expressive factors are applied to the design, if so. The conclusions are as follows: First, an examination of the degree that the characteristics of corporate images and design components of the facade design of company buildings have been expressed showed that corporations preferred the design of company buildings on which a lot of components have been expressed. Second, it also showed that they preferred determinants of the facade design of company buildings in the order of architectural factors > visual factors > decorative factors. Third, it indicated that the corporations on which the design components of the facade design of company buildings have been reflected most were in the order of C > B, D > A, E > G > F, J > H, I. Fourth, it further showed that most of the corporations have used curtain walls as materials of the facade design.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.4
• /
• pp.329-334
• /
• 2013

Order spectrum analysis is widely used to grasp the features of noises due to powertrain system including engine and intake/exhaust system. It is known from many previous researches that order components related to the first and second firing frequencies of engine considerably affect the noise of car interior. The purpose of this paper is to find out the difference in sound quality: Pleasantness of car interior noise according to the change of its order spectrum. For this, car interior noises of 6-cylinder and 4-cylinder engines are recorded and their order spectrum levels are modified by applying adaptive digital filters. After subjective listening test employing paired comparison method is conducted, it is investigated that the level change of half-order components is a noticeable factor to improve Pleasantness of the car interior noises whereas level decrease of firing order does not always give the positive effect on its sound quality.

• Journal of Korean Academy of Nursing Administration
• /
• v.12 no.1
• /
• pp.76-93
• /
• 2006

Purpose: The purpose of this study was to define the core components required of nurses to provide quality nursing care to patients and analyze the significance of these components in the hospital's various units to maintain a high level of competence among nurses. Method: The study evaluated 3 categories included 35 subcategories with 148 core components that were derived from literature review and interviews of nursing professionals. The nursing professional category included 18 subcategories with 98 components, the organizational culture category included 4 subcategories with 16 components, and the temperament-attitude category included 13 subcategories with 34 components. The study included 335 nurses with more than one year of hospital experience and measured disparities among different hospital units. The data was analyzed with SPSS-Win 10.0, differing perceptions of the importance of general traits among the participants were measured using standard deviation, and differing perceptions of the importance of professional traits among the participants were assessed using ANOVA and subsequently with the Bonferroni Test. The reliability of the aforementioned research tools were evaluated using the Cronbach's ${\alpha}$. Result: The results of the study were as follows: 1. Among the three categories, temperament-attitude category was perceived to be the most important, followed by nursing professional category and organizational culture category. Among the ten most important subcategories within the three categories, safety and infection prevention as well as responsibility were perceived to be the most important, followed by promotion of physiologic adaptation, document management and presentation, self-control, ethics, observance law, coping with emergency, humanity, and medication. 2. The relative importance of category associated with the core competencies within the hospital unit were as follows : 1) The units that rated nursing professional category as being the most significant were: internal medicine, surgical unit, mother-child unit, emergency room, intensive care unit, and operating room, in that order. 2) The units that rated the organizational culture competencies as being the most significant were: mother-child unit, internal medicine, surgical unit, emergency room, operating room, and intensive care unit, in that order. 3) The units that rated temperament-attitude category as being the most significant were: internal medicine, surgical unit, emergency room, mother-child unit, operating room, and intensive care unit, in that order.

• Structural Engineering and Mechanics
• /
• v.60 no.1
• /
• pp.1-19
• /
• 2016

In this study, the supersonic panel flutter of doubly curved composite sandwich panels with variable thickness is considered under aerothermoelastic loading. Considering different radii of curvatures of the face sheets in this paper, the thickness of the core is a function of plane coordinates (x,y), which is unique. For the first time in the current model, the continuity conditions of the transverse shear stress, transverse normal stress and transverse normal stress gradient at the layer interfaces, as well as the conditions of zero transverse shear stresses on the upper and lower surfaces of the sandwich panel are satisfied. The formulation is based on an enhanced higher order sandwich panel theory and the vertical displacement component of the face sheets is assumed as a quadratic one, while a cubic pattern is used for the in-plane displacement components of the face sheets and the all displacement components of the core. The formulation is based on the von $K{\acute{a}}rm{\acute{a}}n$ nonlinear approximation, the one-dimensional Fourier equation of the heat conduction along the thickness direction, and the first-order piston theory. The equations of motion and boundary conditions are derived using the Hamilton principle and the results are validated by the latest results published in the literature.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.11 s.176
• /
• pp.64-71
• /
• 2005

In order to measure surface roughness profile, stylus type equipments are commonly used, but the stylus keeps contact with surface and damages specimens by its tip pressure. Therefore, optics based measurement systems are developed, and light phase interferometer, which is based on light interference phenomenon, is the most noticeable research. However, light interference based measurements require translation mechanisms of nano-meter order in order to generate phase differences or multiple focusing, thus the systems cannot satisfy the industrial need of on-the-machine and in-process measurement to achieve factory automation and productive enhancement. In this research, we focused light reflectance phenomenon rather than the light interference, because reflectance based method do not need translation mechanisms. However, the method cannot direct]y measure surface roughness profile, because reflected light consists of several components and thus it cannot supply surface height information with its original form. In order to overcome the demerit, we newly proposed an image processing based algorithm, which can separate reflected light components and conduct parameterization and reconstruction process with respect to surface height information, and then confirmed the reliability of proposed algorithm by experiment.

• The Journal of Information Systems
• /
• v.16 no.4
• /
• pp.107-129
• /
• 2007

The purpose of this study is to examine the effect of logistics service quality and relationship orientation factors on customer satisfaction and loyalty in the electronic commerce context. Based on extensive review of relevant literature, nine components of logistics service quality(i.e. information quality, ordering procedures, ordering release quantities, timeliness, order accuracy, order quality, order condition, order discrepancy handling and personnel contact quality) and six components of relationship orientation(i.e. trust, bonding, communication, shared value, empathy and reciprocity) are introduced in this study. And a conceptual model is developed and five research hypotheses are empirically examined using structural equation modeling. The findings indicate that logistics service quality and relationship orientation are positively and significantly associated with customer satisfaction, and customer satisfaction is the antecedent variable of customer loyalty in the Internet Shopping Mall. In addition, a significant impact of logistics service quality on relationship orientation of the customer is revealed. Implications of these findings are discussed, and limitations of the study as well as further research directions are addressed.

• The KIPS Transactions:PartD
• /
• v.11D no.3
• /
• pp.625-634
• /
• 2004

When constructing a component based system, It is understood that identifying reusable and independent business components is of utmost importance. However, according to conventional component based developing methodologies, most of developers depend on their experience and/or intuition for identification of business components. Furthermore, there are no criteria to evaluate whether the identified business components are more independently defined or not. Therefore, we propose a component identification metrics to apply to component properties In order to complement the difficulties of identifying business components through developers' experience and/or intuition. The metrics defined are the criteria for identifying the business Components and/or for evaluating the Identified components. We propose both a cohesion metric, and a coupling metric, to which component properties are applied, wherein those properties can be understood by high cohesion in, and low coupling between, components. Moreover, we propose an independence metric that can evaluate the degree of independence for a particular component by ratio of the cohesion and coupling of components. The metrics that we propose are applied to case study which demonstrates the identification of more independent business components and the validity of our metrics.

• Earthquakes and Structures
• /
• v.22 no.1
• /
• pp.1-13
• /
• 2022

When a building suffers damages under moderate to severe loading condition, its physical properties such as damping and stiffness parameters will change. There are different practical methods besides various numerical procedures that have successfully detected a range of these changes. Almost all the previous proposed methods used to work with translational components of mode shapes, probably because extracting these components is more common in vibrational tests. This study set out to investigate the influence of using both rotational and translational components of mode shapes, in detecting damages in 3-D steel structures elements. Three different sets of measured components of mode shapes are examined: translational, rotational, and also rotational/translational components in all joints. In order to validate our assumptions two different steel frames with three damage scenarios are considered. An iterative model updating program is developed in the MATLAB software that uses the OpenSees as its finite element analysis engine. Extensive analysis shows that employing rotational components results in more precise prediction of damage location and its intensity. Since measuring rotational components of mode shapes still is not very convenient, modal dynamic expansion technique is applied to generate rotational components from measured translational ones. The findings indicated that the developed model updating program is really efficient in damage detection even with generated data and considering noise effects. Moreover, methods which use rotational components of mode shapes can predict damage's location and its intensity more precisely than the ones which only work with translational data.

• Structural Engineering and Mechanics
• /
• v.18 no.4
• /
• pp.475-491
• /
• 2004

Anchorage devices play an important role in post-tensioned bridge structures since they must sustain heavy loads in order to permit the transfer of the prestressing force to the structure. In external prestressing, the situation is even more critical since the anchorage mechanisms, with the deviators, are the only links between the structure and the tendons throughout the service life of the structure. The behaviour of anchorage devise may be studied by using the finite element method. To do so, each component of the anchorage must be adequately represented in order to approximate the anchor mechanism as accurately as possible. In particular, the modelling of the jaw/tendon device may be carried out using the real geometry of these two components with an appropriate constitutive contact law or by replacing these components by a single equivalent. This paper presents the numerical study of a mono-strand anchorage device. The results of a comparison between two different representations of the jaw/tendon device, either as two distinct components or as a single equivalent, will be examined. In the double-component setup, the influence of the wedge configuration composing the jaw, and the influence of lubrication of the anchor, will be assessed.

• IE interfaces
• /
• v.18 no.4
• /
• pp.485-493
• /
• 2005

In this study, a method that can objectively and systematically design the layout of user interface components was developed. In order to explain its application method, the method was applied to the layout design of facsimile. In particular, in order to validate the suitability of the method, comparison tests were performed for the case of facsimile. Computer simulators for layout design were made using Micromedia Flash and comparison evaluation for an existing layout and a new layout was performed in three aspects. The first comparison method was to measure and compare its movement distance when carrying out a task in two layout models. The second one was to measure and compare users' performance. The last one was to measure and compare users' subjective satisfaction after using two models. As the result, new layout design was better than the existing design in all comparison tests. The movement distance of the new layout design model was shorter than the existing model. And, its performance including task completion time and error frequency was better and users' satisfaction was higher than the existing. In conclusion, the method that was developed in this study can be very effectively used in the layout design of user interface components.