• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.621-624
• /
• 2006

This paper presents a novel optimum technique for optimum mix-proportion using database-based prediction model of material properties for an object function or a constraint condition. The proposed technique provides high reliability of results introducing effective region model, which assesses whether the prediction model is effective or not, in optimization process. In order to validate the proposed technique, a genetic algorithm was adopted as a optimum technique, and an artificial neural network was adopted as a prediction model for material properties and as a model for assessing effective region. The mix-proportion obtained from the proposed technique is more reasonable than that obtained from a general optimum technique.

• KSBB Journal
• /
• 제13권1호
• /
• pp.20-25
• /
• 1998

Optimum conditions of the cellulose-hydrolysis reaction with mixed enzymes(cellulase extracted from Penicellium funiculosum mixed with $\beta$-glucosidase extracted from Almod) were investigated to increase the production of glucose from cellulose. Experimental result showed that optimum conditions fro pH, activity ratio of $\beta$-glucosidase to cellulase, concentration of mixed enzymes, concentration of cellulose as a substrate, and temperature range were 4.2, 0.4, 0.8, U/mL, 40 g/L, and 37$\pm$3$^\circ C$, respectively. In these conditions, quantities of glucose productions by using mixed enzymes were larger than those by using cellulase at optimum conditions.

• 설비공학논문집
• /
• 제21권10호
• /
• pp.575-582
• /
• 2009

The optimum rotation speed of a desiccant rotor is studied theoretically based on a theoretical solution to the heat and mass transfer processes in the desiccant rotor. A simple correlation equation for the optimum rotation speed is derived to show the effects of various parameters including the thermo-physical properties, the geometric dimension, and the operating condition of the desiccant rotor. The theoretical result is compared with existing experimental data to validate the linearization and simplification included in the solution procedure. Based on the theoretical solution, the effects of major parameters on the optimum rotation speed are studied and the fundamental mechanism of the influences is investigated.

• Structural Engineering and Mechanics
• /
• 제51권3호
• /
• pp.361-375
• /
• 2014

The main aim of this paper is to investigate the relationship between thickness and height of the axially symmetric cylindrical reinforced concrete (RC) walls by the help of a meta-heuristic optimization procedure. The material cost of the wall which includes concrete, reinforcement and formwork, was chosen as objective function of the optimization problem. The wall thickness, compressive strength of concrete and diameter of reinforcement bars were defined as design variables and tank volume, radius and height of the wall, loading condition and unit cost of material were defined as design constants. Numerical analyses of the wall were conducted by using superposition method (SPM) considering ACI 318-Building code requirements for structural concrete. The optimum wall thickness-height relationship was investigated under three main cases related with compressive strength of concrete and density of the stored liquid. According to the results, the proposed method is effective on finding the optimum design with minimum cost.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.33-38
• /
• 1995

In this study, unsistered, pre-sintered and sintered low purity alumina ceramics were machined with various tools to clarify the machniability, the optimum tool materials and the optimum tool materials and the optimum cutting conditions. The maon conclusions obtained were as follows. (1) Machined withalloy steel tool, the machinabilty of te pre-sintered ceramics becomes better with the decrease of pre-sintering temperature, but that of unsintered ceramics(white body) was extremely poor. (2) In the case of carbide tool K01, the tool life in machining white body was the longest, and the machinabilty of pre-sintered ceramics becomes poorer with the increase of the pre-sintering temperature. (3) In the case of ceramic tool, the 10000-1100 .deg. C pre-sintered ceramics showed te best machinability within a certain cutting speed range. So far as dry machining, the above combination and conditions showed the highest productivity. (4) When the pre-sintered ceramics were wet machined withsintered diamond tool, the tool life becomes extremelylong, and higher cutting speed can be can be used than in the case offull-sintered ceramics. The productivity of wet cutting is much higher than that ofdry cutting.

• 전기학회논문지P
• /
• 제55권4호
• /
• pp.155-160
• /
• 2006

In this paper, deduced suitable optimization to request output condition after taking closely characteristic data of single phase induction motor(SIM) which is the possibility becoming economic is coming to be demanded. Motor proper move connection data took advantage of result of existing data and iron loss and copper loss, mechanical loss took advantage of statistical data, and decide motor move laking advantage of saving data and secondary resistance and optimum purpose of method that is proposed through single phase induction motor and comparison performance evaluation having on the same output parameter. That decide material factor, electric power damage ratio, and coefficient of utilization for optimum function by method that search request output and optimum values of efficiency case by case and decided is proper that is saved after take magnetizing reactance relationship. This research result which it sees against a material expense with use coefficient of utilization which is included in loss expense decides the same plan variable back the place efficiency is useful and will be applied.

• KSBB Journal
• /
• 제29권5호
• /
• pp.385-391
• /
• 2014

In this study, the emulsion dispersion stability of optimizing storage temperature was investigated. The system was based on oil/water (O/W) emulsions. In order to evaluate the stability, mean diameter of droplet was measured as a function of temperature with various mixed hydrophilic lipophilic balance (HLB). In addition, the correlations between phase inversion temperature (PIT) and the optimum storage temperature were probed. In this system, majority of the smallest droplet was shown at temperature of $20^{\circ}C$ below PIT. Whether the temperature was increased or decreased from the optimum, size of the droplet increased. According to the mixed HLB, the particle size and optimum storage temperature were also affected. As the concentrations of surfactant were increased, the size of particle decreased with lower optimum temperature for storage. If the surfactant (4 wt%) were mixed with HLB, the optimum storage temperature was $21^{\circ}C$ for maintaining the size of smallest droplet at 108.3 nm in diameter. At above optimum condition, increased size of particle was observed approximately 4 % increases from 108.2 nm to 112.3 nm after 600 hours. The size of particle in emulsion was maintained stably without any considerable effect of Ostwald ripening phenomena at the optimum storage temperature with low polydispersity index.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.111-112
• /
• 2010

• Applied Biological Chemistry
• /
• 제13권2호
• /
• pp.111-129
• /
• 1970

핵산 및 그 관련물질 연구의 일환으로서 미생물 효소에 의하여 핵산을 분해하여 5'-mononucleotides 생성을 목적으로 미생물에서 5'-phosphodiesterase 생성균주를 얻기위하여 전국 각지 76개 지역에서 논, 밭, 산, 하천의 토양 그리고 퇴비, 누룩, 메주 등 시료 210종을 수집하였다. 이 수집 시료로 부터 dilution pour plate method 로서 Aspergillus속 240주, Penicillium속 232주, Neurospora속, 19주, Monascus속 16주, 그리고 Streptomyces속 265주로 총 758주를 순수 분리하였다. 분리된 모든 균주에 대하여 RNA-depolymerase 균의 crude enzyme 중에는 5'-AMP deaminase가 공존하고 있으므로 효소반응 중에 RNA 가 5'-mononucleotide로 분해 축적하는 동안에 5'-AMP의 adenine의 6위치에 붙은 $NH_2$기를 탈아미노하여 hypoxanthine으로 하기 때문에 5'-IMP 로 되는 것이라 생각된다. 분리 동정 된 Penicillium citreo-viride PO 2-11 strain과 Streptomyces aureus SOA 4-21 strain 이 생성한 5'-phosphodiesterase 로서 RNA를 효소 분해하여 5'-mononucleotide 의 정량한 결과는 Table 10과 같다. productivities를 1차 screening 하고 5'-phosphodiesterase productivities로서 2차 screening 하여 우수균주를 얻고 동정하였다. 우수균주의 5'-phosphodiesterase productivity에 대하여 배양상의 optimum condition을 검토하고 5'-phosphodiesterse activity에 미치는 여러 화합물의 영향과 효소반응의 최적 조건을 구명하였다. 우수균주가 생성한 5'-phosphodiesterase에 의하여 RNA 분해로 반응 최종 산물을 ion exchange column chromatography법으로 정량하고 최종 분해 산물엔 5'-mononucleotide를 paper chromatography, thinlayer chromatography, UV-absorption spectra, carbazole reaction 및 Schiff's reaction 등으로 동정한 결과는 다음과 같다. [1] 5'-phosphodiesterase productivity가 가장 우수한 두 균주를 선정하였고 이들은 토양에서 분리 되었으며 선정된 푸른 곰팡이는 Penicillium citreoviride PO 2-11로 동정되었고 방사선균은 Streptomyces aureus SOA 4-21로 동정되었다. [2] 분리 선정 된 Penicillium citreo-viride PO 2-11 strain은 배양상의 optimum condition 이 pH 5.0이고 temperature는 $30^{\circ}C$이었고 이 균이 생성한 5'-phosphodiesterase의 효소 반응상의 optimum condition 이 pH 4.2이고 temperature는 $60^{\circ}C$이었다. 그리고 5'-phosphodiesterase 생성에서 최적 탄소원은 sucrose이고 질소원은 $NH_4NO_3$이고 corn steep liquor나 혹은 yeast extract를 각각 0.01%씩 첨가한 구는 첨가하지 않은 control 구보다 20%의 5'-phosphodiesterase 생성 증가를 나타 내었다. 이 균이 생성한 5'-phosphodiestrase는 $Mg^{++},\;Ca^{++},\;Zn^{++},\;Mn^{++}$ 등 금속이온은 activator이고 EDTA, citrate, $Cu^{++},\;Co^{++}$ 등은 inhibitor 임을 알았다. 이 균이 생성한 5'-phosphodiesterase는 RNA를 분해하여 분해율 65.81%이었고 5'-AMP, 5'-GMP, 5'-UMP 및 5'-CMP를 생성하며 이때 축적되는 5'-mononucleotides중 5'-GMP 만이 정미성이 있음을 알았고 이균은 5'-AMP deamaminase가 없음을 확인하였다. 이 균의 효소에 의하여 RNA에서 정미성 5'-GMP 186.7 mg/RNA(g)를 생산할수 있음을 알았다. [3] 분리 선정된 Streptomyces aureus SOA 4-21 strain은 배양상의 optimum condition이 pH 7.0이고 temperature는 $28^{\circ}C$이었고 이 균이 생성한 5'-phosphodiesterase의 효소반응상의 optimum condition이 pH 7.3이고 temperature는 $50^{\circ}C$이었다. 그리고 5'-phosphodiesterase 생성에서 최적탄소원은 glucose이고 질소원은 asparagine이고 yeast extract 0.01%첨가구가 control 구보다 40%의 5'-phosphodiesterase 생성증가를 나타내었다. 이 균이 생성한 5'-phosphodiesterase는 $Ca^{++},\;Zn^{++},\;Mn^{++}$ 등 금속이온은 activator 이고 citrate, EDTA, $Cu^{++}$ 등은 inhibitor 임을 알았다. 또한 이 균은 5'-phosphodiesterase 뿐만 아니라 5'-AMP deaminase도 생성함을 확인하였다. 그러므로 RNA 분해율은 63.58% 이었고 RNA를 분해하여 5'-AMP, 5'-CMP, 5'-GMP 및 5'-UMP로 축적시키고 RNA가 효소 분해됨과 동시에 5'-AMP deaminase도 작용하며 생성된 5'-AMP 의 60% 상당을 5'-IMP로 전환시키는 특성이 있어서 정미성 5'-mononucleotide 생성이 전자의 균보다 두드러지게 증가함을 밝혔다. 이 균에 의하여 RNA에서 정미성 5'-IMP 171.8 mg/RNA(g) 및 5'-GMP 148.2 mg/RNA(g)생산할 수 있어 정미성 5'-mononucleotide 320mg/RNA(g)를 생산할 수 있음을 알았다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1312-1314
• /
• 1998

SOFC system is often subject to thermal cycle condition during normal start/stop, shutdown, and emergence state. Under the thermal cycle condition of heating and cooling, the SOFC components expand or shrink, which produces thermal stress and thermal shock. The SOFC performance is degraded by the thermal factors. To protect SOFC system from the thermal degradation, the optimum thermal condition must be clarified. In this study, to examine the thermal cycle characteristics, we fabricated single cells of planar SOFC with an area of $5{\times}5cm$. The electrolyte and PEN were tested under thermal cycle conditions in the range of$ 2-8^{\circ}C/min$. After thermal cycle test. crack creation of the components were examined using ultraviolet apparatus. No crack in the electrolyte and PEN were observed. The single cell system with alumina frame were also tested under thermal cycle conditions of 2, 3, $4^{\circ}C/min$. The single cell was fractured at the thermal cycle of 3 and $4^{\circ}C/min$ and the optimum condition of the thermal cycle to be found below $2^{\circ}C/min$.