• 한국도로학회논문집
• /
• 제18권6호
• /
• pp.105-113
• /
• 2016

OBJECTIVES : This study is to develop the optimum mixing proportions for cement concrete pavement with using recycled aggregates. METHODS : The mixture varied recycled coarse aggregates content from 50 % to 100 % to replace the natural coarse aggregates by weight. Tests for fundamental properties as a cement concrete pavement were conducted before and after hardening of the concrete. RESULTS : It was found that the variation in the amount of the recycled aggregate affected the compressive and flexural strength development, as well as the chloride ion penetration resistance. As the amount of the recycled aggregate content increased the compressive and flexural strength and the resistance to chloride ion penetration decreased. However, the resistance to freeze-thaw reaction was affected significantly. In addition, the gradation of the aggregate became worse and hence so did the coarseness factor as the recycled aggregate amount increased. CONCLUSIONS : The fundamental properties of the concrete with recycled aggregate does not seem to be appropriate when the recycled aggregate quality is not guaranteed up to a some level and its replacement ratio is over 50%. The optimized gradation of the aggregates should also be sought when the recycled aggregate is used for the cement concrete pavement materials.

• 한국농공학회지
• /
• 제27권4호
• /
• pp.53-60
• /
• 1985

The plaster mixed to loam and sandy soil from 4 to 12 percent by dry soil weight, and the compaction, permeability, CBR, unconfined compressive strength and freezingthawing test were performed The results obtained are summarized as follows; 1.The coefficient of permeability reduced sharply at the plaster content of 4 percent, and in the CBR test, the swelling ratio reduced by the increment of plaster content. 2.The addition of plaster increased the unconfined compressive strength by the cementing effect, and it was found that the optimum plaster content, existed with the soil type, which showed the maximum strength 3.It was possible to enhance the unconfined compressive strength of the gypsum-lime-soil mixtures when the optimum content of plaster was mixed to the hydrated lime. 4.In case of sandy soil, the relative frost heave decreased with the mixture of plaster, however in loam soil, the relative frost heave began to increase at the plaster content of 12 percent than non-treated soil. Therefore the optimum plaster content existed for protecting frost heave by the different soil type. 5.The above summarized results make it possible to expect the effects such as improvement of soil properties, decrement of permeability, increment of unconfined compressive strength, and protection of frost heave, etc, therefore, it is considered that it is possible to it is plaster as sub-base materials of road.

• 한국추진공학회지
• /
• 제3권4호
• /
• pp.38-43
• /
• 1999

본 연구는 액체 추진제 로켓 엔진의 연소성능을 평가할 수 있는 절차를 확립하고, 운동량비와 혼합비가 연소성능에 미치는 영향을 고찰하여 안정된 연소를 보장하면서 최대의 효율을 제공하는 설계조건을 결정하고자 수행되었다. 연구를 위해 질산/Kerosene을 추진제로 사용하고 추력 24 $\iota{b}_f$, 연소실 압력 200 psia, uni-element impinging streams doublet injector를 사용하는 엔진을 설계 및 제작하여 연소시험을 수행하였다. 연구로부터 점화시 발생하는 hard start 현상은 연소실 압력을 설계치의 25 % 정도가 되도록 한 후, 설계 압력으로 상승시키는 2단계 점화방법을 채택함으로서 최소화 할 수 있었다. 그리고 최대의 연소성능은 혼합비 3.6에 존재하였고, 연소성능은 운동량비 증가에 따라서 감소하였다.

• 한국염색가공학회지
• /
• 제28권3호
• /
• pp.125-133
• /
• 2016

In this study, efforts were made to enhance the mechanical properties of the poly(vinyl alcohol) (PVA) fibers of medium molecular weight(number-average degree of polymerization=1735) varying the ratio in $DMSO/H_2O$ mixed solvent and spinning/drawing conditions. The gel fibers prepared from pure DMSO were opaquely frozen in the coagulating bath of $-20^{\circ}C$. However, transparent gel fibers were formed without freezing for the mixture to contain water less than 80wt%. As the amount of water in the mixture increased the residual solvent in the coagulated gel fibers decreased ranging from 85 to 42wt%. The complex viscosity increased with increasing PVA concentration in 80/20 $DMSO/H_2O$ exhibiting remarkable shear thinning at 18wt%. In the Cole-Cole plot, the 18wt% PVA solutions gave a deviated curve from 12 and 15wt% ones. Thus the optimum PVA concentration for the spinning processing of medium MW PVA solutions in 80/20 $DMSO/H_2O$ was determined to 18wt% with rheological concept. Low degree of drawing during hot drawing process in the dry state was available for high bath draft in the coagulation bath. The most improved mechanical properties were observed by applying the highest possible draw ratio attained by reducing bath draft over multi-step drawing process. In the given bath draft, linear relationship was observed between both tensile strength and modulus and draw ratio showing the inflection points at the draw ratio of 19.5 and 18.0 for tensile strength and modulus, respectively.

• 한국토양비료학회지
• /
• 제47권6호
• /
• pp.480-485
• /
• 2014

In satsuma mandarin (C. unshiu Marc. cv. Miyagawa), alternate bearing is frequently occurred. It is very difficult to control and maintain the optimum production because satsuma mandarin is a very sensitive citrus cultivar. We carried out the experiment to find out the effects of foliar application of gibberellic acid ($GA_3$) and machine oil emulsion mixture on flowering and fruit quality of satsuma mandarin grown on open field. The treatments were composed of control (no application), $GA_3$ (25, 50 and $100mg{\cdot}L^{-1}$), machine oil emulsion 100 times and mixture of $GA_3$ (25 and $50mg{\cdot}L^{-1}$) with machine oil emulsion 100 times on 16 year-old 'Miyagawa' satsuma mandarin on December 30, 2012. Foliar application of $GA_3$ during winter season led to a reduction of the flowering in the following year. $GA_3$ decreased flowering in dose dependant manner. However, application of $GA_3$ and machine oil emulsion (100 times-diluted mixture) inhibited effectively the flowering compared to $GA_3$ only. Also, flower-leaf ratio was significantly decreased by the application of $GA_3$ 25 (0.54) and $50(0.41)mg{\cdot}L^{-1}$ with machine oil emulsion mixture in comparison to $GA_3$ 25 (0.86) and $50(0.60)mg{\cdot}L^{-1}$ only. The number of leaves per fruit increased in application of $GA_3$ and machine oil emulsion mixture as concentration of $GA_3$ increased. Fruit weight and sugar-acid ratio also increased in comparison to the control whereas fruit size, soluble solid content and acidity remained unchanged. From the results, it was suggested that $GA_3$ application can reduce the number of flowers on the alternate bearing of satsuma mandarin. Moreover, application of $GA_3$ (25 and $50mg{\cdot}L^{-1}$) with machine oil emulsion 100 times mixture can reduce the flowering effectively without altering fruit maturity and soluble solid contents. Therefore, it can be concluded that the application of $GA_3$ 25 and $50mg{\cdot}L^{-1}$ with machine oil emulsion 100 times might be useful in controlling alternate bearing in satsuma mandarin.

• 한국환경과학회지
• /
• 제27권9호
• /
• pp.737-742
• /
• 2018

Livestock manure treatments have become a more serious problem because massive environmental pollutions such as green and red tides caused by non-point pollution sources from livestock manures have emerged as a serious social issue. In addition, more food wastes are being produced due to population growth and increased income level. Since the London Convention has banned the ocean dumping of wastes, some other waste treatment methods for land disposal had to be developed and applied. At the same time, researches have been conducted to develop alternative energy sources from various types of wastes. As a result, anaerobic digestion as a waste treatment method has become an attractive solution. In this study has three objectives: first, to identify the physical properties of the mixture of livestock wastewater and food waste when combining food waste treatment with the conventional livestock manure treatment based on anaerobic mesophilic digestion; second, to find the ideal ratio of waste mixture that could maximize the collection efficiency of methane ($CH_4$) from the anaerobic digestion process; and third, to promote $CH_4$ production by comparing the biodegradability. As a result of comparing the reactors R1, R2, and R3, each containing a mixture of food waste and livestock manure at the ratio of 5:5, 7:3, and 3:7, respectively, R2 showed the optimum treatment efficiencies for the removal of Total Solids (TS) and Volatile Solids (VS), $CH_4$ production, and biodegradability.

• 펄프종이기술
• /
• 제33권4호
• /
• pp.15-20
• /
• 2001

The function of the moisture-proof paper is to prevent moisture from adsorbing into the packed goods. Water-vapor transmission rate of the moisture-proof paper should be less than 100g/$m^2$.24hr and the optimum rate would be less than 50g/$m^2$.24hr. In general the moisture-proof paper has been made by laminating polyethylene or polypropylene on top of the base paper. However this kind of moisture-proof paper has a problem in recycling so that it brings about environmental pollution. In general the moisture-proof paper has been made by laminating polyethylene or polypropylene on top of the base paper. However this kind of moisture-proof paper has a problem in recycling so that it brings about environmental pollution. The purpose of this paper was to make moisture-proof paper using the mixture of SB latex and wax emulsion which was recyclable and environmentally friendly. Water vapor transmission rate showed less than 50g/$m^2$.24hr in mixture ratio of 85:15, 87:13, 90:10. Especially the mixture ratio of 87:13 showed the most favorable water-vapor transmission rate. However, the moisture-proof layer was destroyed slightly by folding in packing. It has been observed that there was no close relationship between water-vapor transmission rate of the moisture-proof paper and grammage of the base paper, but the density of base paper had influenced on water vapor transmission rate. It was also observed that the moisture-proof paper could be recycled. The moisture-proof paper was similar to base paper in degree of the pulping, and there was no significant difference in dispersion between moisture-proof paper and base paper. Most of wax particles which caused the spots during drying process could be removed by flotation process. Tensile strength and tear strength of both moisture-proof paper and base paper after pulping were measured to examine the fiber bonding, and no significant difference in physical properties was observed.

• 자원리싸이클링
• /
• 제17권1호
• /
• pp.29-37
• /
• 2008

최근 국 내외에서 폐유리의 발생량이 증가하고 있으며 대부분의 폐유리량은 재활용 및 재생산으로 활용되고 있다. 하지만 재활용되지 못한 폐유리는 매립되어 2차적인 환경문제를 야기 시키고 있는 실정이다. 폐유리 미분말의 5% 혼합에 따라 페이스트 평균점도(레올로지)는 22.3% 감소하였으며, 모르타르의 플로우 및 재령 28일 압축강도는 약 1.5%및 6%감소하였다. 또한 굳지 않은 자기 충전 콘크리트의 폐유리 미분말 혼합률이 증가할수록 유동성은 증가하였으며 압축강도는 감소하였다. 자기충전 콘크리트의 JSCE 2등급 규정에 만족하는 유동성 및 적정 압축 강도를 고려한다면, 폐유리 미분말의 최적 혼합률 20%를 찾을 수 있었다.

• Fisheries and Aquatic Sciences
• /
• 제22권5호
• /
• pp.11.1-11.8
• /
• 2019

Background: In the present study, the skin-whitening effects of a marine-sourced mixture that includes a fucoidanrich extract of Undaria pinnatifida (UPEF), a phlorotannin-rich extract of Ecklonia cava (ECE), and glycosaminoglycans (GAGs) from sea squirt skin were investigated. Methods: The whitening effects of the mixture and its components were evaluated by measuring the inhibition of mushroom tyrosinase and melanin synthesis in alpha-melanocyte-stimulating hormone (${\alpha}$-MSH)-stimulated B16F10 melanoma cells. Results: Each component alone markedly inhibited mushroom tyrosinase in a dose-dependent manner, and in ${\alpha}$-MSH-stimulated B16F10 cells, they inhibited melanin synthesis and were cytotoxic. However, the whitening effects of UPEF, ECE, and GAGs in combination were greater than those of each component alone. A mixture in the ratio of 4:5:1 (UEG-451) showed the strongest activity without cytotoxicity. Further study suggested that UEG-451 inhibits ${\alpha}$-MSH-stimulated melanogenesis in B16F10 cells by downregulating tyrosinase and tyrosinase-related proteins, such as TRP-1 and TRP-2, via the inhibition of MITF expression. Conclusions: These results suggest that mixing the different components at optimum ratios might be an effective way to improve their bioactivities and reduce toxicity and that UEG-451 possesses strong whitening effects that could be used in the cosmetic industry.

• 한국지반환경공학회 논문집
• /
• 제6권4호
• /
• pp.5-12
• /
• 2005

본 연구에서는 매립장 침출수를 처리하기 위해 물리적인 차수기능만 하고 있는 차수벽체 대신 매립장 안에서 직접 정화 처리 하여 지반으로 유출 시킬 수 있는 투수벽체의 시공에 대한 지반공학적 적용성을 평가하였다. 이를 위해 투수성이 높은 모래와 점착력을 가진 황토를 중량비에 따라 배합하고 벤토나이트의 함량을 변화시켜가며 공시체를 성형하여 일축압축강도시험과 투수시험을 실시하였다. 이 실험에서 매립지의 일축압축강도 규정($5kgf/cm^2$)을 만족하고 투수계수가 $10^{-3}{\sim}10^{-4}cm/sec$인 최적배합비는 모래와 황토의 배합비율이 8 : 2이고 벤토나이트의 함량은 2%일 때였다. 그리고 좀 더 나아가 이러한 데이터를 바탕으로, 현장실험을 통하여 다양한 현장에 대한 적용성을 평가할 것이다.