• 해양환경안전학회지
• /
• 제1권2호
• /
• pp.69-82
• /
• 1995

This study is concerned with developing a heuristic algorithm for solving a class of ninlinear integer programs(NLIP). Exact algrithm for solving a NLIP either may not exist, or may take an unrealistically large amount of computing time. This study develops a new heuristic, the Excursion Algorithm(EA), for solving a class of NLIP's. It turns out that excursions over a bounded feasible and/or infeasible region is effective in alleviation the risks of being trapped at a lical optimum. The developed EA is applied to the redundancy optimization problems for improving the system safety, and is compared with other existing heuristic methods. We also include simulated annealing(SA) method in the comparision experiment due to ist populatrity for solving complex combinatorial problems. Computational results indicate that the proposed EA performs consistently better than the other in terms of solution quality, with moderate increase in computing time. Therefore, the proposed EA is believed to be an attractive alternative to other heuristic methods.

• Nuclear Engineering and Technology
• /
• 제28권5호
• /
• pp.440-451
• /
• 1996

With emphasis on safety, this study addresses for better design condition for the cooling system in a wet-type interim spent fuel storage facility, using a probabilistic safety assessment method. To incorporate the design renovation into the design phase, a simple approach is proposed. By taking the cooling system of a reference design, a fault tree analysis was performed to identify the weak point of the considered system, and then basic factors for design renovation were defined. A total of 21 design alternatives were selected through the combination of the basic factors. Finally, the optimum design alternative for the cooling system is derived by means of the cost and effect analysis based on the estimated cost, system reliability and assumed probabilistic safety criteria. With the assumption that the failure frequency of at-reactor spent fuel cooling system compiles with probabilistic safety criteria for the interim spent fuel cooling system, it was shown that the optimum alternative should have l00% cooling loop redundancy with one pump per cooling loop and a cleanup system installed separately from the main loop. Furthermore, it also should be classified into safety system. The result of this study can be used as a useful basis to identify factors of safety concern and to establish design requirements in the future. The method also can be applied for other nuclear facilities.

• Structural Engineering and Mechanics
• /
• 제26권4호
• /
• pp.459-477
• /
• 2007

A bi-directional tuned mass damper (BTMD) in which a mass connected by two translational springs and two viscous dampers in two orthogonal directions has been introduced to control coupled lateral and torsional vibrations of asymmetric building. An efficient control strategy has been presented in this context to control displacements as well as acceleration responses of asymmetric buildings having asymmetry in both plan and elevation. The building is idealized as a simplified 3D model with two translational and a rotational degrees of freedom for each floor. The principles of rigid body transformation have been incorporated to account for eccentricity between center of mass and center of rigidity. The effective and robust design of BTMD for controlling the vibrations in structures has been presented. The redundancy of optimum design has been checked. Non dominated sorting genetic algorithm (NSGA) has been used for tuning optimum stages and locations of BTMDs and its parameters for control of vibration of seismically excited buildings. The optimal locations have been observed to be reasonably compact and practically implementable.

• 한국물환경학회지
• /
• 제27권5호
• /
• pp.654-660
• /
• 2011

One of the best way to control Combined Sewer Overflow (CSO) is proposed to construct first flush storage tank. But there is little known parameters for optimum design of these facilities. This study was conducted to get optimum design parameters for a first flush storage tank construction. The optimization of the tank is generally based upon some measure of SS(Suspended Solid) mass holding efficiency. Water quality deterioration of receiving water body happened right after first time occurring rainfall in dry weather seasons. So, design rainfall intensity is used at 2 mm/hr for peak of monthly average intensities of dry seasons. The capacities for each evaluated catchment are designed from 14.4 min to 16.1 min HRT of CSOs flow at design rainfall intensity. Owing to all storage tanks are connected to interception sewer having a redundancy, the suggested volume could be cut down.

• Journal of Positioning, Navigation, and Timing
• /
• 제12권1호
• /
• pp.11-22
• /
• 2023

In this paper, we propose an efficient satellite selection method for multi-constellation GNSS. The number of visible satellites has increased dramatically recently due to multi-constellation GNSS. By the increased availability, the overall GNSS performance can be improved. Whereas, due to the increase of the number of visible satellites, the computational burden in implementing advanced processing such as integer ambiguity resolution and fault detection can be increased considerably. As widely known, the optimal satellite selection method requires very large computational burden and its real-time implementation is practically impossible. To reduce computational burden, several sub-optimal but efficient satellite selection methods have been proposed recently. However, these methods are prone to the local optimum problem and do not fully utilize the information redundancy between different constellation systems. To solve this problem, the proposed method utilizes the inter-system biases and geometric assignments. As a result, the proposed method can be implemented in real-time, avoids the local optimum problem, and does not exclude any single-satellite constellation. The performance of the proposed method is compared with the optimal method and two popular sub-optimal methods by a simulation and an experiment.

• 보건의료산업학회지
• /
• 제11권2호
• /
• pp.129-142
• /
• 2017

Objectives : The purpose of this study was to identify the main variables of difference in high school students' oral health promotion behaviors among adolescents and to improve their academic and oral health promotion behaviors. Methods : The research subjects consisted of 311 high school students in Jeonju. Results : The adequacy of the hypothetical model accounted for 46.9 % of the oral health promotion behavior. The Redundancy of all variables showed the value of the positive values, indicating that the Goodness of fit was greater than the optimum value of the model, and the model of the PLS was a desirable model. The effects of perceived benefits, self efficacy, and social support on oral health promotion behaviors were found to be higher in oral health promotion behaviors. Conclusions : This study is expected to have a significant impact on the perception of the oral health promotion for adolescents in the future and will contribute to the expansion and generalization of Pender's oral health promotion model.

• 해양환경안전학회지
• /
• 제8권1호
• /
• pp.127-137
• /
• 2002

This paper deals with developing a Web-based Solver NRO(Network Reliability Optimizer) for solving three classes of reliability redundancy optimization problems which are generated in series systems. parallel systems and complex systems. Inputs of NRO consisted in four parts. that is, user authentication. system selection. input data and confirmation. After processing of inputs through internet, NRO provides conveniently the optimal solutions for the given problems on the Web-site. To alleviate the risks of being trapped in a local optimum, HH(Hybrid-Heuristic) algorithm is incorporated in NRO for solving the given three classes of problems, and moderately combined GA(Genetic Algorithm) with the modified SA(Simulated Annealing) algorithm.

• 한국통신학회논문지
• /
• 제32권3C호
• /
• pp.195-204
• /
• 2007

The cyclic redundancy check(CRC) code used to decide retransmission request in hybrid automatic repeat request(HRAQ) system can also be used to stop iterative decoding of turbo code if it is used as an error correcting code(ECC) of HARQ system. Thus a scheme to use CRC code for both iteration stop and repeat request in the HARQ system with turbo code based on the standard of cdma 2000 system is proposed in this paper. At first, the optimum CRC code which has the minimum length without performance degradation due to undetected errors is found. And the most appropriate turbo encoder structure is also suggested. As results, it is shown that at least 32-bit CRC code should be used and a turbo code with 3 constituent encoders is considered to be the most appropriate one.

• ETRI Journal
• /
• 제33권5호
• /
• pp.759-769
• /
• 2011

Cooperative hybrid-automatic repeat request (HARQ) protocols, which can exploit the spatial and temporal diversities, have been widely studied. The efficiency of cooperative HARQ protocols is higher than that of cooperative protocols because retransmissions are only performed when necessary. We classify cooperative HARQ protocols as three decode-and-forward-based HARQ (DF-HARQ) protocols and two amplified-and-forward-based HARQ (AF-HARQ) protocols. To compare these protocols and obtain the optimum parameters, two unified frameworks are developed for protocol analysis. Using the frameworks, we can evaluate and compare the maximum throughput and outage probabilities according to the SNR, the relay location, and the delay constraint. From the analysis we can see that the maximum achievable throughput of the DF-HARQ protocols can be much greater than that of the AF-HARQ protocols due to the incremental redundancy transmission at the relay.

• International Journal of Automotive Technology
• /
• 제4권3호
• /
• pp.135-140
• /
• 2003

In the deterministic optimization of a structural system, objective function, design constraints and design variables, are treated in a nonstatistical fashion. However, such deterministic engineering optimization tends to promote the structural system with lest reliability redundancy than obtained with conventional design procedures using the factor of safety. Consequently, deterministic optimized structures will usually have higher failure probabilities than unoptimized structures. Therefore, a balance must be developed between the satisfactions of the design requirements and the objectives of reducing manufacturing cost. This paper proposes the reliability-based design optimization (RBDO) technique, which enables the optimum design that considers confidence level for the vibration characteristics of structural system. Response surface method (RSM) is utilized to approximate the performance functions describing the system characteristics in the RBDO procedure. The proposed optimization technique is applied to the pillar section design considering natural frequencies of a vehicle structure.