• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2004년도 ISMP Pb-free solders and the PCB technologies related to Pb-free solders
• /
• pp.93-99
• /
• 2004

At present, LG Electronics pushes ahead to eliminate the Pb(Lead) -a hazardous material- from all products. Especially, we have performed to select the optimum standard composition of lead free alloy for the application to products for about 3 years from 2000. These days, we have the chance for applying to the mass-production. This project constructed the system for applying the lead free solders on consumer electronic products, which is one of the major products of the LG Electronics. To select the lead free solders with corresponding to the product features, we have passed through the test and applied with Sn-3.0Ag-0.5Cu alloy system to our products, and for the application to the high melting temperature composition, we secured the thermal resistance of the many parts and substrate and optimized the processing conditions. We have operated the temperature cycling test and the high temperature storage test under the standards to confirm the reliability of the products. On these samples, we considered the consequence of our decision by the operating test. For the long life time of the product, we have operated the temperature cycling test at $-45^{\circ}C-+125^{\circ}C$, 1 cycle/hour, 1000 cycles. Also we have tested the tin whisker growth about lead free plating on lead finish. We have analyzed with the SEM, EDS and any other equipment for confirming the failure mode at the joint and the tin whisker growth on lead free finish.

• 한국조리학회지
• /
• 제24권1호
• /
• pp.31-38
• /
• 2018

The purpose of this study was to provide the basic information of making Skate pipyun made of skate skin. Test for quality characteristics of skate pipyuns seasoned with garlic, ginger, rosemary and basil were carried out. Hardness of GAR(4% of garlic and rosemary) was the highest, while that of GIB(4% of ginger and basil) was the lowest. As for the adhesiveness, springiness and cohesiveness, each specimen did not manifest significant difference. Water contents (82.43~85.56%) were no significant differences. The pipyuns added with spices and herbs were appeared weakly alkali with a range of pH 8.46~8.58. In the sensory evaluation, GIB was the most preferred in overall preference with significantly higher evaluation of flavor, savory taste, and lower fishy odor. The stability of gels decreased during storage at $10^{\circ}C$ for 8 hours, and at $20^{\circ}C$ for 60 min, and the greater was in GIB. Therefore, heating a mixture of 40% skate skin with 60% water for 10 min is recommended as optimum conditions for producing Skate pipyun.

• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2751-2761
• /
• 1994

A numerical investigation on the three-dimensional laminar natural convection heat transfer in the periodically fully developed PCB channel has been performed. When heat generating blocks mounted on the adiabatic wall make a channel with their facing shrouding wall, the flow inside the channel becomes periodically fully developed. A single module in the periodically fully developed region is chosen for computational domain in order to save computer storage and computational time. The periodic boundary condition is applied in the anlaysis. The effects of the parameters such as the Rayleigh number, the number of the modules, and the height of channel are examined to obtain the optimum condition for the enhancement of the cooling effectiveness. The result shows that the cooling effect is improved with increasing Rayleigh number and channel height, and decreasing the number of the module. The result also indicates that increasing the height of the channel and number of the module is recommended for a limited space.

• Applied Biological Chemistry
• /
• 제12권
• /
• pp.7-11
• /
• 1969

Mucor-rennin, the crystalline milk-clotting enzyme, isolated from Mucor pusillus var. Lindt, has an acid protease activity. The optimum pH for the digestion of k-casein is 4.5, while that for hemoglobin digestion is 4.0. The skim milk solution was easily clotted acidic solution than alkalin solution, and the milk clotting activated by Ca ion. The enzyme was heat stable against heat from pH 4.0 to 6.0 but was more stable at pH 5.0. The activity of the enzyme at pH 5.0 did not decrease at 30 C for 15 days and the activity was not effected by sodium propionate and salicilic acid. Therefore, the enzyme of liguid type could store for a long time and could be transported from Erzyme production Co. to Manufacture of cheese Co. by adding the antiesptic and by adjusting pH to 5.0.

• 한국연초학회지
• /
• 제24권1호
• /
• pp.46-52
• /
• 2002

This study was carried out to investigate the transfer rate of I-menthol constituent into cigarette case and delivery rate to cigarette smoke. Test sample was used a light-type standard brand cigarette made in Korea. I-Menthol contents was measured according to A.O.A.C(1990) method by G.C and smoking conditions was a puff volume of 35$m\ell$ and 2.0s duration, taken once per minute to filter tipping paper plus 3mmwith 20 cigarettes. Migration rate of menthol into cigarette case had an interrelation with triacetin contents into filter and 6% triacetin level was most suitable. I-Menthol transferred to filter part from tobacco sheet by 20.2% in one month after cigarette manufacture, and the transfer was continued subsequently. Maximum menthol transfer in five months was 4.1% to foils and other packing materials and the loss outside of cigarette pack was also 3.9% below. The migration balance of menthol into cigarette pack and the delivery to cigarette smoke were the optimum condition when menthol was added at the ration of 30% in filter to 70% in the other parts into cigarette.

• 미생물학회지
• /
• 제26권3호
• /
• pp.207-214
• /
• 1988

A cytosine deaminase from the cell-free extract of an isolate was examined after ethyl alcohol reactionation. The enzyme catalyzed the conversion of 5-fluorocytosine to 5-fluorouracil by the possession of specificity to the substrate. The optimum temperature and storage time on the stability of the enzyme were at below $50^{\circ}C$ and near 2 days in tris-HCl buffer. The maximum activity was also presented ar 9.0 in pH and $45^{\circ}C$ in temperature. The pHs and temperatures for the enzyme activity ranged from 8.5-9.5 and from 40-$50^{\circ}C$, respectively. the presence of $Ag^{+}, Hg^{2+}, Zn^{2+}$ in the reaction mixture resulted in the marked inhibition in the activity, but 1mM of $Fe^{3+}, K^{+}$, or $Na^{+}$ increased the enzyme activity. The enzyme preparation was vot affected by inhibitors used except N-ethylmaleimide of 1 and 10mM, and considerably activated by 1mM of pyrophosphate and 10mM of phosphate.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.908-914
• /
• 2019

Fusion power shutdown system (FPSS) is a safety system to stop plasma in case of accidents or incidents. The gas injection system for the FPSS presented in this work is designed to research the flow development in a closed system. As the efficiency of the system is a crucial property, plenty of experiments are executed to get optimum parameters. In this system, the flow is driven by the pressure difference between a gas storage tank and a vacuum vessel with a source pressure. The idea is based on a constant volume system without extra source gases to guarantee rapid response and high throughput. Among them, valves and gas species are studied because their properties could influence the velocity of the fluid field. Then source pressures and volumes are emphasized to investigate the volume flow rate of the injection. The source pressure has a considerable effect on the injected volume. From the data, proper parameters are extracted to achieve the best performance of the FPSS. Finally, experimental results are used as a quantitative benchmark for simulations which can add our understanding of the inner gas flow in the pipeline. In generally, there is a good consistency and the obtained correlations will be applied in further study and design for the FPSS.

• 한국작물학회지
• /
• 제58권3호
• /
• pp.324-330
• /
• 2013

농업유래의 바이오매스 중 볏짚의 저장형태와 저장기간에 따른 수분함량 변화와 바이오매스의 화학적 성분 변화를 분석함으로써 바이오에탄올 생산을 위한 원료의 최적 저장방법을 제시하고자 하였다. 주요 결과는 아래와 같다. 1. 볏짚의 수분함량 변이를 측정한 결과 실내에서 보관한 사각곤포 및 원형곤포는 약 20~25%의 수분함량을 유지하였으며 실외에서 보관한 비가림 시설을 도입한 사각곤포의 경우 20%이하의 낮은 수분함량을 확인하였다. 2. 볏짚의 화학적 성분의 변이를 분석한 결과 실외보관곤포는 cellulose 및 hemicellulose의 함량이 큰 폭으로 감소하였으나, 실내에서 보관한 곤포들은 비닐원형곤포를 제외한 나머지 집속형태에서는 오히려 성분의 함량의 증가를 확인하였다. 3. 볏짚을 장기간 보관할 때에는 외부환경을 차단할 수 있는 실내에서 보관하거나 부득이하게 실외에서 보관할 때 최소 비가림 시설을 도입하여 수분함량 및 화학적 성분의 감소를 최소화해야 바이오에탄올 생산을 위한 고품질의 원료로써 이용될 수 있을 것이다.

• 한국식품영양과학회지
• /
• 제19권6호
• /
• pp.617-624
• /
• 1990

유과제조에 좋은 특성을 갖는 일반계 찹쌀(품종： 신선)을 이용하여, 유과의 기업적 생산에 필요한 유과의 제조조건 및 팽화기작 추적 시험을 실시하였다. 유과 반데기 제조를 위한 증자시간은 증기가열로 5, 10, 15, 30, 45, 60분 처리에서 15분이 가장 적당하였고. 반죽의 수분함량은 48, 51, 53%를 시험한 결과, 48% 수준에서 조직이 가장 치밀하였다. 꽈리치는 시간은 1, 3, 4분간에 유의적인 차이가 없이 품질이 우수하나. 전혀 꽈리치기를 하지 않은 처리구는 조직의 치밀성이 낮고, 경도가 아주 유약하였다. 습식 및 건식제 분등 제분방법별 고온처리에 의한 공정단순화 시도에서 습식제분이 건식제분보다 팽화율이 높았으나, 고온처리 시간이 길어질수록 팽화율이 낮아졌고, 환원당량도 증가하여 전분의 분해가 이루어짐을 알 수 있었고. 이들이 유과의 팽화에 부정적인 영향을 주었으나. 각종 두류를 첨가한 결과 단백질 함량이 높아짐에 따라 유과특성이 개선되었다. 반데기는 장기저장시 RM에 따라 흡습정도가 달라졌고, 저장기간에 따라 팽화후 유과 바탕의 품질은 열화 되었다. 유과제조시 주류로서 막걸리, 소주, 청주를 각각 다른 양 첨가하여 품질을 비교한 결과, 첨가량이 중량비로 15%에서 30%로 증가함에 따라서 팽화율 및 조직특성이 다소 향상되었다.

• 한국식품과학회지
• /
• 제30권3호
• /
• pp.562-568
• /
• 1998

흑미(진도흑미와 수원 415호)를 백미(동진)에 5%, 10% 혼용하여 취반하고 texture analyser와 color and color difference meter를 이용하여 혼용밥의 텍스쳐와 색도의 변화를 알아보고자 하였다. 동진백미는 침지 50분 후에, 진도흑미와 수원 415호는 11시간 이후에 평형수화시간에 도달하였다. 수화에 필요한 가수량은 1.6배가 적당하였으며, 이 때의 경도는 진도흑미를 5% 첨가한 혼용밥에서는 $5.66\;kg_f$이었다. 침지온도와 시간이 경과함에 따라 수원415호가 진도흑미 보다 색소용출속도가 약 4배 빨라졌다. 흑미 색소용출액의 pH는 시간이 경과함에 따라 낮아졌는데 수원415호가 $20^{\circ}C$에서 120분까지 침지시 pH가 6.40에서 6.16으로 낮아졌다. 흑미의 첨가량이 많아질수록 가수율에 관계없이 혼용밥의 명도(L값)는 감소하고, 적색도(a값)는 증가하였다. 혼용밥을 7일간 냉장$(4{\pm}1^{\circ}C)$ 보관한 후 전자렌지를 이용하여 가열시 취반 직후의 텍스쳐로 회복되는데 90초에서 120초 사이가 적당하였다.