• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.3
• /
• pp.77-84
• /
• 2002

Measurements of NO and NOx emission of laminar partially premixed LPG/air flames with and without acoustic excitation are reported. The NOx emission at the tailpipe of a combustion chamber is determined by chemiluminescent analyser. The NOx measurements are taken in flames with several different center tube equivalance ratio( ø$\sub$o/), and overall equivalace ratio(ø$\sub$o/) for a fixed fuel flowrate. The NOx emission decrease to reach a minimum value at an optimum ø$\sub$c/ 2. Theø$\sub$c/ 2 flame gives a compromise of thermal NO and prompt NO mechanism. In the case of excitation. the visual shape of the flame is changed from laminar flame to turbulent-like flame. With increasing levels of excitation amplitude, an optimum value of the NO and NOx emission exists. A shorter flame caused by the enhanced upstream mixing due to acoustic excitation results in the reduction of NO and NOx emission in the present flames. The reduction of flame length affects the shorter residence time of center tube mixture, and significantly influences the NOx reduction.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.719-720
• /
• 2004

A multi-megawatt long pulse ion source (LPIS) of neutral beam injector was developed for the KSTAR. Beam extraction experiments of the LPIS were carried out at the neutral beam test stand (NBTS). Design requirements for the ion source were 120 kV/65 A deuterium beam and a 300 s pulse length. A maximum ion density of $9.1310^{11}$ $cm^{-3}$ was measured by using electric probes, and an optimum arc efficiency of 0.46 A/kW was estimated with ion saturation current of the probes, arc power, and total beam area. An arcing problem, caused by the structural defect of decelerating grid supporter, in the third gap was solved by the blocking of backstream ion particles, originated from the plasma in the neutralizer duct, through the unnecessary spaces on the side of grid supporter. A maximum drain power of 1.5 MW (i.e. 70 kV/21 A) with hydrogen was measured for a pulse duration of 0.5 s. Optimum beam perveance was ranged from 0.75 to 0.85. An improved design of accelerator for the effective control of beam particle trajectory should provide higher beam perveance.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.633-636
• /
• 2005

An electro-optical camera system consists of many subsystems such as the optics, the detector, and the electronics and so on. They may create variations in the processed image that were not present original scene. The performance analysis of the electro-optical camera system is a mathematical construct that provides an optimum design through appropriate trade off analysis. The SNR(Signal to Noise Ratio) is one of the most important performance for the electro-optical camera system. The SNR analysis shown in this paper is performed based on the practical high resolution satellite camera design. For the purpose of the practical camera design, the analysis assumes that the defined radiance, which is calculated for the Korean peninsula, reached directly to the telescope entrance. In addition, the actual operation concept such as integration time and the normal operation altitude is assumed. This paper compares the SNR analysis results according to the various camera characteristics such as the optics, the detector, and the camera electronics. In detail, the optical characteristics can be split into the focal length, F#, transmittance, and so on. And the system responsivity, the quantum efficiency, the TDI stages, the quantization noise and the analogue noise can be used for the detector and the camera electronics characteristics. Finally this paper suggests the optimum design to apply the practical electro-optical system.

• Journal of the Korea Furniture Society
• /
• v.22 no.1
• /
• pp.18-25
• /
• 2011

This experiment was carried out to investigate the effects of nail diameter, driving distance from end on the nail check length, and the effects of nail diameter, prehole for nail driving, and nail driving slope on the nail withdrawal resistance, by the static test of universal testing machine. The test specimen were Japanese cedar (Cryptomeria japonica D. Don.) boards grown in southern district of Korea, and the nails for test were 2.02～4.82 mm in diameter. After nail driving, the back face checks of test boards were longer than the surface checks. The optimum nail diameter without checks or loss of nail withdrawal resistance were below 10% of board width and the optimum driving distance from end of boards were ten multiple of nail diameter. The relation between nail diameter (x) and withdrawal resistance (y) was linear and the regression formulae for Japanese cedar board was y = 8.66x + 7.6 ($R^2=0.978$). As both of the prehole diameter and driving slope were increased, the withdrawal resistances were significantly decreased.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.2
• /
• pp.86-94
• /
• 1997

For the efficient operation and maintenance( 0 & M), irrigation facilities were graded on the basis of their indices related to the 0 & M condition and the characteristics of reservoirs managed by Farmland Improvement Association(FIA) were examined. The results obtained are summarized as follows : 1. Characteristics of reservoirs include effective storage capacity, irrigation area, basin area, height and length of bank. Each characteristic is scored by the principle component analysis method. Variables which compose one index are categorized on the basis of their unit and each variable is scored so that the score of each unit sums to 100 for each index. 2. The Optimum MAnagement System of Irrigation Facilities(OMASIF) for Pyoungtaek area was developed by connecting general data of the irrigation facilities to image data. The database system is divided into three tables; LookUp Table, Facility Table, and Image Table. Image Table is again divided into five sub-tables, Image Table, Construction Cost Table, Acreage Table, 0 & M Cost Table, and Specification Table. 3. The evaluating criteria for the 0 & M of irrigation facilities can be established using the OMASIF. Irrigation facilities evaluated as poor state by the criteria should be repaired.

• Journal of Sericultural and Entomological Science
• /
• v.31 no.1
• /
• pp.12-19
• /
• 1989

Experiments were conducted to investigate the optimum season for mulberry graftages harvesting before the period of natural leaf fall in autumn. Harvesting season was examined at 10 days intervals from September 30 to November 20, 1985 and 1986, at nine sites in eight provinces. The results were : 1. Diameter of graftages increased until October 30. 2. Early harvest of graftages decreased survived rate, number of shoots, and total shoot length the next spring. The October 30 harvest yielded the best growth the following spring. 3. Harvests after October 20 allowed for good survial of mulberry shoots and sprouting the following spring. 4. Total N and P in plants increased with late harvests, K decreased, and Ca content was not affected by harvest date. 5. Total N, P, and Ca were higher in stem cortex than root bark, while K appeared to be equally distributed between root and shoot bark.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.15 no.4
• /
• pp.274-278
• /
• 1995

This experiment was conducted to know what does the cutting date have an effect on the chemical composition and nutritive yield of Miscanthus sinensis, in order to determine the optimum cutting date of the plant when it is utilized as roughage. Miscanthus sinensis growing natively in the summit of Sam Ak mountain(550m above sea level) was cut at 10 days intervals from 25 July to 15 October, 1988. Plant length and dry matter contents were generally increased with delayed cutting date. Crude protein contents of the plant cut on 5, 15, and 25 of September were 5.5, 5.2 and 5.1%, respectively. Cmde fiber contents was similar with cutting treatment and averaged 35.6%. Cmde protein yield was higher in September than in other cutting date. Yield of crude fiber were 8.3, 9.3 and 9.3t/ha on 5, 15 and 25 September, respectively. Ratio of Cmde protein yield to Crude fiber yield on 5 September tended to be higher than on 15 September and 25 September. These results suggest that the optimum cutting date of the Miscanthus sinensis for good quality forage seems early September.

• Steel and Composite Structures
• /
• v.28 no.4
• /
• pp.427-438
• /
• 2018

Static stability is a decisive factor in the design of domes. Stability-related external factors, such as load and supports, are incorporated into structural vulnerability theory by the definition of a relative rate of joint well-formedness ($r_r$). Hence, the instability mechanism of domes can be revealed. To improve stability, an optimization model against instability, which takes the maximization of the lowest $r_r$ ($r_{r,min}$) as the objective and the discrete member sections as the variables, is established with constraints on the design requirements and steel consumption. Optimizations are performed on two real-life Kiewitt-6 model domes with a span of 23.4 m and rise of 11.7 m, which are initially constructed for shaking table collapse test. Well-formedness analyses and stability calculation (via arc-length method) of the models throughout the optimization history demonstrate that this proposed method can effectively enhance $r_{r,min}$ and optimize the static stability of shell-like structures. Additionally, seismic performance of the optimum models subjected to the same earthquake as in the shaking table test is checked. The supplemental simulations prove that the optimum models are superior to the original models under earthquake load as well.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2697-2701
• /
• 2012

The yield of OTP devices using anti-fuse MOS capacitor have been affected by the input resistance, the size of the pass transistor and the read transistor, and the readout voltage of programed cell. To investigate the element which gives an effect to yield, we analyze the full map data of the resistance characterization of OTP device and those data in a various experimental condition. As a result, we got the optimum conditions which is necessary to the yield improvement. The optimum conditions are as follows: Input resistance is 50 ohms, the channel length of pass transistor is 10um, read voltage is 2.8 volt, respectively.

• Journal of Ginseng Research
• /
• v.8 no.1
• /
• pp.65-74
• /
• 1984

This experiment was carried out to study the effects of light intensity and soil water regimes on the growth of ginseng seedling. The results were as follows: 1. The maximum light intensity and optimum temperature in 1,le photosynthesis of ginseng seedling were 10,000 lux and 23 $^{\circ}C$. Respiration rate was increased at high temperature. 2. Air and soil temperature under the shading were increased as the increase of light intensity but soil water contents were decreased as the increase of light intensity, whereas air and soil temperature were decreased as the increase of precipitation under the shade b5: soil water contents were increased as the increase of precipitation under the shade. 3. The higher the transmittance of the shade, the greater the specific leaf weight (S.L.W.) and stomatal density. In contrast, however, the contents of total chlorophyll, chlorophyll a and b, and stomatal length was decreased. There was no any significant difference light intensity of the a/b ratio of chlorophyll. 4. The highest photosynthesis was occurred in ginseng leaves grown under the shade 5% L.T.R. and net photosynthesis rates increased with increasing soil water contents. 5. Optimum condition for usable seedling yield were 5% L.T.R. and 3.3% precipitation under the shade. Useless seedling increased with increasing precipitation under the shade.