• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.46-48
• /
• 2007

In this study, we determined the optimum electrode pair for measuring the abdominal pressure using bio-impedance method. Because impedance changes differ from a weight, a height, contractile force, volume of muscle and blood other or whatever of individuals, it was quantified using values of impedance change, correlation coefficient and SNR. Our results showed the optimum electrode pair (1, 9) which could detect impedance changes due to an increase of the intensity of the abdominal pressure. The correlation coefficient and quadratic function between the RMS values of EMG and the impedance changes were 0.87 and $y=0.0014x^2$+0.0620x+0.6958, respectively. It demonstrated that the abdominal pressure could be measured non-invasively and simply using bio-impedance method. We propose that this optimum electrode configuration would be useful for future studies involving the convenient measurement of abdominal pressure by ambulatory urodynamics monitoring study.

• Journal of the Korean Wood Science and Technology
• /
• 제8권2호
• /
• pp.6-8
• /
• 1980

일본 잎갈나무, 삼나무, 편백의 로타리단판 절삭 적정 노스바압축도를 얻기 위해서 노스바압축도 5%, 10% 15%의 조건으로 절삭된 단판의 이활, 인장 강도를 시험하여 다음과 같은 결론을 얻었다. 1. 일본잎갈나무 2mm단판의 적정 노스바압축도는 15%이었고, 2. 삼나무 2mm 단판의 적정 노스바압축도는 5%이었으며, 3. 편백 2mm 단판의 적정 노스바압축도는 15%이었다.

• 한국공작기계학회논문집
• /
• 제12권2호
• /
• pp.37-43
• /
• 2003

This study makes to flow analysis of computational fluid dynamics(CFD) according to the basic theory of turbulent flow regarding high-pressure injection nozzle. It also makes structural analysis to find out the structural validity of the optimum shape of high-pressure injection nozzle. It divides to two areas such as plunger areas and high-pressure injection nozzle area including plunger.

• 한국지반공학회논문집
• /
• 제19권2호
• /
• pp.217-225
• /
• 2003

지반보강 그라우팅은 대상지반의 공학적 특성 및 사용 목적에 따라 주입재 종류, 주입압력, 주입량 등을 적절히 선택해야 효율적이고 경제성 있는 시공이 될 수 있다. 특히, 압력 그라우팅 공법을 견고한 암반층이 아닌 일반 토사층에 적용시 압력이 높은 경우 수압파쇄에 의한 주입재 이탈 등의 문제가 발생하기 쉬우므로 현장조건에 알맞는 주입압력을 미리 설정하는 것이 필요하다. 이 연구는 느슨 내지 중밀 정도의 쇄석과 모래를 이용한 실험실 모형시험을 통하여 적정 주입압과 주입방법을 밝히기 위해 수행되었다. 최적 주입압, 주입량 그리고 주입시간을 조사하기 위해 실험과정에서 주입조건을 변화시켰다. 시험결과로부터 쇄석 및 모래지반에서 압력그라우팅의 최적 주입압은3~4kg/$cm^2$ 임을 알 수 있었다.

• 연구논문집
• /
• 통권29호
• /
• pp.185-194
• /
• 1999

The shape and thickness distribution according to the pressure-time curve were carried out using the FEM and experiment. Also, mechanical properties were investigated. The square cup parts have been formed with pressure-time curve generated by result of analysis. The tensile strength and elongation have been investigated according to applied pressure conditions using the tensile test specimen obtained from the superplastic formed cup. We can use to predict the shape of formed part under the applied pressure using the FEM analysis. In the case of optimum pressure condition, the thickness distribution and mechanical properties were improved. From this study, we can find the important of optimum pressure-time condition. We have investigated about the forming of airplane part and fuel tank for motorcycle. If the applied load used in boundary conditions was appropriate, the simulation result coincides with the formed part. However, it is very difficult to define the pressure condition in complicated shape. Thus, it is need to develop the optimum pressure condition for superplastic forming.

• 전기학회논문지
• /
• 제56권7호
• /
• pp.1339-1342
• /
• 2007

In this study, we determined the optimum electrode pair for measuring the abdominal pressure using bio-impedance method and compared with conventional methods. Because impedance changes differ from a weight, a height, contractile force, volume of muscle and blood other or whatever of individuals, it was quantified using values of impedance change, correlation coefficient and SNR. Our results showed the optimum electrode pair (1, 9) which could detect impedance changes due to an increase of the intensity of the abdominal pressure. The correlation coefficient and quadratic function between the RMS values of EMG and the impedance changes were 0.87 and $y=0.0014x^2+0.0620x+0.6958$, respectively. It demonstrated that the abdominal pressure could be measured noninvasively and simply using bio-impedance method. We propose that this optimum electrode configuration would be useful for future studies involving the convenient measurement of abdominal pressure by ambulatory urodynamics monitoring study.

• Tribology and Lubricants
• /
• 제10권4호
• /
• pp.33-42
• /
• 1994

An influence of inlet pressure on the performance of sector-shaped pad thrust bearings is investigated theoretically. The optimum conditions of film thickness or the optimum positions of pivot are found through the evaluation of load capacity for all available conditions of film thickness, under the operating conditions which the thermal and pad deformation effects can be neglected. The bearing performance including the inlet pressure effects is obtained for a wide operating ranges that inertia parameter(Re$^{*}$) is up to unity, and for the various cases of pad extent angle (number of pad) and the three cases of the angle between pads. The results show that the inlet pressure has a large influence on the performance of sector-shaped pad thrust bearings. In the design of sector-shaped pad bearings, due to the inlet pressure, the optimum number of pad is varied with the operating speed and the angle between pads, and the optimum position of pivot is located toward the leading edge along with the operating speed increases.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.403-407
• /
• 2012

본 연구의 목적은 최적화 해석 기법을 이용하여 복합재 압력용기의 스커트 치수를 도출하는 것이다. 복합재 압력용기의 스커트 최적화 해석은 부분문제 근사법(sub-problem approximation method) 알고리즘을 사용하였으며, APDL(ANSYS Parametric Design Language)을 이용하여 해석의 모든 과정을 일괄처리(batch processing)하였다. 설계변수로는 압력용기 스커트 부위의 두께와 길이를 선정하였으며, 내압에 의해 발생하는 변위와 무게를 각각 목적함수로 하여 최적화 해석을 통해 최적의 스커트 치수를 도출하였다. 그 결과 복합재 압력용기의 스커트 무게를 최대 4.38% 절감할 수 있었다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제17권1호
• /
• pp.1-6
• /
• 2009

The optimum design of back pressure chamber is one of the most important factors in designing scroll compressors because it has a great influence on the efficiency and other design parameters. The design process can be divided into 2 parts. One is obtaining the optimum pressure of the chamber and keeping it in constant value. The other is finding out the minimum inflow rate of medium with which back pressure chamber is filled. In this study we are focused on the first step. At first we added a simple structure that can change back pressure without reassembling compressor. It makes possible to obtaining optimum back pressure. Then we designed an equipment that the back pressure control valve assembly could be independently tested with. Spring was redesigned to decrease stiffness variation. Also sealing mechanism of back pressure control valve was improved to more effective way. As a result, it was verified that in a real mode test back pressure variation could be retained in 2.3% with discharge pressure and operating frequency varied. In addition the integrated structure of back pressure control valve is expected to contribute to effective manufacturing process.

• 한국정밀공학회지
• /
• 제21권7호
• /
• pp.179-184
• /
• 2004

In this work, a copper-clad aluminum composite was fabricated using hot hydrostatic extrusion with various extrusion ratios (8.5, 19, 49) and semi-die angles (30, 45, 60 degree) at a temperature of 32$0^{\circ}C$, Material characteristics of copper-clad aluminum composites were determined from compression tests and hardness tests The results showed that for ER of 8.5, the optimum semi-die angle was below or equal to 30 degree and a pressure drop was about 31%. For ER of 19, the optimum semi-die angle was in the range of 40 to 50 degree and a pressure drop was about 38%. In the case of ER=49, the optimum semi-die angle was above or equal to 60 degree and a pressure drop was about 36%. Compressive yield strength was maximum for ER of 8.5 and semi-die angle of 30 degree and the value of maximum was 155 MPa. Uniform hardness distribution was obtained as the extrusion ratio increases and the semi-die angle decreases. In the case of ER=8.5 and semi-die angle of 30 degree, the lowest extrusion pressure and the maximum compressive yield strength was obtained. Therefor, it was concluded that the optimum extrusion condition for fabricated copper-clad aluminum composites under hydrostatic pressure environment was ER of 19 and semi-die angle of 30 degree.